diff options
| author | Thomas Gleixner <tglx@linutronix.de> | 2011-05-14 12:06:36 +0200 |
|---|---|---|
| committer | Thomas Gleixner <tglx@linutronix.de> | 2011-05-14 12:06:36 +0200 |
| commit | a18f22a968de17b29f2310cdb7ba69163e65ec15 (patch) | |
| tree | a7d56d88fad5e444d7661484109758a2f436129e /arch/microblaze | |
| parent | blackfin: convert to clocksource_register_hz (diff) | |
| parent | clocksource: convert mips to generic i8253 clocksource (diff) | |
| download | linux-a18f22a968de17b29f2310cdb7ba69163e65ec15.tar.xz linux-a18f22a968de17b29f2310cdb7ba69163e65ec15.zip | |
Merge branch 'consolidate-clksrc-i8253' of master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource
Conflicts:
arch/ia64/kernel/cyclone.c
arch/mips/kernel/i8253.c
arch/x86/kernel/i8253.c
Reason: Resolve conflicts so further cleanups do not conflict further
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'arch/microblaze')
56 files changed, 417 insertions, 485 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 31680032053e..eccdefe70d4e 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,7 +6,6 @@ config MICROBLAZE select HAVE_FUNCTION_GRAPH_TRACER select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE_MCOUNT_RECORD - select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_OPROFILE select HAVE_ARCH_KGDB @@ -17,6 +16,7 @@ config MICROBLAZE select OF_EARLY_FLATTREE select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW config SWAP def_bool n @@ -36,6 +36,9 @@ config ARCH_HAS_ILOG2_U64 config GENERIC_FIND_NEXT_BIT def_bool y +config GENERIC_FIND_BIT_LE + def_bool y + config GENERIC_HWEIGHT def_bool y @@ -183,6 +186,17 @@ config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL default "0x30000000" +config MANUAL_RESET_VECTOR + hex "Microblaze reset vector address setup" + default "0x0" + help + Set this option to have the kernel override the CPU Reset vector. + If zero, no change will be made to the MicroBlaze reset vector at + address 0x0. + If non-zero, a jump instruction to this address, will be written + to the reset vector at address 0x0. + If you are unsure, set it to default value 0x0. + config KERNEL_START_BOOL bool "Set custom kernel base address" depends on ADVANCED_OPTIONS @@ -247,7 +261,7 @@ endmenu source "mm/Kconfig" -menu "Exectuable file formats" +menu "Executable file formats" source "fs/Kconfig.binfmt" diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 6f432e6df9af..b23c40eb7a52 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -18,7 +18,7 @@ export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV # rather than bools y/n # Work out HW multipler support. This is tricky. -# 1. Spartan2 has no HW multiplers. +# 1. Spartan2 has no HW multipliers. # 2. MicroBlaze v3.x always uses them, except in Spartan 2 # 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index 7ebd955460d9..0f553bc009a0 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -84,12 +84,13 @@ do { \ #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) - #define flush_cache_dup_mm(mm) do { } while (0) #define flush_cache_vmap(start, end) do { } while (0) #define flush_cache_vunmap(start, end) do { } while (0) #define flush_cache_mm(mm) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) + +#define flush_cache_page(vma, vmaddr, pfn) \ + flush_dcache_range(pfn << PAGE_SHIFT, (pfn << PAGE_SHIFT) + PAGE_SIZE); /* MS: kgdb code use this macro, wrong len with FLASH */ #if 0 @@ -104,9 +105,13 @@ do { \ #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ u32 addr = virt_to_phys(dst); \ - invalidate_icache_range((unsigned) (addr), (unsigned) (addr) + (len));\ memcpy((dst), (src), (len)); \ - flush_dcache_range((unsigned) (addr), (unsigned) (addr) + (len));\ + if (vma->vm_flags & VM_EXEC) { \ + invalidate_icache_range((unsigned) (addr), \ + (unsigned) (addr) + PAGE_SIZE); \ + flush_dcache_range((unsigned) (addr), \ + (unsigned) (addr) + PAGE_SIZE); \ + } \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h index cd257537ae54..d8f013347a9e 100644 --- a/arch/microblaze/include/asm/cpuinfo.h +++ b/arch/microblaze/include/asm/cpuinfo.h @@ -96,8 +96,8 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu); static inline unsigned int fcpu(struct device_node *cpu, char *n) { - int *val; - return (val = (int *) of_get_property(cpu, n, NULL)) ? + const __be32 *val; + return (val = of_get_property(cpu, n, NULL)) ? be32_to_cpup(val) : 0; } diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index ec89f2ad0fe1..af0144b91b79 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -31,40 +31,4 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ # endif /* __ASSEMBLY__ */ -#ifndef CONFIG_MMU - -/* noMMU hasn't any space for args */ -# define STATE_SAVE_ARG_SPACE (0) - -#else /* CONFIG_MMU */ - -/* If true, system calls save and restore all registers (except result - * registers, of course). If false, then `call clobbered' registers - * will not be preserved, on the theory that system calls are basically - * function calls anyway, and the caller should be able to deal with it. - * This is a security risk, of course, as `internal' values may leak out - * after a system call, but that certainly doesn't matter very much for - * a processor with no MMU protection! For a protected-mode kernel, it - * would be faster to just zero those registers before returning. - * - * I can not rely on the glibc implementation. If you turn it off make - * sure that r11/r12 is saved in user-space. --KAA - * - * These are special variables using by the kernel trap/interrupt code - * to save registers in, at a time when there are no spare registers we - * can use to do so, and we can't depend on the value of the stack - * pointer. This means that they must be within a signed 16-bit - * displacement of 0x00000000. - */ - -/* A `state save frame' is a struct pt_regs preceded by some extra space - * suitable for a function call stack frame. */ - -/* Amount of room on the stack reserved for arguments and to satisfy the - * C calling conventions, in addition to the space used by the struct - * pt_regs that actually holds saved values. */ -#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments */ - -#endif /* CONFIG_MMU */ - #endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 6479097b802b..e6a8ddea1dca 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -66,6 +66,9 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, int fsr, int addr); +asmlinkage void sw_exception(struct pt_regs *regs); +void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig); + void die(const char *str, struct pt_regs *fp, long err); void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index ad3fd61b2fe7..b0526d2716fa 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -29,7 +29,7 @@ }) static inline int -futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) { int op = (encoded_op >> 28) & 7; int cmp = (encoded_op >> 24) & 15; @@ -39,7 +39,7 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr) if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; pagefault_disable(); @@ -94,31 +94,34 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr) } static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) { - int prev, cmp; + int ret = 0, cmp; + u32 prev; - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; - __asm__ __volatile__ ("1: lwx %0, %2, r0; \ - cmp %1, %0, %3; \ - beqi %1, 3f; \ - 2: swx %4, %2, r0; \ - addic %1, r0, 0; \ - bnei %1, 1b; \ + __asm__ __volatile__ ("1: lwx %1, %3, r0; \ + cmp %2, %1, %4; \ + beqi %2, 3f; \ + 2: swx %5, %3, r0; \ + addic %2, r0, 0; \ + bnei %2, 1b; \ 3: \ .section .fixup,\"ax\"; \ 4: brid 3b; \ - addik %0, r0, %5; \ + addik %0, r0, %6; \ .previous; \ .section __ex_table,\"a\"; \ .word 1b,4b,2b,4b; \ .previous;" \ - : "=&r" (prev), "=&r"(cmp) \ + : "+r" (ret), "=&r" (prev), "=&r"(cmp) \ : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)); - return prev; + *uval = prev; + return ret; } #endif /* __KERNEL__ */ diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index eae32220f447..8cdac14b55b0 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -70,7 +70,7 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) /* * read (readb, readw, readl, readq) and write (writeb, writew, - * writel, writeq) accessors are for PCI and thus littel endian. + * writel, writeq) accessors are for PCI and thus little endian. * Linux 2.4 for Microblaze had this wrong. */ static inline unsigned char readb(const volatile void __iomem *addr) diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index ec5583d6111c..cc54187f3d38 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -12,8 +12,6 @@ #define NR_IRQS 32 #include <asm-generic/irq.h> -#include <linux/interrupt.h> - /* This type is the placeholder for a hardware interrupt number. It has to * be big enough to enclose whatever representation is used by a given * platform. diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 0c68764ab547..746df91e5796 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -76,7 +76,7 @@ struct pci_controller { * Used for variants of PCI indirect handling and possible quirks: * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS + * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS * to determine which bus number to match on when generating type0 * config cycles @@ -104,11 +104,22 @@ struct pci_controller { int global_number; /* PCI domain number */ }; +#ifdef CONFIG_PCI static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it @@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) */ return 0; } +#endif /* CONFIG_PCI */ /* These are used for config access before all the PCI probing has been done. */ diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 2232ff942ba9..ba65cf472544 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -158,7 +158,7 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar, extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus); -/* This part of code was originaly in xilinx-pci.h */ +/* This part of code was originally in xilinx-pci.h */ #ifdef CONFIG_PCI_XILINX extern void __init xilinx_pci_init(void); #else diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index 885574a73f01..b2af42311a12 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -572,7 +572,7 @@ void __init *early_get_page(void); extern unsigned long ioremap_bot, ioremap_base; -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle); +void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); void consistent_free(size_t size, void *vaddr); void consistent_sync(void *vaddr, size_t size, int direction); void consistent_sync_page(struct page *page, unsigned long offset, diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 8eeb09211ece..aed2a6be8e27 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -155,7 +155,7 @@ unsigned long get_wchan(struct task_struct *p); # define task_regs(task) ((struct pt_regs *)task_tos(task) - 1) # define task_pt_regs_plus_args(tsk) \ - (((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE) + ((void *)task_pt_regs(tsk)) # define task_sp(task) (task_regs(task)->r1) # define task_pc(task) (task_regs(task)->pc) diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 2e72af078b05..d0890d36ef61 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void); /* CPU OF node matching */ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index d74dbfb92c04..d9b66304d5dd 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -66,13 +66,13 @@ void show_regs(struct pt_regs *); #else /* __KERNEL__ */ /* pt_regs offsets used by gdbserver etc in ptrace syscalls */ -#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t)) -#define PT_PC (32 * sizeof(microblaze_reg_t)) -#define PT_MSR (33 * sizeof(microblaze_reg_t)) -#define PT_EAR (34 * sizeof(microblaze_reg_t)) -#define PT_ESR (35 * sizeof(microblaze_reg_t)) -#define PT_FSR (36 * sizeof(microblaze_reg_t)) -#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t)) +#define PT_GPR(n) ((n) * sizeof(microblaze_reg_t)) +#define PT_PC (32 * sizeof(microblaze_reg_t)) +#define PT_MSR (33 * sizeof(microblaze_reg_t)) +#define PT_EAR (34 * sizeof(microblaze_reg_t)) +#define PT_ESR (35 * sizeof(microblaze_reg_t)) +#define PT_FSR (36 * sizeof(microblaze_reg_t)) +#define PT_KERNEL_MODE (37 * sizeof(microblaze_reg_t)) #endif /* __KERNEL */ diff --git a/arch/microblaze/include/asm/syscall.h b/arch/microblaze/include/asm/syscall.h index 048dfcd8d89d..9bc431783105 100644 --- a/arch/microblaze/include/asm/syscall.h +++ b/arch/microblaze/include/asm/syscall.h @@ -96,4 +96,7 @@ static inline void syscall_set_arguments(struct task_struct *task, microblaze_set_syscall_arg(regs, i++, *args++); } +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs); +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs); + #endif /* __ASM_MICROBLAZE_SYSCALL_H */ diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h index 720761cc741f..27f2f4c0f39f 100644 --- a/arch/microblaze/include/asm/syscalls.h +++ b/arch/microblaze/include/asm/syscalls.h @@ -1,5 +1,13 @@ #ifndef __ASM_MICROBLAZE_SYSCALLS_H +asmlinkage long microblaze_vfork(struct pt_regs *regs); +asmlinkage long microblaze_clone(int flags, unsigned long stack, + struct pt_regs *regs); +asmlinkage long microblaze_execve(const char __user *filenamei, + const char __user *const __user *argv, + const char __user *const __user *envp, + struct pt_regs *regs); + asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs); #define sys_clone sys_clone diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index d840f4a2d3c9..5bb95a11880d 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -120,16 +120,16 @@ static inline unsigned long __must_check __clear_user(void __user *to, { /* normal memset with two words to __ex_table */ __asm__ __volatile__ ( \ - "1: sb r0, %2, r0;" \ + "1: sb r0, %1, r0;" \ " addik %0, %0, -1;" \ " bneid %0, 1b;" \ - " addik %2, %2, 1;" \ + " addik %1, %1, 1;" \ "2: " \ __EX_TABLE_SECTION \ ".word 1b,2b;" \ ".previous;" \ - : "=r"(n) \ - : "0"(n), "r"(to) + : "=r"(n), "=r"(to) \ + : "0"(n), "1"(to) ); return n; } diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h index 2b97cbe500e9..b162ed880495 100644 --- a/arch/microblaze/include/asm/unaligned.h +++ b/arch/microblaze/include/asm/unaligned.h @@ -12,18 +12,19 @@ # ifdef __KERNEL__ -# include <linux/unaligned/be_byteshift.h> -# include <linux/unaligned/le_byteshift.h> -# include <linux/unaligned/generic.h> - - # ifdef __MICROBLAZEEL__ +# include <linux/unaligned/le_struct.h> +# include <linux/unaligned/be_byteshift.h> # define get_unaligned __get_unaligned_le # define put_unaligned __put_unaligned_le # else +# include <linux/unaligned/be_struct.h> +# include <linux/unaligned/le_byteshift.h> # define get_unaligned __get_unaligned_be # define put_unaligned __put_unaligned_be # endif +# include <linux/unaligned/generic.h> + # endif /* __KERNEL__ */ #endif /* _ASM_MICROBLAZE_UNALIGNED_H */ diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index d770b00ec6b1..30edd61a6b8f 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -386,8 +386,12 @@ #define __NR_fanotify_init 368 #define __NR_fanotify_mark 369 #define __NR_prlimit64 370 +#define __NR_name_to_handle_at 371 +#define __NR_open_by_handle_at 372 +#define __NR_clock_adjtime 373 +#define __NR_syncfs 374 -#define __NR_syscalls 371 +#define __NR_syscalls 375 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index f0cb5c26c81c..494b63b72dd7 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -10,6 +10,7 @@ CFLAGS_REMOVE_early_printk.o = -pg CFLAGS_REMOVE_selfmod.o = -pg CFLAGS_REMOVE_heartbeat.o = -pg CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_process.o = -pg endif extra-y := head.o vmlinux.lds diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile index 59cc7bceaf8c..fceed4edea41 100644 --- a/arch/microblaze/kernel/cpu/Makefile +++ b/arch/microblaze/kernel/cpu/Makefile @@ -6,7 +6,7 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_cache.o = -pg endif -EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ +ccflags-y := -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ -DCPU_REV=$(CPU_REV) obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 109876e8d643..4b7d8a3f4aef 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -129,7 +129,7 @@ do { \ * to use for simple wdc or wic. * * start address is cache aligned - * end address is not aligned, if end is aligned then I have to substract + * end address is not aligned, if end is aligned then I have to subtract * cacheline length because I can't flush/invalidate the next cacheline. * If is not, I align it because I will flush/invalidate whole line. */ @@ -519,7 +519,7 @@ static void __flush_dcache_range_wb(unsigned long start, unsigned long end) struct scache *mbc; /* new wb cache model */ -const struct scache wb_msr = { +static const struct scache wb_msr = { .ie = __enable_icache_msr, .id = __disable_icache_msr, .ifl = __flush_icache_all_noirq, @@ -535,7 +535,7 @@ const struct scache wb_msr = { }; /* There is only difference in ie, id, de, dd functions */ -const struct scache wb_nomsr = { +static const struct scache wb_nomsr = { .ie = __enable_icache_nomsr, .id = __disable_icache_nomsr, .ifl = __flush_icache_all_noirq, @@ -551,7 +551,7 @@ const struct scache wb_nomsr = { }; /* Old wt cache model with disabling irq and turn off cache */ -const struct scache wt_msr = { +static const struct scache wt_msr = { .ie = __enable_icache_msr, .id = __disable_icache_msr, .ifl = __flush_icache_all_msr_irq, @@ -566,7 +566,7 @@ const struct scache wt_msr = { .dinr = __invalidate_dcache_range_msr_irq_wt, }; -const struct scache wt_nomsr = { +static const struct scache wt_nomsr = { .ie = __enable_icache_nomsr, .id = __disable_icache_nomsr, .ifl = __flush_icache_all_nomsr_irq, @@ -582,7 +582,7 @@ const struct scache wt_nomsr = { }; /* New wt cache model for newer Microblaze versions */ -const struct scache wt_msr_noirq = { +static const struct scache wt_msr_noirq = { .ie = __enable_icache_msr, .id = __disable_icache_msr, .ifl = __flush_icache_all_noirq, @@ -597,7 +597,7 @@ const struct scache wt_msr_noirq = { .dinr = __invalidate_dcache_range_nomsr_wt, }; -const struct scache wt_nomsr_noirq = { +static const struct scache wt_nomsr_noirq = { .ie = __enable_icache_nomsr, .id = __disable_icache_nomsr, .ifl = __flush_icache_all_noirq, @@ -624,7 +624,7 @@ void microblaze_cache_init(void) if (cpuinfo.dcache_wb) { INFO("wb_msr"); mbc = (struct scache *)&wb_msr; - if (cpuinfo.ver_code < CPUVER_7_20_D) { + if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ INFO("WB won't work properly"); } @@ -641,7 +641,7 @@ void microblaze_cache_init(void) if (cpuinfo.dcache_wb) { INFO("wb_nomsr"); mbc = (struct scache *)&wb_nomsr; - if (cpuinfo.ver_code < CPUVER_7_20_D) { + if (cpuinfo.ver_code <= CPUVER_7_20_D) { /* MS: problem with signal handling - hw bug */ INFO("WB won't work properly"); } diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 2c309fccf230..c1640c52711f 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -33,6 +33,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.30.b", 0x11}, {"8.00.a", 0x12}, {"8.00.b", 0x13}, + {"8.10.a", 0x14}, {NULL, 0}, }; diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index 79c74659f204..393e6b2db688 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -26,6 +26,7 @@ static inline void __dma_sync_page(unsigned long paddr, unsigned long offset, { switch (direction) { case DMA_TO_DEVICE: + case DMA_BIDIRECTIONAL: flush_dcache_range(paddr + offset, paddr + offset + size); break; case DMA_FROM_DEVICE: diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index ca84368570b6..34b526f59b43 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -115,7 +115,7 @@ ENTRY(_interrupt) /* restore r31 */ lwi r31, r0, PER_CPU(CURRENT_SAVE) /* prepare the link register, the argument and jump */ - la r15, r0, ret_from_intr - 8 + addik r15, r0, ret_from_intr - 8 addk r6, r0, r15 braid do_IRQ add r5, r0, r1 @@ -283,7 +283,7 @@ ENTRY(_user_exception) add r12, r12, r12 /* convert num -> ptr */ add r12, r12, r12 lwi r12, r12, sys_call_table /* Get function pointer */ - la r15, r0, ret_to_user-8 /* set return address */ + addik r15, r0, ret_to_user-8 /* set return address */ bra r12 /* Make the system call. */ bri 0 /* won't reach here */ 1: diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index 41c30cdb2704..ca15bc5c7449 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -33,11 +33,14 @@ #undef DEBUG -/* The size of a state save frame. */ -#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE) - -/* The offset of the struct pt_regs in a `state save frame' on the stack. */ -#define PTO STATE_SAVE_ARG_SPACE /* 24 the space for args */ +#ifdef DEBUG +/* Create space for syscalls counting. */ +.section .data +.global syscall_debug_table +.align 4 +syscall_debug_table: + .space (__NR_syscalls * 4) +#endif /* DEBUG */ #define C_ENTRY(name) .globl name; .align 4; name @@ -172,72 +175,72 @@ 1: #define SAVE_REGS \ - swi r2, r1, PTO+PT_R2; /* Save SDA */ \ - swi r3, r1, PTO+PT_R3; \ - swi r4, r1, PTO+PT_R4; \ - swi r5, r1, PTO+PT_R5; \ - swi r6, r1, PTO+PT_R6; \ - swi r7, r1, PTO+PT_R7; \ - swi r8, r1, PTO+PT_R8; \ - swi r9, r1, PTO+PT_R9; \ - swi r10, r1, PTO+PT_R10; \ - swi r11, r1, PTO+PT_R11; /* save clobbered regs after rval */\ - swi r12, r1, PTO+PT_R12; \ - swi r13, r1, PTO+PT_R13; /* Save SDA2 */ \ - swi r14, r1, PTO+PT_PC; /* PC, before IRQ/trap */ \ - swi r15, r1, PTO+PT_R15; /* Save LP */ \ - swi r16, r1, PTO+PT_R16; \ - swi r17, r1, PTO+PT_R17; \ - swi r18, r1, PTO+PT_R18; /* Save asm scratch reg */ \ - swi r19, r1, PTO+PT_R19; \ - swi r20, r1, PTO+PT_R20; \ - swi r21, r1, PTO+PT_R21; \ - swi r22, r1, PTO+PT_R22; \ - swi r23, r1, PTO+PT_R23; \ - swi r24, r1, PTO+PT_R24; \ - swi r25, r1, PTO+PT_R25; \ - swi r26, r1, PTO+PT_R26; \ - swi r27, r1, PTO+PT_R27; \ - swi r28, r1, PTO+PT_R28; \ - swi r29, r1, PTO+PT_R29; \ - swi r30, r1, PTO+PT_R30; \ - swi r31, r1, PTO+PT_R31; /* Save current task reg */ \ + swi r2, r1, PT_R2; /* Save SDA */ \ + swi r3, r1, PT_R3; \ + swi r4, r1, PT_R4; \ + swi r5, r1, PT_R5; \ + swi r6, r1, PT_R6; \ + swi r7, r1, PT_R7; \ + swi r8, r1, PT_R8; \ + swi r9, r1, PT_R9; \ + swi r10, r1, PT_R10; \ + swi r11, r1, PT_R11; /* save clobbered regs after rval */\ + swi r12, r1, PT_R12; \ + swi r13, r1, PT_R13; /* Save SDA2 */ \ + swi r14, r1, PT_PC; /* PC, before IRQ/trap */ \ + swi r15, r1, PT_R15; /* Save LP */ \ + swi r16, r1, PT_R16; \ + swi r17, r1, PT_R17; \ + swi r18, r1, PT_R18; /* Save asm scratch reg */ \ + swi r19, r1, PT_R19; \ + swi r20, r1, PT_R20; \ + swi r21, r1, PT_R21; \ + swi r22, r1, PT_R22; \ + swi r23, r1, PT_R23; \ + swi r24, r1, PT_R24; \ + swi r25, r1, PT_R25; \ + swi r26, r1, PT_R26; \ + swi r27, r1, PT_R27; \ + swi r28, r1, PT_R28; \ + swi r29, r1, PT_R29; \ + swi r30, r1, PT_R30; \ + swi r31, r1, PT_R31; /* Save current task reg */ \ mfs r11, rmsr; /* save MSR */ \ - swi r11, r1, PTO+PT_MSR; + swi r11, r1, PT_MSR; #define RESTORE_REGS \ - lwi r11, r1, PTO+PT_MSR; \ + lwi r11, r1, PT_MSR; \ mts rmsr , r11; \ - lwi r2, r1, PTO+PT_R2; /* restore SDA */ \ - lwi r3, r1, PTO+PT_R3; \ - lwi r4, r1, PTO+PT_R4; \ - lwi r5, r1, PTO+PT_R5; \ - lwi r6, r1, PTO+PT_R6; \ - lwi r7, r1, PTO+PT_R7; \ - lwi r8, r1, PTO+PT_R8; \ - lwi r9, r1, PTO+PT_R9; \ - lwi r10, r1, PTO+PT_R10; \ - lwi r11, r1, PTO+PT_R11; /* restore clobbered regs after rval */\ - lwi r12, r1, PTO+PT_R12; \ - lwi r13, r1, PTO+PT_R13; /* restore SDA2 */ \ - lwi r14, r1, PTO+PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\ - lwi r15, r1, PTO+PT_R15; /* restore LP */ \ - lwi r16, r1, PTO+PT_R16; \ - lwi r17, r1, PTO+PT_R17; \ - lwi r18, r1, PTO+PT_R18; /* restore asm scratch reg */ \ - lwi r19, r1, PTO+PT_R19; \ - lwi r20, r1, PTO+PT_R20; \ - lwi r21, r1, PTO+PT_R21; \ - lwi r22, r1, PTO+PT_R22; \ - lwi r23, r1, PTO+PT_R23; \ - lwi r24, r1, PTO+PT_R24; \ - lwi r25, r1, PTO+PT_R25; \ - lwi r26, r1, PTO+PT_R26; \ - lwi r27, r1, PTO+PT_R27; \ - lwi r28, r1, PTO+PT_R28; \ - lwi r29, r1, PTO+PT_R29; \ - lwi r30, r1, PTO+PT_R30; \ - lwi r31, r1, PTO+PT_R31; /* Restore cur task reg */ + lwi r2, r1, PT_R2; /* restore SDA */ \ + lwi r3, r1, PT_R3; \ + lwi r4, r1, PT_R4; \ + lwi r5, r1, PT_R5; \ + lwi r6, r1, PT_R6; \ + lwi r7, r1, PT_R7; \ + lwi r8, r1, PT_R8; \ + lwi r9, r1, PT_R9; \ + lwi r10, r1, PT_R10; \ + lwi r11, r1, PT_R11; /* restore clobbered regs after rval */\ + lwi r12, r1, PT_R12; \ + lwi r13, r1, PT_R13; /* restore SDA2 */ \ + lwi r14, r1, PT_PC; /* RESTORE_LINK PC, before IRQ/trap */\ + lwi r15, r1, PT_R15; /* restore LP */ \ + lwi r16, r1, PT_R16; \ + lwi r17, r1, PT_R17; \ + lwi r18, r1, PT_R18; /* restore asm scratch reg */ \ + lwi r19, r1, PT_R19; \ + lwi r20, r1, PT_R20; \ + lwi r21, r1, PT_R21; \ + lwi r22, r1, PT_R22; \ + lwi r23, r1, PT_R23; \ + lwi r24, r1, PT_R24; \ + lwi r25, r1, PT_R25; \ + lwi r26, r1, PT_R26; \ + lwi r27, r1, PT_R27; \ + lwi r28, r1, PT_R28; \ + lwi r29, r1, PT_R29; \ + lwi r30, r1, PT_R30; \ + lwi r31, r1, PT_R31; /* Restore cur task reg */ #define SAVE_STATE \ swi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* save stack */ \ @@ -250,11 +253,11 @@ lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); \ /* FIXME: I can add these two lines to one */ \ /* tophys(r1,r1); */ \ - /* addik r1, r1, -STATE_SAVE_SIZE; */ \ - addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; \ + /* addik r1, r1, -PT_SIZE; */ \ + addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; \ SAVE_REGS \ brid 2f; \ - swi r1, r1, PTO+PT_MODE; \ + swi r1, r1, PT_MODE; \ 1: /* User-mode state save. */ \ lwi r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\ tophys(r1,r1); \ @@ -262,12 +265,12 @@ /* MS these three instructions can be added to one */ \ /* addik r1, r1, THREAD_SIZE; */ \ /* tophys(r1,r1); */ \ - /* addik r1, r1, -STATE_SAVE_SIZE; */ \ - addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; \ + /* addik r1, r1, -PT_SIZE; */ \ + addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; \ SAVE_REGS \ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); \ - swi r11, r1, PTO+PT_R1; /* Store user SP. */ \ - swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */ \ + swi r11, r1, PT_R1; /* Store user SP. */ \ + swi r0, r1, PT_MODE; /* Was in user-mode. */ \ /* MS: I am clearing UMS even in case when I come from kernel space */ \ clear_ums; \ 2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); @@ -299,10 +302,10 @@ C_ENTRY(_user_exception): lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ tophys(r1,r1); - addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ + addik r1, r1, -PT_SIZE; /* Make room on the stack. */ SAVE_REGS - swi r1, r1, PTO + PT_MODE; /* pt_regs -> kernel mode */ + swi r1, r1, PT_MODE; /* pt_regs -> kernel mode */ brid 2f; nop; /* Fill delay slot */ @@ -315,18 +318,18 @@ C_ENTRY(_user_exception): addik r1, r1, THREAD_SIZE; tophys(r1,r1); - addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ + addik r1, r1, -PT_SIZE; /* Make room on the stack. */ SAVE_REGS - swi r0, r1, PTO + PT_R3 - swi r0, r1, PTO + PT_R4 + swi r0, r1, PT_R3 + swi r0, r1, PT_R4 - swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */ + swi r0, r1, PT_MODE; /* Was in user-mode. */ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); - swi r11, r1, PTO+PT_R1; /* Store user SP. */ + swi r11, r1, PT_R1; /* Store user SP. */ clear_ums; 2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* Save away the syscall number. */ - swi r12, r1, PTO+PT_R0; + swi r12, r1, PT_R0; tovirt(r1,r1) /* where the trap should return need -8 to adjust for rtsd r15, 8*/ @@ -345,18 +348,18 @@ C_ENTRY(_user_exception): beqi r11, 4f addik r3, r0, -ENOSYS - swi r3, r1, PTO + PT_R3 + swi r3, r1, PT_R3 brlid r15, do_syscall_trace_enter - addik r5, r1, PTO + PT_R0 + addik r5, r1, PT_R0 # do_syscall_trace_enter returns the new syscall nr. addk r12, r0, r3 - lwi r5, r1, PTO+PT_R5; - lwi r6, r1, PTO+PT_R6; - lwi r7, r1, PTO+PT_R7; - lwi r8, r1, PTO+PT_R8; - lwi r9, r1, PTO+PT_R9; - lwi r10, r1, PTO+PT_R10; + lwi r5, r1, PT_R5; + lwi r6, r1, PT_R6; + lwi r7, r1, PT_R7; + lwi r8, r1, PT_R8; + lwi r9, r1, PT_R9; + lwi r10, r1, PT_R10; 4: /* Jump to the appropriate function for the system call number in r12 * (r12 is not preserved), or return an error if r12 is not valid. @@ -371,10 +374,14 @@ C_ENTRY(_user_exception): add r12, r12, r12; #ifdef DEBUG - /* Trac syscalls and stored them to r0_ram */ - lwi r3, r12, 0x400 + r0_ram + /* Trac syscalls and stored them to syscall_debug_table */ + /* The first syscall location stores total syscall number */ + lwi r3, r0, syscall_debug_table + addi r3, r3, 1 + swi r3, r0, syscall_debug_table + lwi r3, r12, syscall_debug_table addi r3, r3, 1 - swi r3, r12, 0x400 + r0_ram + swi r3, r12, syscall_debug_table #endif # Find and jump into the syscall handler. @@ -391,10 +398,10 @@ C_ENTRY(_user_exception): /* Entry point used to return from a syscall/trap */ /* We re-enable BIP bit before state restore */ C_ENTRY(ret_from_trap): - swi r3, r1, PTO + PT_R3 - swi r4, r1, PTO + PT_R4 + swi r3, r1, PT_R3 + swi r4, r1, PT_R4 - lwi r11, r1, PTO + PT_MODE; + lwi r11, r1, PT_MODE; /* See if returning to kernel mode, if so, skip resched &c. */ bnei r11, 2f; /* We're returning to user mode, so check for various conditions that @@ -406,7 +413,7 @@ C_ENTRY(ret_from_trap): beqi r11, 1f brlid r15, do_syscall_trace_leave - addik r5, r1, PTO + PT_R0 + addik r5, r1, PT_R0 1: /* We're returning to user mode, so check for various conditions that * trigger rescheduling. */ @@ -426,7 +433,7 @@ C_ENTRY(ret_from_trap): andi r11, r11, _TIF_SIGPENDING; beqi r11, 1f; /* Signals to handle, handle them */ - addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ + addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ addi r7, r0, 1; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ add r6, r0, r0; /* Arg 2: sigset_t *oldset */ @@ -437,7 +444,7 @@ C_ENTRY(ret_from_trap): VM_OFF; tophys(r1,r1); RESTORE_REGS; - addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ + addik r1, r1, PT_SIZE /* Clean up stack space. */ lwi r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */ bri 6f; @@ -446,7 +453,7 @@ C_ENTRY(ret_from_trap): VM_OFF; tophys(r1,r1); RESTORE_REGS; - addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ + addik r1, r1, PT_SIZE /* Clean up stack space. */ tovirt(r1,r1); 6: TRAP_return: /* Make global symbol for debugging */ @@ -459,8 +466,8 @@ TRAP_return: /* Make global symbol for debugging */ C_ENTRY(sys_fork_wrapper): addi r5, r0, SIGCHLD /* Arg 0: flags */ - lwi r6, r1, PTO+PT_R1 /* Arg 1: child SP (use parent's) */ - addik r7, r1, PTO /* Arg 2: parent context */ + lwi r6, r1, PT_R1 /* Arg 1: child SP (use parent's) */ + addik r7, r1, 0 /* Arg 2: parent context */ add r8. r0, r0 /* Arg 3: (unused) */ add r9, r0, r0; /* Arg 4: (unused) */ brid do_fork /* Do real work (tail-call) */ @@ -480,12 +487,12 @@ C_ENTRY(ret_from_fork): C_ENTRY(sys_vfork): brid microblaze_vfork /* Do real work (tail-call) */ - addik r5, r1, PTO + addik r5, r1, 0 C_ENTRY(sys_clone): bnei r6, 1f; /* See if child SP arg (arg 1) is 0. */ - lwi r6, r1, PTO + PT_R1; /* If so, use paret's stack ptr */ -1: addik r7, r1, PTO; /* Arg 2: parent context */ + lwi r6, r1, PT_R1; /* If so, use paret's stack ptr */ +1: addik r7, r1, 0; /* Arg 2: parent context */ add r8, r0, r0; /* Arg 3: (unused) */ add r9, r0, r0; /* Arg 4: (unused) */ brid do_fork /* Do real work (tail-call) */ @@ -493,11 +500,11 @@ C_ENTRY(sys_clone): C_ENTRY(sys_execve): brid microblaze_execve; /* Do real work (tail-call).*/ - addik r8, r1, PTO; /* add user context as 4th arg */ + addik r8, r1, 0; /* add user context as 4th arg */ C_ENTRY(sys_rt_sigreturn_wrapper): brid sys_rt_sigreturn /* Do real work */ - addik r5, r1, PTO; /* add user context as 1st arg */ + addik r5, r1, 0; /* add user context as 1st arg */ /* * HW EXCEPTION rutine start @@ -508,7 +515,7 @@ C_ENTRY(full_exception_trap): addik r17, r17, -4 SAVE_STATE /* Save registers */ /* PC, before IRQ/trap - this is one instruction above */ - swi r17, r1, PTO+PT_PC; + swi r17, r1, PT_PC; tovirt(r1,r1) /* FIXME this can be store directly in PT_ESR reg. * I tested it but there is a fault */ @@ -518,7 +525,7 @@ C_ENTRY(full_exception_trap): mfs r7, rfsr; /* save FSR */ mts rfsr, r0; /* Clear sticky fsr */ rted r0, full_exception - addik r5, r1, PTO /* parameter struct pt_regs * regs */ + addik r5, r1, 0 /* parameter struct pt_regs * regs */ /* * Unaligned data trap. @@ -544,14 +551,14 @@ C_ENTRY(unaligned_data_trap): lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); SAVE_STATE /* Save registers.*/ /* PC, before IRQ/trap - this is one instruction above */ - swi r17, r1, PTO+PT_PC; + swi r17, r1, PT_PC; tovirt(r1,r1) /* where the trap should return need -8 to adjust for rtsd r15, 8 */ addik r15, r0, ret_from_exc-8 mfs r3, resr /* ESR */ mfs r4, rear /* EAR */ rtbd r0, _unaligned_data_exception - addik r7, r1, PTO /* parameter struct pt_regs * regs */ + addik r7, r1, 0 /* parameter struct pt_regs * regs */ /* * Page fault traps. @@ -574,30 +581,30 @@ C_ENTRY(unaligned_data_trap): C_ENTRY(page_fault_data_trap): SAVE_STATE /* Save registers.*/ /* PC, before IRQ/trap - this is one instruction above */ - swi r17, r1, PTO+PT_PC; + swi r17, r1, PT_PC; tovirt(r1,r1) /* where the trap should return need -8 to adjust for rtsd r15, 8 */ addik r15, r0, ret_from_exc-8 mfs r6, rear /* parameter unsigned long address */ mfs r7, resr /* parameter unsigned long error_code */ rted r0, do_page_fault - addik r5, r1, PTO /* parameter struct pt_regs * regs */ + addik r5, r1, 0 /* parameter struct pt_regs * regs */ C_ENTRY(page_fault_instr_trap): SAVE_STATE /* Save registers.*/ /* PC, before IRQ/trap - this is one instruction above */ - swi r17, r1, PTO+PT_PC; + swi r17, r1, PT_PC; tovirt(r1,r1) /* where the trap should return need -8 to adjust for rtsd r15, 8 */ addik r15, r0, ret_from_exc-8 mfs r6, rear /* parameter unsigned long address */ ori r7, r0, 0 /* parameter unsigned long error_code */ rted r0, do_page_fault - addik r5, r1, PTO /* parameter struct pt_regs * regs */ + addik r5, r1, 0 /* parameter struct pt_regs * regs */ /* Entry point used to return from an exception. */ C_ENTRY(ret_from_exc): - lwi r11, r1, PTO + PT_MODE; + lwi r11, r1, PT_MODE; bnei r11, 2f; /* See if returning to kernel mode, */ /* ... if so, skip resched &c. */ @@ -629,7 +636,7 @@ C_ENTRY(ret_from_exc): * complete register state. Here we save anything not saved by * the normal entry sequence, so that it may be safely restored * (in a possibly modified form) after do_signal returns. */ - addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ + addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ addi r7, r0, 0; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ add r6, r0, r0; /* Arg 2: sigset_t *oldset */ @@ -641,7 +648,7 @@ C_ENTRY(ret_from_exc): tophys(r1,r1); RESTORE_REGS; - addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ + addik r1, r1, PT_SIZE /* Clean up stack space. */ lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */ bri 6f; @@ -650,7 +657,7 @@ C_ENTRY(ret_from_exc): VM_OFF; tophys(r1,r1); RESTORE_REGS; - addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space. */ + addik r1, r1, PT_SIZE /* Clean up stack space. */ tovirt(r1,r1); 6: @@ -683,10 +690,10 @@ C_ENTRY(_interrupt): tophys(r1,r1); /* MS: I have in r1 physical address where stack is */ /* save registers */ /* MS: Make room on the stack -> activation record */ - addik r1, r1, -STATE_SAVE_SIZE; + addik r1, r1, -PT_SIZE; SAVE_REGS brid 2f; - swi r1, r1, PTO + PT_MODE; /* 0 - user mode, 1 - kernel mode */ + swi r1, r1, PT_MODE; /* 0 - user mode, 1 - kernel mode */ 1: /* User-mode state save. */ /* MS: get the saved current */ @@ -696,23 +703,23 @@ C_ENTRY(_interrupt): addik r1, r1, THREAD_SIZE; tophys(r1,r1); /* save registers */ - addik r1, r1, -STATE_SAVE_SIZE; + addik r1, r1, -PT_SIZE; SAVE_REGS /* calculate mode */ - swi r0, r1, PTO + PT_MODE; + swi r0, r1, PT_MODE; lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); - swi r11, r1, PTO+PT_R1; + swi r11, r1, PT_R1; clear_ums; 2: lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); tovirt(r1,r1) addik r15, r0, irq_call; irq_call:rtbd r0, do_IRQ; - addik r5, r1, PTO; + addik r5, r1, 0; /* MS: we are in virtual mode */ ret_from_irq: - lwi r11, r1, PTO + PT_MODE; + lwi r11, r1, PT_MODE; bnei r11, 2f; lwi r11, CURRENT_TASK, TS_THREAD_INFO; @@ -729,7 +736,7 @@ ret_from_irq: beqid r11, no_intr_resched /* Handle a signal return; Pending signals should be in r18. */ addi r7, r0, 0; /* Arg 3: int in_syscall */ - addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ + addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ bralid r15, do_signal; /* Handle any signals */ add r6, r0, r0; /* Arg 2: sigset_t *oldset */ @@ -741,7 +748,7 @@ no_intr_resched: VM_OFF; tophys(r1,r1); RESTORE_REGS - addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */ + addik r1, r1, PT_SIZE /* MS: Clean up stack space. */ lwi r1, r1, PT_R1 - PT_SIZE; bri 6f; /* MS: Return to kernel state. */ @@ -769,7 +776,7 @@ restore: VM_OFF /* MS: turn off MMU */ tophys(r1,r1) RESTORE_REGS - addik r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */ + addik r1, r1, PT_SIZE /* MS: Clean up stack space. */ tovirt(r1,r1); 6: IRQ_return: /* MS: Make global symbol for debugging */ @@ -792,29 +799,29 @@ C_ENTRY(_debug_exception): lwi r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/ /* BIP bit is set on entry, no interrupts can occur */ - addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; + addik r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - PT_SIZE; SAVE_REGS; /* save all regs to pt_reg structure */ - swi r0, r1, PTO+PT_R0; /* R0 must be saved too */ - swi r14, r1, PTO+PT_R14 /* rewrite saved R14 value */ - swi r16, r1, PTO+PT_PC; /* PC and r16 are the same */ + swi r0, r1, PT_R0; /* R0 must be saved too */ + swi r14, r1, PT_R14 /* rewrite saved R14 value */ + swi r16, r1, PT_PC; /* PC and r16 are the same */ /* save special purpose registers to pt_regs */ mfs r11, rear; - swi r11, r1, PTO+PT_EAR; + swi r11, r1, PT_EAR; mfs r11, resr; - swi r11, r1, PTO+PT_ESR; + swi r11, r1, PT_ESR; mfs r11, rfsr; - swi r11, r1, PTO+PT_FSR; + swi r11, r1, PT_FSR; /* stack pointer is in physical address at it is decrease - * by STATE_SAVE_SIZE but we need to get correct R1 value */ - addik r11, r1, CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR + STATE_SAVE_SIZE; - swi r11, r1, PTO+PT_R1 + * by PT_SIZE but we need to get correct R1 value */ + addik r11, r1, CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR + PT_SIZE; + swi r11, r1, PT_R1 /* MS: r31 - current pointer isn't changed */ tovirt(r1,r1) #ifdef CONFIG_KGDB - addi r5, r1, PTO /* pass pt_reg address as the first arg */ - la r15, r0, dbtrap_call; /* return address */ + addi r5, r1, 0 /* pass pt_reg address as the first arg */ + addik r15, r0, dbtrap_call; /* return address */ rtbd r0, microblaze_kgdb_break nop; #endif @@ -829,16 +836,16 @@ C_ENTRY(_debug_exception): addik r1, r1, THREAD_SIZE; /* calculate kernel stack pointer */ tophys(r1,r1); - addik r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */ + addik r1, r1, -PT_SIZE; /* Make room on the stack. */ SAVE_REGS; - swi r16, r1, PTO+PT_PC; /* Save LP */ - swi r0, r1, PTO + PT_MODE; /* Was in user-mode. */ + swi r16, r1, PT_PC; /* Save LP */ + swi r0, r1, PT_MODE; /* Was in user-mode. */ lwi r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); - swi r11, r1, PTO+PT_R1; /* Store user SP. */ + swi r11, r1, PT_R1; /* Store user SP. */ lwi CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); tovirt(r1,r1) set_vms; - addik r5, r1, PTO; + addik r5, r1, 0; addik r15, r0, dbtrap_call; dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */ rtbd r0, sw_exception @@ -846,7 +853,7 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */ /* MS: The first instruction for the second part of the gdb/kgdb */ set_bip; /* Ints masked for state restore */ - lwi r11, r1, PTO + PT_MODE; + lwi r11, r1, PT_MODE; bnei r11, 2f; /* MS: Return to user space - gdb */ /* Get current task ptr into r11 */ @@ -865,7 +872,7 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */ andi r11, r11, _TIF_SIGPENDING; beqi r11, 1f; /* Signals to handle, handle them */ - addik r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ + addik r5, r1, 0; /* Arg 1: struct pt_regs *regs */ addi r7, r0, 0; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ add r6, r0, r0; /* Arg 2: sigset_t *oldset */ @@ -876,7 +883,7 @@ dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */ tophys(r1,r1); /* MS: Restore all regs */ RESTORE_REGS - addik r1, r1, STATE_SAVE_SIZE /* Clean up stack space */ + addik r1, r1, PT_SIZE /* Clean up stack space */ lwi r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer */ DBTRAP_return_user: /* MS: Make global symbol for debugging */ rtbd r16, 0; /* MS: Instructions to return from a debug trap */ @@ -887,9 +894,9 @@ DBTRAP_return_user: /* MS: Make global symbol for debugging */ tophys(r1,r1); /* MS: Restore all regs */ RESTORE_REGS - lwi r14, r1, PTO+PT_R14; - lwi r16, r1, PTO+PT_PC; - addik r1, r1, STATE_SAVE_SIZE; /* MS: Clean up stack space */ + lwi r14, r1, PT_R14; + lwi r16, r1, PT_PC; + addik r1, r1, PT_SIZE; /* MS: Clean up stack space */ tovirt(r1,r1); DBTRAP_return_kernel: /* MS: Make global symbol for debugging */ rtbd r16, 0; /* MS: Instructions to return from a debug trap */ @@ -981,20 +988,22 @@ ENTRY(_switch_to) nop ENTRY(_reset) - brai 0x70; /* Jump back to FS-boot */ + brai 0; /* Jump to reset vector */ /* These are compiled and loaded into high memory, then * copied into place in mach_early_setup */ .section .init.ivt, "ax" +#if CONFIG_MANUAL_RESET_VECTOR .org 0x0 - /* this is very important - here is the reset vector */ - /* in current MMU branch you don't care what is here - it is - * used from bootloader site - but this is correct for FS-BOOT */ - brai 0x70 - nop + brai CONFIG_MANUAL_RESET_VECTOR +#endif + .org 0x8 brai TOPHYS(_user_exception); /* syscall handler */ + .org 0x10 brai TOPHYS(_interrupt); /* Interrupt handler */ + .org 0x18 brai TOPHYS(_debug_exception); /* debug trap handler */ + .org 0x20 brai TOPHYS(_hw_exception_handler); /* HW exception handler */ .section .rodata,"a" diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c index a7fa6ae76d89..66fad2301221 100644 --- a/arch/microblaze/kernel/exceptions.c +++ b/arch/microblaze/kernel/exceptions.c @@ -50,7 +50,7 @@ void die(const char *str, struct pt_regs *fp, long err) } /* for user application debugging */ -void sw_exception(struct pt_regs *regs) +asmlinkage void sw_exception(struct pt_regs *regs) { _exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16); flush_dcache_range(regs->r16, regs->r16 + 0x4); diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c index 515feb404555..357d56abe24a 100644 --- a/arch/microblaze/kernel/ftrace.c +++ b/arch/microblaze/kernel/ftrace.c @@ -51,6 +51,9 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) : "r" (parent), "r" (return_hooker) ); + flush_dcache_range((u32)parent, (u32)parent + 4); + flush_icache_range((u32)parent, (u32)parent + 4); + if (unlikely(faulted)) { ftrace_graph_stop(); WARN_ON(1); @@ -95,6 +98,9 @@ static int ftrace_modify_code(unsigned long addr, unsigned int value) if (unlikely(faulted)) return -EFAULT; + flush_dcache_range(addr, addr + 4); + flush_icache_range(addr, addr + 4); + return 0; } @@ -195,8 +201,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func) ret += ftrace_modify_code((unsigned long)&ftrace_caller, MICROBLAZE_NOP); - /* All changes are done - lets do caches consistent */ - flush_icache(); return ret; } @@ -210,7 +214,6 @@ int ftrace_enable_ftrace_graph_caller(void) old_jump = *(unsigned int *)ip; /* save jump over instruction */ ret = ftrace_modify_code(ip, MICROBLAZE_NOP); - flush_icache(); pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump); return ret; @@ -222,7 +225,6 @@ int ftrace_disable_ftrace_graph_caller(void) unsigned long ip = (unsigned long)(&ftrace_call_graph); ret = ftrace_modify_code(ip, old_jump); - flush_icache(); pr_debug("%s\n", __func__); return ret; diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 778a5ce2e4fc..77320b8fc16a 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -39,7 +39,7 @@ #include <asm/mmu.h> #include <asm/processor.h> -.data +.section .data .global empty_zero_page .align 12 empty_zero_page: @@ -50,6 +50,11 @@ swapper_pg_dir: #endif /* CONFIG_MMU */ +.section .rodata +.align 4 +endian_check: + .word 1 + __HEAD ENTRY(_start) #if CONFIG_KERNEL_BASE_ADDR == 0 @@ -79,10 +84,7 @@ real_start: /* Does r7 point to a valid FDT? Load HEADER magic number */ /* Run time Big/Little endian platform */ /* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */ - addik r11, r0, 0x1 /* BIG/LITTLE checking value */ - /* __bss_start will be zeroed later - it is just temp location */ - swi r11, r0, TOPHYS(__bss_start) - lbui r11, r0, TOPHYS(__bss_start) + lbui r11, r0, TOPHYS(endian_check) beqid r11, big_endian /* DO NOT break delay stop dependency */ lw r11, r0, r7 /* Big endian load in delay slot */ lwr r11, r0, r7 /* Little endian load */ @@ -222,26 +224,26 @@ start_here: #endif /* CONFIG_MMU */ /* Initialize small data anchors */ - la r13, r0, _KERNEL_SDA_BASE_ - la r2, r0, _KERNEL_SDA2_BASE_ + addik r13, r0, _KERNEL_SDA_BASE_ + addik r2, r0, _KERNEL_SDA2_BASE_ /* Initialize stack pointer */ - la r1, r0, init_thread_union + THREAD_SIZE - 4 + addik r1, r0, init_thread_union + THREAD_SIZE - 4 /* Initialize r31 with current task address */ - la r31, r0, init_task + addik r31, r0, init_task /* * Call platform dependent initialize function. * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for * the function. */ - la r9, r0, machine_early_init + addik r9, r0, machine_early_init brald r15, r9 nop #ifndef CONFIG_MMU - la r15, r0, machine_halt + addik r15, r0, machine_halt braid start_kernel nop #else diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index 782680de3121..56572e923a83 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -77,6 +77,8 @@ #include <asm/signal.h> #include <asm/asm-offsets.h> +#undef DEBUG + /* Helpful Macros */ #define NUM_TO_REG(num) r ## num @@ -91,7 +93,7 @@ lwi r6, r1, PT_R6; \ lwi r11, r1, PT_R11; \ lwi r31, r1, PT_R31; \ - lwi r1, r0, TOPHYS(r0_ram + 0); + lwi r1, r1, PT_R1; #endif /* CONFIG_MMU */ #define LWREG_NOP \ @@ -206,8 +208,8 @@ * | . | * | . | * - * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S - * which is used for storing register values - old style was, that value were + * MMU kernel uses the same 'pt_pool_space' pointed space + * which is used for storing register values - noMMu style was, that values were * stored in stack but in case of failure you lost information about register. * Currently you can see register value in memory in specific place. * In compare to with previous solution the speed should be the same. @@ -226,8 +228,22 @@ */ /* wrappers to restore state before coming to entry.S */ - #ifdef CONFIG_MMU +.section .data +.align 4 +pt_pool_space: + .space PT_SIZE + +#ifdef DEBUG +/* Create space for exception counting. */ +.section .data +.global exception_debug_table +.align 4 +exception_debug_table: + /* Look at exception vector table. There is 32 exceptions * word size */ + .space (32 * 4) +#endif /* DEBUG */ + .section .rodata .align 4 _MB_HW_ExceptionVectorTable: @@ -287,10 +303,10 @@ _hw_exception_handler: #ifndef CONFIG_MMU addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */ #else - swi r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */ + swi r1, r0, TOPHYS(pt_pool_space + PT_R1); /* GET_SP */ /* Save date to kernel memory. Here is the problem * when you came from user space */ - ori r1, r0, TOPHYS(r0_ram + 28); + ori r1, r0, TOPHYS(pt_pool_space); #endif swi r3, r1, PT_R3 swi r4, r1, PT_R4 @@ -329,12 +345,12 @@ not_in_delay_slot: #ifdef DEBUG /* counting which exception happen */ - lwi r5, r0, 0x200 + TOPHYS(r0_ram) + lwi r5, r0, TOPHYS(exception_debug_table) addi r5, r5, 1 - swi r5, r0, 0x200 + TOPHYS(r0_ram) - lwi r5, r6, 0x200 + TOPHYS(r0_ram) + swi r5, r0, TOPHYS(exception_debug_table) + lwi r5, r6, TOPHYS(exception_debug_table) addi r5, r5, 1 - swi r5, r6, 0x200 + TOPHYS(r0_ram) + swi r5, r6, TOPHYS(exception_debug_table) #endif /* end */ /* Load the HW Exception vector */ @@ -474,7 +490,7 @@ ex_lw_tail: /* Get the destination register number into r5 */ lbui r5, r0, TOPHYS(ex_reg_op); /* Form load_word jump table offset (lw_table + (8 * regnum)) */ - la r6, r0, TOPHYS(lw_table); + addik r6, r0, TOPHYS(lw_table); addk r5, r5, r5; addk r5, r5, r5; addk r5, r5, r5; @@ -485,7 +501,7 @@ ex_sw: /* Get the destination register number into r5 */ lbui r5, r0, TOPHYS(ex_reg_op); /* Form store_word jump table offset (sw_table + (8 * regnum)) */ - la r6, r0, TOPHYS(sw_table); + addik r6, r0, TOPHYS(sw_table); add r5, r5, r5; add r5, r5, r5; add r5, r5, r5; @@ -896,7 +912,7 @@ ex_lw_vm: beqid r6, ex_lhw_vm; load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */ /* Load a word, byte-by-byte from destination address and save it in tmp space*/ - la r6, r0, ex_tmp_data_loc_0; + addik r6, r0, ex_tmp_data_loc_0; sbi r5, r6, 0; load2: lbui r5, r4, 1; sbi r5, r6, 1; @@ -910,7 +926,7 @@ load4: lbui r5, r4, 3; ex_lhw_vm: /* Load a half-word, byte-by-byte from destination address and * save it in tmp space */ - la r6, r0, ex_tmp_data_loc_0; + addik r6, r0, ex_tmp_data_loc_0; sbi r5, r6, 0; load5: lbui r5, r4, 1; sbi r5, r6, 1; @@ -926,7 +942,7 @@ ex_sw_vm: addik r5, r8, sw_table_vm; bra r5; ex_sw_tail_vm: - la r5, r0, ex_tmp_data_loc_0; + addik r5, r0, ex_tmp_data_loc_0; beqid r6, ex_shw_vm; swi r3, r5, 0; /* Get the word - delay slot */ /* Store the word, byte-by-byte into destination address */ @@ -969,7 +985,7 @@ ex_unaligned_fixup: addik r7, r0, SIGSEGV /* call bad_page_fault for finding aligned fixup, fixup address is saved * in PT_PC which is used as return address from exception */ - la r15, r0, ret_from_exc-8 /* setup return address */ + addik r15, r0, ret_from_exc-8 /* setup return address */ brid bad_page_fault nop diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index d61ea33aff7c..c88f066f41bd 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -40,59 +40,46 @@ unsigned int nr_irq; #define MER_ME (1<<0) #define MER_HIE (1<<1) -static void intc_enable_or_unmask(unsigned int irq) +static void intc_enable_or_unmask(struct irq_data *d) { - unsigned long mask = 1 << irq; - pr_debug("enable_or_unmask: %d\n", irq); + unsigned long mask = 1 << d->irq; + pr_debug("enable_or_unmask: %d\n", d->irq); out_be32(INTC_BASE + SIE, mask); /* ack level irqs because they can't be acked during * ack function since the handle_level_irq function * acks the irq before calling the interrupt handler */ - if (irq_desc[irq].status & IRQ_LEVEL) + if (irqd_is_level_type(d)) out_be32(INTC_BASE + IAR, mask); } -static void intc_disable_or_mask(unsigned int irq) +static void intc_disable_or_mask(struct irq_data *d) { - pr_debug("disable: %d\n", irq); - out_be32(INTC_BASE + CIE, 1 << irq); + pr_debug("disable: %d\n", d->irq); + out_be32(INTC_BASE + CIE, 1 << d->irq); } -static void intc_ack(unsigned int irq) +static void intc_ack(struct irq_data *d) { - pr_debug("ack: %d\n", irq); - out_be32(INTC_BASE + IAR, 1 << irq); + pr_debug("ack: %d\n", d->irq); + out_be32(INTC_BASE + IAR, 1 << d->irq); } -static void intc_mask_ack(unsigned int irq) +static void intc_mask_ack(struct irq_data *d) { - unsigned long mask = 1 << irq; - pr_debug("disable_and_ack: %d\n", irq); + unsigned long mask = 1 << d->irq; + pr_debug("disable_and_ack: %d\n", d->irq); out_be32(INTC_BASE + CIE, mask); out_be32(INTC_BASE + IAR, mask); } -static void intc_end(unsigned int irq) -{ - unsigned long mask = 1 << irq; - pr_debug("end: %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - out_be32(INTC_BASE + SIE, mask); - /* ack level sensitive intr */ - if (irq_desc[irq].status & IRQ_LEVEL) - out_be32(INTC_BASE + IAR, mask); - } -} - static struct irq_chip intc_dev = { .name = "Xilinx INTC", - .unmask = intc_enable_or_unmask, - .mask = intc_disable_or_mask, - .ack = intc_ack, - .mask_ack = intc_mask_ack, - .end = intc_end, + .irq_unmask = intc_enable_or_unmask, + .irq_mask = intc_disable_or_mask, + .irq_ack = intc_ack, + .irq_mask_ack = intc_mask_ack, }; unsigned int get_irq(struct pt_regs *regs) @@ -170,13 +157,13 @@ void __init init_IRQ(void) for (i = 0; i < nr_irq; ++i) { if (intr_type & (0x00000001 << i)) { - set_irq_chip_and_handler_name(i, &intc_dev, - handle_edge_irq, intc_dev.name); - irq_desc[i].status &= ~IRQ_LEVEL; + irq_set_chip_and_handler_name(i, &intc_dev, + handle_edge_irq, "edge"); + irq_clear_status_flags(i, IRQ_LEVEL); } else { - set_irq_chip_and_handler_name(i, &intc_dev, - handle_level_irq, intc_dev.name); - irq_desc[i].status |= IRQ_LEVEL; + irq_set_chip_and_handler_name(i, &intc_dev, + handle_level_irq, "level"); + irq_set_status_flags(i, IRQ_LEVEL); } } } diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index a9345fb4906a..ce7ac8435d5c 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -47,46 +47,6 @@ next_irq: trace_hardirqs_on(); } -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction *action; - unsigned long flags; - - if (i == 0) { - seq_printf(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%-8d", j); - seq_putc(p, '\n'); - } - - if (i < nr_irq) { - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if (!action) - goto skip; - seq_printf(p, "%3d: ", i); -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); -#endif - seq_printf(p, " %8s", irq_desc[i].status & - IRQ_LEVEL ? "level" : "edge"); - seq_printf(p, " %8s", irq_desc[i].chip->name); - seq_printf(p, " %s", action->name); - - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - - seq_putc(p, '\n'); -skip: - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } - return 0; -} - /* MS: There is no any advance mapping mechanism. We are using simple 32bit intc without any cascades or any connection that's why mapping is 1:1 */ unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq) diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index 5cb034174005..49faeb429599 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -24,6 +24,7 @@ extern char *_ebss; EXPORT_SYMBOL_GPL(_ebss); + #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); @@ -45,3 +46,14 @@ EXPORT_SYMBOL(empty_zero_page); #endif EXPORT_SYMBOL(mbc); + +extern void __divsi3(void); +EXPORT_SYMBOL(__divsi3); +extern void __modsi3(void); +EXPORT_SYMBOL(__modsi3); +extern void __mulsi3(void); +EXPORT_SYMBOL(__mulsi3); +extern void __udivsi3(void); +EXPORT_SYMBOL(__udivsi3); +extern void __umodsi3(void); +EXPORT_SYMBOL(__umodsi3); diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index ba7c4b16ed35..968648a81c1e 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -159,7 +159,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, } /* FIXME STATE_SAVE_PT_OFFSET; */ - ti->cpu_context.r1 = (unsigned long)childregs - STATE_SAVE_ARG_SPACE; + ti->cpu_context.r1 = (unsigned long)childregs; /* we should consider the fact that childregs is a copy of the parent * regs which were saved immediately after entering the kernel state * before enabling VM. This MSR will be restored in switch_to and diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index bceaa5543e39..00ee90f08343 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -59,7 +59,7 @@ static int __init early_init_dt_scan_serial(unsigned long node, { unsigned long l; char *p; - int *addr; + const __be32 *addr; pr_debug("search \"serial\", depth: %d, uname: %s\n", depth, uname); diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 9ae24f4b882b..47187cc2cf00 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -2,88 +2,11 @@ #include <linux/kernel.h> #include <linux/string.h> -#include <linux/pci_regs.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> #include <linux/of_address.h> #include <asm/prom.h> -#include <asm/pci-bridge.h> - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c index 05ac8cc975d5..6a8e0cc5c57d 100644 --- a/arch/microblaze/kernel/ptrace.c +++ b/arch/microblaze/kernel/ptrace.c @@ -39,6 +39,7 @@ #include <linux/uaccess.h> #include <asm/asm-offsets.h> #include <asm/cacheflush.h> +#include <asm/syscall.h> #include <asm/io.h> /* Returns the address where the register at REG_OFFS in P is stashed away. */ @@ -123,7 +124,7 @@ long arch_ptrace(struct task_struct *child, long request, rval = -EIO; if (rval == 0 && request == PTRACE_PEEKUSR) - rval = put_user(val, (unsigned long *)data); + rval = put_user(val, (unsigned long __user *)data); break; default: rval = ptrace_request(child, request, addr, data); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 9312fbb37efd..8e2c09b7ff26 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -95,7 +95,8 @@ inline unsigned get_romfs_len(unsigned *addr) void __init machine_early_init(const char *cmdline, unsigned int ram, unsigned int fdt, unsigned int msr) { - unsigned long *src, *dst = (unsigned long *)0x0; + unsigned long *src, *dst; + unsigned int offset = 0; /* If CONFIG_MTD_UCLINUX is defined, assume ROMFS is at the * end of kernel. There are two position which we want to check. @@ -168,7 +169,14 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, "CPU have it %x\n", msr); #endif - for (src = __ivt_start; src < __ivt_end; src++, dst++) + /* Do not copy reset vectors. offset = 0x2 means skip the first + * two instructions. dst is pointer to MB vectors which are placed + * in block ram. If you want to copy reset vector setup offset to 0x0 */ +#if !CONFIG_MANUAL_RESET_VECTOR + offset = 0x2; +#endif + dst = (unsigned long *) (offset * sizeof(u32)); + for (src = __ivt_start + offset; src < __ivt_end; src++, dst++) *dst = *src; /* Initialize global data */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index d8d3bb396cd6..599671168980 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -93,7 +93,7 @@ static int restore_sigcontext(struct pt_regs *regs, asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe __user *frame = - (struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE); + (struct rt_sigframe __user *)(regs->r1); sigset_t set; int rval; @@ -197,8 +197,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, /* Create the ucontext. */ err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user((void *)current->sas_ss_sp, + err |= __put_user(NULL, &frame->uc.uc_link); + err |= __put_user((void __user *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(regs->r1), &frame->uc.uc_stack.ss_flags); @@ -247,7 +247,7 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + regs->r1 = (unsigned long) frame; /* Signal handler args: */ regs->r5 = signal; /* arg 0: signum */ diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 2250fe9d269b..e5b154f24f85 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -40,7 +40,8 @@ asmlinkage long microblaze_vfork(struct pt_regs *regs) regs, 0, NULL, NULL); } -asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs) +asmlinkage long microblaze_clone(int flags, unsigned long stack, + struct pt_regs *regs) { if (!stack) stack = regs->r1; diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index e88a930fd1e3..85cea81d1ca1 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -375,3 +375,7 @@ ENTRY(sys_call_table) .long sys_fanotify_init .long sys_fanotify_mark .long sys_prlimit64 /* 370 */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_clock_adjtime + .long sys_syncfs diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 68ec7d1e8439..e5550ce4e0eb 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -38,8 +38,8 @@ static unsigned int timer_baseaddr; #define TIMER_BASE timer_baseaddr #endif -unsigned int freq_div_hz; -unsigned int timer_clock_freq; +static unsigned int freq_div_hz; +static unsigned int timer_clock_freq; #define TCSR0 (0x00) #define TLR0 (0x04) @@ -202,7 +202,7 @@ static struct cyclecounter microblaze_cc = { .shift = 8, }; -int __init init_microblaze_timecounter(void) +static int __init init_microblaze_timecounter(void) { microblaze_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, microblaze_cc.shift); diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c index fefac5c33586..9781a528cfc9 100644 --- a/arch/microblaze/kernel/unwind.c +++ b/arch/microblaze/kernel/unwind.c @@ -183,7 +183,7 @@ static inline void unwind_trap(struct task_struct *task, unsigned long pc, * @trace : Where to store stack backtrace (PC values). * NULL == print backtrace to kernel log */ -void microblaze_unwind_inner(struct task_struct *task, +static void microblaze_unwind_inner(struct task_struct *task, unsigned long pc, unsigned long fp, unsigned long leaf_return, struct stack_trace *trace) diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 3451bdec9f05..ac0e1a5d4782 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -70,11 +70,6 @@ SECTIONS { RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) _edata = . ; - /* Reserve some low RAM for r0 based memory references */ - . = ALIGN(0x4) ; - r0_ram = . ; - . = . + PAGE_SIZE; /* a page should be enough */ - /* Under the microblaze ABI, .sdata and .sbss must be contiguous */ . = ALIGN(8); .sdata : AT(ADDR(.sdata) - LOAD_OFFSET) { diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index f1fcbff3da25..10c320aa908b 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -2,6 +2,12 @@ # Makefile # +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_ashldi3.o = -pg +CFLAGS_REMOVE_ashrdi3.o = -pg +CFLAGS_REMOVE_lshrdi3.o = -pg +endif + lib-y := memset.o ifeq ($(CONFIG_OPT_LIB_ASM),y) diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c index cc495d7d99cc..52746e718dfa 100644 --- a/arch/microblaze/lib/memcpy.c +++ b/arch/microblaze/lib/memcpy.c @@ -63,8 +63,8 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) if (likely(c >= 4)) { unsigned value, buf_hold; - /* Align the dstination to a word boundry. */ - /* This is done in an endian independant manner. */ + /* Align the destination to a word boundary. */ + /* This is done in an endian independent manner. */ switch ((unsigned long)dst & 3) { case 1: *dst++ = *src++; @@ -80,7 +80,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) i_dst = (void *)dst; /* Choose a copy scheme based on the source */ - /* alignment relative to dstination. */ + /* alignment relative to destination. */ switch ((unsigned long)src & 3) { case 0x0: /* Both byte offsets are aligned */ i_src = (const void *)src; @@ -173,7 +173,7 @@ void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c) } /* Finish off any remaining bytes */ - /* simple fast copy, ... unless a cache boundry is crossed */ + /* simple fast copy, ... unless a cache boundary is crossed */ switch (c) { case 3: *dst++ = *src++; diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c index 810fd68775e3..2146c3752a80 100644 --- a/arch/microblaze/lib/memmove.c +++ b/arch/microblaze/lib/memmove.c @@ -83,8 +83,8 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) if (c >= 4) { unsigned value, buf_hold; - /* Align the destination to a word boundry. */ - /* This is done in an endian independant manner. */ + /* Align the destination to a word boundary. */ + /* This is done in an endian independent manner. */ switch ((unsigned long)dst & 3) { case 3: @@ -193,7 +193,7 @@ void *memmove(void *v_dst, const void *v_src, __kernel_size_t c) dst = (void *)i_dst; } - /* simple fast copy, ... unless a cache boundry is crossed */ + /* simple fast copy, ... unless a cache boundary is crossed */ /* Finish off any remaining bytes */ switch (c) { case 4: diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c index 834565d1607e..ddf67939576d 100644 --- a/arch/microblaze/lib/memset.c +++ b/arch/microblaze/lib/memset.c @@ -64,7 +64,7 @@ void *memset(void *v_src, int c, __kernel_size_t n) if (likely(n >= 4)) { /* Align the destination to a word boundary */ - /* This is done in an endian independant manner */ + /* This is done in an endian independent manner */ switch ((unsigned) src & 3) { case 1: *src++ = c; diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c index d4860e154d29..0585bccb7fad 100644 --- a/arch/microblaze/lib/muldi3.c +++ b/arch/microblaze/lib/muldi3.c @@ -58,3 +58,4 @@ DWtype __muldi3(DWtype u, DWtype v) return w.ll; } +EXPORT_SYMBOL(__muldi3); diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c index 5a59dad62bd2..a1e2e18e0961 100644 --- a/arch/microblaze/mm/consistent.c +++ b/arch/microblaze/mm/consistent.c @@ -59,7 +59,7 @@ * uncached region. This will no doubt cause big problems if memory allocated * here is not also freed properly. -- JW */ -void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle) +void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) { unsigned long order, vaddr; void *ret; diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c index 57bd2a09610c..ae97d2ccdc22 100644 --- a/arch/microblaze/mm/fault.c +++ b/arch/microblaze/mm/fault.c @@ -48,7 +48,7 @@ static int store_updates_sp(struct pt_regs *regs) { unsigned int inst; - if (get_user(inst, (unsigned int *)regs->pc)) + if (get_user(inst, (unsigned int __user *)regs->pc)) return 0; /* check for 1 in the rD field */ if (((inst >> 21) & 0x1f) != 1) diff --git a/arch/microblaze/pci/indirect_pci.c b/arch/microblaze/pci/indirect_pci.c index 25f18f017f21..4196eb6bd764 100644 --- a/arch/microblaze/pci/indirect_pci.c +++ b/arch/microblaze/pci/indirect_pci.c @@ -108,7 +108,7 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | (devfn << 8) | reg | cfg_type)); - /* surpress setting of PCI_PRIMARY_BUS */ + /* suppress setting of PCI_PRIMARY_BUS */ if (hose->indirect_type & INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) if ((offset == PCI_PRIMARY_BUS) && (bus->number == hose->first_busno)) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index e363615d6798..53599067d2f9 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -29,6 +29,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_pci.h> #include <asm/processor.h> #include <asm/io.h> @@ -236,7 +237,7 @@ int pci_read_irq_line(struct pci_dev *pci_dev) virq = irq_create_mapping(NULL, line); if (virq != NO_IRQ) - set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); } else { pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n", oirq.size, oirq.specifier[0], oirq.specifier[1], diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c index 3c3d808d7ce0..92728a6cfd80 100644 --- a/arch/microblaze/pci/pci_32.c +++ b/arch/microblaze/pci/pci_32.c @@ -332,6 +332,7 @@ static void __devinit pcibios_scan_phb(struct pci_controller *hose) hose->global_number); return; } + bus.dev->of_node = of_node_get(node); bus->secondary = hose->first_busno; hose->bus = bus; diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto index 5d86fc19029d..25a6f019e94d 100644 --- a/arch/microblaze/platform/generic/Kconfig.auto +++ b/arch/microblaze/platform/generic/Kconfig.auto @@ -29,7 +29,7 @@ config KERNEL_BASE_ADDR BASE Address for kernel config XILINX_MICROBLAZE0_FAMILY - string "Targetted FPGA family" + string "Targeted FPGA family" default "virtex5" config XILINX_MICROBLAZE0_USE_MSR_INSTR |