Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 422 insertions, 0 deletions

diff --git a/arch/m68k/fpsp040/srem_mod.S b/arch/m68k/fpsp040/srem_mod.S
new file mode 100644
index 000000000000..8c8d7f50cc68
--- /dev/null
+++ b/arch/m68k/fpsp040/srem_mod.S
@@ -0,0 +1,422 @@
+|
+|	srem_mod.sa 3.1 12/10/90
+|
+|      The entry point sMOD computes the floating point MOD of the
+|      input values X and Y. The entry point sREM computes the floating
+|      point (IEEE) REM of the input values X and Y.
+|
+|      INPUT
+|      -----
+|      Double-extended value Y is pointed to by address in register
+|      A0. Double-extended value X is located in -12(A0). The values
+|      of X and Y are both nonzero and finite; although either or both
+|      of them can be denormalized. The special cases of zeros, NaNs,
+|      and infinities are handled elsewhere.
+|
+|      OUTPUT
+|      ------
+|      FREM(X,Y) or FMOD(X,Y), depending on entry point.
+|
+|       ALGORITHM
+|       ---------
+|
+|       Step 1.  Save and strip signs of X and Y: signX := sign(X),
+|                signY := sign(Y), X := |X|, Y := |Y|,
+|                signQ := signX EOR signY. Record whether MOD or REM
+|                is requested.
+|
+|       Step 2.  Set L := expo(X)-expo(Y), k := 0, Q := 0.
+|                If (L < 0) then
+|                   R := X, go to Step 4.
+|                else
+|                   R := 2^(-L)X, j := L.
+|                endif
+|
+|       Step 3.  Perform MOD(X,Y)
+|            3.1 If R = Y, go to Step 9.
+|            3.2 If R > Y, then { R := R - Y, Q := Q + 1}
+|            3.3 If j = 0, go to Step 4.
+|            3.4 k := k + 1, j := j - 1, Q := 2Q, R := 2R. Go to
+|                Step 3.1.
+|
+|       Step 4.  At this point, R = X - QY = MOD(X,Y). Set
+|                Last_Subtract := false (used in Step 7 below). If
+|                MOD is requested, go to Step 6.
+|
+|       Step 5.  R = MOD(X,Y), but REM(X,Y) is requested.
+|            5.1 If R < Y/2, then R = MOD(X,Y) = REM(X,Y). Go to
+|                Step 6.
+|            5.2 If R > Y/2, then { set Last_Subtract := true,
+|                Q := Q + 1, Y := signY*Y }. Go to Step 6.
+|            5.3 This is the tricky case of R = Y/2. If Q is odd,
+|                then { Q := Q + 1, signX := -signX }.
+|
+|       Step 6.  R := signX*R.
+|
+|       Step 7.  If Last_Subtract = true, R := R - Y.
+|
+|       Step 8.  Return signQ, last 7 bits of Q, and R as required.
+|
+|       Step 9.  At this point, R = 2^(-j)*X - Q Y = Y. Thus,
+|                X = 2^(j)*(Q+1)Y. set Q := 2^(j)*(Q+1),
+|                R := 0. Return signQ, last 7 bits of Q, and R.
+|
+|
+
+|		Copyright (C) Motorola, Inc. 1990
+|			All Rights Reserved
+|
+|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|	The copyright notice above does not evidence any
+|	actual or intended publication of such source code.
+
+SREM_MOD:    |idnt    2,1 | Motorola 040 Floating Point Software Package
+
+	|section    8
+
+#include "fpsp.h"
+
+	.set	Mod_Flag,L_SCR3
+	.set	SignY,FP_SCR3+4
+	.set	SignX,FP_SCR3+8
+	.set	SignQ,FP_SCR3+12
+	.set	Sc_Flag,FP_SCR4
+
+	.set	Y,FP_SCR1
+	.set	Y_Hi,Y+4
+	.set	Y_Lo,Y+8
+
+	.set	R,FP_SCR2
+	.set	R_Hi,R+4
+	.set	R_Lo,R+8
+
+
+Scale:     .long	0x00010000,0x80000000,0x00000000,0x00000000
+
+	|xref	t_avoid_unsupp
+
+        .global        smod
+smod:
+
+   movel               #0,Mod_Flag(%a6)
+   bras                Mod_Rem
+
+        .global        srem
+srem:
+
+   movel               #1,Mod_Flag(%a6)
+
+Mod_Rem:
+|..Save sign of X and Y
+   moveml              %d2-%d7,-(%a7)     | ...save data registers
+   movew               (%a0),%d3
+   movew               %d3,SignY(%a6)
+   andil               #0x00007FFF,%d3   | ...Y := |Y|
+
+|
+   movel               4(%a0),%d4
+   movel               8(%a0),%d5        | ...(D3,D4,D5) is |Y|
+
+   tstl                %d3
+   bnes                Y_Normal
+
+   movel               #0x00003FFE,%d3	| ...$3FFD + 1
+   tstl                %d4
+   bnes                HiY_not0
+
+HiY_0:
+   movel               %d5,%d4
+   clrl                %d5
+   subil               #32,%d3
+   clrl                %d6
+   bfffo                %d4{#0:#32},%d6
+   lsll                %d6,%d4
+   subl                %d6,%d3           | ...(D3,D4,D5) is normalized
+|                                       ...with bias $7FFD
+   bras                Chk_X
+
+HiY_not0:
+   clrl                %d6
+   bfffo                %d4{#0:#32},%d6
+   subl                %d6,%d3
+   lsll                %d6,%d4
+   movel               %d5,%d7           | ...a copy of D5
+   lsll                %d6,%d5
+   negl                %d6
+   addil               #32,%d6
+   lsrl                %d6,%d7
+   orl                 %d7,%d4           | ...(D3,D4,D5) normalized
+|                                       ...with bias $7FFD
+   bras                Chk_X
+
+Y_Normal:
+   addil               #0x00003FFE,%d3   | ...(D3,D4,D5) normalized
+|                                       ...with bias $7FFD
+
+Chk_X:
+   movew               -12(%a0),%d0
+   movew               %d0,SignX(%a6)
+   movew               SignY(%a6),%d1
+   eorl                %d0,%d1
+   andil               #0x00008000,%d1
+   movew               %d1,SignQ(%a6)	| ...sign(Q) obtained
+   andil               #0x00007FFF,%d0
+   movel               -8(%a0),%d1
+   movel               -4(%a0),%d2       | ...(D0,D1,D2) is |X|
+   tstl                %d0
+   bnes                X_Normal
+   movel               #0x00003FFE,%d0
+   tstl                %d1
+   bnes                HiX_not0
+
+HiX_0:
+   movel               %d2,%d1
+   clrl                %d2
+   subil               #32,%d0
+   clrl                %d6
+   bfffo                %d1{#0:#32},%d6
+   lsll                %d6,%d1
+   subl                %d6,%d0           | ...(D0,D1,D2) is normalized
+|                                       ...with bias $7FFD
+   bras                Init
+
+HiX_not0:
+   clrl                %d6
+   bfffo                %d1{#0:#32},%d6
+   subl                %d6,%d0
+   lsll                %d6,%d1
+   movel               %d2,%d7           | ...a copy of D2
+   lsll                %d6,%d2
+   negl                %d6
+   addil               #32,%d6
+   lsrl                %d6,%d7
+   orl                 %d7,%d1           | ...(D0,D1,D2) normalized
+|                                       ...with bias $7FFD
+   bras                Init
+
+X_Normal:
+   addil               #0x00003FFE,%d0   | ...(D0,D1,D2) normalized
+|                                       ...with bias $7FFD
+
+Init:
+|
+   movel               %d3,L_SCR1(%a6)   | ...save biased expo(Y)
+   movel		%d0,L_SCR2(%a6)	|save d0
+   subl                %d3,%d0           | ...L := expo(X)-expo(Y)
+|   Move.L               D0,L            ...D0 is j
+   clrl                %d6              | ...D6 := carry <- 0
+   clrl                %d3              | ...D3 is Q
+   moveal              #0,%a1           | ...A1 is k; j+k=L, Q=0
+
+|..(Carry,D1,D2) is R
+   tstl                %d0
+   bges                Mod_Loop
+
+|..expo(X) < expo(Y). Thus X = mod(X,Y)
+|
+   movel		L_SCR2(%a6),%d0	|restore d0
+   bra                Get_Mod
+
+|..At this point  R = 2^(-L)X; Q = 0; k = 0; and  k+j = L
+
+
+Mod_Loop:
+   tstl                %d6              | ...test carry bit
+   bgts                R_GT_Y
+
+|..At this point carry = 0, R = (D1,D2), Y = (D4,D5)
+   cmpl                %d4,%d1           | ...compare hi(R) and hi(Y)
+   bnes                R_NE_Y
+   cmpl                %d5,%d2           | ...compare lo(R) and lo(Y)
+   bnes                R_NE_Y
+
+|..At this point, R = Y
+   bra                Rem_is_0
+
+R_NE_Y:
+|..use the borrow of the previous compare
+   bcss                R_LT_Y          | ...borrow is set iff R < Y
+
+R_GT_Y:
+|..If Carry is set, then Y < (Carry,D1,D2) < 2Y. Otherwise, Carry = 0
+|..and Y < (D1,D2) < 2Y. Either way, perform R - Y
+   subl                %d5,%d2           | ...lo(R) - lo(Y)
+   subxl               %d4,%d1           | ...hi(R) - hi(Y)
+   clrl                %d6              | ...clear carry
+   addql               #1,%d3           | ...Q := Q + 1
+
+R_LT_Y:
+|..At this point, Carry=0, R < Y. R = 2^(k-L)X - QY; k+j = L; j >= 0.
+   tstl                %d0              | ...see if j = 0.
+   beqs                PostLoop
+
+   addl                %d3,%d3           | ...Q := 2Q
+   addl                %d2,%d2           | ...lo(R) = 2lo(R)
+   roxll               #1,%d1           | ...hi(R) = 2hi(R) + carry
+   scs                  %d6              | ...set Carry if 2(R) overflows
+   addql               #1,%a1           | ...k := k+1
+   subql               #1,%d0           | ...j := j - 1
+|..At this point, R=(Carry,D1,D2) = 2^(k-L)X - QY, j+k=L, j >= 0, R < 2Y.
+
+   bras                Mod_Loop
+
+PostLoop:
+|..k = L, j = 0, Carry = 0, R = (D1,D2) = X - QY, R < Y.
+
+|..normalize R.
+   movel               L_SCR1(%a6),%d0           | ...new biased expo of R
+   tstl                %d1
+   bnes                HiR_not0
+
+HiR_0:
+   movel               %d2,%d1
+   clrl                %d2
+   subil               #32,%d0
+   clrl                %d6
+   bfffo                %d1{#0:#32},%d6
+   lsll                %d6,%d1
+   subl                %d6,%d0           | ...(D0,D1,D2) is normalized
+|                                       ...with bias $7FFD
+   bras                Get_Mod
+
+HiR_not0:
+   clrl                %d6
+   bfffo                %d1{#0:#32},%d6
+   bmis                Get_Mod         | ...already normalized
+   subl                %d6,%d0
+   lsll                %d6,%d1
+   movel               %d2,%d7           | ...a copy of D2
+   lsll                %d6,%d2
+   negl                %d6
+   addil               #32,%d6
+   lsrl                %d6,%d7
+   orl                 %d7,%d1           | ...(D0,D1,D2) normalized
+
+|
+Get_Mod:
+   cmpil		#0x000041FE,%d0
+   bges		No_Scale
+Do_Scale:
+   movew		%d0,R(%a6)
+   clrw		R+2(%a6)
+   movel		%d1,R_Hi(%a6)
+   movel		%d2,R_Lo(%a6)
+   movel		L_SCR1(%a6),%d6
+   movew		%d6,Y(%a6)
+   clrw		Y+2(%a6)
+   movel		%d4,Y_Hi(%a6)
+   movel		%d5,Y_Lo(%a6)
+   fmovex		R(%a6),%fp0		| ...no exception
+   movel		#1,Sc_Flag(%a6)
+   bras		ModOrRem
+No_Scale:
+   movel		%d1,R_Hi(%a6)
+   movel		%d2,R_Lo(%a6)
+   subil		#0x3FFE,%d0
+   movew		%d0,R(%a6)
+   clrw		R+2(%a6)
+   movel		L_SCR1(%a6),%d6
+   subil		#0x3FFE,%d6
+   movel		%d6,L_SCR1(%a6)
+   fmovex		R(%a6),%fp0
+   movew		%d6,Y(%a6)
+   movel		%d4,Y_Hi(%a6)
+   movel		%d5,Y_Lo(%a6)
+   movel		#0,Sc_Flag(%a6)
+
+|
+
+
+ModOrRem:
+   movel               Mod_Flag(%a6),%d6
+   beqs                Fix_Sign
+
+   movel               L_SCR1(%a6),%d6           | ...new biased expo(Y)
+   subql               #1,%d6           | ...biased expo(Y/2)
+   cmpl                %d6,%d0
+   blts                Fix_Sign
+   bgts                Last_Sub
+
+   cmpl                %d4,%d1
+   bnes                Not_EQ
+   cmpl                %d5,%d2
+   bnes                Not_EQ
+   bra                Tie_Case
+
+Not_EQ:
+   bcss                Fix_Sign
+
+Last_Sub:
+|
+   fsubx		Y(%a6),%fp0		| ...no exceptions
+   addql               #1,%d3           | ...Q := Q + 1
+
+|
+
+Fix_Sign:
+|..Get sign of X
+   movew               SignX(%a6),%d6
+   bges		Get_Q
+   fnegx		%fp0
+
+|..Get Q
+|
+Get_Q:
+   clrl		%d6
+   movew               SignQ(%a6),%d6        | ...D6 is sign(Q)
+   movel               #8,%d7
+   lsrl                %d7,%d6
+   andil               #0x0000007F,%d3   | ...7 bits of Q
+   orl                 %d6,%d3           | ...sign and bits of Q
+   swap                 %d3
+   fmovel              %fpsr,%d6
+   andil               #0xFF00FFFF,%d6
+   orl                 %d3,%d6
+   fmovel              %d6,%fpsr         | ...put Q in fpsr
+
+|
+Restore:
+   moveml              (%a7)+,%d2-%d7
+   fmovel              USER_FPCR(%a6),%fpcr
+   movel               Sc_Flag(%a6),%d0
+   beqs                Finish
+   fmulx		Scale(%pc),%fp0	| ...may cause underflow
+   bra			t_avoid_unsupp	|check for denorm as a
+|					;result of the scaling
+
+Finish:
+	fmovex		%fp0,%fp0		|capture exceptions & round
+	rts
+
+Rem_is_0:
+|..R = 2^(-j)X - Q Y = Y, thus R = 0 and quotient = 2^j (Q+1)
+   addql               #1,%d3
+   cmpil               #8,%d0           | ...D0 is j
+   bges                Q_Big
+
+   lsll                %d0,%d3
+   bras                Set_R_0
+
+Q_Big:
+   clrl                %d3
+
+Set_R_0:
+   fmoves		#0x00000000,%fp0
+   movel		#0,Sc_Flag(%a6)
+   bra                Fix_Sign
+
+Tie_Case:
+|..Check parity of Q
+   movel               %d3,%d6
+   andil               #0x00000001,%d6
+   tstl                %d6
+   beq                Fix_Sign	| ...Q is even
+
+|..Q is odd, Q := Q + 1, signX := -signX
+   addql               #1,%d3
+   movew               SignX(%a6),%d6
+   eoril               #0x00008000,%d6
+   movew               %d6,SignX(%a6)
+   bra                Fix_Sign
+
+   |end