Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 175 insertions, 0 deletions

diff --git a/arch/m68k/hp300/ints.c b/arch/m68k/hp300/ints.c
new file mode 100644
index 000000000000..0c5bb403e893
--- /dev/null
+++ b/arch/m68k/hp300/ints.c
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/m68k/hp300/ints.c
+ *
+ *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
+ *
+ *  This file contains the HP300-specific interrupt handling.
+ *  We only use the autovector interrupts, and therefore we need to
+ *  maintain lists of devices sharing each ipl.
+ *  [ipl list code added by Peter Maydell <pmaydell@chiark.greenend.org.uk> 06/1998]
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/ptrace.h>
+#include <asm/errno.h>
+#include "ints.h"
+
+/* Each ipl has a linked list of interrupt service routines.
+ * Service routines are added via hp300_request_irq() and removed
+ * via hp300_free_irq(). The device driver should set IRQ_FLG_FAST
+ * if it needs to be serviced early (eg FIFOless UARTs); this will
+ * cause it to be added at the front of the queue rather than
+ * the back.
+ * Currently IRQ_FLG_SLOW and flags=0 are treated identically; if
+ * we needed three levels of priority we could distinguish them
+ * but this strikes me as mildly ugly...
+ */
+
+/* we start with no entries in any list */
+static irq_node_t *hp300_irq_list[HP300_NUM_IRQS];
+
+static spinlock_t irqlist_lock;
+
+/* This handler receives all interrupts, dispatching them to the registered handlers */
+static irqreturn_t hp300_int_handler(int irq, void *dev_id, struct pt_regs *fp)
+{
+        irq_node_t *t;
+        /* We just give every handler on the chain an opportunity to handle
+         * the interrupt, in priority order.
+         */
+        for(t = hp300_irq_list[irq]; t; t=t->next)
+                t->handler(irq, t->dev_id, fp);
+        /* We could put in some accounting routines, checks for stray interrupts,
+         * etc, in here. Note that currently we can't tell whether or not
+         * a handler handles the interrupt, though.
+         */
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t hp300_badint(int irq, void *dev_id, struct pt_regs *fp)
+{
+	num_spurious += 1;
+	return IRQ_NONE;
+}
+
+irqreturn_t (*hp300_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = {
+	[0] = hp300_badint,
+	[1] = hp300_int_handler,
+	[2] = hp300_int_handler,
+	[3] = hp300_int_handler,
+	[4] = hp300_int_handler,
+	[5] = hp300_int_handler,
+	[6] = hp300_int_handler,
+	[7] = hp300_int_handler
+};
+
+/* dev_id had better be unique to each handler because it's the only way we have
+ * to distinguish handlers when removing them...
+ *
+ * It would be pretty easy to support IRQ_FLG_LOCK (handler is not replacable)
+ * and IRQ_FLG_REPLACE (handler replaces existing one with this dev_id)
+ * if we wanted to. IRQ_FLG_FAST is needed for devices where interrupt latency
+ * matters (eg the dreaded FIFOless UART...)
+ */
+int hp300_request_irq(unsigned int irq,
+                      irqreturn_t (*handler) (int, void *, struct pt_regs *),
+                      unsigned long flags, const char *devname, void *dev_id)
+{
+        irq_node_t *t, *n = new_irq_node();
+
+        if (!n)                                   /* oops, no free nodes */
+                return -ENOMEM;
+
+	spin_lock_irqsave(&irqlist_lock, flags);
+
+        if (!hp300_irq_list[irq]) {
+                /* no list yet */
+                hp300_irq_list[irq] = n;
+                n->next = NULL;
+        } else if (flags & IRQ_FLG_FAST) {
+                /* insert at head of list */
+                n->next = hp300_irq_list[irq];
+                hp300_irq_list[irq] = n;
+        } else {
+                /* insert at end of list */
+                for(t = hp300_irq_list[irq]; t->next; t = t->next)
+                        /* do nothing */;
+                n->next = NULL;
+                t->next = n;
+        }
+
+        /* Fill in n appropriately */
+        n->handler = handler;
+        n->flags = flags;
+        n->dev_id = dev_id;
+        n->devname = devname;
+	spin_unlock_irqrestore(&irqlist_lock, flags);
+	return 0;
+}
+
+void hp300_free_irq(unsigned int irq, void *dev_id)
+{
+        irq_node_t *t;
+        unsigned long flags;
+
+        spin_lock_irqsave(&irqlist_lock, flags);
+
+        t = hp300_irq_list[irq];
+        if (!t)                                   /* no handlers at all for that IRQ */
+        {
+                printk(KERN_ERR "hp300_free_irq: attempt to remove nonexistent handler for IRQ %d\n", irq);
+                spin_unlock_irqrestore(&irqlist_lock, flags);
+		return;
+        }
+
+        if (t->dev_id == dev_id)
+        {                                         /* removing first handler on chain */
+                t->flags = IRQ_FLG_STD;           /* we probably don't really need these */
+                t->dev_id = NULL;
+                t->devname = NULL;
+                t->handler = NULL;                /* frees this irq_node_t */
+                hp300_irq_list[irq] = t->next;
+		spin_unlock_irqrestore(&irqlist_lock, flags);
+		return;
+        }
+
+        /* OK, must be removing from middle of the chain */
+
+        for (t = hp300_irq_list[irq]; t->next && t->next->dev_id != dev_id; t = t->next)
+                /* do nothing */;
+        if (!t->next)
+        {
+                printk(KERN_ERR "hp300_free_irq: attempt to remove nonexistent handler for IRQ %d\n", irq);
+		spin_unlock_irqrestore(&irqlist_lock, flags);
+		return;
+        }
+        /* remove the entry after t: */
+        t->next->flags = IRQ_FLG_STD;
+        t->next->dev_id = NULL;
+	t->next->devname = NULL;
+	t->next->handler = NULL;
+        t->next = t->next->next;
+
+	spin_unlock_irqrestore(&irqlist_lock, flags);
+}
+
+int show_hp300_interrupts(struct seq_file *p, void *v)
+{
+	return 0;
+}
+
+void __init hp300_init_IRQ(void)
+{
+	spin_lock_init(&irqlist_lock);
+}