Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

3 files changed, 7 insertions, 7 deletions

diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig
index ba4267f658af..3ce77f07208a 100644
--- a/arch/blackfin/configs/BF609-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF609-EZKIT_defconfig
@@ -105,7 +105,7 @@ CONFIG_SPI=y
 CONFIG_SPI_ADI_V3=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_BFIN_WDT=y
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index c1acce4c2e45..ce5488e8226b 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -348,14 +348,14 @@ static struct platform_device bfin_i2s = {
 };
 #endif
 
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 #include <linux/spi/mcp23s08.h>
 static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
-	.chip[0].is_present = true,
+	.spi_present_mask = BIT(0),
 	.base = 0x30,
 };
 static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
-	.chip[2].is_present = true,
+	.spi_present_mask = BIT(2),
 	.base = 0x38,
 };
 #endif
@@ -423,7 +423,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 	{
 		.modalias = "mcp23s08",
 		.platform_data = &bfin_mcp23s08_sys_gpio_info,
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 9231e5a72b93..51157a255824 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -1887,7 +1887,7 @@ static struct platform_device i2c_bfin_twi1_device = {
 };
 #endif
 
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 #include <linux/spi/mcp23s08.h>
 static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch0 = {
 	.base = 120,
@@ -1929,7 +1929,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
 #endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
 	{
 		I2C_BOARD_INFO("mcp23017", 0x21),
 		.platform_data = (void *)&bfin_mcp23s08_soft_switch0