Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

28 files changed, 24 insertions, 428 deletions

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 4db5b46e1eff..a6d03069d0ff 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -55,7 +55,6 @@ config CRIS
 	default y
 	select HAVE_IDE
 	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IRQ_SHOW
 
 config HZ
@@ -276,7 +275,6 @@ config ETRAX_AXISFLASHMAP
 	select MTD_CHAR
 	select MTD_BLOCK
 	select MTD_PARTITIONS
-	select MTD_CONCAT
 	select MTD_COMPLEX_MAPPINGS
 	help
 	  This option enables MTD mapping of flash devices.  Needed to use
@@ -297,8 +295,7 @@ config ETRAX_RTC
 choice
 	prompt "RTC chip"
 	depends on ETRAX_RTC
-	default ETRAX_PCF8563 if ETRAX_ARCH_V32
-	default ETRAX_DS1302 if ETRAX_ARCH_V10
+	default ETRAX_DS1302
 
 config ETRAX_DS1302
 	depends on ETRAX_ARCH_V10
diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm
index 517d1f027fe8..67731d75cb51 100644
--- a/arch/cris/arch-v10/README.mm
+++ b/arch/cris/arch-v10/README.mm
@@ -38,7 +38,7 @@ space. We also use it to keep the user-mode virtual mapping in the same
 map during kernel-mode, so that the kernel easily can access the corresponding
 user-mode process' data.
 
-As a comparision, the Linux/i386 2.0 puts the kernel and physical RAM at
+As a comparison, the Linux/i386 2.0 puts the kernel and physical RAM at
 address 0, overlapping with the user-mode virtual space, so that descriptor
 registers are needed for each memory access to specify which MMU space to
 map through. That changed in 2.2, putting the kernel/physical RAM at 
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index b2079703af7e..ed708e19d09e 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -234,7 +234,6 @@ static struct mtd_info *flash_probe(void)
 	}
 
 	if (mtd_cse0 && mtd_cse1) {
-#ifdef CONFIG_MTD_CONCAT
 		struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 };
 
 		/* Since the concatenation layer adds a small overhead we
@@ -246,11 +245,6 @@ static struct mtd_info *flash_probe(void)
 		 */
 		mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds),
 					    "cse0+cse1");
-#else
-		printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
-		       "(mis)configuration!\n", map_cse0.name, map_cse1.name);
-		mtd_cse = NULL;
-#endif
 		if (!mtd_cse) {
 			printk(KERN_ERR "%s and %s: Concatenation failed!\n",
 			       map_cse0.name, map_cse1.name);
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index ea69faba9b62..1391b731ad1c 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -345,7 +345,7 @@ static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned
 	int ret;
 
 	mutex_lock(&pcf8563_mutex);
-	return pcf8563_ioctl(filp, cmd, arg);
+	ret = pcf8563_ioctl(filp, cmd, arg);
 	mutex_unlock(&pcf8563_mutex);
 
 	return ret;
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 399dc1ec8e6f..850265373611 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -31,7 +31,7 @@
 #include <asm/sync_serial.h>
 #include <arch/io_interface_mux.h>
 
-/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
+/* The receiver is a bit tricky because of the continuous stream of data.*/
 /*                                                                       */
 /* Three DMA descriptors are linked together. Each DMA descriptor is     */
 /* responsible for port->bufchunk of a common buffer.                    */
diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c
index b6be705c2a3e..e78fe49a9849 100644
--- a/arch/cris/arch-v10/kernel/signal.c
+++ b/arch/cris/arch-v10/kernel/signal.c
@@ -537,7 +537,7 @@ void do_signal(int canrestart, struct pt_regs *regs)
 			RESTART_CRIS_SYS(regs);
 		}
 		if (regs->r10 == -ERESTART_RESTARTBLOCK) {
-			regs->r10 = __NR_restart_syscall;
+			regs->r9 = __NR_restart_syscall;
 			regs->irp -= 2;
 		}
 	}
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a2dd740c5907..1633b120aa81 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -406,7 +406,6 @@ config ETRAX_AXISFLASHMAP
 	select MTD_CHAR
 	select MTD_BLOCK
 	select MTD_PARTITIONS
-	select MTD_CONCAT
 	select MTD_COMPLEX_MAPPINGS
 	help
 	  This option enables MTD mapping of flash devices.  Needed to use
diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile
index e8c02437edaf..39aa3c117a86 100644
--- a/arch/cris/arch-v32/drivers/Makefile
+++ b/arch/cris/arch-v32/drivers/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
 obj-$(CONFIG_ETRAXFS)                   += mach-fs/
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)         += mach-a3/
 obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
-obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
 obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
 obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 obj-$(CONFIG_PCI)			+= pci/
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 51e1e85df96d..7b155f8203b8 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -215,7 +215,7 @@ static struct mtd_partition main_partition = {
 };
 #endif
 
-/* Auxilliary partition if we find another flash */
+/* Auxiliary partition if we find another flash */
 static struct mtd_partition aux_partition = {
 	.name = "aux",
 	.size = 0,
@@ -275,7 +275,6 @@ static struct mtd_info *flash_probe(void)
 	}
 
 	if (count > 1) {
-#ifdef CONFIG_MTD_CONCAT
 		/* Since the concatenation layer adds a small overhead we
 		 * could try to figure out if the chips in cse0 and cse1 are
 		 * identical and reprobe the whole cse0+cse1 window. But since
@@ -284,11 +283,6 @@ static struct mtd_info *flash_probe(void)
 		 * complicating the probing procedure.
 		 */
 		mtd_total = mtd_concat_create(mtds, count, "cse0+cse1");
-#else
-		printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
-		       "(mis)configuration!\n", map_cse0.name, map_cse1.name);
-		mtd_toal = NULL;
-#endif
 		if (!mtd_total) {
 			printk(KERN_ERR "%s and %s: Concatenation failed!\n",
 				map_cse0.name, map_cse1.name);
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index 25d6f2b3a721..f58f2c1c5295 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -165,7 +165,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	/* Enable the following for a flash based bad block table */
 	/* this->options = NAND_USE_FLASH_BBT; */
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
 		err = -ENXIO;
 		goto out_mtd;
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index c5a0f54763cc..d5b0cc9f976b 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -156,7 +156,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	/* Enable the following for a flash based bad block table */
 	/* this->options = NAND_USE_FLASH_BBT; */
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan(crisv32_mtd, 1)) {
 		err = -ENXIO;
 		goto out_ior;
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
deleted file mode 100644
index b6e4fc0aad42..000000000000
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * PCF8563 RTC
- *
- * From Phillips' datasheet:
- *
- * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interrupt output and voltage
- * low detector are also provided. All address and data are transferred
- * serially via two-line bidirectional I2C-bus. Maximum bus speed is
- * 400 kbits/s. The built-in word address register is incremented
- * automatically after each written or read byte.
- *
- * Copyright (c) 2002-2007, Axis Communications AB
- * All rights reserved.
- *
- * Author: Tobias Anderberg <tobiasa@axis.com>.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/bcd.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-#include "i2c.h"
-
-#define PCF8563_MAJOR	121	/* Local major number. */
-#define DEVICE_NAME	"rtc"	/* Name which is registered in /proc/devices. */
-#define PCF8563_NAME	"PCF8563"
-#define DRIVER_VERSION	"$Revision: 1.17 $"
-
-/* Two simple wrapper macros, saves a few keystrokes. */
-#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
-#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
-
-static DEFINE_MUTEX(pcf8563_mutex);
-static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
-
-static const unsigned char days_in_month[] =
-	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
-
-/* Cache VL bit value read at driver init since writing the RTC_SECOND
- * register clears the VL status.
- */
-static int voltage_low;
-
-static const struct file_operations pcf8563_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl = pcf8563_unlocked_ioctl,
-	.llseek		= noop_llseek,
-};
-
-unsigned char
-pcf8563_readreg(int reg)
-{
-	unsigned char res = rtc_read(reg);
-
-	/* The PCF8563 does not return 0 for unimplemented bits. */
-	switch (reg) {
-		case RTC_SECONDS:
-		case RTC_MINUTES:
-			res &= 0x7F;
-			break;
-		case RTC_HOURS:
-		case RTC_DAY_OF_MONTH:
-			res &= 0x3F;
-			break;
-		case RTC_WEEKDAY:
-			res &= 0x07;
-			break;
-		case RTC_MONTH:
-			res &= 0x1F;
-			break;
-		case RTC_CONTROL1:
-			res &= 0xA8;
-			break;
-		case RTC_CONTROL2:
-			res &= 0x1F;
-			break;
-		case RTC_CLOCKOUT_FREQ:
-		case RTC_TIMER_CONTROL:
-			res &= 0x83;
-			break;
-	}
-	return res;
-}
-
-void
-pcf8563_writereg(int reg, unsigned char val)
-{
-	rtc_write(reg, val);
-}
-
-void
-get_rtc_time(struct rtc_time *tm)
-{
-	tm->tm_sec  = rtc_read(RTC_SECONDS);
-	tm->tm_min  = rtc_read(RTC_MINUTES);
-	tm->tm_hour = rtc_read(RTC_HOURS);
-	tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
-	tm->tm_wday = rtc_read(RTC_WEEKDAY);
-	tm->tm_mon  = rtc_read(RTC_MONTH);
-	tm->tm_year = rtc_read(RTC_YEAR);
-
-	if (tm->tm_sec & 0x80) {
-		printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time "
-		       "information is no longer guaranteed!\n", PCF8563_NAME);
-	}
-
-	tm->tm_year  = bcd2bin(tm->tm_year) +
-		       ((tm->tm_mon & 0x80) ? 100 : 0);
-	tm->tm_sec  &= 0x7F;
-	tm->tm_min  &= 0x7F;
-	tm->tm_hour &= 0x3F;
-	tm->tm_mday &= 0x3F;
-	tm->tm_wday &= 0x07; /* Not coded in BCD. */
-	tm->tm_mon  &= 0x1F;
-
-	tm->tm_sec = bcd2bin(tm->tm_sec);
-	tm->tm_min = bcd2bin(tm->tm_min);
-	tm->tm_hour = bcd2bin(tm->tm_hour);
-	tm->tm_mday = bcd2bin(tm->tm_mday);
-	tm->tm_mon = bcd2bin(tm->tm_mon);
-	tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
-}
-
-int __init
-pcf8563_init(void)
-{
-	static int res;
-	static int first = 1;
-
-	if (!first)
-		return res;
-	first = 0;
-
-	/* Initiate the i2c protocol. */
-	res = i2c_init();
-	if (res < 0) {
-		printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
-		return res;
-	}
-
-	/*
-	 * First of all we need to reset the chip. This is done by
-	 * clearing control1, control2 and clk freq and resetting
-	 * all alarms.
-	 */
-	if (rtc_write(RTC_CONTROL1, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_CONTROL2, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
-		goto err;
-
-	if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
-		goto err;
-
-	/* Reset the alarms. */
-	if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
-		goto err;
-
-	if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
-		goto err;
-
-	/* Check for low voltage, and warn about it. */
-	if (rtc_read(RTC_SECONDS) & 0x80) {
-		voltage_low = 1;
-		printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-		       "date/time information is no longer guaranteed!\n",
-		       PCF8563_NAME);
-	}
-
-	return res;
-
-err:
-	printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-	res = -1;
-	return res;
-}
-
-void __exit
-pcf8563_exit(void)
-{
-	unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
-}
-
-/*
- * ioctl calls for this driver. Why return -ENOTTY upon error? Because
- * POSIX says so!
- */
-static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	/* Some sanity checks. */
-	if (_IOC_TYPE(cmd) != RTC_MAGIC)
-		return -ENOTTY;
-
-	if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
-		return -ENOTTY;
-
-	switch (cmd) {
-	case RTC_RD_TIME:
-	{
-		struct rtc_time tm;
-
-		mutex_lock(&rtc_lock);
-		memset(&tm, 0, sizeof tm);
-		get_rtc_time(&tm);
-
-		if (copy_to_user((struct rtc_time *) arg, &tm,
-				 sizeof tm)) {
-			mutex_unlock(&rtc_lock);
-			return -EFAULT;
-		}
-
-		mutex_unlock(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_SET_TIME:
-	{
-		int leap;
-		int year;
-		int century;
-		struct rtc_time tm;
-
-		memset(&tm, 0, sizeof tm);
-		if (!capable(CAP_SYS_TIME))
-			return -EPERM;
-
-		if (copy_from_user(&tm, (struct rtc_time *) arg,
-				   sizeof tm))
-			return -EFAULT;
-
-		/* Convert from struct tm to struct rtc_time. */
-		tm.tm_year += 1900;
-		tm.tm_mon += 1;
-
-		/*
-		 * Check if tm.tm_year is a leap year. A year is a leap
-		 * year if it is divisible by 4 but not 100, except
-		 * that years divisible by 400 _are_ leap years.
-		 */
-		year = tm.tm_year;
-		leap = (tm.tm_mon == 2) &&
-			((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-
-		/* Perform some sanity checks. */
-		if ((tm.tm_year < 1970) ||
-		    (tm.tm_mon > 12) ||
-		    (tm.tm_mday == 0) ||
-		    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-		    (tm.tm_wday >= 7) ||
-		    (tm.tm_hour >= 24) ||
-		    (tm.tm_min >= 60) ||
-		    (tm.tm_sec >= 60))
-			return -EINVAL;
-
-		century = (tm.tm_year >= 2000) ? 0x80 : 0;
-		tm.tm_year = tm.tm_year % 100;
-
-		tm.tm_year = bin2bcd(tm.tm_year);
-		tm.tm_mon = bin2bcd(tm.tm_mon);
-		tm.tm_mday = bin2bcd(tm.tm_mday);
-		tm.tm_hour = bin2bcd(tm.tm_hour);
-		tm.tm_min = bin2bcd(tm.tm_min);
-		tm.tm_sec = bin2bcd(tm.tm_sec);
-		tm.tm_mon |= century;
-
-		mutex_lock(&rtc_lock);
-
-		rtc_write(RTC_YEAR, tm.tm_year);
-		rtc_write(RTC_MONTH, tm.tm_mon);
-		rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
-		rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-		rtc_write(RTC_HOURS, tm.tm_hour);
-		rtc_write(RTC_MINUTES, tm.tm_min);
-		rtc_write(RTC_SECONDS, tm.tm_sec);
-
-		mutex_unlock(&rtc_lock);
-
-		return 0;
-	}
-	case RTC_VL_READ:
-		if (voltage_low)
-			printk(KERN_ERR "%s: RTC Voltage Low - "
-			       "reliable date/time information is no "
-			       "longer guaranteed!\n", PCF8563_NAME);
-
-		if (copy_to_user((int *) arg, &voltage_low, sizeof(int)))
-			return -EFAULT;
-		return 0;
-
-	case RTC_VL_CLR:
-	{
-		/* Clear the VL bit in the seconds register in case
-		 * the time has not been set already (which would
-		 * have cleared it). This does not really matter
-		 * because of the cached voltage_low value but do it
-		 * anyway for consistency. */
-
-		int ret = rtc_read(RTC_SECONDS);
-
-		rtc_write(RTC_SECONDS, (ret & 0x7F));
-
-		/* Clear the cached value. */
-		voltage_low = 0;
-
-		return 0;
-	}
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	mutex_lock(&pcf8563_mutex);
-	return pcf8563_ioctl(filp, cmd, arg);
-	mutex_unlock(&pcf8563_mutex);
-
-	return ret;
-}
-
-static int __init pcf8563_register(void)
-{
-	if (pcf8563_init() < 0) {
-		printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
-		       "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-		return -1;
-	}
-
-	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-		printk(KERN_INFO "%s: Unable to get major numer %d for RTC "
-		       "device.\n", PCF8563_NAME, PCF8563_MAJOR);
-		return -1;
-	}
-
-	printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
-	       DRIVER_VERSION);
-
-	/* Check for low voltage, and warn about it. */
-	if (voltage_low) {
-		printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-		       "information is no longer guaranteed!\n", PCF8563_NAME);
-	}
-
-	return 0;
-}
-
-module_init(pcf8563_register);
-module_exit(pcf8563_exit);
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index c8637a9195ea..a6a180bc566f 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -33,7 +33,7 @@
 #include <asm/sync_serial.h>
 
 
-/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
+/* The receiver is a bit tricky because of the continuous stream of data.*/
 /*                                                                       */
 /* Three DMA descriptors are linked together. Each DMA descriptor is     */
 /* responsible for port->bufchunk of a common buffer.                    */
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 0ecb50b8f0d9..3abf12c23e5f 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -182,7 +182,7 @@ _syscall_traced:
 	move.d	$r0, [$sp]
 
 	;; The registers carrying parameters (R10-R13) are intact. The optional
-	;; fifth and sixth parameters is in MOF and SRP respectivly. Put them
+	;; fifth and sixth parameters is in MOF and SRP respectively. Put them
 	;; back on the stack.
 	subq	4, $sp
 	move	$srp, [$sp]
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 8023176e19b2..68a1a5901ca5 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -374,7 +374,7 @@ crisv32_do_multiple(struct pt_regs* regs)
 	irq_enter();
 
 	for (i = 0; i < NBR_REGS; i++) {
-		/* Get which IRQs that happend. */
+		/* Get which IRQs that happened. */
 		masked[i] = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
 			r_masked_vect, i);
 
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 6b653323d796..c0343c3ea7f8 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -925,7 +925,7 @@ stub_is_stopped(int sigval)
 
 					if (reg.eda >= bp_d_regs[bp * 2] &&
 					    reg.eda <= bp_d_regs[bp * 2 + 1]) {
-						/* EDA withing range for this BP; it must be the one
+						/* EDA within range for this BP; it must be the one
 						   we're looking for. */
 						stopped_data_address = reg.eda;
 						break;
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index 562f84718906..0570e8ce603d 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -149,7 +149,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
         childregs->r10 = 0;	/* Child returns 0 after a fork/clone. */
 
 	/* Set a new TLS ?
-	 * The TLS is in $mof beacuse it is the 5th argument to sys_clone.
+	 * The TLS is in $mof because it is the 5th argument to sys_clone.
 	 */
 	if (p->mm && (clone_flags & CLONE_SETTLS)) {
 		task_thread_info(p)->tls = regs->mof;
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index b3a05ae56214..ce4ab1a5552c 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -610,7 +610,7 @@ ugdb_trap_user(struct thread_info *ti, int sig)
 		user_regs(ti)->spc = 0;
 	}
 	/* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
-	   not withing any configured h/w breakpoint range). Synchronize with
+	   not within any configured h/w breakpoint range). Synchronize with
 	   what already exists for kernel debugging.  */
 	if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
 		/* Break 8: subtract 2 from ERP unless in a delay slot. */
diff --git a/arch/cris/arch-v32/mach-a3/arbiter.c b/arch/cris/arch-v32/mach-a3/arbiter.c
index 8b924db71c9a..15f5c9de2639 100644
--- a/arch/cris/arch-v32/mach-a3/arbiter.c
+++ b/arch/cris/arch-v32/mach-a3/arbiter.c
@@ -568,7 +568,7 @@ crisv32_foo_arbiter_irq(int irq, void *dev_id)
 	REG_WR(marb_foo_bp, watch->instance, rw_ack, ack);
 	REG_WR(marb_foo, regi_marb_foo, rw_ack_intr, ack_intr);
 
-	printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs());
+	printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs());
 
 	if (watch->cb)
 		watch->cb();
@@ -624,7 +624,7 @@ crisv32_bar_arbiter_irq(int irq, void *dev_id)
 	REG_WR(marb_bar_bp, watch->instance, rw_ack, ack);
 	REG_WR(marb_bar, regi_marb_bar, rw_ack_intr, ack_intr);
 
-	printk(KERN_DEBUG "IRQ occured at %X\n", (unsigned)get_irq_regs()->erp);
+	printk(KERN_DEBUG "IRQ occurred at %X\n", (unsigned)get_irq_regs()->erp);
 
 	if (watch->cb)
 		watch->cb();
diff --git a/arch/cris/arch-v32/mach-fs/arbiter.c b/arch/cris/arch-v32/mach-fs/arbiter.c
index 82ef293c4c81..3f8ebb5c1477 100644
--- a/arch/cris/arch-v32/mach-fs/arbiter.c
+++ b/arch/cris/arch-v32/mach-fs/arbiter.c
@@ -395,7 +395,7 @@ static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id)
 	REG_WR(marb_bp, watch->instance, rw_ack, ack);
 	REG_WR(marb, regi_marb, rw_ack_intr, ack_intr);
 
-	printk(KERN_INFO "IRQ occured at %lX\n", get_irq_regs()->erp);
+	printk(KERN_INFO "IRQ occurred at %lX\n", get_irq_regs()->erp);
 
 	if (watch->cb)
 		watch->cb();
diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S
index 2fafe247a25b..af55df0994b3 100644
--- a/arch/cris/boot/rescue/head_v10.S
+++ b/arch/cris/boot/rescue/head_v10.S
@@ -7,7 +7,7 @@
  * for each partition that this code should check.
  *
  * If any of the checksums fail, we assume the flash is so
- * corrupt that we cant use it to boot into the ftp flash
+ * corrupt that we can't use it to boot into the ftp flash
  * loader, and instead we initialize the serial port to
  * receive a flash-loader and new flash image. we dont include
  * any flash code here, but just accept a certain amount of
diff --git a/arch/cris/include/arch-v32/arch/hwregs/Makefile b/arch/cris/include/arch-v32/arch/hwregs/Makefile
index f9a05d2aa061..b8b3f8d666e4 100644
--- a/arch/cris/include/arch-v32/arch/hwregs/Makefile
+++ b/arch/cris/include/arch-v32/arch/hwregs/Makefile
@@ -1,6 +1,6 @@
 # Makefile to generate or copy the latest register definitions
 # and related datastructures and helpermacros.
-# The offical place for these files is at:
+# The official place for these files is at:
 RELEASE ?= r1_alfa5
 OFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/
 
diff --git a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile
index a90056a095e3..0747a22e3c07 100644
--- a/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile
+++ b/arch/cris/include/arch-v32/arch/hwregs/iop/Makefile
@@ -1,7 +1,7 @@
 # $Id: Makefile,v 1.3 2004/01/07 20:34:55 johana Exp $
 # Makefile to generate or copy the latest register definitions
 # and related datastructures and helpermacros.
-# The offical place for these files is probably at:
+# The official place for these files is probably at:
 RELEASE ?= r1_alfa5
 IOPOFFICIAL_INCDIR = /n/asic/projects/guinness/releases/$(RELEASE)/design/top/sw/include/
 
diff --git a/arch/cris/include/asm/bitops.h b/arch/cris/include/asm/bitops.h
index 9e69cfb7f134..310e0de67aa6 100644
--- a/arch/cris/include/asm/bitops.h
+++ b/arch/cris/include/asm/bitops.h
@@ -154,12 +154,11 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 #include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/lock.h>
 
-#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/le.h>
 
 #define ext2_set_bit_atomic(l,n,a)   test_and_set_bit(n,a)
 #define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
 
-#include <asm-generic/bitops/minix.h>
 #include <asm-generic/bitops/sched.h>
 
 #endif /* __KERNEL__ */
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 9eaae217b21b..7df430138355 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -97,7 +97,7 @@ extern unsigned long empty_zero_page;
 #define pte_clear(mm,addr,xp)	do { pte_val(*(xp)) = 0; } while (0)
 
 #define pmd_none(x)     (!pmd_val(x))
-/* by removing the _PAGE_KERNEL bit from the comparision, the same pmd_bad
+/* by removing the _PAGE_KERNEL bit from the comparison, the same pmd_bad
  * works for both _PAGE_TABLE and _KERNPG_TABLE pmd entries.
  */
 #define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_KERNEL)) != _PAGE_TABLE)
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index 91776069ca80..29b74a105830 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -68,7 +68,7 @@ struct thread_info {
 #define init_thread_info	(init_thread_union.thread_info)
 
 /* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
+#define alloc_thread_info(tsk, node) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
 #define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/cris/include/asm/types.h b/arch/cris/include/asm/types.h
index 5790262cbe8a..551a12c0aa01 100644
--- a/arch/cris/include/asm/types.h
+++ b/arch/cris/include/asm/types.h
@@ -16,15 +16,6 @@ typedef unsigned short umode_t;
 
 #define BITS_PER_LONG 32
 
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide, just like our other addresses.  */
- 
-typedef u32 dma_addr_t;
-typedef u32 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
 #endif /* __KERNEL__ */
 
 #endif
diff --git a/arch/cris/kernel/traps.c b/arch/cris/kernel/traps.c
index 541efbf09371..8da53f34c7a7 100644
--- a/arch/cris/kernel/traps.c
+++ b/arch/cris/kernel/traps.c
@@ -183,7 +183,7 @@ __initcall(oops_nmi_register);
 
 /*
  * This gets called from entry.S when the watchdog has bitten. Show something
- * similiar to an Oops dump, and if the kernel is configured to be a nice
+ * similar to an Oops dump, and if the kernel is configured to be a nice
  * doggy, then halt instead of reboot.
  */
 void