Merge commit 'v3.3-rc1' into fbdev-next

1 files changed, 157 insertions, 0 deletions

diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h
new file mode 100644
index 000000000000..88527fa835c9
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h
@@ -0,0 +1,157 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ *
+ * Helper functions to abstract board specific data about
+ * network ports from the rest of the cvmx-helper files.
+ *
+ */
+#ifndef __CVMX_HELPER_BOARD_H__
+#define __CVMX_HELPER_BOARD_H__
+
+#include "cvmx-helper.h"
+
+typedef enum {
+	set_phy_link_flags_autoneg = 0x1,
+	set_phy_link_flags_flow_control_dont_touch = 0x0 << 1,
+	set_phy_link_flags_flow_control_enable = 0x1 << 1,
+	set_phy_link_flags_flow_control_disable = 0x2 << 1,
+	set_phy_link_flags_flow_control_mask = 0x3 << 1,	/* Mask for 2 bit wide flow control field */
+} cvmx_helper_board_set_phy_link_flags_types_t;
+
+/*
+ * Fake IPD port, the RGMII/MII interface may use different PHY, use
+ * this macro to return appropriate MIX address to read the PHY.
+ */
+#define CVMX_HELPER_BOARD_MGMT_IPD_PORT     -10
+
+/**
+ * cvmx_override_board_link_get(int ipd_port) is a function
+ * pointer. It is meant to allow customization of the process of
+ * talking to a PHY to determine link speed. It is called every
+ * time a PHY must be polled for link status. Users should set
+ * this pointer to a function before calling any cvmx-helper
+ * operations.
+ */
+extern cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port);
+
+/**
+ * Return the MII PHY address associated with the given IPD
+ * port. A result of -1 means there isn't a MII capable PHY
+ * connected to this port. On chips supporting multiple MII
+ * busses the bus number is encoded in bits <15:8>.
+ *
+ * This function must be modifed for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relys on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: Octeon IPD port to get the MII address for.
+ *
+ * Returns MII PHY address and bus number or -1.
+ */
+extern int cvmx_helper_board_get_mii_address(int ipd_port);
+
+/**
+ * This function as a board specific method of changing the PHY
+ * speed, duplex, and autonegotiation. This programs the PHY and
+ * not Octeon. This can be used to force Octeon's links to
+ * specific settings.
+ *
+ * @phy_addr:  The address of the PHY to program
+ * @link_flags:
+ *                  Flags to control autonegotiation.  Bit 0 is autonegotiation
+ *                  enable/disable to maintain backware compatibility.
+ * @link_info: Link speed to program. If the speed is zero and autonegotiation
+ *                  is enabled, all possible negotiation speeds are advertised.
+ *
+ * Returns Zero on success, negative on failure
+ */
+int cvmx_helper_board_link_set_phy(int phy_addr,
+				   cvmx_helper_board_set_phy_link_flags_types_t
+				   link_flags,
+				   cvmx_helper_link_info_t link_info);
+
+/**
+ * This function is the board specific method of determining an
+ * ethernet ports link speed. Most Octeon boards have Marvell PHYs
+ * and are handled by the fall through case. This function must be
+ * updated for boards that don't have the normal Marvell PHYs.
+ *
+ * This function must be modifed for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relys on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @ipd_port: IPD input port associated with the port we want to get link
+ *                 status for.
+ *
+ * Returns The ports link status. If the link isn't fully resolved, this must
+ *         return zero.
+ */
+extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port);
+
+/**
+ * This function is called by cvmx_helper_interface_probe() after it
+ * determines the number of ports Octeon can support on a specific
+ * interface. This function is the per board location to override
+ * this value. It is called with the number of ports Octeon might
+ * support and should return the number of actual ports on the
+ * board.
+ *
+ * This function must be modifed for every new Octeon board.
+ * Internally it uses switch statements based on the cvmx_sysinfo
+ * data to determine board types and revisions. It relys on the
+ * fact that every Octeon board receives a unique board type
+ * enumeration from the bootloader.
+ *
+ * @interface: Interface to probe
+ * @supported_ports:
+ *                  Number of ports Octeon supports.
+ *
+ * Returns Number of ports the actual board supports. Many times this will
+ *         simple be "support_ports".
+ */
+extern int __cvmx_helper_board_interface_probe(int interface,
+					       int supported_ports);
+
+/**
+ * Enable packet input/output from the hardware. This function is
+ * called after by cvmx_helper_packet_hardware_enable() to
+ * perform board specific initialization. For most boards
+ * nothing is needed.
+ *
+ * @interface: Interface to enable
+ *
+ * Returns Zero on success, negative on failure
+ */
+extern int __cvmx_helper_board_hardware_enable(int interface);
+
+#endif /* __CVMX_HELPER_BOARD_H__ */