Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu arch update from Greg Ungerer:
 "Quite a varied set of changes this time.
   - A little more merge cleanup, this time the assembler entry code.
   - New sub-architecture support for the ColdFire 5251/5253 and 5441x
     CPU families.
   - Specific clk support code for the ColdFire 520x and 532x CPU
     familes.
   - Refactoring of the ColdFire GPIO support.
   - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx
     family).  This showed up a few problems with ColdFire cache,
     allocating coherent memory and bi-directional DMA support.  Fixes
     for those too."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits)
  m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs
  m68k: add PCI bus code support for the ColdFire M54xx SoC family
  m68k: add IO access definitions to support PCI on ColdFire platforms
  m68k: add PCI bus support definitions for the ColdFire M54xx SoC family
  m68k: common PCI support definitions and code
  m68k: add support for DMA_BIDIRECTIONAL in dma support functions
  m68k: fix ColdFire clear cache operation
  m68k: use simpler dma_alloc_coherent() for ColdFire CPUs
  m68knommu: platform support for 8390 based ethernet used on some boards
  m68knommu: Add clk definitions for m532x.
  m68knommu: Add clk definitions for m520x.
  m68knommu: Add rtc device for m5441x.
  m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller.
  m68knommu: Add support for the Coldfire m5441x.
  m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1
  coldfire-qspi: Add support for the Coldfire 5251/5253.
  m68knommu: Add support for the Coldfire 5251/5253
  m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips.
  m68k: merge the MMU and non-MMU versions of the entry.S code
  m68k: use jbsr to call functions instead of bsrl
  ...

6 files changed, 562 insertions, 554 deletions

diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 5c7070e21eb7..068ad49210d6 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -18,6 +18,7 @@ obj-y	+= setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o
 
 obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o
 obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
+obj-$(CONFIG_PCI) += pcibios.o
 
 ifndef CONFIG_MMU_SUN3
 obj-y	+= dma.o
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index f6daf6e15d2e..e546a5534dd4 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -16,7 +16,7 @@
 
 #include <asm/pgalloc.h>
 
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			 dma_addr_t *handle, gfp_t flag)
@@ -96,7 +96,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
-#endif /* CONFIG_MMU */
+#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
 
 EXPORT_SYMBOL(dma_alloc_coherent);
 EXPORT_SYMBOL(dma_free_coherent);
@@ -105,6 +105,7 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
 				size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
+	case DMA_BIDIRECTIONAL:
 	case DMA_TO_DEVICE:
 		cache_push(handle, size);
 		break;
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index b8daf64e347d..165ee9f9d5c9 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -1,5 +1,451 @@
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#include "entry_mm.S"
+/* -*- mode: asm -*-
+ *
+ *  linux/arch/m68k/kernel/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ *
+ */
+
+/*
+ * entry.S  contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ */
+
+/*
+ * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
+ *               all pointers that used to be 'current' are now entry
+ *               number 0 in the 'current_set' list.
+ *
+ *  6/05/00 RZ:	 addedd writeback completion after return from sighandler
+ *		 for 68040
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/traps.h>
+#include <asm/unistd.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+.globl system_call, buserr, trap, resume
+.globl sys_call_table
+.globl sys_fork, sys_clone, sys_vfork
+.globl ret_from_interrupt, bad_interrupt
+.globl auto_irqhandler_fixup
+.globl user_irqvec_fixup
+
+.text
+ENTRY(sys_fork)
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jbsr	m68k_fork
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_clone)
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jbsr	m68k_clone
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_vfork)
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	jbsr	m68k_vfork
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_sigreturn)
+	SAVE_SWITCH_STACK
+	jbsr	do_sigreturn
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(sys_rt_sigreturn)
+	SAVE_SWITCH_STACK
+	jbsr	do_rt_sigreturn
+	RESTORE_SWITCH_STACK
+	rts
+
+ENTRY(buserr)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%sp,%sp@-		| stack frame pointer argument
+	jbsr	buserr_c
+	addql	#4,%sp
+	jra	ret_from_exception
+
+ENTRY(trap)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%sp,%sp@-		| stack frame pointer argument
+	jbsr	trap_c
+	addql	#4,%sp
+	jra	ret_from_exception
+
+	| After a fork we jump here directly from resume,
+	| so that %d1 contains the previous task
+	| schedule_tail now used regardless of CONFIG_SMP
+ENTRY(ret_from_fork)
+	movel	%d1,%sp@-
+	jsr	schedule_tail
+	addql	#4,%sp
+	jra	ret_from_exception
+
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
+
+#ifdef TRAP_DBG_INTERRUPT
+
+.globl dbginterrupt
+ENTRY(dbginterrupt)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%sp,%sp@- 		/* stack frame pointer argument */
+	jsr	dbginterrupt_c
+	addql	#4,%sp
+	jra	ret_from_exception
+#endif
+
+ENTRY(reschedule)
+	/* save top of frame */
+	pea	%sp@
+	jbsr	set_esp0
+	addql	#4,%sp
+	pea	ret_from_exception
+	jmp	schedule
+
+ENTRY(ret_from_user_signal)
+	moveq #__NR_sigreturn,%d0
+	trap #0
+
+ENTRY(ret_from_user_rt_signal)
+	movel #__NR_rt_sigreturn,%d0
+	trap #0
+
 #else
-#include "entry_no.S"
+
+do_trace_entry:
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
+	subql	#4,%sp
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	movel	%sp@(PT_OFF_ORIG_D0),%d0
+	cmpl	#NR_syscalls,%d0
+	jcs	syscall
+badsys:
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)
+	jra	ret_from_syscall
+
+do_trace_exit:
+	subql	#4,%sp
+	SAVE_SWITCH_STACK
+	jbsr	syscall_trace
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jra	.Lret_from_exception
+
+ENTRY(ret_from_signal)
+	movel	%curptr@(TASK_STACK),%a1
+	tstb	%a1@(TINFO_FLAGS+2)
+	jge	1f
+	jbsr	syscall_trace
+1:	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+/* on 68040 complete pending writebacks if any */
+#ifdef CONFIG_M68040
+	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
+	subql	#7,%d0				| bus error frame ?
+	jbne	1f
+	movel	%sp,%sp@-
+	jbsr	berr_040cleanup
+	addql	#4,%sp
+1:
+#endif
+	jra	.Lret_from_exception
+
+ENTRY(system_call)
+	SAVE_ALL_SYS
+
+	GET_CURRENT(%d1)
+	movel	%d1,%a1
+
+	| save top of frame
+	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+
+	| syscall trace?
+	tstb	%a1@(TINFO_FLAGS+2)
+	jmi	do_trace_entry
+	cmpl	#NR_syscalls,%d0
+	jcc	badsys
+syscall:
+	jbsr	@(sys_call_table,%d0:l:4)@(0)
+	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
+ret_from_syscall:
+	|oriw	#0x0700,%sr
+	movel	%curptr@(TASK_STACK),%a1
+	movew	%a1@(TINFO_FLAGS+2),%d0
+	jne	syscall_exit_work
+1:	RESTORE_ALL
+
+syscall_exit_work:
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
+	bnes	1b			| if so, skip resched, signals
+	lslw	#1,%d0
+	jcs	do_trace_exit
+	jmi	do_delayed_trace
+	lslw	#8,%d0
+	jne	do_signal_return
+	pea	resume_userspace
+	jra	schedule
+
+
+ENTRY(ret_from_exception)
+.Lret_from_exception:
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
+	bnes	1f			| if so, skip resched, signals
+	| only allow interrupts when we are really the last one on the
+	| kernel stack, otherwise stack overflow can occur during
+	| heavy interrupt load
+	andw	#ALLOWINT,%sr
+
+resume_userspace:
+	movel	%curptr@(TASK_STACK),%a1
+	moveb	%a1@(TINFO_FLAGS+3),%d0
+	jne	exit_work
+1:	RESTORE_ALL
+
+exit_work:
+	| save top of frame
+	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+	lslb	#1,%d0
+	jne	do_signal_return
+	pea	resume_userspace
+	jra	schedule
+
+
+do_signal_return:
+	|andw	#ALLOWINT,%sr
+	subql	#4,%sp			| dummy return address
+	SAVE_SWITCH_STACK
+	pea	%sp@(SWITCH_STACK_SIZE)
+	bsrl	do_notify_resume
+	addql	#4,%sp
+	RESTORE_SWITCH_STACK
+	addql	#4,%sp
+	jbra	resume_userspace
+
+do_delayed_trace:
+	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
+	pea	1			| send SIGTRAP
+	movel	%curptr,%sp@-
+	pea	LSIGTRAP
+	jbsr	send_sig
+	addql	#8,%sp
+	addql	#4,%sp
+	jbra	resume_userspace
+
+
+/* This is the main interrupt handler for autovector interrupts */
+
+ENTRY(auto_inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
+					|  put exception # in d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
+	subw	#VEC_SPUR,%d0
+
+	movel	%sp,%sp@-
+	movel	%d0,%sp@-		|  put vector # on stack
+auto_irqhandler_fixup = . + 2
+	jsr	do_IRQ			|  process the IRQ
+	addql	#8,%sp			|  pop parameters off stack
+
+ret_from_interrupt:
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
+	jeq	ret_from_last_interrupt
+2:	RESTORE_ALL
+
+	ALIGN
+ret_from_last_interrupt:
+	moveq	#(~ALLOWINT>>8)&0xff,%d0
+	andb	%sp@(PT_OFF_SR),%d0
+	jne	2b
+
+	/* check if we need to do software interrupts */
+	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
+	jeq	.Lret_from_exception
+	pea	ret_from_exception
+	jra	do_softirq
+
+/* Handler for user defined interrupt vectors */
+
+ENTRY(user_inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
+					|  put exception # in d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
+user_irqvec_fixup = . + 2
+	subw	#VEC_USER,%d0
+
+	movel	%sp,%sp@-
+	movel	%d0,%sp@-		|  put vector # on stack
+	jsr	do_IRQ			|  process the IRQ
+	addql	#8,%sp			|  pop parameters off stack
+
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
+	jeq	ret_from_last_interrupt
+	RESTORE_ALL
+
+/* Handler for uninitialized and spurious interrupts */
+
+ENTRY(bad_inthandler)
+	SAVE_ALL_INT
+	GET_CURRENT(%d0)
+	movel	%d0,%a1
+	addqb	#1,%a1@(TINFO_PREEMPT+1)
+
+	movel	%sp,%sp@-
+	jsr	handle_badint
+	addql	#4,%sp
+
+	movel	%curptr@(TASK_STACK),%a1
+	subqb	#1,%a1@(TINFO_PREEMPT+1)
+	jeq	ret_from_last_interrupt
+	RESTORE_ALL
+
+
+resume:
+	/*
+	 * Beware - when entering resume, prev (the current task) is
+	 * in a0, next (the new task) is in a1,so don't change these
+	 * registers until their contents are no longer needed.
+	 */
+
+	/* save sr */
+	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)
+
+	/* save fs (sfc,%dfc) (may be pointing to kernel memory) */
+	movec	%sfc,%d0
+	movew	%d0,%a0@(TASK_THREAD+THREAD_FS)
+
+	/* save usp */
+	/* it is better to use a movel here instead of a movew 8*) */
+	movec	%usp,%d0
+	movel	%d0,%a0@(TASK_THREAD+THREAD_USP)
+
+	/* save non-scratch registers on stack */
+	SAVE_SWITCH_STACK
+
+	/* save current kernel stack pointer */
+	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
+
+	/* save floating point context */
+#ifndef CONFIG_M68KFPU_EMU_ONLY
+#ifdef CONFIG_M68KFPU_EMU
+	tstl	m68k_fputype
+	jeq	3f
+#endif
+	fsave	%a0@(TASK_THREAD+THREAD_FPSTATE)
+
+#if defined(CONFIG_M68060)
+#if !defined(CPU_M68060_ONLY)
+	btst	#3,m68k_cputype+3
+	beqs	1f
+#endif
+	/* The 060 FPU keeps status in bits 15-8 of the first longword */
+	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE+2)
+	jeq	3f
+#if !defined(CPU_M68060_ONLY)
+	jra	2f
+#endif
+#endif /* CONFIG_M68060 */
+#if !defined(CPU_M68060_ONLY)
+1:	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE)
+	jeq	3f
+#endif
+2:	fmovemx	%fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
+	fmoveml	%fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
+3:
+#endif	/* CONFIG_M68KFPU_EMU_ONLY */
+	/* Return previous task in %d1 */
+	movel	%curptr,%d1
+
+	/* switch to new task (a1 contains new task) */
+	movel	%a1,%curptr
+
+	/* restore floating point context */
+#ifndef CONFIG_M68KFPU_EMU_ONLY
+#ifdef CONFIG_M68KFPU_EMU
+	tstl	m68k_fputype
+	jeq	4f
+#endif
+#if defined(CONFIG_M68060)
+#if !defined(CPU_M68060_ONLY)
+	btst	#3,m68k_cputype+3
+	beqs	1f
+#endif
+	/* The 060 FPU keeps status in bits 15-8 of the first longword */
+	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE+2)
+	jeq	3f
+#if !defined(CPU_M68060_ONLY)
+	jra	2f
+#endif
+#endif /* CONFIG_M68060 */
+#if !defined(CPU_M68060_ONLY)
+1:	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE)
+	jeq	3f
 #endif
+2:	fmovemx	%a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
+	fmoveml	%a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
+3:	frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
+4:
+#endif	/* CONFIG_M68KFPU_EMU_ONLY */
+
+	/* restore the kernel stack pointer */
+	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
+
+	/* restore non-scratch registers */
+	RESTORE_SWITCH_STACK
+
+	/* restore user stack pointer */
+	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
+	movel	%a0,%usp
+
+	/* restore fs (sfc,%dfc) */
+	movew	%a1@(TASK_THREAD+THREAD_FS),%a0
+	movec	%a0,%sfc
+	movec	%a0,%dfc
+
+	/* restore status register */
+	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
+
+	rts
+
+#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S
deleted file mode 100644
index f29e73ca9dbb..000000000000
--- a/arch/m68k/kernel/entry_mm.S
+++ /dev/null
@@ -1,419 +0,0 @@
-/* -*- mode: asm -*-
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- */
-
-/*
- * entry.S  contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- */
-
-/*
- * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
- *               all pointers that used to be 'current' are now entry
- *               number 0 in the 'current_set' list.
- *
- *  6/05/00 RZ:	 addedd writeback completion after return from sighandler
- *		 for 68040
- */
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-#include <asm/asm-offsets.h>
-
-.globl system_call, buserr, trap, resume
-.globl sys_call_table
-.globl sys_fork, sys_clone, sys_vfork
-.globl ret_from_interrupt, bad_interrupt
-.globl auto_irqhandler_fixup
-.globl user_irqvec_fixup
-
-.text
-ENTRY(buserr)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	buserr_c
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-ENTRY(trap)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@-		| stack frame pointer argument
-	bsrl	trap_c
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-	| After a fork we jump here directly from resume,
-	| so that %d1 contains the previous task
-	| schedule_tail now used regardless of CONFIG_SMP
-ENTRY(ret_from_fork)
-	movel	%d1,%sp@-
-	jsr	schedule_tail
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-do_trace_entry:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%sp@(PT_OFF_ORIG_D0),%d0
-	cmpl	#NR_syscalls,%d0
-	jcs	syscall
-badsys:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)
-	jra	ret_from_syscall
-
-do_trace_exit:
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	.Lret_from_exception
-
-ENTRY(ret_from_signal)
-	movel	%curptr@(TASK_STACK),%a1
-	tstb	%a1@(TINFO_FLAGS+2)
-	jge	1f
-	jbsr	syscall_trace
-1:	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-/* on 68040 complete pending writebacks if any */
-#ifdef CONFIG_M68040
-	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
-	subql	#7,%d0				| bus error frame ?
-	jbne	1f
-	movel	%sp,%sp@-
-	jbsr	berr_040cleanup
-	addql	#4,%sp
-1:
-#endif
-	jra	.Lret_from_exception
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-
-	GET_CURRENT(%d1)
-	movel	%d1,%a1
-
-	| save top of frame
-	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-
-	| syscall trace?
-	tstb	%a1@(TINFO_FLAGS+2)
-	jmi	do_trace_entry
-	cmpl	#NR_syscalls,%d0
-	jcc	badsys
-syscall:
-	jbsr	@(sys_call_table,%d0:l:4)@(0)
-	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
-ret_from_syscall:
-	|oriw	#0x0700,%sr
-	movel	%curptr@(TASK_STACK),%a1
-	movew	%a1@(TINFO_FLAGS+2),%d0
-	jne	syscall_exit_work
-1:	RESTORE_ALL
-
-syscall_exit_work:
-	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
-	bnes	1b			| if so, skip resched, signals
-	lslw	#1,%d0
-	jcs	do_trace_exit
-	jmi	do_delayed_trace
-	lslw	#8,%d0
-	jne	do_signal_return
-	pea	resume_userspace
-	jra	schedule
-
-
-ENTRY(ret_from_exception)
-.Lret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
-	bnes	1f			| if so, skip resched, signals
-	| only allow interrupts when we are really the last one on the
-	| kernel stack, otherwise stack overflow can occur during
-	| heavy interrupt load
-	andw	#ALLOWINT,%sr
-
-resume_userspace:
-	movel	%curptr@(TASK_STACK),%a1
-	moveb	%a1@(TINFO_FLAGS+3),%d0
-	jne	exit_work
-1:	RESTORE_ALL
-
-exit_work:
-	| save top of frame
-	movel	%sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-	lslb	#1,%d0
-	jne	do_signal_return
-	pea	resume_userspace
-	jra	schedule
-
-
-do_signal_return:
-	|andw	#ALLOWINT,%sr
-	subql	#4,%sp			| dummy return address
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	bsrl	do_notify_resume
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jbra	resume_userspace
-
-do_delayed_trace:
-	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
-	pea	1			| send SIGTRAP
-	movel	%curptr,%sp@-
-	pea	LSIGTRAP
-	jbsr	send_sig
-	addql	#8,%sp
-	addql	#4,%sp
-	jbra	resume_userspace
-
-
-/* This is the main interrupt handler for autovector interrupts */
-
-ENTRY(auto_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-					|  put exception # in d0
-	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-	subw	#VEC_SPUR,%d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@-		|  put vector # on stack
-auto_irqhandler_fixup = . + 2
-	jsr	do_IRQ			|  process the IRQ
-	addql	#8,%sp			|  pop parameters off stack
-
-ret_from_interrupt:
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-2:	RESTORE_ALL
-
-	ALIGN
-ret_from_last_interrupt:
-	moveq	#(~ALLOWINT>>8)&0xff,%d0
-	andb	%sp@(PT_OFF_SR),%d0
-	jne	2b
-
-	/* check if we need to do software interrupts */
-	tstl	irq_stat+CPUSTAT_SOFTIRQ_PENDING
-	jeq	.Lret_from_exception
-	pea	ret_from_exception
-	jra	do_softirq
-
-/* Handler for user defined interrupt vectors */
-
-ENTRY(user_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-					|  put exception # in d0
-	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-user_irqvec_fixup = . + 2
-	subw	#VEC_USER,%d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@-		|  put vector # on stack
-	jsr	do_IRQ			|  process the IRQ
-	addql	#8,%sp			|  pop parameters off stack
-
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-	RESTORE_ALL
-
-/* Handler for uninitialized and spurious interrupts */
-
-ENTRY(bad_inthandler)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%d0,%a1
-	addqb	#1,%a1@(TINFO_PREEMPT+1)
-
-	movel	%sp,%sp@-
-	jsr	handle_badint
-	addql	#4,%sp
-
-	movel	%curptr@(TASK_STACK),%a1
-	subqb	#1,%a1@(TINFO_PREEMPT+1)
-	jeq	ret_from_last_interrupt
-	RESTORE_ALL
-
-
-ENTRY(sys_fork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_fork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_clone)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_clone
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_vfork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_vfork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_rt_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_rt_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-resume:
-	/*
-	 * Beware - when entering resume, prev (the current task) is
-	 * in a0, next (the new task) is in a1,so don't change these
-	 * registers until their contents are no longer needed.
-	 */
-
-	/* save sr */
-	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)
-
-	/* save fs (sfc,%dfc) (may be pointing to kernel memory) */
-	movec	%sfc,%d0
-	movew	%d0,%a0@(TASK_THREAD+THREAD_FS)
-
-	/* save usp */
-	/* it is better to use a movel here instead of a movew 8*) */
-	movec	%usp,%d0
-	movel	%d0,%a0@(TASK_THREAD+THREAD_USP)
-
-	/* save non-scratch registers on stack */
-	SAVE_SWITCH_STACK
-
-	/* save current kernel stack pointer */
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP)
-
-	/* save floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
-	tstl	m68k_fputype
-	jeq	3f
-#endif
-	fsave	%a0@(TASK_THREAD+THREAD_FPSTATE)
-
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	beqs	1f
-#endif
-	/* The 060 FPU keeps status in bits 15-8 of the first longword */
-	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE+2)
-	jeq	3f
-#if !defined(CPU_M68060_ONLY)
-	jra	2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1:	tstb	%a0@(TASK_THREAD+THREAD_FPSTATE)
-	jeq	3f
-#endif
-2:	fmovemx	%fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
-	fmoveml	%fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
-3:
-#endif	/* CONFIG_M68KFPU_EMU_ONLY */
-	/* Return previous task in %d1 */
-	movel	%curptr,%d1
-
-	/* switch to new task (a1 contains new task) */
-	movel	%a1,%curptr
-
-	/* restore floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
-	tstl	m68k_fputype
-	jeq	4f
-#endif
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
-	btst	#3,m68k_cputype+3
-	beqs	1f
-#endif
-	/* The 060 FPU keeps status in bits 15-8 of the first longword */
-	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE+2)
-	jeq	3f
-#if !defined(CPU_M68060_ONLY)
-	jra	2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1:	tstb	%a1@(TASK_THREAD+THREAD_FPSTATE)
-	jeq	3f
-#endif
-2:	fmovemx	%a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
-	fmoveml	%a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
-3:	frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
-4:
-#endif	/* CONFIG_M68KFPU_EMU_ONLY */
-
-	/* restore the kernel stack pointer */
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp
-
-	/* restore non-scratch registers */
-	RESTORE_SWITCH_STACK
-
-	/* restore user stack pointer */
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a0
-	movel	%a0,%usp
-
-	/* restore fs (sfc,%dfc) */
-	movew	%a1@(TASK_THREAD+THREAD_FS),%a0
-	movec	%a0,%sfc
-	movec	%a0,%dfc
-
-	/* restore status register */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
-
-	rts
-
diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S
deleted file mode 100644
index d80cba45589f..000000000000
--- a/arch/m68k/kernel/entry_no.S
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/entry.S
- *
- *  Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *                      Kenneth Albanowski <kjahds@kjahds.com>,
- *  Copyright (C) 2000  Lineo Inc. (www.lineo.com) 
- *
- * Based on:
- *
- *  linux/arch/m68k/kernel/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- * ColdFire support by Greg Ungerer (gerg@snapgear.com)
- * 5307 fixes by David W. Miller
- * linux 2.4 support David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-#include <asm/unistd.h>
-
-.text
-
-.globl buserr
-.globl trap
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_fork
-.globl sys_clone
-.globl sys_vfork
-
-ENTRY(buserr)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	buserr_c
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(trap)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	trap_c
-	addql	#4,%sp
-	jra	ret_from_exception
-
-#ifdef TRAP_DBG_INTERRUPT
-
-.globl dbginterrupt
-ENTRY(dbginterrupt)
-	SAVE_ALL_INT
-	GET_CURRENT(%d0)
-	movel	%sp,%sp@- 		/* stack frame pointer argument */
-	jsr	dbginterrupt_c
-	addql	#4,%sp
-	jra	ret_from_exception
-#endif
-
-ENTRY(reschedule)
-	/* save top of frame */
-	pea	%sp@
-	jbsr	set_esp0
-	addql	#4,%sp
-	pea	ret_from_exception
-	jmp	schedule
-
-ENTRY(ret_from_fork)
-	movel	%d1,%sp@-
-	jsr	schedule_tail
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(sys_fork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_fork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_vfork)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_vfork
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_clone)
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	jbsr	m68k_clone
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(sys_rt_sigreturn)
-	SAVE_SWITCH_STACK
-	jbsr	do_rt_sigreturn
-	RESTORE_SWITCH_STACK
-	rts
-
-ENTRY(ret_from_user_signal)
-	moveq #__NR_sigreturn,%d0
-	trap #0
-
-ENTRY(ret_from_user_rt_signal)
-	movel #__NR_rt_sigreturn,%d0
-	trap #0
-
diff --git a/arch/m68k/kernel/pcibios.c b/arch/m68k/kernel/pcibios.c
new file mode 100644
index 000000000000..b2988aa1840b
--- /dev/null
+++ b/arch/m68k/kernel/pcibios.c
@@ -0,0 +1,109 @@
+/*
+ * pci.c -- basic PCI support code
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+	resource_size_t size, resource_size_t align)
+{
+	resource_size_t start = res->start;
+
+	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+		start = (start + 0x3ff) & ~0x3ff;
+
+	start = (start + align - 1) & ~(align - 1);
+
+	return start;
+}
+
+/*
+ * This is taken from the ARM code for this.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	struct resource *r;
+	u16 cmd, newcmd;
+	int idx;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	newcmd = cmd;
+
+	for (idx = 0; idx < 6; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1 << idx)))
+			continue;
+
+		r = dev->resource + idx;
+		if (!r->start && r->end) {
+			pr_err(KERN_ERR "PCI: Device %s not available because of resource collisions\n",
+				pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			newcmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			newcmd |= PCI_COMMAND_MEMORY;
+	}
+
+	/*
+	 * Bridges (eg, cardbus bridges) need to be fully enabled
+	 */
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+		newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+
+	if (newcmd != cmd) {
+		pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
+			pci_name(dev), cmd, newcmd);
+		pci_write_config_word(dev, PCI_COMMAND, newcmd);
+	}
+	return 0;
+}
+
+void pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
+		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
+	}
+}
+
+char __devinit *pcibios_setup(char *str)
+{
+	return str;
+}
+