MIPS: ath25: add board configuration detection

All boards based on AR5312/AR2315 SoC have a special structure located
at the end of flash. This structure contains board-specific data such as
Ethernet and Wireless MAC addresses. The flash is mapped to the memmory
at predefined location.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8243/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 73 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-ath25/ath25_platform.h b/arch/mips/include/asm/mach-ath25/ath25_platform.h
new file mode 100644
index 000000000000..4f4ee4f9e5ec
--- /dev/null
+++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_MACH_ATH25_PLATFORM_H
+#define __ASM_MACH_ATH25_PLATFORM_H
+
+#include <linux/etherdevice.h>
+
+/*
+ * This is board-specific data that is stored in a "fixed" location in flash.
+ * It is shared across operating systems, so it should not be changed lightly.
+ * The main reason we need it is in order to extract the ethernet MAC
+ * address(es).
+ */
+struct ath25_boarddata {
+	u32 magic;                   /* board data is valid */
+#define ATH25_BD_MAGIC 0x35333131    /* "5311", for all 531x/231x platforms */
+	u16 cksum;                   /* checksum (starting with BD_REV 2) */
+	u16 rev;                     /* revision of this struct */
+#define BD_REV 4
+	char board_name[64];         /* Name of board */
+	u16 major;                   /* Board major number */
+	u16 minor;                   /* Board minor number */
+	u32 flags;                   /* Board configuration */
+#define BD_ENET0        0x00000001   /* ENET0 is stuffed */
+#define BD_ENET1        0x00000002   /* ENET1 is stuffed */
+#define BD_UART1        0x00000004   /* UART1 is stuffed */
+#define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
+#define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
+#define BD_SYSLED       0x00000020   /* System LED stuffed */
+#define BD_EXTUARTCLK   0x00000040   /* External UART clock */
+#define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
+#define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
+#define BD_WLAN0        0x00000200   /* Enable WLAN0 */
+#define BD_MEMCAP       0x00000400   /* CAP SDRAM @ mem_cap for testing */
+#define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
+#define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
+#define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
+#define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
+#define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
+#define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
+#define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
+	u16 reset_config_gpio;       /* Reset factory GPIO pin */
+	u16 sys_led_gpio;            /* System LED GPIO pin */
+
+	u32 cpu_freq;                /* CPU core frequency in Hz */
+	u32 sys_freq;                /* System frequency in Hz */
+	u32 cnt_freq;                /* Calculated C0_COUNT frequency */
+
+	u8  wlan0_mac[ETH_ALEN];
+	u8  enet0_mac[ETH_ALEN];
+	u8  enet1_mac[ETH_ALEN];
+
+	u16 pci_id;                  /* Pseudo PCIID for common code */
+	u16 mem_cap;                 /* cap bank1 in MB */
+
+	/* version 3 */
+	u8  wlan1_mac[ETH_ALEN];     /* (ar5212) */
+};
+
+#define BOARD_CONFIG_BUFSZ		0x1000
+
+/*
+ * Platform device information for the Wireless MAC
+ */
+struct ar231x_board_config {
+	u16 devid;
+
+	/* board config data */
+	struct ath25_boarddata *config;
+
+	/* radio calibration data */
+	const char *radio;
+};
+
+#endif /* __ASM_MACH_ATH25_PLATFORM_H */