Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/mips/ath79/mach-db120.c b/arch/mips/ath79/mach-db120.c
new file mode 100644
index 000000000000..1983e4d2af4b
--- /dev/null
+++ b/arch/mips/ath79/mach-db120.c
@@ -0,0 +1,134 @@
+/*
+ * Atheros DB120 reference board support
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "pci.h"
+
+#define DB120_GPIO_LED_WLAN_5G		12
+#define DB120_GPIO_LED_WLAN_2G		13
+#define DB120_GPIO_LED_STATUS		14
+#define DB120_GPIO_LED_WPS		15
+
+#define DB120_GPIO_BTN_WPS		16
+
+#define DB120_KEYS_POLL_INTERVAL	20	/* msecs */
+#define DB120_KEYS_DEBOUNCE_INTERVAL	(3 * DB120_KEYS_POLL_INTERVAL)
+
+#define DB120_WMAC_CALDATA_OFFSET 0x1000
+#define DB120_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led db120_leds_gpio[] __initdata = {
+	{
+		.name		= "db120:green:status",
+		.gpio		= DB120_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "db120:green:wps",
+		.gpio		= DB120_GPIO_LED_WPS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "db120:green:wlan-5g",
+		.gpio		= DB120_GPIO_LED_WLAN_5G,
+		.active_low	= 1,
+	},
+	{
+		.name		= "db120:green:wlan-2g",
+		.gpio		= DB120_GPIO_LED_WLAN_2G,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= DB120_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+};
+
+static struct spi_board_info db120_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "s25sl064a",
+	}
+};
+
+static struct ath79_spi_platform_data db120_spi_data = {
+	.bus_num	= 0,
+	.num_chipselect	= 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data db120_ath9k_data;
+
+static int db120_pci_plat_dev_init(struct pci_dev *dev)
+{
+	switch (PCI_SLOT(dev->devfn)) {
+	case 0:
+		dev->dev.platform_data = &db120_ath9k_data;
+		break;
+	}
+
+	return 0;
+}
+
+static void __init db120_pci_init(u8 *eeprom)
+{
+	memcpy(db120_ath9k_data.eeprom_data, eeprom,
+	       sizeof(db120_ath9k_data.eeprom_data));
+
+	ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+	ath79_register_pci();
+}
+#else
+static inline void db120_pci_init(void) {}
+#endif /* CONFIG_PCI */
+
+static void __init db120_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+				 db120_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(db120_gpio_keys),
+					db120_gpio_keys);
+	ath79_register_spi(&db120_spi_data, db120_spi_info,
+			   ARRAY_SIZE(db120_spi_info));
+	ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+	db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+	     db120_setup);