Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 692 insertions, 0 deletions

diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
new file mode 100644
index 000000000000..5318f0cbfc26
--- /dev/null
+++ b/arch/ia64/kernel/smpboot.c
@@ -0,0 +1,692 @@
+/*
+ * SMP boot-related support
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 01/05/16 Rohit Seth <rohit.seth@intel.com>	Moved SMP booting functions from smp.c to here.
+ * 01/04/27 David Mosberger <davidm@hpl.hp.com>	Added ITC synching code.
+ * 02/07/31 David Mosberger <davidm@hpl.hp.com>	Switch over to hotplug-CPU boot-sequence.
+ *						smp_boot_cpus()/smp_commence() is replaced by
+ *						smp_prepare_cpus()/__cpu_up()/smp_cpus_done().
+ */
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+#include <linux/percpu.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/cache.h>
+#include <asm/current.h>
+#include <asm/delay.h>
+#include <asm/ia32.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/mca.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/sal.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/unistd.h>
+
+#define SMP_DEBUG 0
+
+#if SMP_DEBUG
+#define Dprintk(x...)  printk(x)
+#else
+#define Dprintk(x...)
+#endif
+
+
+/*
+ * ITC synchronization related stuff:
+ */
+#define MASTER	0
+#define SLAVE	(SMP_CACHE_BYTES/8)
+
+#define NUM_ROUNDS	64	/* magic value */
+#define NUM_ITERS	5	/* likewise */
+
+static DEFINE_SPINLOCK(itc_sync_lock);
+static volatile unsigned long go[SLAVE + 1];
+
+#define DEBUG_ITC_SYNC	0
+
+extern void __devinit calibrate_delay (void);
+extern void start_ap (void);
+extern unsigned long ia64_iobase;
+
+task_t *task_for_booting_cpu;
+
+/*
+ * State for each CPU
+ */
+DEFINE_PER_CPU(int, cpu_state);
+
+/* Bitmasks of currently online, and possible CPUs */
+cpumask_t cpu_online_map;
+EXPORT_SYMBOL(cpu_online_map);
+cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
+
+/* which logical CPU number maps to which CPU (physical APIC ID) */
+volatile int ia64_cpu_to_sapicid[NR_CPUS];
+EXPORT_SYMBOL(ia64_cpu_to_sapicid);
+
+static volatile cpumask_t cpu_callin_map;
+
+struct smp_boot_data smp_boot_data __initdata;
+
+unsigned long ap_wakeup_vector = -1; /* External Int use to wakeup APs */
+
+char __initdata no_int_routing;
+
+unsigned char smp_int_redirect; /* are INT and IPI redirectable by the chipset? */
+
+static int __init
+nointroute (char *str)
+{
+	no_int_routing = 1;
+	printk ("no_int_routing on\n");
+	return 1;
+}
+
+__setup("nointroute", nointroute);
+
+void
+sync_master (void *arg)
+{
+	unsigned long flags, i;
+
+	go[MASTER] = 0;
+
+	local_irq_save(flags);
+	{
+		for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) {
+			while (!go[MASTER]);
+			go[MASTER] = 0;
+			go[SLAVE] = ia64_get_itc();
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Return the number of cycles by which our itc differs from the itc on the master
+ * (time-keeper) CPU.  A positive number indicates our itc is ahead of the master,
+ * negative that it is behind.
+ */
+static inline long
+get_delta (long *rt, long *master)
+{
+	unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0;
+	unsigned long tcenter, t0, t1, tm;
+	long i;
+
+	for (i = 0; i < NUM_ITERS; ++i) {
+		t0 = ia64_get_itc();
+		go[MASTER] = 1;
+		while (!(tm = go[SLAVE]));
+		go[SLAVE] = 0;
+		t1 = ia64_get_itc();
+
+		if (t1 - t0 < best_t1 - best_t0)
+			best_t0 = t0, best_t1 = t1, best_tm = tm;
+	}
+
+	*rt = best_t1 - best_t0;
+	*master = best_tm - best_t0;
+
+	/* average best_t0 and best_t1 without overflow: */
+	tcenter = (best_t0/2 + best_t1/2);
+	if (best_t0 % 2 + best_t1 % 2 == 2)
+		++tcenter;
+	return tcenter - best_tm;
+}
+
+/*
+ * Synchronize ar.itc of the current (slave) CPU with the ar.itc of the MASTER CPU
+ * (normally the time-keeper CPU).  We use a closed loop to eliminate the possibility of
+ * unaccounted-for errors (such as getting a machine check in the middle of a calibration
+ * step).  The basic idea is for the slave to ask the master what itc value it has and to
+ * read its own itc before and after the master responds.  Each iteration gives us three
+ * timestamps:
+ *
+ *	slave		master
+ *
+ *	t0 ---\
+ *             ---\
+ *		   --->
+ *			tm
+ *		   /---
+ *	       /---
+ *	t1 <---
+ *
+ *
+ * The goal is to adjust the slave's ar.itc such that tm falls exactly half-way between t0
+ * and t1.  If we achieve this, the clocks are synchronized provided the interconnect
+ * between the slave and the master is symmetric.  Even if the interconnect were
+ * asymmetric, we would still know that the synchronization error is smaller than the
+ * roundtrip latency (t0 - t1).
+ *
+ * When the interconnect is quiet and symmetric, this lets us synchronize the itc to
+ * within one or two cycles.  However, we can only *guarantee* that the synchronization is
+ * accurate to within a round-trip time, which is typically in the range of several
+ * hundred cycles (e.g., ~500 cycles).  In practice, this means that the itc's are usually
+ * almost perfectly synchronized, but we shouldn't assume that the accuracy is much better
+ * than half a micro second or so.
+ */
+void
+ia64_sync_itc (unsigned int master)
+{
+	long i, delta, adj, adjust_latency = 0, done = 0;
+	unsigned long flags, rt, master_time_stamp, bound;
+#if DEBUG_ITC_SYNC
+	struct {
+		long rt;	/* roundtrip time */
+		long master;	/* master's timestamp */
+		long diff;	/* difference between midpoint and master's timestamp */
+		long lat;	/* estimate of itc adjustment latency */
+	} t[NUM_ROUNDS];
+#endif
+
+	/*
+	 * Make sure local timer ticks are disabled while we sync.  If
+	 * they were enabled, we'd have to worry about nasty issues
+	 * like setting the ITC ahead of (or a long time before) the
+	 * next scheduled tick.
+	 */
+	BUG_ON((ia64_get_itv() & (1 << 16)) == 0);
+
+	go[MASTER] = 1;
+
+	if (smp_call_function_single(master, sync_master, NULL, 1, 0) < 0) {
+		printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master);
+		return;
+	}
+
+	while (go[MASTER]);	/* wait for master to be ready */
+
+	spin_lock_irqsave(&itc_sync_lock, flags);
+	{
+		for (i = 0; i < NUM_ROUNDS; ++i) {
+			delta = get_delta(&rt, &master_time_stamp);
+			if (delta == 0) {
+				done = 1;	/* let's lock on to this... */
+				bound = rt;
+			}
+
+			if (!done) {
+				if (i > 0) {
+					adjust_latency += -delta;
+					adj = -delta + adjust_latency/4;
+				} else
+					adj = -delta;
+
+				ia64_set_itc(ia64_get_itc() + adj);
+			}
+#if DEBUG_ITC_SYNC
+			t[i].rt = rt;
+			t[i].master = master_time_stamp;
+			t[i].diff = delta;
+			t[i].lat = adjust_latency/4;
+#endif
+		}
+	}
+	spin_unlock_irqrestore(&itc_sync_lock, flags);
+
+#if DEBUG_ITC_SYNC
+	for (i = 0; i < NUM_ROUNDS; ++i)
+		printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
+		       t[i].rt, t[i].master, t[i].diff, t[i].lat);
+#endif
+
+	printk(KERN_INFO "CPU %d: synchronized ITC with CPU %u (last diff %ld cycles, "
+	       "maxerr %lu cycles)\n", smp_processor_id(), master, delta, rt);
+}
+
+/*
+ * Ideally sets up per-cpu profiling hooks.  Doesn't do much now...
+ */
+static inline void __devinit
+smp_setup_percpu_timer (void)
+{
+}
+
+static void __devinit
+smp_callin (void)
+{
+	int cpuid, phys_id;
+	extern void ia64_init_itm(void);
+
+#ifdef CONFIG_PERFMON
+	extern void pfm_init_percpu(void);
+#endif
+
+	cpuid = smp_processor_id();
+	phys_id = hard_smp_processor_id();
+
+	if (cpu_online(cpuid)) {
+		printk(KERN_ERR "huh, phys CPU#0x%x, CPU#0x%x already present??\n",
+		       phys_id, cpuid);
+		BUG();
+	}
+
+	lock_ipi_calllock();
+	cpu_set(cpuid, cpu_online_map);
+	unlock_ipi_calllock();
+
+	smp_setup_percpu_timer();
+
+	ia64_mca_cmc_vector_setup();	/* Setup vector on AP */
+
+#ifdef CONFIG_PERFMON
+	pfm_init_percpu();
+#endif
+
+	local_irq_enable();
+
+	if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
+		/*
+		 * Synchronize the ITC with the BP.  Need to do this after irqs are
+		 * enabled because ia64_sync_itc() calls smp_call_function_single(), which
+		 * calls spin_unlock_bh(), which calls spin_unlock_bh(), which calls
+		 * local_bh_enable(), which bugs out if irqs are not enabled...
+		 */
+		Dprintk("Going to syncup ITC with BP.\n");
+		ia64_sync_itc(0);
+	}
+
+	/*
+	 * Get our bogomips.
+	 */
+	ia64_init_itm();
+	calibrate_delay();
+	local_cpu_data->loops_per_jiffy = loops_per_jiffy;
+
+#ifdef CONFIG_IA32_SUPPORT
+	ia32_gdt_init();
+#endif
+
+	/*
+	 * Allow the master to continue.
+	 */
+	cpu_set(cpuid, cpu_callin_map);
+	Dprintk("Stack on CPU %d at about %p\n",cpuid, &cpuid);
+}
+
+
+/*
+ * Activate a secondary processor.  head.S calls this.
+ */
+int __devinit
+start_secondary (void *unused)
+{
+	/* Early console may use I/O ports */
+	ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+
+	Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+	efi_map_pal_code();
+	cpu_init();
+	smp_callin();
+
+	cpu_idle();
+	return 0;
+}
+
+struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
+{
+	return NULL;
+}
+
+struct create_idle {
+	struct task_struct *idle;
+	struct completion done;
+	int cpu;
+};
+
+void
+do_fork_idle(void *_c_idle)
+{
+	struct create_idle *c_idle = _c_idle;
+
+	c_idle->idle = fork_idle(c_idle->cpu);
+	complete(&c_idle->done);
+}
+
+static int __devinit
+do_boot_cpu (int sapicid, int cpu)
+{
+	int timeout;
+	struct create_idle c_idle = {
+		.cpu	= cpu,
+		.done	= COMPLETION_INITIALIZER(c_idle.done),
+	};
+	DECLARE_WORK(work, do_fork_idle, &c_idle);
+	/*
+	 * We can't use kernel_thread since we must avoid to reschedule the child.
+	 */
+	if (!keventd_up() || current_is_keventd())
+		work.func(work.data);
+	else {
+		schedule_work(&work);
+		wait_for_completion(&c_idle.done);
+	}
+
+	if (IS_ERR(c_idle.idle))
+		panic("failed fork for CPU %d", cpu);
+	task_for_booting_cpu = c_idle.idle;
+
+	Dprintk("Sending wakeup vector %lu to AP 0x%x/0x%x.\n", ap_wakeup_vector, cpu, sapicid);
+
+	platform_send_ipi(cpu, ap_wakeup_vector, IA64_IPI_DM_INT, 0);
+
+	/*
+	 * Wait 10s total for the AP to start
+	 */
+	Dprintk("Waiting on callin_map ...");
+	for (timeout = 0; timeout < 100000; timeout++) {
+		if (cpu_isset(cpu, cpu_callin_map))
+			break;  /* It has booted */
+		udelay(100);
+	}
+	Dprintk("\n");
+
+	if (!cpu_isset(cpu, cpu_callin_map)) {
+		printk(KERN_ERR "Processor 0x%x/0x%x is stuck.\n", cpu, sapicid);
+		ia64_cpu_to_sapicid[cpu] = -1;
+		cpu_clear(cpu, cpu_online_map);  /* was set in smp_callin() */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int __init
+decay (char *str)
+{
+	int ticks;
+	get_option (&str, &ticks);
+	return 1;
+}
+
+__setup("decay=", decay);
+
+/*
+ * Initialize the logical CPU number to SAPICID mapping
+ */
+void __init
+smp_build_cpu_map (void)
+{
+	int sapicid, cpu, i;
+	int boot_cpu_id = hard_smp_processor_id();
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		ia64_cpu_to_sapicid[cpu] = -1;
+#ifdef CONFIG_HOTPLUG_CPU
+		cpu_set(cpu, cpu_possible_map);
+#endif
+	}
+
+	ia64_cpu_to_sapicid[0] = boot_cpu_id;
+	cpus_clear(cpu_present_map);
+	cpu_set(0, cpu_present_map);
+	cpu_set(0, cpu_possible_map);
+	for (cpu = 1, i = 0; i < smp_boot_data.cpu_count; i++) {
+		sapicid = smp_boot_data.cpu_phys_id[i];
+		if (sapicid == boot_cpu_id)
+			continue;
+		cpu_set(cpu, cpu_present_map);
+		cpu_set(cpu, cpu_possible_map);
+		ia64_cpu_to_sapicid[cpu] = sapicid;
+		cpu++;
+	}
+}
+
+#ifdef CONFIG_NUMA
+
+/* on which node is each logical CPU (one cacheline even for 64 CPUs) */
+u8 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_to_node_map);
+/* which logical CPUs are on which nodes */
+cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+
+/*
+ * Build cpu to node mapping and initialize the per node cpu masks.
+ */
+void __init
+build_cpu_to_node_map (void)
+{
+	int cpu, i, node;
+
+	for(node=0; node<MAX_NUMNODES; node++)
+		cpus_clear(node_to_cpu_mask[node]);
+	for(cpu = 0; cpu < NR_CPUS; ++cpu) {
+		/*
+		 * All Itanium NUMA platforms I know use ACPI, so maybe we
+		 * can drop this ifdef completely.                    [EF]
+		 */
+#ifdef CONFIG_ACPI_NUMA
+		node = -1;
+		for (i = 0; i < NR_CPUS; ++i)
+			if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) {
+				node = node_cpuid[i].nid;
+				break;
+			}
+#else
+#		error Fixme: Dunno how to build CPU-to-node map.
+#endif
+		cpu_to_node_map[cpu] = (node >= 0) ? node : 0;
+		if (node >= 0)
+			cpu_set(cpu, node_to_cpu_mask[node]);
+	}
+}
+
+#endif /* CONFIG_NUMA */
+
+/*
+ * Cycle through the APs sending Wakeup IPIs to boot each.
+ */
+void __init
+smp_prepare_cpus (unsigned int max_cpus)
+{
+	int boot_cpu_id = hard_smp_processor_id();
+
+	/*
+	 * Initialize the per-CPU profiling counter/multiplier
+	 */
+
+	smp_setup_percpu_timer();
+
+	/*
+	 * We have the boot CPU online for sure.
+	 */
+	cpu_set(0, cpu_online_map);
+	cpu_set(0, cpu_callin_map);
+
+	local_cpu_data->loops_per_jiffy = loops_per_jiffy;
+	ia64_cpu_to_sapicid[0] = boot_cpu_id;
+
+	printk(KERN_INFO "Boot processor id 0x%x/0x%x\n", 0, boot_cpu_id);
+
+	current_thread_info()->cpu = 0;
+
+	/*
+	 * If SMP should be disabled, then really disable it!
+	 */
+	if (!max_cpus) {
+		printk(KERN_INFO "SMP mode deactivated.\n");
+		cpus_clear(cpu_online_map);
+		cpus_clear(cpu_present_map);
+		cpus_clear(cpu_possible_map);
+		cpu_set(0, cpu_online_map);
+		cpu_set(0, cpu_present_map);
+		cpu_set(0, cpu_possible_map);
+		return;
+	}
+}
+
+void __devinit smp_prepare_boot_cpu(void)
+{
+	cpu_set(smp_processor_id(), cpu_online_map);
+	cpu_set(smp_processor_id(), cpu_callin_map);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void fixup_irqs(void);
+/* must be called with cpucontrol mutex held */
+static int __devinit cpu_enable(unsigned int cpu)
+{
+	per_cpu(cpu_state,cpu) = CPU_UP_PREPARE;
+	wmb();
+
+	while (!cpu_online(cpu))
+		cpu_relax();
+	return 0;
+}
+
+int __cpu_disable(void)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * dont permit boot processor for now
+	 */
+	if (cpu == 0)
+		return -EBUSY;
+
+	fixup_irqs();
+	local_flush_tlb_all();
+	printk ("Disabled cpu %u\n", smp_processor_id());
+	return 0;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+	unsigned int i;
+
+	for (i = 0; i < 100; i++) {
+		/* They ack this in play_dead by setting CPU_DEAD */
+		if (per_cpu(cpu_state, cpu) == CPU_DEAD)
+		{
+			/*
+			 * TBD: Enable this when physical removal
+			 * or when we put the processor is put in
+			 * SAL_BOOT_RENDEZ mode
+			 * cpu_clear(cpu, cpu_callin_map);
+			 */
+			return;
+		}
+		msleep(100);
+	}
+ 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+}
+#else /* !CONFIG_HOTPLUG_CPU */
+static int __devinit cpu_enable(unsigned int cpu)
+{
+	return 0;
+}
+
+int __cpu_disable(void)
+{
+	return -ENOSYS;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+	/* We said "no" in __cpu_disable */
+	BUG();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+void
+smp_cpus_done (unsigned int dummy)
+{
+	int cpu;
+	unsigned long bogosum = 0;
+
+	/*
+	 * Allow the user to impress friends.
+	 */
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++)
+		if (cpu_online(cpu))
+			bogosum += cpu_data(cpu)->loops_per_jiffy;
+
+	printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+	       (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
+}
+
+int __devinit
+__cpu_up (unsigned int cpu)
+{
+	int ret;
+	int sapicid;
+
+	sapicid = ia64_cpu_to_sapicid[cpu];
+	if (sapicid == -1)
+		return -EINVAL;
+
+	/*
+	 * Already booted.. just enable and get outa idle lool
+	 */
+	if (cpu_isset(cpu, cpu_callin_map))
+	{
+		cpu_enable(cpu);
+		local_irq_enable();
+		while (!cpu_isset(cpu, cpu_online_map))
+			mb();
+		return 0;
+	}
+	/* Processor goes to start_secondary(), sets online flag */
+	ret = do_boot_cpu(sapicid, cpu);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Assume that CPU's have been discovered by some platform-dependent interface.  For
+ * SoftSDV/Lion, that would be ACPI.
+ *
+ * Setup of the IPI irq handler is done in irq.c:init_IRQ_SMP().
+ */
+void __init
+init_smp_config(void)
+{
+	struct fptr {
+		unsigned long fp;
+		unsigned long gp;
+	} *ap_startup;
+	long sal_ret;
+
+	/* Tell SAL where to drop the AP's.  */
+	ap_startup = (struct fptr *) start_ap;
+	sal_ret = ia64_sal_set_vectors(SAL_VECTOR_OS_BOOT_RENDEZ,
+				       ia64_tpa(ap_startup->fp), ia64_tpa(ap_startup->gp), 0, 0, 0, 0);
+	if (sal_ret < 0)
+		printk(KERN_ERR "SMP: Can't set SAL AP Boot Rendezvous: %s\n",
+		       ia64_sal_strerror(sal_ret));
+}
+