Merge branch 'linus' into WIP.x86/boot, to fix up conflicts and to pick up updates

 Conflicts:
	arch/x86/xen/setup.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

16 files changed, 630 insertions, 86 deletions

diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 2a5926578841..7c02e542959a 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -18,3 +18,4 @@ obj-y += crypto/
 obj-$(CONFIG_MTD)		      += flash_setup.o
 obj-$(CONFIG_SMP)		      += smp.o
 obj-$(CONFIG_OCTEON_ILM)	      += oct_ilm.o
+obj-$(CONFIG_USB)		      += octeon-usb.o
diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.c b/arch/mips/cavium-octeon/crypto/octeon-crypto.c
index f66bd1adc7ff..4d22365844af 100644
--- a/arch/mips/cavium-octeon/crypto/octeon-crypto.c
+++ b/arch/mips/cavium-octeon/crypto/octeon-crypto.c
@@ -7,7 +7,7 @@
  */
 
 #include <asm/cop2.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 
 #include "octeon-crypto.h"
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index fd69528b24fb..c64bd87f0b6e 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -164,19 +164,14 @@ static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-#ifdef CONFIG_ZONE_DMA
-	if (dev == NULL)
+	if (IS_ENABLED(CONFIG_ZONE_DMA) && dev == NULL)
 		gfp |= __GFP_DMA;
-	else if (dev->coherent_dma_mask <= DMA_BIT_MASK(24))
+	else if (IS_ENABLED(CONFIG_ZONE_DMA) &&
+		 dev->coherent_dma_mask <= DMA_BIT_MASK(24))
 		gfp |= __GFP_DMA;
-	else
-#endif
-#ifdef CONFIG_ZONE_DMA32
-	     if (dev->coherent_dma_mask <= DMA_BIT_MASK(32))
+	else if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
+		 dev->coherent_dma_mask <= DMA_BIT_MASK(32))
 		gfp |= __GFP_DMA32;
-	else
-#endif
-		;
 
 	/* Don't invoke OOM killer */
 	gfp |= __GFP_NORETRY;
@@ -205,7 +200,7 @@ static phys_addr_t octeon_unity_dma_to_phys(struct device *dev, dma_addr_t daddr
 }
 
 struct octeon_dma_map_ops {
-	struct dma_map_ops dma_map_ops;
+	const struct dma_map_ops dma_map_ops;
 	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
 	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
 };
@@ -333,7 +328,7 @@ static struct octeon_dma_map_ops _octeon_pci_dma_map_ops = {
 	},
 };
 
-struct dma_map_ops *octeon_pci_dma_map_ops;
+const struct dma_map_ops *octeon_pci_dma_map_ops;
 
 void __init octeon_pci_dma_init(void)
 {
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index b65a6c1ac016..8d54d774933c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -30,8 +30,8 @@
  * application start time.
  */
 
+#include <linux/export.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-spinlock.h>
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c
index 868659e64d4a..4b26fedecf46 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c
@@ -33,7 +33,7 @@
  * these functions directly.
  *
  */
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/octeon/octeon.h>
 
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index 671ab1db2727..ba4753c23b03 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -287,8 +287,7 @@ cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 54375340afe8..578283350776 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -500,8 +500,7 @@ cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
index 1f3030c72d88..ef16aa00167b 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -188,8 +188,7 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index d347fe13b666..19d54e02c185 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -295,8 +295,7 @@ cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index 6456af642471..f24be0b5db50 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -69,10 +69,6 @@ void (*cvmx_override_ipd_port_setup) (int ipd_port);
 /* Port count per interface */
 static int interface_port_count[5];
 
-/* Port last configured link info index by IPD/PKO port */
-static cvmx_helper_link_info_t
-    port_link_info[CVMX_PIP_NUM_INPUT_PORTS];
-
 /**
  * Return the number of interfaces the chip has. Each interface
  * may have multiple ports. Most chips support two interfaces,
@@ -1136,41 +1132,6 @@ int cvmx_helper_initialize_packet_io_local(void)
 }
 
 /**
- * Auto configure an IPD/PKO port link state and speed. This
- * function basically does the equivalent of:
- * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
- *
- * @ipd_port: IPD/PKO port to auto configure
- *
- * Returns Link state after configure
- */
-cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port)
-{
-	cvmx_helper_link_info_t link_info;
-	int interface = cvmx_helper_get_interface_num(ipd_port);
-	int index = cvmx_helper_get_interface_index_num(ipd_port);
-
-	if (index >= cvmx_helper_ports_on_interface(interface)) {
-		link_info.u64 = 0;
-		return link_info;
-	}
-
-	link_info = cvmx_helper_link_get(ipd_port);
-	if (link_info.u64 == port_link_info[ipd_port].u64)
-		return link_info;
-
-	/* If we fail to set the link speed, port_link_info will not change */
-	cvmx_helper_link_set(ipd_port, link_info);
-
-	/*
-	 * port_link_info should be the current value, which will be
-	 * different than expect if cvmx_helper_link_set() failed.
-	 */
-	return port_link_info[ipd_port];
-}
-EXPORT_SYMBOL_GPL(cvmx_helper_link_autoconf);
-
-/**
  * Return the link state of an IPD/PKO port as returned by
  * auto negotiation. The result of this function may not match
  * Octeon's link config if auto negotiation has changed since
@@ -1233,8 +1194,7 @@ EXPORT_SYMBOL_GPL(cvmx_helper_link_get);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
@@ -1276,11 +1236,6 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
 	case CVMX_HELPER_INTERFACE_MODE_LOOP:
 		break;
 	}
-	/* Set the port_link_info here so that the link status is updated
-	   no matter how cvmx_helper_link_set is called. We don't change
-	   the value if link_set failed */
-	if (result == 0)
-		port_link_info[ipd_port].u64 = link_info.u64;
 	return result;
 }
 EXPORT_SYMBOL_GPL(cvmx_helper_link_set);
diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
index cc1b1d2a6fa1..30ecba134e09 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
@@ -29,7 +29,7 @@
  * This module provides system/board/application information obtained
  * by the bootloader.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-sysinfo.h>
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 64e08df51d65..cfd97f6448bb 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -15,6 +15,7 @@
 
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/export.h>
 #include <asm/regdef.h>
 
 #define dst a0
@@ -142,6 +143,7 @@
  * t7 is used as a flag to note inatomic mode.
  */
 LEAF(__copy_user_inatomic)
+EXPORT_SYMBOL(__copy_user_inatomic)
 	b	__copy_user_common
 	 li	t7, 1
 	END(__copy_user_inatomic)
@@ -154,9 +156,11 @@ LEAF(__copy_user_inatomic)
  */
 	.align	5
 LEAF(memcpy)					/* a0=dst a1=src a2=len */
+EXPORT_SYMBOL(memcpy)
 	move	v0, dst				/* return value */
 __memcpy:
 FEXPORT(__copy_user)
+EXPORT_SYMBOL(__copy_user)
 	li	t7, 0				/* not inatomic */
 __copy_user_common:
 	/*
@@ -208,18 +212,18 @@ EXC(	STORE	t2, UNIT(6)(dst),	s_exc_p10u)
 	ADD	src, src, 16*NBYTES
 EXC(	STORE	t3, UNIT(7)(dst),	s_exc_p9u)
 	ADD	dst, dst, 16*NBYTES
-EXC(	LOAD	t0, UNIT(-8)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(-7)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(-6)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(-5)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(-8)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t1, UNIT(-7)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t2, UNIT(-6)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t3, UNIT(-5)(src),	l_exc_copy_rewind16)
 EXC(	STORE	t0, UNIT(-8)(dst),	s_exc_p8u)
 EXC(	STORE	t1, UNIT(-7)(dst),	s_exc_p7u)
 EXC(	STORE	t2, UNIT(-6)(dst),	s_exc_p6u)
 EXC(	STORE	t3, UNIT(-5)(dst),	s_exc_p5u)
-EXC(	LOAD	t0, UNIT(-4)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(-3)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(-2)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(-1)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(-4)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t1, UNIT(-3)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t2, UNIT(-2)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t3, UNIT(-1)(src),	l_exc_copy_rewind16)
 EXC(	STORE	t0, UNIT(-4)(dst),	s_exc_p4u)
 EXC(	STORE	t1, UNIT(-3)(dst),	s_exc_p3u)
 EXC(	STORE	t2, UNIT(-2)(dst),	s_exc_p2u)
@@ -383,6 +387,10 @@ done:
 	 nop
 	END(memcpy)
 
+l_exc_copy_rewind16:
+	/* Rewind src and dst by 16*NBYTES for l_exc_copy */
+	SUB	src, src, 16*NBYTES
+	SUB	dst, dst, 16*NBYTES
 l_exc_copy:
 	/*
 	 * Copy bytes from src until faulting load address (or until a
@@ -459,6 +467,7 @@ s_exc:
 
 	.align	5
 LEAF(memmove)
+EXPORT_SYMBOL(memmove)
 	ADD	t0, a0, a2
 	ADD	t1, a1, a2
 	sltu	t0, a1, t0			# dst + len <= src -> memcpy
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 37a932d9148c..3375e61daa19 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -448,6 +448,7 @@ static struct of_device_id __initdata octeon_ids[] = {
 	{ .compatible = "cavium,octeon-3860-bootbus", },
 	{ .compatible = "cavium,mdio-mux", },
 	{ .compatible = "gpio-leds", },
+	{ .compatible = "cavium,octeon-7130-usb-uctl", },
 	{},
 };
 
@@ -1060,7 +1061,3 @@ static int __init octeon_publish_devices(void)
 	return of_platform_bus_probe(NULL, octeon_ids, NULL);
 }
 arch_initcall(octeon_publish_devices);
-
-MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Platform driver for Octeon SOC");
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
new file mode 100644
index 000000000000..542be1cd0f32
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -0,0 +1,552 @@
+/*
+ * XHCI HCD glue for Cavium Octeon III SOCs.
+ *
+ * Copyright (C) 2010-2017 Cavium Networks
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/of_platform.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-gpio-defs.h>
+
+/* USB Control Register */
+union cvm_usbdrd_uctl_ctl {
+	uint64_t u64;
+	struct cvm_usbdrd_uctl_ctl_s {
+	/* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */
+	__BITFIELD_FIELD(uint64_t clear_bist:1,
+	/* 1 = Start BIST and cleared by hardware */
+	__BITFIELD_FIELD(uint64_t start_bist:1,
+	/* Reference clock select for SuperSpeed and HighSpeed PLLs:
+	 *	0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock
+	 *	0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock
+	 *	0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock &
+	 *	      HighSpeed PLL uses PLL_REF_CLK for reference clck
+	 *	0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock &
+	 *	      HighSpeed PLL uses PLL_REF_CLK for reference clck
+	 */
+	__BITFIELD_FIELD(uint64_t ref_clk_sel:2,
+	/* 1 = Spread-spectrum clock enable, 0 = SS clock disable */
+	__BITFIELD_FIELD(uint64_t ssc_en:1,
+	/* Spread-spectrum clock modulation range:
+	 *	0x0 = -4980 ppm downspread
+	 *	0x1 = -4492 ppm downspread
+	 *	0x2 = -4003 ppm downspread
+	 *	0x3 - 0x7 = Reserved
+	 */
+	__BITFIELD_FIELD(uint64_t ssc_range:3,
+	/* Enable non-standard oscillator frequencies:
+	 *	[55:53] = modules -1
+	 *	[52:47] = 2's complement push amount, 0 = Feature disabled
+	 */
+	__BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9,
+	/* Reference clock multiplier for non-standard frequencies:
+	 *	0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
+	 *	0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
+	 *	0x32 =  50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
+	 *	Other Values = Reserved
+	 */
+	__BITFIELD_FIELD(uint64_t mpll_multiplier:7,
+	/* Enable reference clock to prescaler for SuperSpeed functionality.
+	 * Should always be set to "1"
+	 */
+	__BITFIELD_FIELD(uint64_t ref_ssp_en:1,
+	/* Divide the reference clock by 2 before entering the
+	 * REF_CLK_FSEL divider:
+	 *	If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal
+	 *	If REF_CLK_SEL = 0x2 or 0x3, then:
+	 *		0x1 = DLMC_REF_CLK* is 125MHz
+	 *		0x0 = DLMC_REF_CLK* is another supported frequency
+	 */
+	__BITFIELD_FIELD(uint64_t ref_clk_div2:1,
+	/* Select reference clock freqnuency for both PLL blocks:
+	 *	0x27 = REF_CLK_SEL is 0x0 or 0x1
+	 *	0x07 = REF_CLK_SEL is 0x2 or 0x3
+	 */
+	__BITFIELD_FIELD(uint64_t ref_clk_fsel:6,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_31_31:1,
+	/* Controller clock enable. */
+	__BITFIELD_FIELD(uint64_t h_clk_en:1,
+	/* Select bypass input to controller clock divider:
+	 *	0x0 = Use divided coprocessor clock from H_CLKDIV
+	 *	0x1 = Use clock from GPIO pins
+	 */
+	__BITFIELD_FIELD(uint64_t h_clk_byp_sel:1,
+	/* Reset controller clock divider. */
+	__BITFIELD_FIELD(uint64_t h_clkdiv_rst:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_27_27:1,
+	/* Clock divider select:
+	 *	0x0 = divide by 1
+	 *	0x1 = divide by 2
+	 *	0x2 = divide by 4
+	 *	0x3 = divide by 6
+	 *	0x4 = divide by 8
+	 *	0x5 = divide by 16
+	 *	0x6 = divide by 24
+	 *	0x7 = divide by 32
+	 */
+	__BITFIELD_FIELD(uint64_t h_clkdiv_sel:3,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_22_23:2,
+	/* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1,
+	/* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_19_19:1,
+	/* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t usb3_port_disable:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_17_17:1,
+	/* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t usb2_port_disable:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_15_15:1,
+	/* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t ss_power_en:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_13_13:1,
+	/* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t hs_power_en:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_5_11:7,
+	/* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */
+	__BITFIELD_FIELD(uint64_t csclk_en:1,
+	/* Controller mode: 0x0 = Host, 0x1 = Device */
+	__BITFIELD_FIELD(uint64_t drd_mode:1,
+	/* PHY reset */
+	__BITFIELD_FIELD(uint64_t uphy_rst:1,
+	/* Software reset UAHC */
+	__BITFIELD_FIELD(uint64_t uahc_rst:1,
+	/* Software resets UCTL */
+	__BITFIELD_FIELD(uint64_t uctl_rst:1,
+	;)))))))))))))))))))))))))))))))))
+	} s;
+};
+
+/* UAHC Configuration Register */
+union cvm_usbdrd_uctl_host_cfg {
+	uint64_t u64;
+	struct cvm_usbdrd_uctl_host_cfg_s {
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_60_63:4,
+	/* Indicates minimum value of all received BELT values */
+	__BITFIELD_FIELD(uint64_t host_current_belt:12,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_38_47:10,
+	/* HS jitter adjustment */
+	__BITFIELD_FIELD(uint64_t fla:6,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_29_31:3,
+	/* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */
+	__BITFIELD_FIELD(uint64_t bme:1,
+	/* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */
+	__BITFIELD_FIELD(uint64_t oci_en:1,
+	/* Overcurrent sene selection:
+	 *	0x0 = Overcurrent indication from off-chip is active-low
+	 *	0x1 = Overcurrent indication from off-chip is active-high
+	 */
+	__BITFIELD_FIELD(uint64_t oci_active_high_en:1,
+	/* Port power control enable: 0x0 = unavailable, 0x1 = available */
+	__BITFIELD_FIELD(uint64_t ppc_en:1,
+	/* Port power control sense selection:
+	 *	0x0 = Port power to off-chip is active-low
+	 *	0x1 = Port power to off-chip is active-high
+	 */
+	__BITFIELD_FIELD(uint64_t ppc_active_high_en:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_0_23:24,
+	;)))))))))))
+	} s;
+};
+
+/* UCTL Shim Features Register */
+union cvm_usbdrd_uctl_shim_cfg {
+	uint64_t u64;
+	struct cvm_usbdrd_uctl_shim_cfg_s {
+	/* Out-of-bound UAHC register access: 0 = read, 1 = write */
+	__BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_60_62:3,
+	/* SRCID error log for out-of-bound UAHC register access:
+	 *	[59:58] = chipID
+	 *	[57] = Request source: 0 = core, 1 = NCB-device
+	 *	[56:51] = Core/NCB-device number, [56] always 0 for NCB devices
+	 *	[50:48] = SubID
+	 */
+	__BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc:12,
+	/* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */
+	__BITFIELD_FIELD(uint64_t xm_bad_dma_wrn:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_44_46:3,
+	/* Encoded error type for bad UAHC DMA */
+	__BITFIELD_FIELD(uint64_t xm_bad_dma_type:4,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_13_39:27,
+	/* Select the IOI read command used by DMA accesses */
+	__BITFIELD_FIELD(uint64_t dma_read_cmd:1,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_10_11:2,
+	/* Select endian format for DMA accesses to the L2c:
+	 *	0x0 = Little endian
+	 *`	0x1 = Big endian
+	 *	0x2 = Reserved
+	 *	0x3 = Reserved
+	 */
+	__BITFIELD_FIELD(uint64_t dma_endian_mode:2,
+	/* Reserved */
+	__BITFIELD_FIELD(uint64_t reserved_2_7:6,
+	/* Select endian format for IOI CSR access to UAHC:
+	 *	0x0 = Little endian
+	 *`	0x1 = Big endian
+	 *	0x2 = Reserved
+	 *	0x3 = Reserved
+	 */
+	__BITFIELD_FIELD(uint64_t csr_endian_mode:2,
+	;))))))))))))
+	} s;
+};
+
+#define OCTEON_H_CLKDIV_SEL		8
+#define OCTEON_MIN_H_CLK_RATE		150000000
+#define OCTEON_MAX_H_CLK_RATE		300000000
+
+static DEFINE_MUTEX(dwc3_octeon_clocks_mutex);
+static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
+
+
+static int dwc3_octeon_config_power(struct device *dev, u64 base)
+{
+#define UCTL_HOST_CFG	0xe0
+	union cvm_usbdrd_uctl_host_cfg uctl_host_cfg;
+	union cvmx_gpio_bit_cfgx gpio_bit;
+	uint32_t gpio_pwr[3];
+	int gpio, len, power_active_low;
+	struct device_node *node = dev->of_node;
+	int index = (base >> 24) & 1;
+
+	if (of_find_property(node, "power", &len) != NULL) {
+		if (len == 12) {
+			of_property_read_u32_array(node, "power", gpio_pwr, 3);
+			power_active_low = gpio_pwr[2] & 0x01;
+			gpio = gpio_pwr[1];
+		} else if (len == 8) {
+			of_property_read_u32_array(node, "power", gpio_pwr, 2);
+			power_active_low = 0;
+			gpio = gpio_pwr[1];
+		} else {
+			dev_err(dev, "dwc3 controller clock init failure.\n");
+			return -EINVAL;
+		}
+		if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
+		    OCTEON_IS_MODEL(OCTEON_CNF75XX))
+		    && gpio <= 31) {
+			gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio));
+			gpio_bit.s.tx_oe = 1;
+			gpio_bit.cn73xx.output_sel = (index == 0 ? 0x14 : 0x15);
+			cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64);
+		} else if (gpio <= 15) {
+			gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio));
+			gpio_bit.s.tx_oe = 1;
+			gpio_bit.cn70xx.output_sel = (index == 0 ? 0x14 : 0x19);
+			cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64);
+		} else {
+			gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio));
+			gpio_bit.s.tx_oe = 1;
+			gpio_bit.cn70xx.output_sel = (index == 0 ? 0x14 : 0x19);
+			cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64);
+		}
+
+		/* Enable XHCI power control and set if active high or low. */
+		uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
+		uctl_host_cfg.s.ppc_en = 1;
+		uctl_host_cfg.s.ppc_active_high_en = !power_active_low;
+		cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
+	} else {
+		/* Disable XHCI power control and set if active high. */
+		uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
+		uctl_host_cfg.s.ppc_en = 0;
+		uctl_host_cfg.s.ppc_active_high_en = 0;
+		cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
+		dev_warn(dev, "dwc3 controller clock init failure.\n");
+	}
+	return 0;
+}
+
+static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
+{
+	union cvm_usbdrd_uctl_ctl uctl_ctl;
+	int ref_clk_sel = 2;
+	u64 div;
+	u32 clock_rate;
+	int mpll_mul;
+	int i;
+	u64 h_clk_rate;
+	u64 uctl_ctl_reg = base;
+
+	if (dev->of_node) {
+		const char *ss_clock_type;
+		const char *hs_clock_type;
+
+		i = of_property_read_u32(dev->of_node,
+					 "refclk-frequency", &clock_rate);
+		if (i) {
+			pr_err("No UCTL \"refclk-frequency\"\n");
+			return -EINVAL;
+		}
+		i = of_property_read_string(dev->of_node,
+					    "refclk-type-ss", &ss_clock_type);
+		if (i) {
+			pr_err("No UCTL \"refclk-type-ss\"\n");
+			return -EINVAL;
+		}
+		i = of_property_read_string(dev->of_node,
+					    "refclk-type-hs", &hs_clock_type);
+		if (i) {
+			pr_err("No UCTL \"refclk-type-hs\"\n");
+			return -EINVAL;
+		}
+		if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
+			if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
+				ref_clk_sel = 0;
+			else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
+				ref_clk_sel = 2;
+			else
+				pr_err("Invalid HS clock type %s, using  pll_ref_clk instead\n",
+				       hs_clock_type);
+		} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
+			if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
+				ref_clk_sel = 1;
+			else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
+				ref_clk_sel = 3;
+			else {
+				pr_err("Invalid HS clock type %s, using  pll_ref_clk instead\n",
+				       hs_clock_type);
+				ref_clk_sel = 3;
+			}
+		} else
+			pr_err("Invalid SS clock type %s, using  dlmc_ref_clk0 instead\n",
+			       ss_clock_type);
+
+		if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
+				  (clock_rate != 100000000))
+			pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n",
+			       clock_rate);
+
+	} else {
+		pr_err("No USB UCTL device node\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Step 1: Wait for all voltages to be stable...that surely
+	 *         happened before starting the kernel. SKIP
+	 */
+
+	/* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */
+
+	/* Step 3: Assert all resets. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.uphy_rst = 1;
+	uctl_ctl.s.uahc_rst = 1;
+	uctl_ctl.s.uctl_rst = 1;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/* Step 4a: Reset the clock dividers. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.h_clkdiv_rst = 1;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/* Step 4b: Select controller clock frequency. */
+	for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) {
+		h_clk_rate = octeon_get_io_clock_rate() / clk_div[div];
+		if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
+				 h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
+			break;
+	}
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.h_clkdiv_sel = div;
+	uctl_ctl.s.h_clk_en = 1;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) {
+		dev_err(dev, "dwc3 controller clock init failure.\n");
+			return -EINVAL;
+	}
+
+	/* Step 4c: Deassert the controller clock divider reset. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.h_clkdiv_rst = 0;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/* Step 5a: Reference clock configuration. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.ref_clk_sel = ref_clk_sel;
+	uctl_ctl.s.ref_clk_fsel = 0x07;
+	uctl_ctl.s.ref_clk_div2 = 0;
+	switch (clock_rate) {
+	default:
+		dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
+			clock_rate);
+	case 100000000:
+		mpll_mul = 0x19;
+		if (ref_clk_sel < 2)
+			uctl_ctl.s.ref_clk_fsel = 0x27;
+		break;
+	case 50000000:
+		mpll_mul = 0x32;
+		break;
+	case 125000000:
+		mpll_mul = 0x28;
+		break;
+	}
+	uctl_ctl.s.mpll_multiplier = mpll_mul;
+
+	/* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
+	uctl_ctl.s.ssc_en = 1;
+
+	/* Step 5c: Enable SuperSpeed. */
+	uctl_ctl.s.ref_ssp_en = 1;
+
+	/* Step 5d: Cofngiure PHYs. SKIP */
+
+	/* Step 6a & 6b: Power up PHYs. */
+	uctl_ctl.s.hs_power_en = 1;
+	uctl_ctl.s.ss_power_en = 1;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/* Step 7: Wait 10 controller-clock cycles to take effect. */
+	udelay(10);
+
+	/* Step 8a: Deassert UCTL reset signal. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.uctl_rst = 0;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/* Step 8b: Wait 10 controller-clock cycles. */
+	udelay(10);
+
+	/* Steo 8c: Setup power-power control. */
+	if (dwc3_octeon_config_power(dev, base)) {
+		dev_err(dev, "Error configuring power.\n");
+		return -EINVAL;
+	}
+
+	/* Step 8d: Deassert UAHC reset signal. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.uahc_rst = 0;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/* Step 8e: Wait 10 controller-clock cycles. */
+	udelay(10);
+
+	/* Step 9: Enable conditional coprocessor clock of UCTL. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.csclk_en = 1;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	/*Step 10: Set for host mode only. */
+	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
+	uctl_ctl.s.drd_mode = 0;
+	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
+
+	return 0;
+}
+
+static void __init dwc3_octeon_set_endian_mode(u64 base)
+{
+#define UCTL_SHIM_CFG	0xe8
+	union cvm_usbdrd_uctl_shim_cfg shim_cfg;
+
+	shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG);
+#ifdef __BIG_ENDIAN
+	shim_cfg.s.dma_endian_mode = 1;
+	shim_cfg.s.csr_endian_mode = 1;
+#else
+	shim_cfg.s.dma_endian_mode = 0;
+	shim_cfg.s.csr_endian_mode = 0;
+#endif
+	cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64);
+}
+
+#define CVMX_USBDRDX_UCTL_CTL(index)				\
+		(CVMX_ADD_IO_SEG(0x0001180068000000ull) +	\
+		((index & 1) * 0x1000000ull))
+static void __init dwc3_octeon_phy_reset(u64 base)
+{
+	union cvm_usbdrd_uctl_ctl uctl_ctl;
+	int index = (base >> 24) & 1;
+
+	uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index));
+	uctl_ctl.s.uphy_rst = 0;
+	cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64);
+}
+
+static int __init dwc3_octeon_device_init(void)
+{
+	const char compat_node_name[] = "cavium,octeon-7130-usb-uctl";
+	struct platform_device *pdev;
+	struct device_node *node;
+	struct resource *res;
+	void __iomem *base;
+
+	/*
+	 * There should only be three universal controllers, "uctl"
+	 * in the device tree. Two USB and a SATA, which we ignore.
+	 */
+	node = NULL;
+	do {
+		node = of_find_node_by_name(node, "uctl");
+		if (!node)
+			return -ENODEV;
+
+		if (of_device_is_compatible(node, compat_node_name)) {
+			pdev = of_find_device_by_node(node);
+			if (!pdev)
+				return -ENODEV;
+
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+			if (res == NULL) {
+				dev_err(&pdev->dev, "No memory resources\n");
+				return -ENXIO;
+			}
+
+			/*
+			 * The code below maps in the registers necessary for
+			 * setting up the clocks and reseting PHYs. We must
+			 * release the resources so the dwc3 subsystem doesn't
+			 * know the difference.
+			 */
+			base = devm_ioremap_resource(&pdev->dev, res);
+			if (IS_ERR(base))
+				return PTR_ERR(base);
+
+			mutex_lock(&dwc3_octeon_clocks_mutex);
+			dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
+			dwc3_octeon_set_endian_mode((u64)base);
+			dwc3_octeon_phy_reset((u64)base);
+			dev_info(&pdev->dev, "clocks initialized.\n");
+			mutex_unlock(&dwc3_octeon_clocks_mutex);
+			devm_iounmap(&pdev->dev, base);
+			devm_release_mem_region(&pdev->dev, res->start,
+						resource_size(res));
+		}
+	} while (node != NULL);
+
+	return 0;
+}
+device_initcall(dwc3_octeon_device_init);
+
+MODULE_AUTHOR("David Daney <david.daney@cavium.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB driver for OCTEON III SoC");
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 9a2db1c013d9..d9dbeb0b165b 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -949,6 +949,29 @@ static __init void memory_exclude_page(u64 addr, u64 *mem, u64 *size)
 }
 #endif /* CONFIG_CRASH_DUMP */
 
+void __init fw_init_cmdline(void)
+{
+	int i;
+
+	octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3;
+	for (i = 0; i < octeon_boot_desc_ptr->argc; i++) {
+		const char *arg =
+			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
+		if (strlen(arcs_cmdline) + strlen(arg) + 1 <
+			   sizeof(arcs_cmdline) - 1) {
+			strcat(arcs_cmdline, " ");
+			strcat(arcs_cmdline, arg);
+		}
+	}
+}
+
+void __init *plat_get_fdt(void)
+{
+	octeon_bootinfo =
+		cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr);
+	return phys_to_virt(octeon_bootinfo->fdt_addr);
+}
+
 void __init plat_mem_setup(void)
 {
 	uint64_t mem_alloc_size;
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 256fe6f65cf2..4355a4cf4d74 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -11,7 +11,8 @@
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 
 #include <asm/mmu_context.h>
 #include <asm/time.h>
@@ -24,12 +25,17 @@
 volatile unsigned long octeon_processor_boot = 0xff;
 volatile unsigned long octeon_processor_sp;
 volatile unsigned long octeon_processor_gp;
+#ifdef CONFIG_RELOCATABLE
+volatile unsigned long octeon_processor_relocated_kernel_entry;
+#endif /* CONFIG_RELOCATABLE */
 
 #ifdef CONFIG_HOTPLUG_CPU
 uint64_t octeon_bootloader_entry_addr;
 EXPORT_SYMBOL(octeon_bootloader_entry_addr);
 #endif
 
+extern void kernel_entry(unsigned long arg1, ...);
+
 static void octeon_icache_flush(void)
 {
 	asm volatile ("synci 0($0)\n");
@@ -180,6 +186,19 @@ static void __init octeon_smp_setup(void)
 	octeon_smp_hotplug_setup();
 }
 
+
+#ifdef CONFIG_RELOCATABLE
+int plat_post_relocation(long offset)
+{
+	unsigned long entry = (unsigned long)kernel_entry;
+
+	/* Send secondaries into relocated kernel */
+	octeon_processor_relocated_kernel_entry = entry + offset;
+
+	return 0;
+}
+#endif /* CONFIG_RELOCATABLE */
+
 /**
  * Firmware CPU startup hook
  *
@@ -272,7 +291,6 @@ static int octeon_cpu_disable(void)
 
 	set_cpu_online(cpu, false);
 	calculate_cpu_foreign_map();
-	cpumask_clear_cpu(cpu, &cpu_callin_map);
 	octeon_fixup_irqs();
 
 	__flush_cache_all();
@@ -333,8 +351,6 @@ void play_dead(void)
 		;
 }
 
-extern void kernel_entry(unsigned long arg1, ...);
-
 static void start_after_reset(void)
 {
 	kernel_entry(0, 0, 0);	/* set a2 = 0 for secondary core */