Merge branch 'irqchip-consolidation' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable

Conflicts:
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-omap4panda.c
	arch/arm/mach-omap2/include/mach/omap4-common.h
	arch/arm/plat-omap/include/plat/irqs.h

The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h
and the other trivial conflicts resolved.  The now empty ifdef in irqs.h
was also eliminated.

1 files changed, 64 insertions, 104 deletions

diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index c5b5212cc3f9..47b5f90002ab 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -1,43 +1,15 @@
 /*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- *           this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- *           be careful that dev_id for this sources is unique since this the
- *           only possibility to distinguish between different handlers for
- *           free_irq. irq lists also have different irq flags:
- *           - IRQ_FLG_FAST: handler is inserted at top of list (after other
- *                           fast handlers)
- *           - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- *                           they're executed irq level is set to the previous
- *                           one, but handlers don't need to be reentrant, if
- *                           reentrance occurred, slow handlers will be just
- *                           called again.
- *           The whole interrupt handling for CIAs is moved to cia.c
- *           /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- *           interrupts, normal and fast handlers, fast handlers being
- *           marked with IRQF_DISABLED and runs with all other interrupts
- *           disabled. Normal interrupts disable their own source but
- *           run with all other interrupt sources enabled.
- *           PORTS and EXTER interrupts are always shared even if the
- *           drivers do not explicitly mark this when calling
- *           request_irq which they really should do.
- *           This is similar to the way interrupts are handled on all
- *           other architectures and makes a ton of sense besides
- *           having the advantage of making it easier to share
- *           drivers.
- *           /Jes
  */
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/irq.h>
 
 #include <asm/irq.h>
 #include <asm/traps.h>
@@ -45,56 +17,6 @@
 #include <asm/amigaints.h>
 #include <asm/amipcmcia.h>
 
-static void amiga_enable_irq(unsigned int irq);
-static void amiga_disable_irq(unsigned int irq);
-static irqreturn_t ami_int1(int irq, void *dev_id);
-static irqreturn_t ami_int3(int irq, void *dev_id);
-static irqreturn_t ami_int4(int irq, void *dev_id);
-static irqreturn_t ami_int5(int irq, void *dev_id);
-
-static struct irq_controller amiga_irq_controller = {
-	.name		= "amiga",
-	.lock		= __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
-	.enable		= amiga_enable_irq,
-	.disable	= amiga_disable_irq,
-};
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-void __init amiga_init_IRQ(void)
-{
-	if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
-		pr_err("Couldn't register int%d\n", 1);
-	if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
-		pr_err("Couldn't register int%d\n", 3);
-	if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
-		pr_err("Couldn't register int%d\n", 4);
-	if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
-		pr_err("Couldn't register int%d\n", 5);
-
-	m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
-
-	/* turn off PCMCIA interrupts */
-	if (AMIGAHW_PRESENT(PCMCIA))
-		gayle.inten = GAYLE_IRQ_IDE;
-
-	/* turn off all interrupts and enable the master interrupt bit */
-	amiga_custom.intena = 0x7fff;
-	amiga_custom.intreq = 0x7fff;
-	amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
-	cia_init_IRQ(&ciaa_base);
-	cia_init_IRQ(&ciab_base);
-}
 
 /*
  * Enable/disable a particular machine specific interrupt source.
@@ -103,112 +25,150 @@ void __init amiga_init_IRQ(void)
  * internal data, that may not be changed by the interrupt at the same time.
  */
 
-static void amiga_enable_irq(unsigned int irq)
+static void amiga_irq_enable(struct irq_data *data)
 {
-	amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
+	amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
 }
 
-static void amiga_disable_irq(unsigned int irq)
+static void amiga_irq_disable(struct irq_data *data)
 {
-	amiga_custom.intena = 1 << (irq - IRQ_USER);
+	amiga_custom.intena = 1 << (data->irq - IRQ_USER);
 }
 
+static struct irq_chip amiga_irq_chip = {
+	.name		= "amiga",
+	.irq_enable	= amiga_irq_enable,
+	.irq_disable	= amiga_irq_disable,
+};
+
+
 /*
  * The builtin Amiga hardware interrupt handlers.
  */
 
-static irqreturn_t ami_int1(int irq, void *dev_id)
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial transmit buffer empty, interrupt */
 	if (ints & IF_TBE) {
 		amiga_custom.intreq = IF_TBE;
-		m68k_handle_int(IRQ_AMIGA_TBE);
+		generic_handle_irq(IRQ_AMIGA_TBE);
 	}
 
 	/* if floppy disk transfer complete, interrupt */
 	if (ints & IF_DSKBLK) {
 		amiga_custom.intreq = IF_DSKBLK;
-		m68k_handle_int(IRQ_AMIGA_DSKBLK);
+		generic_handle_irq(IRQ_AMIGA_DSKBLK);
 	}
 
 	/* if software interrupt set, interrupt */
 	if (ints & IF_SOFT) {
 		amiga_custom.intreq = IF_SOFT;
-		m68k_handle_int(IRQ_AMIGA_SOFT);
+		generic_handle_irq(IRQ_AMIGA_SOFT);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int3(int irq, void *dev_id)
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if a blitter interrupt */
 	if (ints & IF_BLIT) {
 		amiga_custom.intreq = IF_BLIT;
-		m68k_handle_int(IRQ_AMIGA_BLIT);
+		generic_handle_irq(IRQ_AMIGA_BLIT);
 	}
 
 	/* if a copper interrupt */
 	if (ints & IF_COPER) {
 		amiga_custom.intreq = IF_COPER;
-		m68k_handle_int(IRQ_AMIGA_COPPER);
+		generic_handle_irq(IRQ_AMIGA_COPPER);
 	}
 
 	/* if a vertical blank interrupt */
 	if (ints & IF_VERTB) {
 		amiga_custom.intreq = IF_VERTB;
-		m68k_handle_int(IRQ_AMIGA_VERTB);
+		generic_handle_irq(IRQ_AMIGA_VERTB);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int4(int irq, void *dev_id)
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if audio 0 interrupt */
 	if (ints & IF_AUD0) {
 		amiga_custom.intreq = IF_AUD0;
-		m68k_handle_int(IRQ_AMIGA_AUD0);
+		generic_handle_irq(IRQ_AMIGA_AUD0);
 	}
 
 	/* if audio 1 interrupt */
 	if (ints & IF_AUD1) {
 		amiga_custom.intreq = IF_AUD1;
-		m68k_handle_int(IRQ_AMIGA_AUD1);
+		generic_handle_irq(IRQ_AMIGA_AUD1);
 	}
 
 	/* if audio 2 interrupt */
 	if (ints & IF_AUD2) {
 		amiga_custom.intreq = IF_AUD2;
-		m68k_handle_int(IRQ_AMIGA_AUD2);
+		generic_handle_irq(IRQ_AMIGA_AUD2);
 	}
 
 	/* if audio 3 interrupt */
 	if (ints & IF_AUD3) {
 		amiga_custom.intreq = IF_AUD3;
-		m68k_handle_int(IRQ_AMIGA_AUD3);
+		generic_handle_irq(IRQ_AMIGA_AUD3);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int5(int irq, void *dev_id)
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial receive buffer full interrupt */
 	if (ints & IF_RBF) {
 		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		m68k_handle_int(IRQ_AMIGA_RBF);
+		generic_handle_irq(IRQ_AMIGA_RBF);
 	}
 
 	/* if a disk sync interrupt */
 	if (ints & IF_DSKSYN) {
 		amiga_custom.intreq = IF_DSKSYN;
-		m68k_handle_int(IRQ_AMIGA_DSKSYN);
+		generic_handle_irq(IRQ_AMIGA_DSKSYN);
 	}
-	return IRQ_HANDLED;
+}
+
+
+/*
+ * void amiga_init_IRQ(void)
+ *
+ * Parameters:	None
+ *
+ * Returns:	Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the amiga IRQ handling routines.
+ */
+
+void __init amiga_init_IRQ(void)
+{
+	m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+				  AMI_STD_IRQS);
+
+	irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+	irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+	irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+	irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
+
+	/* turn off PCMCIA interrupts */
+	if (AMIGAHW_PRESENT(PCMCIA))
+		gayle.inten = GAYLE_IRQ_IDE;
+
+	/* turn off all interrupts and enable the master interrupt bit */
+	amiga_custom.intena = 0x7fff;
+	amiga_custom.intreq = 0x7fff;
+	amiga_custom.intena = IF_SETCLR | IF_INTEN;
+
+	cia_init_IRQ(&ciaa_base);
+	cia_init_IRQ(&ciab_base);
 }