[MIPS] DDB5477: Remove support

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

14 files changed, 0 insertions, 1672 deletions

diff --git a/arch/mips/ddb5xxx/Kconfig b/arch/mips/ddb5xxx/Kconfig
deleted file mode 100644
index e9b5de49f4c2..000000000000
--- a/arch/mips/ddb5xxx/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config DDB5477_BUS_FREQUENCY
-	int "bus frequency (in kHZ, 0 for auto-detect)"
-	depends on DDB5477
-	default 0
diff --git a/arch/mips/ddb5xxx/common/Makefile b/arch/mips/ddb5xxx/common/Makefile
deleted file mode 100644
index 2a6a4e91991c..000000000000
--- a/arch/mips/ddb5xxx/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the common code of NEC DDB-Vrc5xxx board
-#
-
-obj-y	 += nile4.o prom.o rtc_ds1386.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ddb5xxx/common/nile4.c b/arch/mips/ddb5xxx/common/nile4.c
deleted file mode 100644
index 7ec7d903ba97..000000000000
--- a/arch/mips/ddb5xxx/common/nile4.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/common/nile4.c
- *     misc low-level routines for vrc-5xxx controllers.
- *
- * derived from original code by Geert Uytterhoeven <geert@sonycom.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-u32
-ddb_calc_pdar(u32 phys, u32 size, int width,
-	      int on_memory_bus, int pci_visible)
-{
-        u32 maskbits;
-        u32 widthbits;
-
-        switch (size) {
-#if 0                           /* We don't support 4 GB yet */
-        case 0x100000000:       /* 4 GB */
-                maskbits = 4;
-                break;
-#endif
-        case 0x80000000:        /* 2 GB */
-                maskbits = 5;
-                break;
-        case 0x40000000:        /* 1 GB */
-                maskbits = 6;
-                break;
-        case 0x20000000:        /* 512 MB */
-                maskbits = 7;
-                break;
-        case 0x10000000:        /* 256 MB */
-                maskbits = 8;
-                break;
-        case 0x08000000:        /* 128 MB */
-                maskbits = 9;
-                break;
-        case 0x04000000:        /* 64 MB */
-                maskbits = 10;
-                break;
-        case 0x02000000:        /* 32 MB */
-                maskbits = 11;
-                break;
-        case 0x01000000:        /* 16 MB */
-                maskbits = 12;
-                break;
-        case 0x00800000:        /* 8 MB */
-                maskbits = 13;
-                break;
-        case 0x00400000:        /* 4 MB */
-                maskbits = 14;
-                break;
-        case 0x00200000:        /* 2 MB */
-                maskbits = 15;
-                break;
-        case 0:         /* OFF */
-                maskbits = 0;
-                break;
-        default:
-                panic("nile4_set_pdar: unsupported size %p", (void *) size);
-        }
-        switch (width) {
-        case 8:
-                widthbits = 0;
-                break;
-        case 16:
-                widthbits = 1;
-                break;
-        case 32:
-                widthbits = 2;
-                break;
-        case 64:
-                widthbits = 3;
-                break;
-        default:
-                panic("nile4_set_pdar: unsupported width %d", width);
-        }
-
-	return maskbits | (on_memory_bus ? 0x10 : 0) |
-		(pci_visible ? 0x20 : 0) | (widthbits << 6) |
-		(phys & 0xffe00000);
-}
-
-void
-ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width,
-	     int on_memory_bus, int pci_visible)
-{
-	u32 temp= ddb_calc_pdar(phys, size, width, on_memory_bus, pci_visible);
-	ddb_out32(pdar, temp);
-	ddb_out32(pdar + 4, 0);
-
-        /*
-         * When programming a PDAR, the register should be read immediately
-         * after writing it. This ensures that address decoders are properly
-         * configured.
-	 * [jsun] is this really necessary?
-         */
-        ddb_in32(pdar);
-        ddb_in32(pdar + 4);
-}
-
-/*
- * routines that mess with PCIINITx registers
- */
-
-void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options)
-{
-        switch (type) {
-        case DDB_PCICMD_IACK: /* PCI Interrupt Acknowledge */
-        case DDB_PCICMD_IO:   /* PCI I/O Space */
-        case DDB_PCICMD_MEM:  /* PCI Memory Space */
-        case DDB_PCICMD_CFG:  /* PCI Configuration Space */
-                break;
-        default:
-                panic("nile4_set_pmr: invalid type %d", type);
-        }
-        ddb_out32(pmr, (type << 1) | (addr & 0xffe00000) | options );
-        ddb_out32(pmr + 4, 0);
-}
diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
deleted file mode 100644
index 54a857b5e3ba..000000000000
--- a/arch/mips/ddb5xxx/common/prom.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-#include <asm/debug.h>
-
-const char *get_system_type(void)
-{
-	switch (mips_machtype) {
-	case MACH_NEC_DDB5477:		return "NEC DDB Vrc-5477";
-	case MACH_NEC_ROCKHOPPER:	return "NEC Rockhopper";
-	case MACH_NEC_ROCKHOPPERII:     return "NEC RockhopperII";
-	default:			return "Unknown NEC board";
-	}
-}
-
-#if defined(CONFIG_DDB5477)
-void ddb5477_runtime_detection(void);
-#endif
-
-/* [jsun@junsun.net] PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **arg = (char**) fw_arg1;
-	int i;
-
-	/* if user passes kernel args, ignore the default one */
-	if (argc > 1)
-		arcs_cmdline[0] = '\0';
-
-	/* arg[0] is "g", the rest is boot parameters */
-	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, arg[i]);
-		strcat(arcs_cmdline, " ");
-	}
-
-	mips_machgroup = MACH_GROUP_NEC_DDB;
-
-#if defined(CONFIG_DDB5477)
-	ddb5477_runtime_detection();
-	add_memory_region(0, board_ram_size, BOOT_MEM_RAM);
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-#if defined(CONFIG_DDB5477)
-
-#define DEFAULT_LCS1_BASE 0x19000000
-#define TESTVAL1 'K'
-#define TESTVAL2 'S'
-
-int board_ram_size;
-void ddb5477_runtime_detection(void)
-{
-	volatile char *test_offset;
-	char saved_test_byte;
-
-        /* Determine if this is a DDB5477 board, or a BSB-VR0300
-           base board.  We can tell by checking for the location of
-           the NVRAM.  It lives at the beginning of LCS1 on the DDB5477,
-           and the beginning of LCS1 on the BSB-VR0300 is flash memory.
-           The first 2K of the NVRAM are reserved, so don't we'll poke
-           around just after that.
-         */
-
-	/* We can only use the PCI bus to distinquish between
-	   the Rockhopper and RockhopperII backplanes and this must
-	   wait until ddb5477_board_init() in setup.c after the 5477
-	   is initialized.  So, until then handle
-	   both Rockhopper and RockhopperII backplanes as Rockhopper 1
-	 */
-
-        test_offset = (char *)KSEG1ADDR(DEFAULT_LCS1_BASE + 0x800);
-        saved_test_byte = *test_offset;
-
-        *test_offset = TESTVAL1;
-        if (*test_offset != TESTVAL1) {
-                /* We couldn't set our test value, so it must not be NVRAM,
-                   so it's a BSB_VR0300 */
-		mips_machtype = MACH_NEC_ROCKHOPPER;
-        } else {
-                /* We may have gotten lucky, and the TESTVAL1 was already
-                   stored at the test location, so we must check a second
-                   test value */
-                *test_offset = TESTVAL2;
-                if (*test_offset != TESTVAL2) {
-                        /* OK, we couldn't set this value either, so it must
-                           definately be a BSB_VR0300 */
-			mips_machtype = MACH_NEC_ROCKHOPPER;
-                } else {
-                        /* We could change the value twice, so it must be
-                        NVRAM, so it's a DDB_VRC5477 */
-			mips_machtype = MACH_NEC_DDB5477;
-                }
-        }
-        /* Restore the original byte */
-        *test_offset = saved_test_byte;
-
-	/* before we know a better way, we will trust PMON for getting
-	 * RAM size
-	 */
-	board_ram_size = 1 << (36 - (ddb_in32(DDB_SDRAM0) & 0xf));
-
-	db_run(printk("DDB run-time detection : %s, %d MB RAM\n",
-				mips_machtype == MACH_NEC_DDB5477 ?
-				"DDB5477" : "Rockhopper",
-				board_ram_size >> 20));
-
-	/* we can't handle ram size > 128 MB */
-	db_assert(board_ram_size <= (128 << 20));
-}
-#endif
diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c
deleted file mode 100644
index 5dc34daa7150..000000000000
--- a/arch/mips/ddb5xxx/common/rtc_ds1386.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/common/rtc_ds1386.c
- *     low-level RTC hookups for s for Dallas 1396 chip.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-/*
- * This file exports a function, rtc_ds1386_init(), which expects an
- * uncached base address as the argument.  It will set the two function
- * pointers expected by the MIPS generic timer code.
- */
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-
-#include <asm/time.h>
-#include <asm/addrspace.h>
-
-#include <asm/mc146818rtc.h>
-#include <asm/debug.h>
-
-#define	EPOCH		2000
-
-#define	READ_RTC(x)	*(volatile unsigned char*)(rtc_base+x)
-#define	WRITE_RTC(x, y)	*(volatile unsigned char*)(rtc_base+x) = y
-
-static unsigned long rtc_base;
-
-static unsigned long
-rtc_ds1386_get_time(void)
-{
-	u8 byte;
-	u8 temp;
-	unsigned int year, month, day, hour, minute, second;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* let us freeze external registers */
-	byte = READ_RTC(0xB);
-	byte &= 0x3f;
-	WRITE_RTC(0xB, byte);
-
-	/* read time data */
-	year = BCD2BIN(READ_RTC(0xA)) + EPOCH;
-	month = BCD2BIN(READ_RTC(0x9) & 0x1f);
-	day = BCD2BIN(READ_RTC(0x8));
-	minute = BCD2BIN(READ_RTC(0x2));
-	second = BCD2BIN(READ_RTC(0x1));
-
-	/* hour is special - deal with it later */
-	temp = READ_RTC(0x4);
-
-	/* enable time transfer */
-	byte |= 0x80;
-	WRITE_RTC(0xB, byte);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	/* calc hour */
-	if (temp & 0x40) {
-		/* 12 hour format */
-		hour = BCD2BIN(temp & 0x1f);
-		if (temp & 0x20) hour += 12; 		/* PM */
-	} else {
-		/* 24 hour format */
-		hour = BCD2BIN(temp & 0x3f);
-	}
-
-	return mktime(year, month, day, hour, minute, second);
-}
-
-static int
-rtc_ds1386_set_time(unsigned long t)
-{
-	struct rtc_time tm;
-	u8 byte;
-	u8 temp;
-	u8 year, month, day, hour, minute, second;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* let us freeze external registers */
-	byte = READ_RTC(0xB);
-	byte &= 0x3f;
-	WRITE_RTC(0xB, byte);
-
-	/* convert */
-	to_tm(t, &tm);
-
-
-	/* check each field one by one */
-	year = BIN2BCD(tm.tm_year - EPOCH);
-	if (year != READ_RTC(0xA)) {
-		WRITE_RTC(0xA, year);
-	}
-
-	temp = READ_RTC(0x9);
-	month = BIN2BCD(tm.tm_mon+1);	/* tm_mon starts from 0 to 11 */
-	if (month != (temp & 0x1f)) {
-		WRITE_RTC( 0x9,
-			   (month & 0x1f) | (temp & ~0x1f) );
-	}
-
-	day = BIN2BCD(tm.tm_mday);
-	if (day != READ_RTC(0x8)) {
-		WRITE_RTC(0x8, day);
-	}
-
-	temp = READ_RTC(0x4);
-	if (temp & 0x40) {
-		/* 12 hour format */
-		hour = 0x40;
-		if (tm.tm_hour > 12) {
-			hour |= 0x20 | (BIN2BCD(hour-12) & 0x1f);
-		} else {
-			hour |= BIN2BCD(tm.tm_hour);
-		}
-	} else {
-		/* 24 hour format */
-		hour = BIN2BCD(tm.tm_hour) & 0x3f;
-	}
-	if (hour != temp) WRITE_RTC(0x4, hour);
-
-	minute = BIN2BCD(tm.tm_min);
-	if (minute != READ_RTC(0x2)) {
-		WRITE_RTC(0x2, minute);
-	}
-
-	second = BIN2BCD(tm.tm_sec);
-	if (second != READ_RTC(0x1)) {
-		WRITE_RTC(0x1, second);
-	}
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void
-rtc_ds1386_init(unsigned long base)
-{
-	unsigned char byte;
-
-	/* remember the base */
-	rtc_base = base;
-	db_assert((rtc_base & 0xe0000000) == KSEG1);
-
-	/* turn on RTC if it is not on */
-	byte = READ_RTC(0x9);
-	if (byte & 0x80) {
-		byte &= 0x7f;
-		WRITE_RTC(0x9, byte);
-	}
-
-	/* enable time transfer */
-	byte = READ_RTC(0xB);
-	byte |= 0x80;
-	WRITE_RTC(0xB, byte);
-
-	/* set the function pointers */
-	rtc_mips_get_time = rtc_ds1386_get_time;
-	rtc_mips_set_time = rtc_ds1386_set_time;
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile
deleted file mode 100644
index 520094405905..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for NEC DDB-Vrc5477 board
-#
-
-obj-y	 		+= ddb5477-platform.o irq.o irq_5477.o setup.o \
-			   lcd44780.o
-
-obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
-obj-$(CONFIG_KGDB)		+= kgdb_io.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c b/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c
deleted file mode 100644
index c16020ad54c2..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/serial_8250.h>
-
-#include <asm/ddb5xxx/ddb5477.h>
-
-#define DDB_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
-
-#define DDB5477_PORT(base, int)						\
-{									\
-	.mapbase	= base,						\
-	.irq		= int,						\
-	.uartclk	= 1843200,					\
-	.iotype		= UPIO_MEM,					\
-	.flags		= DDB_UART_FLAGS,				\
-	.regshift	= 3,						\
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
-	DDB5477_PORT(0xbfa04200, VRC5477_IRQ_UART0),
-	DDB5477_PORT(0xbfa04240, VRC5477_IRQ_UART1),
-	{ },
-};
-
-static struct platform_device uart8250_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= uart8250_data,
-	},
-};
-
-static int __init uart8250_init(void)
-{
-	return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the NEC DDB5477");
diff --git a/arch/mips/ddb5xxx/ddb5477/debug.c b/arch/mips/ddb5xxx/ddb5477/debug.c
deleted file mode 100644
index 68919d5f8ffd..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/debug.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/***********************************************************************
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5477/debug.c
- *     vrc5477 specific debug routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- ***********************************************************************
- */
-
-#include <linux/kernel.h>
-
-#include <asm/mipsregs.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-typedef struct {
-       const char *regname;
-       unsigned regaddr;
-} Register;
-
-void jsun_show_regs(char *name, Register *regs)
-{
-	int i;
-
-	printk("\nshow regs: %s\n", name);
-	for(i=0;regs[i].regname!= NULL; i++) {
-		printk("%-16s= %08x\t\t(@%08x)\n",
-		       regs[i].regname,
-		       *(unsigned *)(regs[i].regaddr),
-		       regs[i].regaddr);
-	}
-}
-
-static Register int_regs[] = {
-	{"DDB_INTCTRL0", DDB_BASE + DDB_INTCTRL0},
-	{"DDB_INTCTRL1", DDB_BASE + DDB_INTCTRL1},
-	{"DDB_INTCTRL2", DDB_BASE + DDB_INTCTRL2},
-	{"DDB_INTCTRL3", DDB_BASE + DDB_INTCTRL3},
-	{"DDB_INT0STAT", DDB_BASE + DDB_INT0STAT},
-	{"DDB_INT1STAT", DDB_BASE + DDB_INT1STAT},
-	{"DDB_INT2STAT", DDB_BASE + DDB_INT2STAT},
-	{"DDB_INT3STAT", DDB_BASE + DDB_INT3STAT},
-	{"DDB_INT4STAT", DDB_BASE + DDB_INT4STAT},
-	{"DDB_NMISTAT", DDB_BASE + DDB_NMISTAT},
-	{"DDB_INTPPES0", DDB_BASE + DDB_INTPPES0},
-	{"DDB_INTPPES1", DDB_BASE + DDB_INTPPES1},
-	{NULL, 0x0}
-};
-
-void vrc5477_show_int_regs()
-{
-	jsun_show_regs("interrupt registers", int_regs);
-	printk("CPU CAUSE = %08x\n", read_c0_cause());
-	printk("CPU STATUS = %08x\n", read_c0_status());
-}
-static Register pdar_regs[] = {
-        {"DDB_SDRAM0", DDB_BASE + DDB_SDRAM0},
-        {"DDB_SDRAM1", DDB_BASE + DDB_SDRAM1},
-        {"DDB_LCS0", DDB_BASE + DDB_LCS0},
-        {"DDB_LCS1", DDB_BASE + DDB_LCS1},
-        {"DDB_LCS2", DDB_BASE + DDB_LCS2},
-        {"DDB_INTCS", DDB_BASE + DDB_INTCS},
-        {"DDB_BOOTCS", DDB_BASE + DDB_BOOTCS},
-        {"DDB_PCIW0", DDB_BASE + DDB_PCIW0},
-        {"DDB_PCIW1", DDB_BASE + DDB_PCIW1},
-        {"DDB_IOPCIW0", DDB_BASE + DDB_IOPCIW0},
-        {"DDB_IOPCIW1", DDB_BASE + DDB_IOPCIW1},
-        {NULL, 0x0}
-};
-void vrc5477_show_pdar_regs(void)
-{
-        jsun_show_regs("PDAR regs", pdar_regs);
-}
-
-static Register bar_regs[] = {
-        {"DDB_BARC0", DDB_BASE + DDB_BARC0},
-        {"DDB_BARM010", DDB_BASE + DDB_BARM010},
-        {"DDB_BARM230", DDB_BASE + DDB_BARM230},
-        {"DDB_BAR00", DDB_BASE + DDB_BAR00},
-        {"DDB_BAR10", DDB_BASE + DDB_BAR10},
-        {"DDB_BAR20", DDB_BASE + DDB_BAR20},
-        {"DDB_BAR30", DDB_BASE + DDB_BAR30},
-        {"DDB_BAR40", DDB_BASE + DDB_BAR40},
-        {"DDB_BAR50", DDB_BASE + DDB_BAR50},
-        {"DDB_BARB0", DDB_BASE + DDB_BARB0},
-        {"DDB_BARC1", DDB_BASE + DDB_BARC1},
-        {"DDB_BARM011", DDB_BASE + DDB_BARM011},
-        {"DDB_BARM231", DDB_BASE + DDB_BARM231},
-        {"DDB_BAR01", DDB_BASE + DDB_BAR01},
-        {"DDB_BAR11", DDB_BASE + DDB_BAR11},
-        {"DDB_BAR21", DDB_BASE + DDB_BAR21},
-        {"DDB_BAR31", DDB_BASE + DDB_BAR31},
-        {"DDB_BAR41", DDB_BASE + DDB_BAR41},
-        {"DDB_BAR51", DDB_BASE + DDB_BAR51},
-        {"DDB_BARB1", DDB_BASE + DDB_BARB1},
-        {NULL, 0x0}
-};
-void vrc5477_show_bar_regs(void)
-{
-        jsun_show_regs("BAR regs", bar_regs);
-}
-
-static Register pci_regs[] = {
-        {"DDB_PCIW0", DDB_BASE + DDB_PCIW0},
-        {"DDB_PCIW1", DDB_BASE + DDB_PCIW1},
-        {"DDB_PCIINIT00", DDB_BASE + DDB_PCIINIT00},
-        {"DDB_PCIINIT10", DDB_BASE + DDB_PCIINIT10},
-        {"DDB_PCICTL0_L", DDB_BASE + DDB_PCICTL0_L},
-        {"DDB_PCICTL0_H", DDB_BASE + DDB_PCICTL0_H},
-        {"DDB_PCIARB0_L", DDB_BASE + DDB_PCIARB0_L},
-        {"DDB_PCIARB0_H", DDB_BASE + DDB_PCIARB0_H},
-        {"DDB_PCISWP0", DDB_BASE + DDB_PCISWP0},
-        {"DDB_PCIERR0", DDB_BASE + DDB_PCIERR0},
-        {"DDB_IOPCIW0", DDB_BASE + DDB_IOPCIW0},
-        {"DDB_IOPCIW1", DDB_BASE + DDB_IOPCIW1},
-        {"DDB_PCIINIT01", DDB_BASE + DDB_PCIINIT01},
-        {"DDB_PCIINIT11", DDB_BASE + DDB_PCIINIT11},
-        {"DDB_PCICTL1_L", DDB_BASE + DDB_PCICTL1_L},
-        {"DDB_PCICTL1_H", DDB_BASE + DDB_PCICTL1_H},
-        {"DDB_PCIARB1_L", DDB_BASE + DDB_PCIARB1_L},
-        {"DDB_PCIARB1_H", DDB_BASE + DDB_PCIARB1_H},
-        {"DDB_PCISWP1", DDB_BASE + DDB_PCISWP1},
-        {"DDB_PCIERR1", DDB_BASE + DDB_PCIERR1},
-        {NULL, 0x0}
-};
-void vrc5477_show_pci_regs(void)
-{
-        jsun_show_regs("PCI regs", pci_regs);
-}
-
-static Register lb_regs[] = {
-        {"DDB_LCNFG", DDB_BASE + DDB_LCNFG},
-        {"DDB_LCST0", DDB_BASE + DDB_LCST0},
-        {"DDB_LCST1", DDB_BASE + DDB_LCST1},
-        {"DDB_LCST2", DDB_BASE + DDB_LCST2},
-        {"DDB_ERRADR", DDB_BASE + DDB_ERRADR},
-        {"DDB_ERRCS", DDB_BASE + DDB_ERRCS},
-        {"DDB_BTM", DDB_BASE + DDB_BTM},
-        {"DDB_BCST", DDB_BASE + DDB_BCST},
-        {NULL, 0x0}
-};
-void vrc5477_show_lb_regs(void)
-{
-        jsun_show_regs("Local Bus regs", lb_regs);
-}
-
-void vrc5477_show_all_regs(void)
-{
-	vrc5477_show_pdar_regs();
-	vrc5477_show_pci_regs();
-	vrc5477_show_bar_regs();
-	vrc5477_show_int_regs();
-	vrc5477_show_lb_regs();
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
deleted file mode 100644
index faa4a506bf82..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/irq.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *  arch/mips/ddb5xxx/ddb5477/irq.c
- *     The irq setup and misc routines for DDB5476.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/i8259.h>
-#include <asm/irq_cpu.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/debug.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-
-/*
- * IRQ mapping
- *
- *  0-7: 8 CPU interrupts
- *	0 -	software interrupt 0
- *	1 - 	software interrupt 1
- *	2 - 	most Vrc5477 interrupts are routed to this pin
- *	3 - 	(optional) some other interrupts routed to this pin for debugg
- *	4 - 	not used
- *	5 - 	not used
- *	6 - 	not used
- *	7 - 	cpu timer (used by default)
- *
- *  8-39: 32 Vrc5477 interrupt sources
- *	(refer to the Vrc5477 manual)
- */
-
-#define	PCI0			DDB_INTPPES0
-#define	PCI1			DDB_INTPPES1
-
-#define	ACTIVE_LOW		1
-#define	ACTIVE_HIGH		0
-
-#define	LEVEL_SENSE		2
-#define	EDGE_TRIGGER		0
-
-#define	INTA			0
-#define	INTB			1
-#define	INTC			2
-#define	INTD			3
-#define	INTE			4
-
-static inline void
-set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-
-	reg_value = ddb_in32(pci);
-	reg_bitmask = 0x3 << (intn * 2);
-
-	reg_value &= ~reg_bitmask;
-	reg_value |= (active | trigger) << (intn * 2);
-	ddb_out32(pci, reg_value);
-}
-
-extern void vrc5477_irq_init(u32 base);
-static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-void __init arch_init_irq(void)
-{
-	/* by default, we disable all interrupts and route all vrc5477
-	 * interrupts to pin 0 (irq 2) */
-	ddb_out32(DDB_INTCTRL0, 0);
-	ddb_out32(DDB_INTCTRL1, 0);
-	ddb_out32(DDB_INTCTRL2, 0);
-	ddb_out32(DDB_INTCTRL3, 0);
-
-	clear_c0_status(0xff00);
-	set_c0_status(0x0400);
-
-	/* setup PCI interrupt attributes */
-	set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE);
-	if (mips_machtype == MACH_NEC_ROCKHOPPERII)
-		set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE);
-	else
-		set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI0, INTD, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI0, INTE, ACTIVE_LOW, LEVEL_SENSE);
-
-	set_pci_int_attr(PCI1, INTA, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI1, INTB, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI1, INTC, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI1, INTD, ACTIVE_LOW, LEVEL_SENSE);
-	set_pci_int_attr(PCI1, INTE, ACTIVE_LOW, LEVEL_SENSE);
-
-	/*
-	 * for debugging purpose, we enable several error interrupts
-	 * and route them to pin 1. (IP3)
-	 */
-	/* cpu parity check - 0 */
-	ll_vrc5477_irq_route(0, 1); ll_vrc5477_irq_enable(0);
-	/* cpu no-target decode - 1 */
-	ll_vrc5477_irq_route(1, 1); ll_vrc5477_irq_enable(1);
-	/* local bus read time-out - 7 */
-	ll_vrc5477_irq_route(7, 1); ll_vrc5477_irq_enable(7);
-	/* PCI SERR# - 14 */
-	ll_vrc5477_irq_route(14, 1); ll_vrc5477_irq_enable(14);
-	/* PCI internal error - 15 */
-	ll_vrc5477_irq_route(15, 1); ll_vrc5477_irq_enable(15);
-	/* IOPCI SERR# - 30 */
-	ll_vrc5477_irq_route(30, 1); ll_vrc5477_irq_enable(30);
-	/* IOPCI internal error - 31 */
-	ll_vrc5477_irq_route(31, 1); ll_vrc5477_irq_enable(31);
-
-	/* init all controllers */
-	init_i8259_irqs();
-	mips_cpu_irq_init();
-	vrc5477_irq_init(VRC5477_IRQ_BASE);
-
-
-	/* setup cascade interrupts */
-	setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
-	setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
-}
-
-u8 i8259_interrupt_ack(void)
-{
-	u8 irq;
-	u32 reg;
-
-	/* Set window 0 for interrupt acknowledge */
-	reg = ddb_in32(DDB_PCIINIT10);
-
-	ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
-	irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
-	ddb_out32(DDB_PCIINIT10, reg);
-
-	return irq;
-}
-/*
- * the first level int-handler will jump here if it is a vrc5477 irq
- */
-#define	NUM_5477_IRQS	32
-static void vrc5477_irq_dispatch(void)
-{
-	u32 intStatus;
-	u32 bitmask;
-	u32 i;
-
-	db_assert(ddb_in32(DDB_INT2STAT) == 0);
-	db_assert(ddb_in32(DDB_INT3STAT) == 0);
-	db_assert(ddb_in32(DDB_INT4STAT) == 0);
-	db_assert(ddb_in32(DDB_NMISTAT) == 0);
-
-	if (ddb_in32(DDB_INT1STAT) != 0) {
-#if defined(CONFIG_RUNTIME_DEBUG)
-		vrc5477_show_int_regs();
-#endif
-		panic("error interrupt has happened.");
-	}
-
-	intStatus = ddb_in32(DDB_INT0STAT);
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
-		/* check for i8259 interrupts */
-		if (intStatus & (1 << VRC5477_I8259_CASCADE)) {
-			int i8259_irq = i8259_interrupt_ack();
-			do_IRQ(i8259_irq);
-			return;
-		}
-	}
-
-	for (i=0, bitmask=1; i<= NUM_5477_IRQS; bitmask <<=1, i++) {
-		/* do we need to "and" with the int mask? */
-		if (intStatus & bitmask) {
-			do_IRQ(VRC5477_IRQ_BASE + i);
-			return;
-		}
-	}
-}
-
-#define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6)
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(CPU_IRQ_BASE + 7);
-	else if (pending & VR5477INTS)
-		vrc5477_irq_dispatch();
-	else if (pending & STATUSF_IP0)
-		do_IRQ(CPU_IRQ_BASE);
-	else if (pending & STATUSF_IP1)
-		do_IRQ(CPU_IRQ_BASE + 1);
-	else
-		spurious_interrupt();
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/irq_5477.c b/arch/mips/ddb5xxx/ddb5477/irq_5477.c
deleted file mode 100644
index 98c3b15eb369..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/irq_5477.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *  arch/mips/ddb5xxx/ddb5477/irq_5477.c
- *     This file defines the irq handler for Vrc5477.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * Vrc5477 defines 32 IRQs.
- *
- * This file exports one function:
- *	vrc5477_irq_init(u32 irq_base);
- */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-/* number of total irqs supported by Vrc5477 */
-#define	NUM_5477_IRQ		32
-
-static int vrc5477_irq_base = -1;
-
-
-static void
-vrc5477_irq_enable(unsigned int irq)
-{
-	db_assert(vrc5477_irq_base != -1);
-	db_assert(irq >= vrc5477_irq_base);
-	db_assert(irq < vrc5477_irq_base+ NUM_5477_IRQ);
-
-	ll_vrc5477_irq_enable(irq - vrc5477_irq_base);
-}
-
-static void
-vrc5477_irq_disable(unsigned int irq)
-{
-	db_assert(vrc5477_irq_base != -1);
-	db_assert(irq >= vrc5477_irq_base);
-	db_assert(irq < vrc5477_irq_base + NUM_5477_IRQ);
-
-	ll_vrc5477_irq_disable(irq - vrc5477_irq_base);
-}
-
-static void
-vrc5477_irq_ack(unsigned int irq)
-{
-	db_assert(vrc5477_irq_base != -1);
-	db_assert(irq >= vrc5477_irq_base);
-	db_assert(irq < vrc5477_irq_base+ NUM_5477_IRQ);
-
-	/* clear the interrupt bit */
-	/* some irqs require the driver to clear the sources */
-	ddb_out32(DDB_INTCLR32, 1 << (irq - vrc5477_irq_base));
-
-	/* disable interrupt - some handler will re-enable the irq
-	 * and if the interrupt is leveled, we will have infinite loop
-	 */
-	ll_vrc5477_irq_disable(irq - vrc5477_irq_base);
-}
-
-static void
-vrc5477_irq_end(unsigned int irq)
-{
-	db_assert(vrc5477_irq_base != -1);
-	db_assert(irq >= vrc5477_irq_base);
-	db_assert(irq < vrc5477_irq_base + NUM_5477_IRQ);
-
-	if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ll_vrc5477_irq_enable( irq - vrc5477_irq_base);
-}
-
-struct irq_chip vrc5477_irq_controller = {
-	.name = "vrc5477_irq",
-	.ack = vrc5477_irq_ack,
-	.mask = vrc5477_irq_disable,
-	.mask_ack = vrc5477_irq_ack,
-	.unmask = vrc5477_irq_enable,
-	.end = vrc5477_irq_end
-};
-
-void __init vrc5477_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i= irq_base; i< irq_base+ NUM_5477_IRQ; i++)
-		set_irq_chip(i, &vrc5477_irq_controller);
-
-	vrc5477_irq_base = irq_base;
-}
-
-void ll_vrc5477_irq_route(int vrc5477_irq, int ip)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	db_assert(vrc5477_irq >= 0);
-	db_assert(vrc5477_irq < NUM_5477_IRQ);
-	db_assert(ip >= 0);
-	db_assert((ip < 5) || (ip == 6));
-
-	reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
-	reg_value = ddb_in32(reg_index);
-	reg_bitmask = 7 << (vrc5477_irq % 8 * 4);
-	reg_value &= ~reg_bitmask;
-	reg_value |= ip << (vrc5477_irq % 8 * 4);
-	ddb_out32(reg_index, reg_value);
-}
-
-void ll_vrc5477_irq_enable(int vrc5477_irq)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	db_assert(vrc5477_irq >= 0);
-	db_assert(vrc5477_irq < NUM_5477_IRQ);
-
-	reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
-	reg_value = ddb_in32(reg_index);
-	reg_bitmask = 8 << (vrc5477_irq % 8 * 4);
-	db_assert((reg_value & reg_bitmask) == 0);
-	ddb_out32(reg_index, reg_value | reg_bitmask);
-}
-
-void ll_vrc5477_irq_disable(int vrc5477_irq)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	db_assert(vrc5477_irq >= 0);
-	db_assert(vrc5477_irq < NUM_5477_IRQ);
-
-	reg_index = DDB_INTCTRL0 + vrc5477_irq/8*4;
-	reg_value = ddb_in32(reg_index);
-	reg_bitmask = 8 << (vrc5477_irq % 8 * 4);
-
-	/* we assert that the interrupt is enabled (perhaps over-zealous) */
-	db_assert( (reg_value & reg_bitmask) != 0);
-	ddb_out32(reg_index, reg_value & ~reg_bitmask);
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
deleted file mode 100644
index 385bbdb10170..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * kgdb io functions for DDB5477.  We use the second serial port (upper one).
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    0xbfa04240
-#define         MAX_BAUD                115200
-
-/* distance in bytes between two serial registers */
-#define         REG_OFFSET              8
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 0;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define		BAUD_DEFAULT		UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-        /* disable interrupts */
-        UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-        /* set up baud rate */
-        {
-                uint32 divisor;
-
-                /* set DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-                /* set divisor */
-                divisor = MAX_BAUD / baud;
-                UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-                UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-                /* clear DIAB bit */
-                UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-        }
-
-        /* set data format */
-        UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(BAUD_DEFAULT,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-        return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-        if (!remoteDebugInitialized) {
-                remoteDebugInitialized = 1;
-                debugInit(BAUD_DEFAULT,
-                          UART16550_DATA_8BIT,
-                          UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-        }
-
-        while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-        UART16550_WRITE(OFS_SEND_BUFFER, byte);
-        return 1;
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c
deleted file mode 100644
index 9510b9ae6453..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * lcd44780.c
- * Simple "driver" for a memory-mapped 44780-style LCD display.
- *
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#define LCD44780_COMMAND   ((volatile unsigned char *)0xbe020000)
-#define LCD44780_DATA      ((volatile unsigned char *)0xbe020001)
-
-#define LCD44780_4BIT_1LINE        0x20
-#define LCD44780_4BIT_2LINE        0x28
-#define LCD44780_8BIT_1LINE        0x30
-#define LCD44780_8BIT_2LINE        0x38
-#define LCD44780_MODE_DEC          0x04
-#define LCD44780_MODE_DEC_SHIFT    0x05
-#define LCD44780_MODE_INC          0x06
-#define LCD44780_MODE_INC_SHIFT    0x07
-#define LCD44780_SCROLL_LEFT       0x18
-#define LCD44780_SCROLL_RIGHT      0x1e
-#define LCD44780_CURSOR_UNDERLINE  0x0e
-#define LCD44780_CURSOR_BLOCK      0x0f
-#define LCD44780_CURSOR_OFF        0x0c
-#define LCD44780_CLEAR             0x01
-#define LCD44780_BLANK             0x08
-#define LCD44780_RESTORE           0x0c  // Same as CURSOR_OFF
-#define LCD44780_HOME              0x02
-#define LCD44780_LEFT              0x10
-#define LCD44780_RIGHT             0x14
-
-void lcd44780_wait(void)
-{
-	int i, j;
-	for(i=0; i < 400; i++)
-		for(j=0; j < 10000; j++);
-}
-
-void lcd44780_command(unsigned char c)
-{
-	*LCD44780_COMMAND = c;
-	lcd44780_wait();
-}
-
-void lcd44780_data(unsigned char c)
-{
-	*LCD44780_DATA = c;
-	lcd44780_wait();
-}
-
-void lcd44780_puts(const char* s)
-{
-	int j;
-	int pos = 0;
-
-	lcd44780_command(LCD44780_CLEAR);
-	while(*s) {
-		lcd44780_data(*s);
-		s++;
-		pos++;
-		if (pos == 8) {
-		  /* We must write 32 of spaces to get cursor to 2nd line */
-		  for (j=0; j<32; j++) {
-		    lcd44780_data(' ');
-		  }
-		}
-		if (pos == 16) {
-		  /* We have filled all 16 character positions, so stop
-		     outputing data */
-		  break;
-		}
-	}
-#ifdef LCD44780_PUTS_PAUSE
-	{
-		int i;
-
-		for(i = 1; i < 2000; i++)
-			lcd44780_wait();
-	}
-#endif
-}
-
-void lcd44780_init(void)
-{
-	// The display on the RockHopper is physically a single
-	// 16 char line (two 8 char lines concatenated).  bdl
-	lcd44780_command(LCD44780_8BIT_2LINE);
-	lcd44780_command(LCD44780_MODE_INC);
-	lcd44780_command(LCD44780_CURSOR_BLOCK);
-	lcd44780_command(LCD44780_CLEAR);
-}
diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.h b/arch/mips/ddb5xxx/ddb5477/lcd44780.h
deleted file mode 100644
index cf2f0f71eee5..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/lcd44780.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * lcd44780.h
- * Simple "driver" for a memory-mapped 44780-style LCD display.
- *
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-void lcd44780_puts(const char* s);
-void lcd44780_init(void);
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
deleted file mode 100644
index f0cc0e8a8afa..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * arch/mips/ddb5xxx/ddb5477/setup.c
- *     Setup file for DDB5477.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/ioport.h>
-#include <linux/param.h>	/* for HZ */
-#include <linux/major.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/traps.h>
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-#include "lcd44780.h"
-
-
-#define	USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
-
-#define	SP_TIMER_BASE			DDB_SPT1CTRL_L
-#define	SP_TIMER_IRQ			VRC5477_IRQ_SPT1
-
-static int bus_frequency = CONFIG_DDB5477_BUS_FREQUENCY*1000;
-
-static void ddb_machine_restart(char *command)
-{
-	static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
-
-	u32 t;
-
-	/* PCI cold reset */
-	ddb_pci_reset_bus();
-
-	/* CPU cold reset */
-	t = ddb_in32(DDB_CPUSTAT);
-	db_assert((t&1));
-	ddb_out32(DDB_CPUSTAT, t);
-
-	/* Call the PROM */
-	back_to_prom();
-}
-
-static void ddb_machine_halt(void)
-{
-	printk("DDB Vrc-5477 halted.\n");
-	while (1);
-}
-
-static void ddb_machine_power_off(void)
-{
-	printk("DDB Vrc-5477 halted. Please turn off the power.\n");
-	while (1);
-}
-
-extern void rtc_ds1386_init(unsigned long base);
-
-static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
-{
-	unsigned int freq;
-	unsigned char c;
-	unsigned int t1, t2;
-	unsigned i;
-
-	ddb_out32(SP_TIMER_BASE, 0xffffffff);
-	ddb_out32(SP_TIMER_BASE+4, 0x1);
-	ddb_out32(SP_TIMER_BASE+8, 0xffffffff);
-
-	/* check if rtc is running */
-	c= *(volatile unsigned char*)rtc_base;
-	for(i=0; (c == *(volatile unsigned char*)rtc_base) && (i<100000000); i++);
-	if (c == *(volatile unsigned char*)rtc_base) {
-		printk("Failed to detect bus frequency.  Use default 83.3MHz.\n");
-		return 83333000;
-	}
-
-	c= *(volatile unsigned char*)rtc_base;
-	while (c == *(volatile unsigned char*)rtc_base);
-	/* we are now at the turn of 1/100th second, if no error. */
-	t1 = ddb_in32(SP_TIMER_BASE+8);
-
-	for (i=0; i< 10; i++) {
-		c= *(volatile unsigned char*)rtc_base;
-		while (c == *(volatile unsigned char*)rtc_base);
-		/* we are now at the turn of another 1/100th second */
-		t2 = ddb_in32(SP_TIMER_BASE+8);
-	}
-
-	ddb_out32(SP_TIMER_BASE+4, 0x0);	/* disable it again */
-
-	freq = (t1 - t2)*10;
-	printk("DDB bus frequency detection : %u \n", freq);
-	return freq;
-}
-
-static void __init ddb_time_init(void)
-{
-	unsigned long rtc_base;
-	unsigned int i;
-
-	/* we have ds1396 RTC chip */
-	if (mips_machtype == MACH_NEC_ROCKHOPPER
-		||  mips_machtype == MACH_NEC_ROCKHOPPERII) {
-		rtc_base = KSEG1ADDR(DDB_LCS2_BASE);
-	} else {
-		rtc_base = KSEG1ADDR(DDB_LCS1_BASE);
-	}
-	rtc_ds1386_init(rtc_base);
-
-	/* do we need to do run-time detection of bus speed? */
-	if (bus_frequency == 0) {
-		bus_frequency = detect_bus_frequency(rtc_base);
-	}
-
-	/* mips_hpt_frequency is 1/2 of the cpu core freq */
-	i =  (read_c0_config() >> 28 ) & 7;
-	if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
-		i = 4;
-	mips_hpt_frequency = bus_frequency*(i+4)/4;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-#if defined(USE_CPU_COUNTER_TIMER)
-
-        /* we are using the cpu counter for timer interrupts */
-	setup_irq(CPU_IRQ_BASE + 7, irq);
-
-#else
-
-	/* if we use Special purpose timer 1 */
-	ddb_out32(SP_TIMER_BASE, bus_frequency/HZ);
-	ddb_out32(SP_TIMER_BASE+4, 0x1);
-	setup_irq(SP_TIMER_IRQ, irq);
-
-#endif
-}
-
-static void ddb5477_board_init(void);
-
-extern struct pci_controller ddb5477_ext_controller;
-extern struct pci_controller ddb5477_io_controller;
-
-void __init plat_mem_setup(void)
-{
-	/* initialize board - we don't trust the loader */
-        ddb5477_board_init();
-
-	set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
-
-	board_time_init = ddb_time_init;
-
-	_machine_restart = ddb_machine_restart;
-	_machine_halt = ddb_machine_halt;
-	pm_power_off = ddb_machine_power_off;
-
-	/* setup resource limits */
-	ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1;
-	iomem_resource.end = 0xffffffff;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
-
-	register_pci_controller (&ddb5477_ext_controller);
-	register_pci_controller (&ddb5477_io_controller);
-}
-
-static void __init ddb5477_board_init(void)
-{
-	/* ----------- setup PDARs ------------ */
-
-	/* SDRAM should have been set */
-	db_assert(ddb_in32(DDB_SDRAM0) ==
-		    ddb_calc_pdar(DDB_SDRAM_BASE, board_ram_size, 32, 0, 1));
-
-	/* SDRAM1 should be turned off.  What is this for anyway ? */
-	db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0);
-
-	/* Setup local bus. */
-
-	/* Flash U12 PDAR and timing. */
-	ddb_set_pdar(DDB_LCS0, DDB_LCS0_BASE, DDB_LCS0_SIZE, 16, 0, 0);
-	ddb_out32(DDB_LCST0, 0x00090842);
-
-	/* We need to setup LCS1 and LCS2 differently based on the
-	   board_version */
-	if (mips_machtype == MACH_NEC_ROCKHOPPER) {
-		/* Flash U13 PDAR and timing. */
-		ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 16, 0, 0);
-		ddb_out32(DDB_LCST1, 0x00090842);
-
-		/* EPLD (NVRAM, switch, LCD, and mezzanie). */
-		ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 8, 0, 0);
-	} else {
-		/* misc */
-		ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 8, 0, 0);
-		/* mezzanie (?) */
-		ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 16, 0, 0);
-	}
-
-	/* verify VRC5477 base addr */
-	db_assert(ddb_in32(DDB_VRC5477) ==
-		  ddb_calc_pdar(DDB_VRC5477_BASE, DDB_VRC5477_SIZE, 32, 0, 1));
-
-	/* verify BOOT ROM addr */
-	db_assert(ddb_in32(DDB_BOOTCS) ==
-		  ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0));
-
-	/* setup PCI windows - window0 for MEM/config, window1 for IO */
-	ddb_set_pdar(DDB_PCIW0, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1);
-	ddb_set_pdar(DDB_PCIW1, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1);
-	ddb_set_pdar(DDB_IOPCIW0, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1);
-	ddb_set_pdar(DDB_IOPCIW1, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1);
-
-	/* ------------ reset PCI bus and BARs ----------------- */
-	ddb_pci_reset_bus();
-
-	ddb_out32(DDB_BARM010, 0x00000008);
-	ddb_out32(DDB_BARM011, 0x00000008);
-
-	ddb_out32(DDB_BARC0, 0xffffffff);
-	ddb_out32(DDB_BARM230, 0xffffffff);
-	ddb_out32(DDB_BAR00, 0xffffffff);
-	ddb_out32(DDB_BAR10, 0xffffffff);
-	ddb_out32(DDB_BAR20, 0xffffffff);
-	ddb_out32(DDB_BAR30, 0xffffffff);
-	ddb_out32(DDB_BAR40, 0xffffffff);
-	ddb_out32(DDB_BAR50, 0xffffffff);
-	ddb_out32(DDB_BARB0, 0xffffffff);
-
-	ddb_out32(DDB_BARC1, 0xffffffff);
-	ddb_out32(DDB_BARM231, 0xffffffff);
-	ddb_out32(DDB_BAR01, 0xffffffff);
-	ddb_out32(DDB_BAR11, 0xffffffff);
-	ddb_out32(DDB_BAR21, 0xffffffff);
-	ddb_out32(DDB_BAR31, 0xffffffff);
-	ddb_out32(DDB_BAR41, 0xffffffff);
-	ddb_out32(DDB_BAR51, 0xffffffff);
-	ddb_out32(DDB_BARB1, 0xffffffff);
-
-	/*
-	 * We use pci master register 0  for memory space / config space
-	 * And we use register 1 for IO space.
-	 * Note that for memory space, we bump up the pci base address
-	 * so that we have 1:1 mapping between PCI memory and cpu physical.
-	 * For PCI IO space, it starts from 0 in PCI IO space but with
-	 * DDB_xx_IO_BASE in CPU physical address space.
-	 */
-	ddb_set_pmr(DDB_PCIINIT00, DDB_PCICMD_MEM, DDB_PCI0_MEM_BASE,
-		    DDB_PCI_ACCESS_32);
-	ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
-
-	ddb_set_pmr(DDB_PCIINIT01, DDB_PCICMD_MEM, DDB_PCI1_MEM_BASE,
-		    DDB_PCI_ACCESS_32);
-	ddb_set_pmr(DDB_PCIINIT11, DDB_PCICMD_IO, DDB_PCI0_IO_SIZE,
-                    DDB_PCI_ACCESS_32);
-
-
-	/* PCI cross window should be set properly */
-	ddb_set_pdar(DDB_BARP00, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1);
-	ddb_set_pdar(DDB_BARP10, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1);
-	ddb_set_pdar(DDB_BARP01, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1);
-	ddb_set_pdar(DDB_BARP11, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1);
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPER
-	   ||  mips_machtype == MACH_NEC_ROCKHOPPERII) {
-		/* Disable bus diagnostics. */
-		ddb_out32(DDB_PCICTL0_L, 0);
-		ddb_out32(DDB_PCICTL0_H, 0);
-		ddb_out32(DDB_PCICTL1_L, 0);
-		ddb_out32(DDB_PCICTL1_H, 0);
-	}
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPER) {
-		u16			vid;
-		struct pci_bus		bus;
-		struct pci_dev		dev_m1533;
-		extern struct pci_ops 	ddb5477_ext_pci_ops;
-
-		bus.parent      = NULL;    /* we scan the top level only */
-		bus.ops         = &ddb5477_ext_pci_ops;
-		dev_m1533.bus         = &bus;
-		dev_m1533.sysdata     = NULL;
-		dev_m1533.devfn       = 7*8;     // slot 7: M1533 SouthBridge.
-		pci_read_config_word(&dev_m1533, 0, &vid);
-		if (vid == PCI_VENDOR_ID_AL) {
-			printk("Changing mips_machtype to MACH_NEC_ROCKHOPPERII\n");
-			mips_machtype = MACH_NEC_ROCKHOPPERII;
-		}
-	}
-
-	/* enable USB input buffers */
-	ddb_out32(DDB_PIBMISC, 0x00000007);
-
-	/* For dual-function pins, make them all non-GPIO */
-	ddb_out32(DDB_GIUFUNSEL, 0x0);
-	// ddb_out32(DDB_GIUFUNSEL, 0xfe0fcfff);  /* NEC recommanded value */
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
-
-		/* enable IDE controller on Ali chip (south bridge) */
-		u8			temp8;
-		struct pci_bus		bus;
-		struct pci_dev		dev_m1533;
-		struct pci_dev		dev_m5229;
-		extern struct pci_ops 	ddb5477_ext_pci_ops;
-
-		/* Setup M1535 registers */
-		bus.parent      = NULL;    /* we scan the top level only */
-		bus.ops         = &ddb5477_ext_pci_ops;
-		dev_m1533.bus         = &bus;
-		dev_m1533.sysdata     = NULL;
-		dev_m1533.devfn       = 7*8;     // slot 7: M1533 SouthBridge.
-
-		/* setup IDE controller
-		 * enable IDE controller (bit 6 - 1)
-		 * IDE IDSEL to be addr:A15 (bit 4:5 - 11)
-		 * disable IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0)
-		 * enable IDE ATA Primary Bus Signal Pad Control (bit 2 - 1)
-		 */
-		pci_write_config_byte(&dev_m1533, 0x58, 0x74);
-
-		/*
-		 * positive decode (bit6 -0)
-		 * enable IDE controler interrupt (bit 4 -1)
-		 * setup SIRQ to point to IRQ 14 (bit 3:0 - 1101)
-		 */
-		pci_write_config_byte(&dev_m1533, 0x44, 0x1d);
-
-		/* Setup M5229 registers */
-		dev_m5229.bus = &bus;
-		dev_m5229.sysdata = NULL;
-		dev_m5229.devfn = 4*8;  	// slot 4 (AD15): M5229 IDE
-
-		/*
-		 * enable IDE in the M5229 config register 0x50 (bit 0 - 1)
-		 * M5229 IDSEL is addr:15; see above setting
-		 */
-		pci_read_config_byte(&dev_m5229, 0x50, &temp8);
-		pci_write_config_byte(&dev_m5229, 0x50, temp8 | 0x1);
-
-		/*
-		 * enable bus master (bit 2)  and IO decoding  (bit 0)
-		 */
-		pci_read_config_byte(&dev_m5229, 0x04, &temp8);
-		pci_write_config_byte(&dev_m5229, 0x04, temp8 | 0x5);
-
-		/*
-		 * enable native, copied from arch/ppc/k2boot/head.S
-		 * TODO - need volatile, need to be portable
-		 */
-		pci_write_config_byte(&dev_m5229, 0x09, 0xef);
-
-		/* Set Primary Channel Command Block Timing */
-		pci_write_config_byte(&dev_m5229, 0x59, 0x31);
-
-		/*
-		 * Enable primary channel 40-pin cable
-		 * M5229 register 0x4a (bit 0)
-		 */
-		pci_read_config_byte(&dev_m5229, 0x4a, &temp8);
-		pci_write_config_byte(&dev_m5229, 0x4a, temp8 | 0x1);
-	}
-
-	if (mips_machtype == MACH_NEC_ROCKHOPPER
-	   ||  mips_machtype == MACH_NEC_ROCKHOPPERII) {
-		printk("lcd44780: initializing\n");
-		lcd44780_init();
-		lcd44780_puts("MontaVista Linux");
-	}
-}