[MIPS] Remove support for NEC DDB5074.

As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

5 files changed, 1 insertions, 701 deletions

diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
index b8d1f7489f3b..18eecbcdfca8 100644
--- a/arch/mips/ddb5xxx/common/prom.c
+++ b/arch/mips/ddb5xxx/common/prom.c
@@ -56,10 +56,7 @@ void __init prom_init(void)
 
 	mips_machgroup = MACH_GROUP_NEC_DDB;
 
-#if defined(CONFIG_DDB5074)
-	mips_machtype = MACH_NEC_DDB5074;
-	add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
-#elif defined(CONFIG_DDB5476)
+#if defined(CONFIG_DDB5476)
 	mips_machtype = MACH_NEC_DDB5476;
 	add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
 #elif defined(CONFIG_DDB5477)
diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile
deleted file mode 100644
index 304c02107b46..000000000000
--- a/arch/mips/ddb5xxx/ddb5074/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the NEC DDB Vrc-5074 specific kernel interface routines
-# under Linux.
-#
-
-obj-y			+= setup.o irq.o nile4_pic.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c
deleted file mode 100644
index 60c087b7738c..000000000000
--- a/arch/mips/ddb5xxx/ddb5074/irq.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- *  arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/i8259.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/ptrace.h>
-#include <asm/nile4.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-#include <asm/ddb5xxx/ddb5074.h>
-
-
-static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
-
-#define M1543_PNP_CONFIG	0x03f0	/* PnP Config Port */
-#define M1543_PNP_INDEX		0x03f0	/* PnP Index Port */
-#define M1543_PNP_DATA		0x03f1	/* PnP Data Port */
-
-#define M1543_PNP_ALT_CONFIG	0x0370	/* Alternative PnP Config Port */
-#define M1543_PNP_ALT_INDEX	0x0370	/* Alternative PnP Index Port */
-#define M1543_PNP_ALT_DATA	0x0371	/* Alternative PnP Data Port */
-
-#define M1543_INT1_MASTER_CTRL	0x0020	/* INT_1 (master) Control Register */
-#define M1543_INT1_MASTER_MASK	0x0021	/* INT_1 (master) Mask Register */
-
-#define M1543_INT1_SLAVE_CTRL	0x00a0	/* INT_1 (slave) Control Register */
-#define M1543_INT1_SLAVE_MASK	0x00a1	/* INT_1 (slave) Mask Register */
-
-#define M1543_INT1_MASTER_ELCR	0x04d0	/* INT_1 (master) Edge/Level Control */
-#define M1543_INT1_SLAVE_ELCR	0x04d1	/* INT_1 (slave) Edge/Level Control */
-
-
-static void m1543_irq_setup(void)
-{
-	/*
-	 *  The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13.  Not all
-	 *  the possible IO sources in the M1543 are in use by us.  We will
-	 *  use the following mapping:
-	 *
-	 *      IRQ1  - keyboard (default set by M1543)
-	 *      IRQ3  - reserved for UART B (default set by M1543) (note that
-	 *              the schematics for the DDB Vrc-5074 board seem to
-	 *              indicate that IRQ3 is connected to the DS1386
-	 *              watchdog timer interrupt output so we might have
-	 *              a conflict)
-	 *      IRQ4  - reserved for UART A (default set by M1543)
-	 *      IRQ5  - parallel (default set by M1543)
-	 *      IRQ8  - DS1386 time of day (RTC) interrupt
-	 *      IRQ12 - mouse
-	 */
-
-	/*
-	 *  Assing mouse interrupt to IRQ12
-	 */
-
-	/* Enter configuration mode */
-	outb(0x51, M1543_PNP_CONFIG);
-	outb(0x23, M1543_PNP_CONFIG);
-
-	/* Select logical device 7 (Keyboard) */
-	outb(0x07, M1543_PNP_INDEX);
-	outb(0x07, M1543_PNP_DATA);
-
-	/* Select IRQ12 */
-	outb(0x72, M1543_PNP_INDEX);
-	outb(0x0c, M1543_PNP_DATA);
-
-	outb(0x30, M1543_PNP_INDEX);
-	printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA));
-
-	outb(0x70, M1543_PNP_INDEX);
-	printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA));
-
-	/* Leave configration mode */
-	outb(0xbb, M1543_PNP_CONFIG);
-
-
-}
-
-static void ddb_local0_irqdispatch(struct pt_regs *regs)
-{
-	u32 mask;
-	int nile4_irq;
-
-	mask = nile4_get_irq_stat(0);
-
-	/* Handle the timer interrupt first */
-#if 0
-	if (mask & (1 << NILE4_INT_GPT)) {
-		do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
-		mask &= ~(1 << NILE4_INT_GPT);
-	}
-#endif
-	for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
-		if (mask & 1) {
-			if (nile4_irq == NILE4_INT_INTE) {
-				int i8259_irq;
-
-				nile4_clear_irq(NILE4_INT_INTE);
-				i8259_irq = nile4_i8259_iack();
-				do_IRQ(i8259_irq, regs);
-			} else
-				do_IRQ(nile4_to_irq(nile4_irq), regs);
-
-		}
-}
-
-static void ddb_local1_irqdispatch(void)
-{
-	printk("ddb_local1_irqdispatch called\n");
-}
-
-static void ddb_buserror_irq(void)
-{
-	printk("ddb_buserror_irq called\n");
-}
-
-static void ddb_8254timer_irq(void)
-{
-	printk("ddb_8254timer_irq called\n");
-}
-
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status();
-
-	if (pending & CAUSEF_IP2)
-		ddb_local0_irqdispatch(regs);
-	else if (pending & CAUSEF_IP3)
-		ddb_local1_irqdispatch();
-	else if (pending & CAUSEF_IP6)
-		ddb_buserror_irq();
-	else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
-		ddb_8254timer_irq();
-}
-
-void __init arch_init_irq(void)
-{
-	/* setup cascade interrupts */
-	setup_irq(NILE4_IRQ_BASE  + NILE4_INT_INTE, &irq_cascade);
-	setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
-
-	nile4_irq_setup(NILE4_IRQ_BASE);
-	m1543_irq_setup();
-	init_i8259_irqs();
-
-
-	printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE);
-
-	mips_cpu_irq_init(CPU_IRQ_BASE);
-
-	printk("enabling 8259 cascade\n");
-
-	ddb5074_led_hex(0);
-
-	/* Enable the interrupt cascade */
-	nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE);
-}
diff --git a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c b/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
deleted file mode 100644
index 8743ffce8653..000000000000
--- a/arch/mips/ddb5xxx/ddb5074/nile4_pic.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- *  arch/mips/ddb5476/nile4.c --
- *  	low-level PIC code for NEC Vrc-5476 (Nile 4)
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- *
- *  Copyright 2001 MontaVista Software Inc.
- *  Author: jsun@mvista.com or jsun@junsun.net
- *
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static int irq_base;
-
-/*
- *  Interrupt Programming
- */
-void nile4_map_irq(int nile4_irq, int cpu_irq)
-{
-	u32 offset, t;
-
-	offset = DDB_INTCTRL;
-	if (nile4_irq >= 8) {
-		offset += 4;
-		nile4_irq -= 8;
-	}
-	t = ddb_in32(offset);
-	t &= ~(7 << (nile4_irq * 4));
-	t |= cpu_irq << (nile4_irq * 4);
-	ddb_out32(offset, t);
-}
-
-void nile4_map_irq_all(int cpu_irq)
-{
-	u32 all, t;
-
-	all = cpu_irq;
-	all |= all << 4;
-	all |= all << 8;
-	all |= all << 16;
-	t = ddb_in32(DDB_INTCTRL);
-	t &= 0x88888888;
-	t |= all;
-	ddb_out32(DDB_INTCTRL, t);
-	t = ddb_in32(DDB_INTCTRL + 4);
-	t &= 0x88888888;
-	t |= all;
-	ddb_out32(DDB_INTCTRL + 4, t);
-}
-
-void nile4_enable_irq(unsigned int nile4_irq)
-{
-	u32 offset, t;
-
-	nile4_irq-=irq_base;
-
-	ddb5074_led_hex(8);
-
-	offset = DDB_INTCTRL;
-	if (nile4_irq >= 8) {
-		offset += 4;
-		nile4_irq -= 8;
-	}
-	ddb5074_led_hex(9);
-	t = ddb_in32(offset);
-	ddb5074_led_hex(0xa);
-	t |= 8 << (nile4_irq * 4);
-	ddb_out32(offset, t);
-	ddb5074_led_hex(0xb);
-}
-
-void nile4_disable_irq(unsigned int nile4_irq)
-{
-	u32 offset, t;
-
-	nile4_irq-=irq_base;
-
-	offset = DDB_INTCTRL;
-	if (nile4_irq >= 8) {
-		offset += 4;
-		nile4_irq -= 8;
-	}
-	t = ddb_in32(offset);
-	t &= ~(8 << (nile4_irq * 4));
-	ddb_out32(offset, t);
-}
-
-void nile4_disable_irq_all(void)
-{
-	ddb_out32(DDB_INTCTRL, 0);
-	ddb_out32(DDB_INTCTRL + 4, 0);
-}
-
-u16 nile4_get_irq_stat(int cpu_irq)
-{
-	return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2);
-}
-
-void nile4_enable_irq_output(int cpu_irq)
-{
-	u32 t;
-
-	t = ddb_in32(DDB_INTSTAT1 + 4);
-	t |= 1 << (16 + cpu_irq);
-	ddb_out32(DDB_INTSTAT1, t);
-}
-
-void nile4_disable_irq_output(int cpu_irq)
-{
-	u32 t;
-
-	t = ddb_in32(DDB_INTSTAT1 + 4);
-	t &= ~(1 << (16 + cpu_irq));
-	ddb_out32(DDB_INTSTAT1, t);
-}
-
-void nile4_set_pci_irq_polarity(int pci_irq, int high)
-{
-	u32 t;
-
-	t = ddb_in32(DDB_INTPPES);
-	if (high)
-		t &= ~(1 << (pci_irq * 2));
-	else
-		t |= 1 << (pci_irq * 2);
-	ddb_out32(DDB_INTPPES, t);
-}
-
-void nile4_set_pci_irq_level_or_edge(int pci_irq, int level)
-{
-	u32 t;
-
-	t = ddb_in32(DDB_INTPPES);
-	if (level)
-		t |= 2 << (pci_irq * 2);
-	else
-		t &= ~(2 << (pci_irq * 2));
-	ddb_out32(DDB_INTPPES, t);
-}
-
-void nile4_clear_irq(int nile4_irq)
-{
-	nile4_irq-=irq_base;
-	ddb_out32(DDB_INTCLR, 1 << nile4_irq);
-}
-
-void nile4_clear_irq_mask(u32 mask)
-{
-	ddb_out32(DDB_INTCLR, mask);
-}
-
-u8 nile4_i8259_iack(void)
-{
-	u8 irq;
-	u32 reg;
-
-	/* Set window 0 for interrupt acknowledge */
-	reg = ddb_in32(DDB_PCIINIT0);
-
-	ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
-	irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
-	/* restore window 0 for PCI I/O space */
-	// ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
-	ddb_out32(DDB_PCIINIT0, reg);
-
-	/* i8269.c set the base vector to be 0x0 */
-	return irq ;
-}
-
-static unsigned int nile4_irq_startup(unsigned int irq) {
-
-	nile4_enable_irq(irq);
-	return 0;
-
-}
-
-static void nile4_ack_irq(unsigned int irq) {
-
-    ddb5074_led_hex(4);
-
-	nile4_clear_irq(irq);
-    ddb5074_led_hex(2);
-	nile4_disable_irq(irq);
-
-    ddb5074_led_hex(0);
-}
-
-static void nile4_irq_end(unsigned int irq) {
-
-	ddb5074_led_hex(3);
-	if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-	ddb5074_led_hex(5);
-		nile4_enable_irq(irq);
-	ddb5074_led_hex(7);
-	}
-
-	ddb5074_led_hex(1);
-}
-
-#define nile4_irq_shutdown nile4_disable_irq
-
-static hw_irq_controller nile4_irq_controller = {
-	.typename = "nile4",
-	.startup = nile4_irq_startup,
-	.shutdown = nile4_irq_shutdown,
-	.enable = nile4_enable_irq,
-	.disable = nile4_disable_irq,
-	.ack = nile4_ack_irq,
-	.end = nile4_irq_end,
-};
-
-void nile4_irq_setup(u32 base) {
-
-	int i;
-
-	irq_base=base;
-
-	/* Map all interrupts to CPU int #0 */
-	nile4_map_irq_all(0);
-
-	/* PCI INTA#-E# must be level triggered */
-	nile4_set_pci_irq_level_or_edge(0, 1);
-	nile4_set_pci_irq_level_or_edge(1, 1);
-	nile4_set_pci_irq_level_or_edge(2, 1);
-	nile4_set_pci_irq_level_or_edge(3, 1);
-	nile4_set_pci_irq_level_or_edge(4, 1);
-
-	/* PCI INTA#-D# must be active low, INTE# must be active high */
-	nile4_set_pci_irq_polarity(0, 0);
-	nile4_set_pci_irq_polarity(1, 0);
-	nile4_set_pci_irq_polarity(2, 0);
-	nile4_set_pci_irq_polarity(3, 0);
-	nile4_set_pci_irq_polarity(4, 1);
-
-
-	for (i = 0; i < 16; i++) {
-		nile4_clear_irq(i);
-		nile4_disable_irq(i);
-	}
-
-	/* Enable CPU int #0 */
-	nile4_enable_irq_output(0);
-
-	for (i= base; i< base + NUM_NILE4_INTERRUPTS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-		irq_desc[i].handler = &nile4_irq_controller;
-	}
-}
-
-#if defined(CONFIG_RUNTIME_DEBUG)
-void nile4_dump_irq_status(void)
-{
-	printk(KERN_DEBUG "
-	       CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4),
-	       (void *) ddb_in32(DDB_CPUSTAT));
-	printk(KERN_DEBUG "
-	       INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4),
-	       (void *) ddb_in32(DDB_INTCTRL));
-	printk(KERN_DEBUG
-	       "INTSTAT0 = %p:%p\n",
-	       (void *) ddb_in32(DDB_INTSTAT0 + 4),
-	       (void *) ddb_in32(DDB_INTSTAT0));
-	printk(KERN_DEBUG
-	       "INTSTAT1 = %p:%p\n",
-	       (void *) ddb_in32(DDB_INTSTAT1 + 4),
-	       (void *) ddb_in32(DDB_INTSTAT1));
-	printk(KERN_DEBUG
-	       "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4),
-	       (void *) ddb_in32(DDB_INTCLR));
-	printk(KERN_DEBUG
-	       "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4),
-	       (void *) ddb_in32(DDB_INTPPES));
-}
-
-#endif
diff --git a/arch/mips/ddb5xxx/ddb5074/setup.c b/arch/mips/ddb5xxx/ddb5074/setup.c
deleted file mode 100644
index 4882ad1052e7..000000000000
--- a/arch/mips/ddb5xxx/ddb5074/setup.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- *  arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <linux/init.h>
-#include <linux/kbd_ll.h>
-#include <linux/kernel.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-
-#include <asm/addrspace.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/time.h>
-#include <asm/nile4.h>
-#include <asm/ddb5xxx/ddb5074.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
-
-static void ddb_machine_restart(char *command)
-{
-	u32 t;
-
-	/* PCI cold reset */
-	t = nile4_in32(NILE4_PCICTRL + 4);
-	t |= 0x40000000;
-	nile4_out32(NILE4_PCICTRL + 4, t);
-	/* CPU cold reset */
-	t = nile4_in32(NILE4_CPUSTAT);
-	t |= 1;
-	nile4_out32(NILE4_CPUSTAT, t);
-	/* Call the PROM */
-	back_to_prom();
-}
-
-static void ddb_machine_halt(void)
-{
-	printk("DDB Vrc-5074 halted.\n");
-	do {
-	} while (1);
-}
-
-static void ddb_machine_power_off(void)
-{
-	printk("DDB Vrc-5074 halted. Please turn off the power.\n");
-	do {
-	} while (1);
-}
-
-extern void rtc_ds1386_init(unsigned long base);
-
-extern void (*board_timer_setup) (struct irqaction * irq);
-
-static void __init ddb_timer_init(struct irqaction *irq)
-{
-	/* set the clock to 1 Hz */
-	nile4_out32(NILE4_T2CTRL, 1000000);
-	/* enable the General-Purpose Timer */
-	nile4_out32(NILE4_T2CTRL + 4, 0x00000001);
-	/* reset timer */
-	nile4_out32(NILE4_T2CNTR, 0);
-	/* enable interrupt */
-	setup_irq(nile4_to_irq(NILE4_INT_GPT), irq);
-	nile4_enable_irq(nile4_to_irq(NILE4_INT_GPT));
-	change_c0_status(ST0_IM,
-		          IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
-
-}
-
-static void __init ddb_time_init(void)
-{
-	/* we have ds1396 RTC chip */
-	rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE));
-}
-
-
-
-void __init plat_mem_setup(void)
-{
-	set_io_port_base(NILE4_PCI_IO_BASE);
-	isa_slot_offset = NILE4_PCI_MEM_BASE;
-	board_timer_setup = ddb_timer_init;
-	board_time_init = ddb_time_init;
-
-
-	_machine_restart = ddb_machine_restart;
-	_machine_halt = ddb_machine_halt;
-	pm_power_off = ddb_machine_power_off;
-
-	ddb_out32(DDB_BAR0, 0);
-
-	ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, 0x10);
-	ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE , 0x10);
-
-	/* Reboot on panic */
-	panic_timeout = 180;
-}
-
-#define USE_NILE4_SERIAL	0
-
-#if USE_NILE4_SERIAL
-#define ns16550_in(reg)		nile4_in8((reg)*8)
-#define ns16550_out(reg, val)	nile4_out8((reg)*8, (val))
-#else
-#define NS16550_BASE		(NILE4_PCI_IO_BASE+0x03f8)
-static inline u8 ns16550_in(u32 reg)
-{
-	return *(volatile u8 *) (NS16550_BASE + reg);
-}
-
-static inline void ns16550_out(u32 reg, u8 val)
-{
-	*(volatile u8 *) (NS16550_BASE + reg) = val;
-}
-#endif
-
-#define NS16550_RBR		0
-#define NS16550_THR		0
-#define NS16550_DLL		0
-#define NS16550_IER		1
-#define NS16550_DLM		1
-#define NS16550_FCR		2
-#define NS16550_IIR		2
-#define NS16550_LCR		3
-#define NS16550_MCR		4
-#define NS16550_LSR		5
-#define NS16550_MSR		6
-#define NS16550_SCR		7
-
-#define NS16550_LSR_DR		0x01	/* Data ready */
-#define NS16550_LSR_OE		0x02	/* Overrun */
-#define NS16550_LSR_PE		0x04	/* Parity error */
-#define NS16550_LSR_FE		0x08	/* Framing error */
-#define NS16550_LSR_BI		0x10	/* Break */
-#define NS16550_LSR_THRE	0x20	/* Xmit holding register empty */
-#define NS16550_LSR_TEMT	0x40	/* Xmitter empty */
-#define NS16550_LSR_ERR		0x80	/* Error */
-
-
-void _serinit(void)
-{
-#if USE_NILE4_SERIAL
-	ns16550_out(NS16550_LCR, 0x80);
-	ns16550_out(NS16550_DLM, 0x00);
-	ns16550_out(NS16550_DLL, 0x36);	/* 9600 baud */
-	ns16550_out(NS16550_LCR, 0x00);
-	ns16550_out(NS16550_LCR, 0x03);
-	ns16550_out(NS16550_FCR, 0x47);
-#else
-	/* done by PMON */
-#endif
-}
-
-void _putc(char c)
-{
-	while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE));
-	ns16550_out(NS16550_THR, c);
-	if (c == '\n') {
-		while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE));
-		ns16550_out(NS16550_THR, '\r');
-	}
-}
-
-void _puts(const char *s)
-{
-	char c;
-	while ((c = *s++))
-		_putc(c);
-}
-
-char _getc(void)
-{
-	while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR));
-	return ns16550_in(NS16550_RBR);
-}
-
-int _testc(void)
-{
-	return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0;
-}
-
-
-/*
- *  Hexadecimal 7-segment LED
- */
-void ddb5074_led_hex(int hex)
-{
-	outb(hex, 0x80);
-}
-
-
-/*
- *  LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543
- */
-struct pci_dev *pci_pmu = NULL;
-
-void ddb5074_led_d2(int on)
-{
-	u8 t;
-
-	if (pci_pmu) {
-		pci_read_config_byte(pci_pmu, 0x7e, &t);
-		if (on)
-			t &= 0x7f;
-		else
-			t |= 0x80;
-		pci_write_config_byte(pci_pmu, 0x7e, t);
-	}
-}
-
-void ddb5074_led_d3(int on)
-{
-	u8 t;
-
-	if (pci_pmu) {
-		pci_read_config_byte(pci_pmu, 0x7e, &t);
-		if (on)
-			t &= 0xbf;
-		else
-			t |= 0x40;
-		pci_write_config_byte(pci_pmu, 0x7e, t);
-	}
-}