Merge branch 'master' into for-next

Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.

1 files changed, 176 insertions, 0 deletions

diff --git a/arch/m68k/platform/5272/config.c b/arch/m68k/platform/5272/config.c
new file mode 100644
index 000000000000..65bb582734e1
--- /dev/null
+++ b/arch/m68k/platform/5272/config.c
@@ -0,0 +1,176 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/5272/config.c
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+
+/***************************************************************************/
+
+/*
+ *	Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+static struct mcf_platform_uart m5272_uart_platform[] = {
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.irq		= MCF_IRQ_UART1,
+	},
+	{
+		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
+		.irq		= MCF_IRQ_UART2,
+	},
+	{ },
+};
+
+static struct platform_device m5272_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= m5272_uart_platform,
+};
+
+static struct resource m5272_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x840,
+		.end		= MCF_MBAR + 0x840 + 0x1cf,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_ERX,
+		.end		= MCF_IRQ_ERX,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_ETX,
+		.end		= MCF_IRQ_ETX,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_ENTC,
+		.end		= MCF_IRQ_ENTC,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5272_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5272_fec_resources),
+	.resource		= m5272_fec_resources,
+};
+
+static struct platform_device *m5272_devices[] __initdata = {
+	&m5272_uart,
+	&m5272_fec,
+};
+
+/***************************************************************************/
+
+static void __init m5272_uart_init_line(int line, int irq)
+{
+	u32 v;
+
+	if ((line >= 0) && (line < 2)) {
+		/* Enable the output lines for the serial ports */
+		v = readl(MCF_MBAR + MCFSIM_PBCNT);
+		v = (v & ~0x000000ff) | 0x00000055;
+		writel(v, MCF_MBAR + MCFSIM_PBCNT);
+
+		v = readl(MCF_MBAR + MCFSIM_PDCNT);
+		v = (v & ~0x000003fc) | 0x000002a8;
+		writel(v, MCF_MBAR + MCFSIM_PDCNT);
+	}
+}
+
+static void __init m5272_uarts_init(void)
+{
+	const int nrlines = ARRAY_SIZE(m5272_uart_platform);
+	int line;
+
+	for (line = 0; (line < nrlines); line++)
+		m5272_uart_init_line(line, m5272_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
+static void m5272_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to reset, and enabled */
+	__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
+	__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
+	__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined (CONFIG_MOD5272)
+	volatile unsigned char	*pivrp;
+
+	/* Set base of device vectors to be 64 */
+	pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
+	*pivrp = 0x40;
+#endif
+
+#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#elif defined(CONFIG_CANCam)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0010000, size);
+	commandp[size-1] = 0;
+#endif
+
+	mach_reset = m5272_cpu_reset;
+}
+
+/***************************************************************************/
+
+/*
+ * Some 5272 based boards have the FEC ethernet diectly connected to
+ * an ethernet switch. In this case we need to use the fixed phy type,
+ * and we need to declare it early in boot.
+ */
+static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
+	.link	= 1,
+	.speed	= 100,
+	.duplex	= 0,
+};
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	m5272_uarts_init();
+	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
+	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/