Merge commit 'v3.3-rc1' into fbdev-next

9 files changed, 894 insertions, 270 deletions

diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 811ece7b22e3..407ebc00e661 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -6,9 +6,7 @@
 #
 
 obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
-	sleeper.o dma.o dbdma.o
-
-obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+	sleeper.o dma.o dbdma.o vss.o irq.o
 
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 0e63ee487d6d..cf02d7dc2df0 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -148,6 +148,50 @@ static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
 	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 };
 
+static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
+	{ AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8,  0x10100004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8,  0x10100000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8,  0x10101004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8,  0x10101000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8,  0x10102004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN,  0, 8,  0x10102000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8,  0x10103004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8,  0x10103000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8,  0x10600000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8,  0x10600004, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8,  0x10601000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  8, 8,  0x10601004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN ,   4, 32, 0x10300008, 0, 0 },
+	{ AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT,   4, 32, 0x10300004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,   0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,   0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,   0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0301c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,   0, 16, 0x10a0301c, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE,   0, 0,  0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8,  0x10602000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN,  4, 8,  0x10602004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE,  0, 32, 0x14001810, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
 /* 32 predefined plus 32 custom */
 #define DBDEV_TAB_SIZE		64
 
@@ -1019,8 +1063,7 @@ static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
 	dbdma_gptr->ddma_inten = 0xffff;
 	au_sync();
 
-	ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma",
-			  (void *)dbdma_gptr);
+	ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
 	if (ret)
 		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
 	else {
@@ -1038,6 +1081,8 @@ static int __init alchemy_dbdma_init(void)
 		return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
 	case ALCHEMY_CPU_AU1200:
 		return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+	case ALCHEMY_CPU_AU1300:
+		return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
 	}
 	return 0;
 }
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
index 91fb4d9e30fd..f1b50f0c01db 100644
--- a/arch/mips/alchemy/common/gpiolib.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -27,6 +27,7 @@
  *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ *	Au1300 is totally different: 1 block with up to 128 GPIOs
  */
 
 #include <linux/init.h>
@@ -35,6 +36,7 @@
 #include <linux/types.h>
 #include <linux/gpio.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -115,6 +117,43 @@ struct gpio_chip alchemy_gpio_chip[] = {
 	},
 };
 
+static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+}
+
+static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+{
+	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_direction_input(off + AU1300_GPIO_BASE);
+}
+
+static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off,
+				   int v)
+{
+	return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_to_irq(off + AU1300_GPIO_BASE);
+}
+
+static struct gpio_chip au1300_gpiochip = {
+	.label			= "alchemy-gpic",
+	.direction_input	= alchemy_gpic_dir_input,
+	.direction_output	= alchemy_gpic_dir_output,
+	.get			= alchemy_gpic_get,
+	.set			= alchemy_gpic_set,
+	.to_irq			= alchemy_gpic_gpio_to_irq,
+	.base			= AU1300_GPIO_BASE,
+	.ngpio			= AU1300_GPIO_NUM,
+};
+
 static int __init alchemy_gpiochip_init(void)
 {
 	int ret = 0;
@@ -127,6 +166,9 @@ static int __init alchemy_gpiochip_init(void)
 		ret = gpiochip_add(&alchemy_gpio_chip[0]);
 		ret |= gpiochip_add(&alchemy_gpio_chip[1]);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = gpiochip_add(&au1300_gpiochip);
+		break;
 	}
 	return ret;
 }
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 8b60ba0675e2..94fbcd19eb9c 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -25,19 +25,15 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/bitops.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/syscore_ops.h>
 
 #include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
 #include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_MIPS_PB1000
-#include <asm/mach-pb1x00/pb1000.h>
-#endif
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 /* Interrupt Controller register offsets */
 #define IC_CFG0RD	0x40
@@ -69,7 +65,17 @@
 #define IC_FALLINGCLR	0x7C
 #define IC_TESTBIT	0x80
 
-static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
+/* per-processor fixed function irqs */
+struct alchemy_irqmap {
+	int irq;	/* linux IRQ number */
+	int type;	/* IRQ_TYPE_ */
+	int prio;	/* irq priority, 0 highest, 3 lowest */
+	int internal;	/* GPIC: internal source (no ext. pin)? */
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int type);
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
+
 
 /* NOTE on interrupt priorities: The original writers of this code said:
  *
@@ -77,176 +83,207 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
  * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
  * needs the highest priority.
  */
-
-/* per-processor fixed function irqs */
-struct au1xxx_irqmap {
-	int im_irq;
-	int im_type;
-	int im_request;		/* set 1 to get higher priority */
+struct alchemy_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
 };
 
-struct au1xxx_irqmap au1000_irqmap[] __initdata = {
-	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1500_irqmap[] __initdata = {
-	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1100_irqmap[] __initdata = {
-	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1550_irqmap[] __initdata = {
-	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+struct alchemy_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1200_irqmap[] __initdata = {
-	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ -1, },
+static struct alchemy_irqmap au1300_irqmap[] __initdata = {
+	/* multifunction: gpio pin or device */
+	{ AU1300_UART1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_NAND_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	/* au1300 internal */
+	{ AU1300_DDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MMU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_GPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_UDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_TOY_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	0, 1, },
+	{ AU1300_UART0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_SD0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_USB_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_LCD_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_BSA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPE_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_ITE_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_AES_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_CIM_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ -1, },	/* terminator */
 };
 
+/******************************************************************************/
 
 static void au1x_ic0_unmask(struct irq_data *d)
 {
@@ -265,14 +302,6 @@ static void au1x_ic1_unmask(struct irq_data *d)
 
 	__raw_writel(1 << bit, base + IC_MASKSET);
 	__raw_writel(1 << bit, base + IC_WAKESET);
-
-/* very hacky. does the pb1000 cpld auto-disable this int?
- * nowhere in the current kernel sources is it disabled.	--mlau
- */
-#if defined(CONFIG_MIPS_PB1000)
-	if (d->irq == AU1000_GPIO15_INT)
-		__raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
-#endif
 	wmb();
 }
 
@@ -470,40 +499,219 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
 	return ret;
 }
 
-asmlinkage void plat_irq_dispatch(void)
+/******************************************************************************/
+
+/*
+ * au1300_gpic_chgcfg - change PIN configuration.
+ * @gpio:	pin to change (0-based GPIO number from datasheet).
+ * @clr:	clear all bits set in 'clr'.
+ * @set:	set these bits.
+ *
+ * modifies a pins' configuration register, bits set in @clr will
+ * be cleared in the register, bits in @set will be set.
+ */
+static inline void au1300_gpic_chgcfg(unsigned int gpio,
+				      unsigned long clr,
+				      unsigned long set)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long l;
+
+	r += gpio * 4;	/* offset into pin config array */
+	l = __raw_readl(r + AU1300_GPIC_PINCFG);
+	l &= ~clr;
+	l |= set;
+	__raw_writel(l, r + AU1300_GPIC_PINCFG);
+	wmb();
+}
+
+/*
+ * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to the GPIO controller, so its level can either
+ * be read or set through the generic GPIO functions.
+ * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
+ * REVISIT: is this function really necessary?
+ */
+void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
+{
+	au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
+
+/*
+ * au1300_pinfunc_to_dev - assign a pin to the device function.
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to its associated device function; the pin will be
+ * driven by the device and not through GPIO functions.
+ */
+void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	r += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
+	wmb();
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
+
+/*
+ * au1300_set_irq_priority -  set internal priority of IRQ.
+ * @irq:	irq to set priority (linux irq number).
+ * @p:		priority (0 = highest, 3 = lowest).
+ */
+void au1300_set_irq_priority(unsigned int irq, int p)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
-	unsigned long s, off;
-
-	if (pending & CAUSEF_IP7) {
-		off = MIPS_CPU_IRQ_BASE + 7;
-		goto handle;
-	} else if (pending & CAUSEF_IP2) {
-		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
-		off = AU1000_INTC0_INT_BASE;
-	} else if (pending & CAUSEF_IP3) {
-		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
-		off = AU1000_INTC0_INT_BASE;
-	} else if (pending & CAUSEF_IP4) {
-		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
-		off = AU1000_INTC1_INT_BASE;
-	} else if (pending & CAUSEF_IP5) {
-		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
-		off = AU1000_INTC1_INT_BASE;
-	} else
-		goto spurious;
-
-	s = __raw_readl((void __iomem *)s);
-	if (unlikely(!s)) {
-spurious:
-		spurious_interrupt();
-		return;
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
+}
+EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
+
+/*
+ * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
+ * @dchan:	dbdma trigger select (0, 1).
+ * @gpio:	pin to assign as trigger.
+ *
+ * DBDMA controller has 2 external trigger sources; this function
+ * assigns a GPIO to the selected trigger.
+ */
+void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
+{
+	unsigned long r;
+
+	if ((dchan >= 0) && (dchan <= 1)) {
+		r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		r &= ~(0xff << (8 * dchan));
+		r |= (gpio & 0x7f) << (8 * dchan);
+		__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		wmb();
 	}
-	off += __ffs(s);
-handle:
-	do_IRQ(off);
 }
 
+static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
+{
+	au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
+			   allow ? GPIC_CFG_IDLEWAKE : 0);
+}
+
+static void au1300_gpic_mask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_unmask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+
+	gpic_pin_set_idlewake(irq, 1);
+
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IEN);
+	wmb();
+}
+
+static void au1300_gpic_maskack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);	/* mask */
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_ack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	wmb();
+}
+
+static struct irq_chip au1300_gpic = {
+	.name		= "GPIOINT",
+	.irq_ack	= au1300_gpic_ack,
+	.irq_mask	= au1300_gpic_mask,
+	.irq_mask_ack	= au1300_gpic_maskack,
+	.irq_unmask	= au1300_gpic_unmask,
+	.irq_set_type	= au1300_gpic_settype,
+};
+
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned long s;
+	unsigned char *name = NULL;
+	irq_flow_handler_t hdl = NULL;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		s = GPIC_CFG_IC_LEVEL_HIGH;
+		name = "high";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		s = GPIC_CFG_IC_LEVEL_LOW;
+		name = "low";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		s = GPIC_CFG_IC_EDGE_RISE;
+		name = "posedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		s = GPIC_CFG_IC_EDGE_FALL;
+		name = "negedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		s = GPIC_CFG_IC_EDGE_BOTH;
+		name = "bothedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_NONE:
+		s = GPIC_CFG_IC_OFF;
+		name = "disabled";
+		hdl = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	__irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name);
+
+	au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
+
+	return 0;
+}
+
+/******************************************************************************/
 
 static inline void ic_init(void __iomem *base)
 {
@@ -521,13 +729,159 @@ static inline void ic_init(void __iomem *base)
 	wmb();
 }
 
-static void __init au1000_init_irq(struct au1xxx_irqmap *map)
+static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
+
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+	d[0] = __raw_readl(base + IC_CFG0RD);
+	d[1] = __raw_readl(base + IC_CFG1RD);
+	d[2] = __raw_readl(base + IC_CFG2RD);
+	d[3] = __raw_readl(base + IC_SRCRD);
+	d[4] = __raw_readl(base + IC_ASSIGNRD);
+	d[5] = __raw_readl(base + IC_WAKERD);
+	d[6] = __raw_readl(base + IC_MASKRD);
+	ic_init(base);		/* shut it up too while at it */
+}
+
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
+{
+	ic_init(base);
+
+	__raw_writel(d[0], base + IC_CFG0SET);
+	__raw_writel(d[1], base + IC_CFG1SET);
+	__raw_writel(d[2], base + IC_CFG2SET);
+	__raw_writel(d[3], base + IC_SRCSET);
+	__raw_writel(d[4], base + IC_ASSIGNSET);
+	__raw_writel(d[5], base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(d[6], base + IC_MASKSET);
+	wmb();
+}
+
+static int alchemy_ic_suspend(void)
+{
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			       alchemy_gpic_pmdata);
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			       &alchemy_gpic_pmdata[7]);
+	return 0;
+}
+
+static void alchemy_ic_resume(void)
+{
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			      &alchemy_gpic_pmdata[7]);
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			      alchemy_gpic_pmdata);
+}
+
+static int alchemy_gpic_suspend(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* save 4 interrupt mask status registers */
+	alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
+	alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
+	alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
+	alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
+
+	/* save misc register(s) */
+	alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
+
+	/* molto silenzioso */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* save pin/int-type configuration */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
+
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_gpic_resume(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* disable all first */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* restore pin/int-type configurations */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
+	wmb();
+
+	/* restore misc register(s) */
+	base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
+	wmb();
+
+	/* finally restore masks */
+	__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
+	__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
+	__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
+	__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
+	wmb();
+}
+
+static struct syscore_ops alchemy_ic_pmops = {
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static struct syscore_ops alchemy_gpic_pmops = {
+	.suspend	= alchemy_gpic_suspend,
+	.resume		= alchemy_gpic_resume,
+};
+
+/******************************************************************************/
+
+/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
+#define DISP(name, base, addr)						      \
+static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d)    \
+{									      \
+	unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));	      \
+	if (likely(r))							      \
+		generic_handle_irq(base + __ffs(r));			      \
+	else								      \
+		spurious_interrupt();					      \
+}
+
+DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
+DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
+DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
+DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
+
+static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d)
+{
+	int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
+	generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
+}
+
+/******************************************************************************/
+
+static void __init au1000_init_irq(struct alchemy_irqmap *map)
 {
 	unsigned int bit, irq_nr;
 	void __iomem *base;
 
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
+	register_syscore_ops(&alchemy_ic_pmops);
 	mips_cpu_irq_init();
 
 	/* register all 64 possible IC0+IC1 irq sources as type "none".
@@ -544,8 +898,8 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 	/*
 	 * Initialize IC0, which is fixed per processor.
 	 */
-	while (map->im_irq != -1) {
-		irq_nr = map->im_irq;
+	while (map->irq != -1) {
+		irq_nr = map->irq;
 
 		if (irq_nr >= AU1000_INTC1_INT_BASE) {
 			bit = irq_nr - AU1000_INTC1_INT_BASE;
@@ -554,16 +908,61 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 			bit = irq_nr - AU1000_INTC0_INT_BASE;
 			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 		}
-		if (map->im_request)
+		if (map->prio == 0)
 			__raw_writel(1 << bit, base + IC_ASSIGNSET);
 
-		au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
+		au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
 		++map;
 	}
 
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
+}
+
+static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
+{
+	int i;
+	void __iomem *bank_base;
+
+	register_syscore_ops(&alchemy_gpic_pmops);
+	mips_cpu_irq_init();
+
+	/* disable & ack all possible interrupt sources */
+	for (i = 0; i < 4; i++) {
+		bank_base = AU1300_GPIC_ADDR + (i * 4);
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
+		wmb();
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
+		wmb();
+	}
+
+	/* register an irq_chip for them, with 2nd highest priority */
+	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
+		au1300_set_irq_priority(i, 1);
+		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	}
+
+	/* setup known on-chip sources */
+	while ((i = dints->irq) != -1) {
+		au1300_gpic_settype(irq_get_irq_data(i), dints->type);
+		au1300_set_irq_priority(i, dints->prio);
+
+		if (dints->internal)
+			au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
+
+		dints++;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
 }
 
+/******************************************************************************/
+
 void __init arch_init_irq(void)
 {
 	switch (alchemy_get_cputype()) {
@@ -582,65 +981,17 @@ void __init arch_init_irq(void)
 	case ALCHEMY_CPU_AU1200:
 		au1000_init_irq(au1200_irqmap);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_gpic_init_irq(au1300_irqmap);
+		break;
+	default:
+		pr_err("unknown Alchemy IRQ core\n");
+		break;
 	}
 }
 
-
-static unsigned long alchemy_ic_pmdata[7 * 2];
-
-static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
-{
-	d[0] = __raw_readl(base + IC_CFG0RD);
-	d[1] = __raw_readl(base + IC_CFG1RD);
-	d[2] = __raw_readl(base + IC_CFG2RD);
-	d[3] = __raw_readl(base + IC_SRCRD);
-	d[4] = __raw_readl(base + IC_ASSIGNRD);
-	d[5] = __raw_readl(base + IC_WAKERD);
-	d[6] = __raw_readl(base + IC_MASKRD);
-	ic_init(base);		/* shut it up too while at it */
-}
-
-static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
-{
-	ic_init(base);
-
-	__raw_writel(d[0], base + IC_CFG0SET);
-	__raw_writel(d[1], base + IC_CFG1SET);
-	__raw_writel(d[2], base + IC_CFG2SET);
-	__raw_writel(d[3], base + IC_SRCSET);
-	__raw_writel(d[4], base + IC_ASSIGNSET);
-	__raw_writel(d[5], base + IC_WAKESET);
-	wmb();
-
-	__raw_writel(d[6], base + IC_MASKSET);
-	wmb();
-}
-
-static int alchemy_ic_suspend(void)
-{
-	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
-			       alchemy_ic_pmdata);
-	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
-			       &alchemy_ic_pmdata[7]);
-	return 0;
-}
-
-static void alchemy_ic_resume(void)
-{
-	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
-			      &alchemy_ic_pmdata[7]);
-	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
-			      alchemy_ic_pmdata);
-}
-
-static struct syscore_ops alchemy_ic_syscore_ops = {
-	.suspend	= alchemy_ic_suspend,
-	.resume		= alchemy_ic_resume,
-};
-
-static int __init alchemy_ic_pm_init(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	register_syscore_ops(&alchemy_ic_syscore_ops);
-	return 0;
+	unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
+	do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
 }
-device_initcall(alchemy_ic_pm_init);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index c8e5d72a5826..95cb9113b12c 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -82,6 +82,12 @@ static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
 		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
 		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
 	},
+	[ALCHEMY_CPU_AU1300] = {
+		PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+		PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+		PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+		PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+	},
 };
 
 static struct platform_device au1xx0_uart_device = {
@@ -122,10 +128,12 @@ static unsigned long alchemy_ohci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
 };
 
 static unsigned long alchemy_ehci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
 };
 
 static int __init _new_usbres(struct resource **r, struct platform_device **d)
@@ -169,8 +177,8 @@ static void __init alchemy_setup_usb(int ctype)
 		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
 
 
-	/* setup EHCI0: Au1200 */
-	if (ctype == ALCHEMY_CPU_AU1200) {
+	/* setup EHCI0: Au1200/Au1300 */
+	if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
 		if (_new_usbres(&res, &pdev))
 			return;
 
@@ -187,6 +195,25 @@ static void __init alchemy_setup_usb(int ctype)
 		if (platform_device_register(pdev))
 			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
 	}
+
+	/* Au1300: OHCI1 */
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = AU1300_USB_INT;
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "au1xxx-ohci";
+		pdev->id = 1;
+		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+	}
 }
 
 /* Macro to help defining the Ethernet MAC resources */
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index bdd6651e9a4f..0c7fce2a3c12 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -126,6 +126,9 @@ void au_sleep(void)
 	case ALCHEMY_CPU_AU1200:
 		alchemy_sleep_au1550();
 		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_sleep_au1300();
+		break;
 	}
 
 	restore_core_regs();
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 77f3c743b716..c7bcc7e5c822 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -153,6 +153,79 @@ LEAF(alchemy_sleep_au1550)
 
 END(alchemy_sleep_au1550)
 
+/* sleepcode for Au1300 memory controller type */
+LEAF(alchemy_sleep_au1300)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 2f
+	la	t1, 4f
+	subu	t2, t1, t0
+
+	.set	mips3
+
+1:	cache	0x14, 0(t0)
+	subu	t2, t2, 32
+	bgez	t2, 1b
+	 addu	t0, t0, 32
+
+	.set	mips0
+
+2:	lui	a0, 0xb400		/* mem_xxx */
+
+	/* disable all ports in mem_sdportcfga */
+	sw	zero, 0x868(a0)		/* mem_sdportcfga */
+	sync
+
+	/* disable ODT */
+	li	t0, 0x03010000
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sync
+
+	/* precharge */
+	li	t0, 0x23000400
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* auto refresh */
+	sw	zero, 0x08c8(a0)	/* mem_sdautoref */
+	sync
+
+	/* block access to the DDR */
+	lw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	li	t1, (1 << 7 | 0x3F)
+	or	t0, t0, t1
+	sw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	sync
+
+	/* issue the Self Refresh command */
+	li	t0, 0x10000000
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0300
+3:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	bne	t2, t0, 3b
+	 nop
+
+	/* disable SDRAM clocks */
+	li	t0, ~(3<<28)
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t1, t0		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+4:
+
+END(alchemy_sleep_au1300)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index d5da6adbf634..7da4d0081487 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -92,7 +92,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 
 static struct irqaction au1x_rtcmatch2_irqaction = {
 	.handler	= au1x_rtcmatch2_irq,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.name		= "timer",
 	.dev_id		= &au1x_rtcmatch2_clockdev,
 };
@@ -178,6 +178,7 @@ static int alchemy_m2inttab[] __initdata = {
 	AU1100_RTC_MATCH2_INT,
 	AU1550_RTC_MATCH2_INT,
 	AU1200_RTC_MATCH2_INT,
+	AU1300_RTC_MATCH2_INT,
 };
 
 void __init plat_time_init(void)
diff --git a/arch/mips/alchemy/common/vss.c b/arch/mips/alchemy/common/vss.c
new file mode 100644
index 000000000000..d23b1444d365
--- /dev/null
+++ b/arch/mips/alchemy/common/vss.c
@@ -0,0 +1,84 @@
+/*
+ * Au1300 media block power gating (VSS)
+ *
+ * This is a stop-gap solution until I have the clock framework integration
+ * ready. This stuff here really must be handled transparently when clocks
+ * for various media blocks are enabled/disabled.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define VSS_GATE	0x00	/* gate wait timers */
+#define VSS_CLKRST	0x04	/* clock/block control */
+#define VSS_FTR		0x08	/* footers */
+
+#define VSS_ADDR(blk)	(KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c))
+
+static DEFINE_SPINLOCK(au1300_vss_lock);
+
+/* enable a block as outlined in the databook */
+static inline void __enable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(3, base + VSS_CLKRST);	/* enable clock, assert reset */
+	wmb();
+
+	__raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */
+	wmb();
+
+	/* enable footers in sequence */
+	__raw_writel(0x01, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x03, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x07, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x0f, base + VSS_FTR);
+	wmb();
+
+	__raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */
+	wmb();
+
+	__raw_writel(2, base + VSS_CLKRST);	/* deassert reset */
+	wmb();
+
+	__raw_writel(0x1f, base + VSS_FTR);	/* enable isolation cells */
+	wmb();
+}
+
+/* disable a block as outlined in the databook */
+static inline void __disable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(0x0f, base + VSS_FTR);	/* disable isolation cells */
+	wmb();
+	__raw_writel(0, base + VSS_GATE);	/* disable FSM */
+	wmb();
+	__raw_writel(3, base + VSS_CLKRST);	/* assert reset */
+	wmb();
+	__raw_writel(1, base + VSS_CLKRST);	/* disable clock */
+	wmb();
+	__raw_writel(0, base + VSS_FTR);	/* disable all footers */
+	wmb();
+}
+
+void au1300_vss_block_control(int block, int enable)
+{
+	unsigned long flags;
+
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300)
+		return;
+
+	/* only one block at a time */
+	spin_lock_irqsave(&au1300_vss_lock, flags);
+	if (enable)
+		__enable_block(block);
+	else
+		__disable_block(block);
+	spin_unlock_irqrestore(&au1300_vss_lock, flags);
+}
+EXPORT_SYMBOL_GPL(au1300_vss_block_control);