diff options
author | Manuel Lauss <manuel.lauss@googlemail.com> | 2011-08-12 11:39:44 +0200 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2011-10-25 00:34:24 +0200 |
commit | 7517de348663b08a808aff44b5300e817157a568 (patch) | |
tree | b70b0bdbb30f2ef796c4ca319ad922e7686ca51c /arch/mips/alchemy | |
parent | MIPS: Alchemy: more base address cleanup (diff) | |
download | linux-7517de348663b08a808aff44b5300e817157a568.tar.xz linux-7517de348663b08a808aff44b5300e817157a568.zip |
MIPS: Alchemy: Redo PCI as platform driver
- Rewrite Alchemy PCI support as a platform driver.
- Fixup boards which have PCI.
Run-tested on DB1500 and DB1550.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
delete mode 100644 arch/mips/alchemy/common/pci.c
delete mode 100644 arch/mips/pci/fixup-au1000.c
delete mode 100644 arch/mips/pci/ops-au1000.c
create mode 100644 arch/mips/pci/pci-alchemy.c
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r-- | arch/mips/alchemy/common/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/alchemy/common/pci.c | 104 | ||||
-rw-r--r-- | arch/mips/alchemy/common/setup.c | 6 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1x00/board_setup.c | 24 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/db1x00/platform.c | 123 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1500/board_setup.c | 33 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1500/platform.c | 48 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1550/board_setup.c | 6 | ||||
-rw-r--r-- | arch/mips/alchemy/devboards/pb1550/platform.c | 48 | ||||
-rw-r--r-- | arch/mips/alchemy/gpr/board_setup.c | 12 | ||||
-rw-r--r-- | arch/mips/alchemy/gpr/platform.c | 47 | ||||
-rw-r--r-- | arch/mips/alchemy/mtx-1/board_setup.c | 40 | ||||
-rw-r--r-- | arch/mips/alchemy/mtx-1/platform.c | 62 | ||||
-rw-r--r-- | arch/mips/alchemy/xxs1500/board_setup.c | 8 |
14 files changed, 340 insertions, 223 deletions
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index 62f0d39e93cd..811ece7b22e3 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -14,5 +14,3 @@ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) obj-$(CONFIG_GPIOLIB) += gpiolib.o endif - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c deleted file mode 100644 index 7866cf50cf99..000000000000 --- a/arch/mips/alchemy/common/pci.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Alchemy/AMD Au1x00 PCI support. - * - * Copyright 2001-2003, 2007-2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * Support for all devices (greater than 16) added by David Gathright. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/mach-au1x00/au1000.h> - -/* TBD */ -static struct resource pci_io_resource = { - .start = PCI_IO_START, - .end = PCI_IO_END, - .name = "PCI IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PCI_MEM_START, - .end = PCI_MEM_END, - .name = "PCI memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops au1x_pci_ops; - -static struct pci_controller au1x_controller = { - .pci_ops = &au1x_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) -static unsigned long virt_io_addr; -#endif - -static int __init au1x_pci_setup(void) -{ - extern void au1x_pci_cfg_init(void); - -#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) - virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, - Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); - - if (!virt_io_addr) { - printk(KERN_ERR "Unable to ioremap pci space\n"); - return 1; - } - au1x_controller.io_map_base = virt_io_addr; - -#ifdef CONFIG_DMA_NONCOHERENT - { - /* - * Set the NC bit in controller for Au1500 pre-AC silicon - */ - u32 prid = read_c0_prid(); - - if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) { - au_writel((1 << 16) | au_readl(Au1500_PCI_CFG), - Au1500_PCI_CFG); - printk(KERN_INFO "Non-coherent PCI accesses enabled\n"); - } - } -#endif - - set_io_port_base(virt_io_addr); -#endif - - au1x_pci_cfg_init(); - - register_pci_controller(&au1x_controller); - return 0; -} - -arch_initcall(au1x_pci_setup); diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 1b887c868417..37ffd997c616 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -73,8 +73,8 @@ void __init plat_mem_setup(void) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { - u32 start = (u32)Au1500_PCI_MEM_START; - u32 end = (u32)Au1500_PCI_MEM_END; + unsigned long start = ALCHEMY_PCI_MEMWIN_START; + unsigned long end = ALCHEMY_PCI_MEMWIN_END; /* Don't fixup 36-bit addresses */ if ((phys_addr >> 32) != 0) @@ -82,7 +82,7 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) /* Check for PCI memory window */ if (phys_addr >= start && (phys_addr + size - 1) <= end) - return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START); + return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr); /* default nop */ return phys_addr; diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 5c956fe8760f..2b2178f3f30b 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -40,24 +40,6 @@ #include <prom.h> -#ifdef CONFIG_MIPS_DB1500 -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - -#endif - - -#ifdef CONFIG_MIPS_DB1550 -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - - #ifdef CONFIG_MIPS_BOSPORUS char irq_tab_alchemy[][5] __initdata = { [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ @@ -91,12 +73,6 @@ const char *get_system_type(void) #ifdef CONFIG_MIPS_MIRAGE -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */ - [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */ -}; - static void mirage_power_off(void) { alchemy_gpio_direction_output(210, 1); diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c index ef8017f23cdc..9030108928a4 100644 --- a/arch/mips/alchemy/devboards/db1x00/platform.c +++ b/arch/mips/alchemy/devboards/db1x00/platform.c @@ -25,6 +25,8 @@ #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +struct pci_dev; + /* DB1xxx PCMCIA interrupt sources: * CD0/1 GPIO0/3 * STSCHG0/1 GPIO1/4 @@ -85,6 +87,127 @@ #endif #endif +#ifdef CONFIG_PCI +#ifdef CONFIG_MIPS_DB1500 +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_DB1550 +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1550_PCI_INTC : 0xff; + if (slot == 12) { + switch (pin) { + case 1: return AU1550_PCI_INTB; + case 2: return AU1550_PCI_INTC; + case 3: return AU1550_PCI_INTD; + case 4: return AU1550_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1550_PCI_INTA; + case 2: return AU1550_PCI_INTB; + case 3: return AU1550_PCI_INTC; + case 4: return AU1550_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 11) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + default: return 0xff; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} +#endif + +#ifdef CONFIG_MIPS_MIRAGE +static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 11) || (slot > 13) || pin == 0) + return -1; + if (slot == 11) + return (pin == 1) ? AU1500_PCI_INTD : 0xff; + if (slot == 12) + return (pin == 3) ? AU1500_PCI_INTC : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + default: return 0xff; + } + } + return -1; +} +#endif + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata db1xxx_pci_pd = { + .board_map_irq = db1xxx_map_pci_irq, +}; + +static struct platform_device db1xxx_pci_host_dev = { + .dev.platform_data = &db1xxx_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + +static int __init db15x0_pci_init(void) +{ + return platform_device_register(&db1xxx_pci_host_dev); +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(db15x0_pci_init); +#endif + static int __init db1xxx_dev_init(void) { #ifdef DB1XXX_HAS_PCMCIA diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 3b4fa3206969..37c1883b5ea9 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -33,13 +33,6 @@ #include <prom.h> - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ - [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1500"; @@ -101,20 +94,18 @@ void __init board_setup(void) #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ #ifdef CONFIG_PCI - /* Setup PCI bus controller */ - au_writel(0, Au1500_PCI_CMEM); - au_writel(0x00003fff, Au1500_CFG_BASE); -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); - au_writel(0, Au1500_PCI_MWBASE_REV_CCL); - au_writel(0x02a00356, Au1500_PCI_STATCMD); - au_writel(0x00003c04, Au1500_PCI_HDRTYPE); - au_writel(0x00000008, Au1500_PCI_MBAR); - au_sync(); + { + void __iomem *base = + (void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR); + /* Setup PCI bus controller */ + __raw_writel(0x00003fff, base + PCI_REG_CMEM); + __raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV); + __raw_writel(0, base + PCI_REG_MWBASE_REV_CCL); + __raw_writel(0x02a00356, base + PCI_REG_STATCMD); + __raw_writel(0x00003c04, base + PCI_REG_PARAM); + __raw_writel(0x00000008, base + PCI_REG_MBAR); + wmb(); + } #endif /* Enable sys bus clock divider when IDLE state or no bus activity. */ diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c index 42b0e6b8cd58..9f0b5a0b4795 100644 --- a/arch/mips/alchemy/devboards/pb1500/platform.c +++ b/arch/mips/alchemy/devboards/pb1500/platform.c @@ -19,11 +19,56 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) + return (pin == 1) ? AU1500_PCI_INTA : 0xff; + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1500_pci_pd = { + .board_map_irq = pb1500_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device pb1500_pci_host = { + .dev.platform_data = &pb1500_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static int __init pb1500_dev_init(void) { int swapped; @@ -41,7 +86,8 @@ static int __init pb1500_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1500_pci_host); return 0; } -device_initcall(pb1500_dev_init); +arch_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index b790213848bd..0f62d1e3df24 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -37,12 +37,6 @@ #include <prom.h> - -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; - const char *get_system_type(void) { return "Alchemy Pb1550"; diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c index 87c79b7f3123..0c5711fa0734 100644 --- a/arch/mips/alchemy/devboards/pb1550/platform.c +++ b/arch/mips/alchemy/devboards/pb1550/platform.c @@ -19,13 +19,56 @@ */ #include <linux/init.h> - +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1550.h> #include <asm/mach-db1x00/bcsr.h> #include "../platform.h" +static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot < 12) || (slot > 13) || pin == 0) + return -1; + if (slot == 12) { + switch (pin) { + case 1: return AU1500_PCI_INTB; + case 2: return AU1500_PCI_INTC; + case 3: return AU1500_PCI_INTD; + case 4: return AU1500_PCI_INTA; + } + } + if (slot == 13) { + switch (pin) { + case 1: return AU1500_PCI_INTA; + case 2: return AU1500_PCI_INTB; + case 3: return AU1500_PCI_INTC; + case 4: return AU1500_PCI_INTD; + } + } + return -1; +} + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct alchemy_pci_platdata pb1550_pci_pd = { + .board_map_irq = pb1550_map_pci_irq, +}; + +static struct platform_device pb1550_pci_host = { + .dev.platform_data = &pb1550_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static int __init pb1550_dev_init(void) { int swapped; @@ -57,7 +100,8 @@ static int __init pb1550_dev_init(void) swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; db1x_register_norflash(128 * 1024 * 1024, 4, swapped); + platform_device_register(&pb1550_pci_host); return 0; } -device_initcall(pb1550_dev_init); +arch_initcall(pb1550_dev_init); diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c index 5f8f0691ed2d..dea45c78fdcd 100644 --- a/arch/mips/alchemy/gpr/board_setup.c +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -36,10 +36,6 @@ #include <prom.h> -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, -}; - static void gpr_reset(char *c) { /* switch System-LED to orange (red# and green# on) */ @@ -76,12 +72,4 @@ void __init board_setup(void) /* Take away Reset of UMTS-card */ alchemy_gpio_direction_output(215, 1); - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif } diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c index 14b46629cfc8..982ce85db60d 100644 --- a/arch/mips/alchemy/gpr/platform.c +++ b/arch/mips/alchemy/gpr/platform.c @@ -167,6 +167,45 @@ static struct i2c_board_info gpr_i2c_info[] __initdata = { } }; + + +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + if ((slot == 0) && (pin == 1)) + return AU1550_PCI_INTA; + else if ((slot == 0) && (pin == 2)) + return AU1550_PCI_INTB; + + return -1; +} + +static struct alchemy_pci_platdata gpr_pci_pd = { + .board_map_irq = gpr_map_pci_irq, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device gpr_pci_host_dev = { + .dev.platform_data = &gpr_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + static struct platform_device *gpr_devices[] __initdata = { &gpr_wdt_device, &gpr_mtd_device, @@ -174,6 +213,14 @@ static struct platform_device *gpr_devices[] __initdata = { &gpr_led_devices, }; +static int __init gpr_pci_init(void) +{ + return platform_device_register(&gpr_pci_host_dev); +} +/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ +arch_initcall(gpr_pci_init); + + static int __init gpr_dev_init(void) { i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info)); diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 3ae984cf98cf..851a5ab4c8f2 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -38,20 +38,6 @@ #include <prom.h> -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; - -extern int (*board_pci_idsel)(unsigned int devsel, int assert); -int mtx1_pci_idsel(unsigned int devsel, int assert); - static void mtx1_reset(char *c) { /* Jump to the reset vector */ @@ -74,15 +60,6 @@ void __init board_setup(void) alchemy_gpio_direction_output(204, 0); #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif - board_pci_idsel = mtx1_pci_idsel; -#endif - /* Initialize sys_pinfunc */ au_writel(SYS_PF_NI2, SYS_PINFUNC); @@ -104,23 +81,6 @@ void __init board_setup(void) printk(KERN_INFO "4G Systems MTX-1 Board\n"); } -int -mtx1_pci_idsel(unsigned int devsel, int assert) -{ - /* This function is only necessary to support a proprietary Cardbus - * adapter on the mtx-1 "singleboard" variant. It triggers a custom - * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. - */ - if (assert && devsel != 0) - /* Suppress signal to Cardbus */ - alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ - else - alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ - - udelay(1); - return 1; -} - static int __init mtx1_init_irq(void) { irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 55628e390fd7..cc47b6868ca3 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -135,7 +135,69 @@ static struct platform_device mtx1_mtd = { .resource = &mtx1_mtd_resource, }; +static struct resource alchemy_pci_host_res[] = { + [0] = { + .start = AU1500_PCI_PHYS_ADDR, + .end = AU1500_PCI_PHYS_ADDR + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static int mtx1_pci_idsel(unsigned int devsel, int assert) +{ + /* This function is only necessary to support a proprietary Cardbus + * adapter on the mtx-1 "singleboard" variant. It triggers a custom + * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. + */ + if (assert && devsel != 0) + /* Suppress signal to Cardbus */ + alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ + else + alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ + + udelay(1); + return 1; +} + +static const char mtx1_irqtab[][5] = { + [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + +static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) +{ + return mtx1_irqtab[slot][pin]; +} + +static struct alchemy_pci_platdata mtx1_pci_pd = { + .board_map_irq = mtx1_map_pci_irq, + .board_pci_idsel = mtx1_pci_idsel, + .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H | + PCI_CONFIG_CH | +#if defined(__MIPSEB__) + PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM, +#else + 0, +#endif +}; + +static struct platform_device mtx1_pci_host = { + .dev.platform_data = &mtx1_pci_pd, + .name = "alchemy-pci", + .id = 0, + .num_resources = ARRAY_SIZE(alchemy_pci_host_res), + .resource = alchemy_pci_host_res, +}; + + static struct __initdata platform_device * mtx1_devs[] = { + &mtx1_pci_host, &mtx1_gpio_leds, &mtx1_wdt, &mtx1_button, diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 81e57fad07ab..3fa83f72e014 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -70,14 +70,6 @@ void __init board_setup(void) /* Enable DTR (MCR bit 0) = USB power up */ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); wmb(); - -#ifdef CONFIG_PCI -#if defined(__MIPSEB__) - au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); -#else - au_writel(0xf, Au1500_PCI_CFG); -#endif -#endif } static int __init xxs1500_init_irq(void) |