diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-16 21:40:55 +0200 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-16 21:40:55 +0200 |
| commit | 09a31a7e3723afd79022d5d3ff3634c2630c2eeb (patch) | |
| tree | b9bbf21da582f1c62b0ae8f1e4498754f0198458 /arch/mips/include | |
| parent | Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390... (diff) | |
| parent | MIPS: DEC: Restore bootmem reservation for firmware working memory area (diff) | |
| download | linux-09a31a7e3723afd79022d5d3ff3634c2630c2eeb.tar.xz linux-09a31a7e3723afd79022d5d3ff3634c2630c2eeb.zip | |
Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make use
of 16byte load/stores possible
- cleanups and fixes
* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
MIPS: DEC: Restore bootmem reservation for firmware working memory area
MIPS: dec: fix section mismatch
bcm963xx_tag.h: fix duplicated word
mips: ralink: enable zboot support
MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
MIPS: cpu-probe: introduce exclusive R3k CPU probe
MIPS: cpu-probe: move fpu probing/handling into its own file
MIPS: replace add_memory_region with memblock
MIPS: Loongson64: Clean up numa.c
MIPS: Loongson64: Select SMP in Kconfig to avoid build error
mips: octeon: Add Ubiquiti E200 and E220 boards
MIPS: SGI-IP28: disable use of ll/sc in kernel
MIPS: tx49xx: move tx4939_add_memory_regions into only user
MIPS: pgtable: Remove used PAGE_USERIO define
MIPS: alchemy: Share prom_init implementation
MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
MIPS: process: include exec.h header in process.c
MIPS: process: Add prototype for function arch_dup_task_struct
MIPS: idle: Add prototype for function check_wait
...
Diffstat (limited to 'arch/mips/include')
54 files changed, 92 insertions, 1507 deletions
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 147c9327ce04..aa03b1237155 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -79,8 +79,10 @@ enum ingenic_machine_type { MACH_INGENIC_JZ4775, MACH_INGENIC_JZ4780, MACH_INGENIC_X1000, + MACH_INGENIC_X1000E, MACH_INGENIC_X1830, MACH_INGENIC_X2000, + MACH_INGENIC_X2000E, }; extern char *system_type; @@ -88,13 +90,6 @@ const char *get_system_type(void); extern unsigned long mips_machtype; -#define BOOT_MEM_RAM 1 -#define BOOT_MEM_ROM_DATA 2 -#define BOOT_MEM_RESERVED 3 -#define BOOT_MEM_INIT_RAM 4 -#define BOOT_MEM_NOMAP 5 - -extern void add_memory_region(phys_addr_t start, phys_addr_t size, long type); extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max); extern void prom_init(void); diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 78cf7e300f12..f2e216eef7da 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -171,9 +171,6 @@ #ifndef cpu_has_llsc #define cpu_has_llsc __isa_ge_or_opt(1, MIPS_CPU_LLSC) #endif -#ifndef cpu_has_bp_ghist -#define cpu_has_bp_ghist __opt(MIPS_CPU_BP_GHIST) -#endif #ifndef kernel_uses_llsc #define kernel_uses_llsc cpu_has_llsc #endif diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 388a82f28a87..c9222cc2244f 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -398,7 +398,6 @@ enum cpu_type_enum { #define MIPS_CPU_RW_LLB BIT_ULL(32) /* LLADDR/LLB writes are allowed */ #define MIPS_CPU_LPA BIT_ULL(33) /* CPU supports Large Physical Addressing */ #define MIPS_CPU_CDMM BIT_ULL(34) /* CPU has Common Device Memory Map */ -#define MIPS_CPU_BP_GHIST BIT_ULL(35) /* R12K+ Branch Prediction Global History */ #define MIPS_CPU_SP BIT_ULL(36) /* Small (1KB) page support */ #define MIPS_CPU_FTLB BIT_ULL(37) /* CPU has Fixed-page-size TLB */ #define MIPS_CPU_NAN_LEGACY BIT_ULL(38) /* Legacy NaN implemented */ diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h index 2bf8f6014579..d85248404c52 100644 --- a/arch/mips/include/asm/futex.h +++ b/arch/mips/include/asm/futex.h @@ -21,7 +21,7 @@ #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ { \ - if (cpu_has_llsc && R10000_LLSC_WAR) { \ + if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ @@ -133,7 +133,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, if (!access_ok(uaddr, sizeof(u32))) return -EFAULT; - if (cpu_has_llsc && R10000_LLSC_WAR) { + if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) { __asm__ __volatile__( "# futex_atomic_cmpxchg_inatomic \n" " .set push \n" diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h index 655a6dbc861a..0992cad9c632 100644 --- a/arch/mips/include/asm/idle.h +++ b/arch/mips/include/asm/idle.h @@ -15,6 +15,8 @@ static inline int using_rollback_handler(void) return cpu_wait == r4k_wait; } +extern void __init check_wait(void); + extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); diff --git a/arch/mips/include/asm/llsc.h b/arch/mips/include/asm/llsc.h index c49738bc3bda..ec09fe5d6d6c 100644 --- a/arch/mips/include/asm/llsc.h +++ b/arch/mips/include/asm/llsc.h @@ -28,7 +28,7 @@ * works around a bug present in R10000 CPUs prior to revision 3.0 that could * cause ll-sc sequences to execute non-atomically. */ -#if R10000_LLSC_WAR +#ifdef CONFIG_WAR_R10000_LLSC # define __SC_BEQZ "beqzl " #elif MIPS_ISA_REV >= 6 # define __SC_BEQZ "beqzc " diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h index fef0fda8f82f..ecda7295ddcd 100644 --- a/arch/mips/include/asm/local.h +++ b/arch/mips/include/asm/local.h @@ -31,7 +31,7 @@ static __inline__ long local_add_return(long i, local_t * l) { unsigned long result; - if (kernel_uses_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) { unsigned long temp; __asm__ __volatile__( @@ -80,7 +80,7 @@ static __inline__ long local_sub_return(long i, local_t * l) { unsigned long result; - if (kernel_uses_llsc && R10000_LLSC_WAR) { + if (kernel_uses_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) { unsigned long temp; __asm__ __volatile__( diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h deleted file mode 100644 index 3687a02e692b..000000000000 --- a/arch/mips/include/asm/m48t37.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip - */ -#ifndef _ASM_M48T37_H -#define _ASM_M48T37_H - -#include <linux/spinlock.h> - -extern spinlock_t rtc_lock; - -struct m48t37_rtc { - volatile u8 pad[0x7ff0]; /* NVRAM */ - volatile u8 flags; - volatile u8 century; - volatile u8 alarm_sec; - volatile u8 alarm_min; - volatile u8 alarm_hour; - volatile u8 alarm_data; - volatile u8 interrupts; - volatile u8 watchdog; - volatile u8 control; - volatile u8 sec; - volatile u8 min; - volatile u8 hour; - volatile u8 day; - volatile u8 date; - volatile u8 month; - volatile u8 year; -}; - -#define M48T37_RTC_SET 0x80 -#define M48T37_RTC_STOPPED 0x80 -#define M48T37_RTC_READ 0x40 - -#endif /* _ASM_M48T37_H */ diff --git a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h index ecfbb5aeada3..e6e527224a15 100644 --- a/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-au1x00/cpu-feature-overrides.h @@ -39,7 +39,6 @@ #define cpu_has_guestctl2 0 #define cpu_has_guestid 0 #define cpu_has_drg 0 -#define cpu_has_bp_ghist 0 #define cpu_has_mips16 0 #define cpu_has_mips16e2 0 #define cpu_has_mdmx 0 diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h index d25846a1291f..d16add7ba49d 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1300.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1300.h @@ -120,141 +120,4 @@ static inline int au1300_gpio_getinitlvl(unsigned int gpio) return (v >> gpio) & 1; } -/**********************************************************************/ - -/* Linux gpio framework integration. -* -* 4 use cases of Alchemy GPIOS: -*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: -* Board must register gpiochips. -*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: -* A gpiochip for the 75 GPIOs is registered. -* -*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: -* the boards' gpio.h must provide the linux gpio wrapper functions, -* -*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: -* inlinable gpio functions are provided which enable access to the -* Au1300 gpios only by using the numbers straight out of the data- -* sheets. - -* Cases 1 and 3 are intended for boards which want to provide their own -* GPIO namespace and -operations (i.e. for example you have 8 GPIOs -* which are in part provided by spare Au1300 GPIO pins and in part by -* an external FPGA but you still want them to be accessible in linux -* as gpio0-7. The board can of course use the alchemy_gpioX_* functions -* as required). -*/ - -#ifndef CONFIG_GPIOLIB - -#ifdef CONFIG_ALCHEMY_GPIOINT_AU1300 - -#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */ - -static inline int gpio_direction_input(unsigned int gpio) -{ - return au1300_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned int gpio, int v) -{ - return au1300_gpio_direction_output(gpio, v); -} - -static inline int gpio_get_value(unsigned int gpio) -{ - return au1300_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned int gpio, int v) -{ - au1300_gpio_set_value(gpio, v); -} - -static inline int gpio_get_value_cansleep(unsigned gpio) -{ - return gpio_get_value(gpio); -} - -static inline void gpio_set_value_cansleep(unsigned gpio, int value) -{ - gpio_set_value(gpio, value); -} - -static inline int gpio_is_valid(unsigned int gpio) -{ - return au1300_gpio_is_valid(gpio); -} - -static inline int gpio_cansleep(unsigned int gpio) -{ - return au1300_gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned int gpio) -{ - return au1300_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned int irq) -{ - return au1300_irq_to_gpio(irq); -} - -static inline int gpio_request(unsigned int gpio, const char *label) -{ - return 0; -} - -static inline int gpio_request_one(unsigned gpio, - unsigned long flags, const char *label) -{ - return 0; -} - -static inline int gpio_request_array(struct gpio *array, size_t num) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ -} - -static inline void gpio_free_array(struct gpio *array, size_t num) -{ -} - -static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) -{ - return -ENOSYS; -} - -static inline void gpio_unexport(unsigned gpio) -{ -} - -static inline int gpio_export(unsigned gpio, bool direction_may_change) -{ - return -ENOSYS; -} - -static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) -{ - return -ENOSYS; -} - -static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) -{ - return -ENOSYS; -} - -#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ - -#endif /* CONFIG_ALCHEMY_GPIOINT_AU1300 */ - -#endif /* CONFIG GPIOLIB */ - #endif /* _GPIO_AU1300_H_ */ diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h index d7f1ef246d5c..93817bfb7fb2 100644 --- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h +++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h @@ -10,6 +10,7 @@ #include <linux/bcma/bcma.h> #include <linux/bcma/bcma_soc.h> #include <linux/bcm47xx_nvram.h> +#include <linux/bcm47xx_sprom.h> enum bcm47xx_bus_type { #ifdef CONFIG_BCM47XX_SSB @@ -32,9 +33,6 @@ union bcm47xx_bus { extern union bcm47xx_bus bcm47xx_bus; extern enum bcm47xx_bus_type bcm47xx_bus_type; -void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix, - bool fallback); - void bcm47xx_set_system_type(u16 chip_id); #endif /* __ASM_BCM47XX_H */ diff --git a/arch/mips/include/asm/mach-cavium-octeon/war.h b/arch/mips/include/asm/mach-cavium-octeon/war.h deleted file mode 100644 index 2421411b7636..000000000000 --- a/arch/mips/include/asm/mach-cavium-octeon/war.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - * Copyright (C) 2008 Cavium Networks <support@caviumnetworks.com> - */ -#ifndef __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H -#define __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#define CAVIUM_OCTEON_DCACHE_PREFETCH_WAR \ - OCTEON_IS_MODEL(OCTEON_CN6XXX) - -#endif /* __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H */ diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h index 72ac2c202c55..079889ced4f3 100644 --- a/arch/mips/include/asm/mach-generic/irq.h +++ b/arch/mips/include/asm/mach-generic/irq.h @@ -9,7 +9,7 @@ #define __ASM_MACH_GENERIC_IRQ_H #ifndef NR_IRQS -#define NR_IRQS 128 +#define NR_IRQS 256 #endif #ifdef CONFIG_I8259 diff --git a/arch/mips/include/asm/mach-generic/war.h b/arch/mips/include/asm/mach-generic/war.h deleted file mode 100644 index f0f4a35d0870..000000000000 --- a/arch/mips/include/asm/mach-generic/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MACH_GENERIC_WAR_H -#define __ASM_MACH_GENERIC_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MACH_GENERIC_WAR_H */ diff --git a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ingenic/cpu-feature-overrides.h index 7c5e576f9d96..7c5e576f9d96 100644 --- a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ingenic/cpu-feature-overrides.h diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h deleted file mode 100644 index b48eb4ac362d..000000000000 --- a/arch/mips/include/asm/mach-ip22/war.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_IP22_WAR_H -#define __ASM_MIPS_MACH_IP22_WAR_H - -/* - * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors. - */ - -#define R4600_V1_INDEX_ICACHEOP_WAR 1 -#define R4600_V1_HIT_CACHEOP_WAR 1 -#define R4600_V2_HIT_CACHEOP_WAR 1 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP22_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h deleted file mode 100644 index 82c23ce2afa7..000000000000 --- a/arch/mips/include/asm/mach-ip27/kmalloc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_IP27_KMALLOC_H -#define __ASM_MACH_IP27_KMALLOC_H - -/* - * All happy, no need to define ARCH_DMA_MINALIGN - */ - -#endif /* __ASM_MACH_IP27_KMALLOC_H */ diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h deleted file mode 100644 index ef3efce0094a..000000000000 --- a/arch/mips/include/asm/mach-ip27/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_IP27_WAR_H -#define __ASM_MIPS_MACH_IP27_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 1 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP27_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h index ba8b4e30b3e2..613bbc10c1f2 100644 --- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h @@ -25,7 +25,7 @@ #define cpu_has_mcheck 0 #define cpu_has_ejtag 0 -#define cpu_has_llsc 1 +#define cpu_has_llsc 0 #define cpu_has_vtag_icache 0 #define cpu_has_dc_aliases 0 /* see probe_pcache() */ #define cpu_has_ic_fills_f_dc 0 diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h deleted file mode 100644 index 61cd67354829..000000000000 --- a/arch/mips/include/asm/mach-ip28/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_IP28_WAR_H -#define __ASM_MIPS_MACH_IP28_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 1 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP28_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip30/irq.h b/arch/mips/include/asm/mach-ip30/irq.h deleted file mode 100644 index 27ba899c95be..000000000000 --- a/arch/mips/include/asm/mach-ip30/irq.h +++ /dev/null @@ -1,87 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * HEART IRQ defines - * - * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de> - * 2014-2016 Joshua Kinard <kumba@gentoo.org> - * - */ - -#ifndef __ASM_MACH_IP30_IRQ_H -#define __ASM_MACH_IP30_IRQ_H - -/* - * HEART has 64 hardware interrupts, but use 128 to leave room for a few - * software interrupts as well (such as the CPU timer interrupt. - */ -#define NR_IRQS 128 - -extern void __init ip30_install_ipi(void); - -/* - * HEART has 64 interrupt vectors available to it, subdivided into five - * priority levels. They are numbered 0 to 63. - */ -#define HEART_NUM_IRQS 64 - -/* - * These are the five interrupt priority levels and their corresponding - * CPU IPx interrupt pins. - * - * Level 4 - Error Interrupts. - * Level 3 - HEART timer interrupt. - * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts. - * Level 1 - General device interrupts. - * Level 0 - General device GFX flow control interrupts. - */ -#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */ -#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */ -#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */ -#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */ -#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */ - -/* HEART L0 Interrupts (Low Priority) */ -#define HEART_L0_INT_GENERIC 0 -#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1 -#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2 - -/* HEART L2 Interrupts (High Priority) */ -#define HEART_L2_INT_RESCHED_CPU_0 46 -#define HEART_L2_INT_RESCHED_CPU_1 47 -#define HEART_L2_INT_CALL_CPU_0 48 -#define HEART_L2_INT_CALL_CPU_1 49 - -/* HEART L3 Interrupts (Compare/Counter Timer) */ -#define HEART_L3_INT_TIMER 50 - -/* HEART L4 Interrupts (Errors) */ -#define HEART_L4_INT_XWID_ERR_9 51 -#define HEART_L4_INT_XWID_ERR_A 52 -#define HEART_L4_INT_XWID_ERR_B 53 -#define HEART_L4_INT_XWID_ERR_C 54 -#define HEART_L4_INT_XWID_ERR_D 55 -#define HEART_L4_INT_XWID_ERR_E 56 -#define HEART_L4_INT_XWID_ERR_F 57 -#define HEART_L4_INT_XWID_ERR_XBOW 58 -#define HEART_L4_INT_CPU_BUS_ERR_0 59 -#define HEART_L4_INT_CPU_BUS_ERR_1 60 -#define HEART_L4_INT_CPU_BUS_ERR_2 61 -#define HEART_L4_INT_CPU_BUS_ERR_3 62 -#define HEART_L4_INT_HEART_EXCP 63 - -/* - * Power Switch is wired via BaseIO BRIDGE slot #6. - * - * ACFail is wired via BaseIO BRIDGE slot #7. - */ -#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN - -#include <asm/mach-generic/irq.h> - -#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2) -#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3) -#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4) -#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5) -#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6) - -#endif /* __ASM_MACH_IP30_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ip30/war.h b/arch/mips/include/asm/mach-ip30/war.h deleted file mode 100644 index a1fa0c1f5300..000000000000 --- a/arch/mips/include/asm/mach-ip30/war.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_IP30_WAR_H -#define __ASM_MIPS_MACH_IP30_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#ifdef CONFIG_CPU_R10000 -#define R10000_LLSC_WAR 1 -#else -#define R10000_LLSC_WAR 0 -#endif -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP30_WAR_H */ diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h deleted file mode 100644 index e77b9d1b6c96..000000000000 --- a/arch/mips/include/asm/mach-ip32/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_IP32_WAR_H -#define __ASM_MIPS_MACH_IP32_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_IP32_WAR_H */ diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h deleted file mode 100644 index 27c543bd340f..000000000000 --- a/arch/mips/include/asm/mach-jz4740/irq.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 IRQ definitions - */ - -#ifndef __ASM_MACH_JZ4740_IRQ_H__ -#define __ASM_MACH_JZ4740_IRQ_H__ - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 256 - -#endif diff --git a/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h b/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h deleted file mode 100644 index 00d602629a55..000000000000 --- a/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_LOONGSON2EF_MC146818RTC_H -#define __ASM_MACH_LOONGSON2EF_MC146818RTC_H - -#include <linux/io.h> - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - return inb_p(RTC_PORT(1)); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - outb_p(data, RTC_PORT(1)); -} - -#define RTC_ALWAYS_BCD 0 - -#ifndef mc146818_decode_year -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) -#endif - -#endif /* __ASM_MACH_LOONGSON2EF_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h index bf2480923154..98ea977cf0b8 100644 --- a/arch/mips/include/asm/mach-loongson64/irq.h +++ b/arch/mips/include/asm/mach-loongson64/irq.h @@ -5,7 +5,8 @@ /* cpu core interrupt numbers */ #define NR_IRQS_LEGACY 16 #define NR_MIPS_CPU_IRQS 8 -#define NR_IRQS (NR_IRQS_LEGACY + NR_MIPS_CPU_IRQS + 256) +#define NR_MAX_CHAINED_IRQS 40 /* Chained IRQs means those not directly used by devices */ +#define NR_IRQS (NR_IRQS_LEGACY + NR_MIPS_CPU_IRQS + NR_MAX_CHAINED_IRQS + 256) #define MIPS_CPU_IRQ_BASE NR_IRQS_LEGACY diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h index 5eaca4fe3f92..ebb1deaa77b9 100644 --- a/arch/mips/include/asm/mach-loongson64/mmzone.h +++ b/arch/mips/include/asm/mach-loongson64/mmzone.h @@ -10,13 +10,9 @@ #define _ASM_MACH_LOONGSON64_MMZONE_H #define NODE_ADDRSPACE_SHIFT 44 -#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL -#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL -#define NODE2_ADDRSPACE_OFFSET 0x200000000000UL -#define NODE3_ADDRSPACE_OFFSET 0x300000000000UL #define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT) -#define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT) +#define nid_to_addrbase(nid) ((unsigned long)(nid) << NODE_ADDRSPACE_SHIFT) extern struct pglist_data *__node_data[]; diff --git a/arch/mips/include/asm/mach-malta/malta-dtshim.h b/arch/mips/include/asm/mach-malta/malta-dtshim.h deleted file mode 100644 index 7c97b710121d..000000000000 --- a/arch/mips/include/asm/mach-malta/malta-dtshim.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2015 Imagination Technologies - * Author: Paul Burton <paul.burton@mips.com> - */ - -#ifndef __MIPS_MALTA_DTSHIM_H__ -#define __MIPS_MALTA_DTSHIM_H__ - -#include <linux/init.h> - -#ifdef CONFIG_MIPS_MALTA - -extern void __init *malta_dt_shim(void *fdt); - -#else /* !CONFIG_MIPS_MALTA */ - -static inline void *malta_dt_shim(void *fdt) -{ - return fdt; -} - -#endif /* !CONFIG_MIPS_MALTA */ - -#endif /* __MIPS_MALTA_DTSHIM_H__ */ diff --git a/arch/mips/include/asm/mach-malta/malta-pm.h b/arch/mips/include/asm/mach-malta/malta-pm.h deleted file mode 100644 index 2a5146d79313..000000000000 --- a/arch/mips/include/asm/mach-malta/malta-pm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2014 Imagination Technologies - * Author: Paul Burton <paul.burton@mips.com> - */ - -#ifndef __ASM_MIPS_MACH_MALTA_PM_H__ -#define __ASM_MIPS_MACH_MALTA_PM_H__ - -#include <asm/mips-boards/piix4.h> - -#ifdef CONFIG_MIPS_MALTA_PM - -/** - * mips_pm_suspend - enter a suspend state - * @state: the state to enter, one of PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_* - * - * Enters a suspend state via the Malta's PIIX4. If the state to be entered - * is one which loses context (eg. SOFF) then this function will never - * return. - */ -extern int mips_pm_suspend(unsigned state); - -#else /* !CONFIG_MIPS_MALTA_PM */ - -static inline int mips_pm_suspend(unsigned state) -{ - return -EINVAL; -} - -#endif /* !CONFIG_MIPS_MALTA_PM */ - -#endif /* __ASM_MIPS_MACH_MALTA_PM_H__ */ diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h deleted file mode 100644 index d62d2ffe515e..000000000000 --- a/arch/mips/include/asm/mach-malta/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_MIPS_WAR_H -#define __ASM_MIPS_MACH_MIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 1 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h deleted file mode 100644 index 23ecf816daa7..000000000000 --- a/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2013 Cavium, Inc. - */ -#ifndef __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_tx39_cache 0 -#define cpu_has_counter 1 -#define cpu_has_llsc 1 -/* - * We Disable LL/SC on non SMP systems as it is faster to disable - * interrupts for atomic access than a LL/SC. - */ -#ifdef CONFIG_SMP -# define kernel_uses_llsc 1 -#else -# define kernel_uses_llsc 0 -#endif - -#ifdef CONFIG_CPU_CAVIUM_OCTEON -#define cpu_dcache_line_size() 128 -#define cpu_icache_line_size() 128 -#define cpu_has_octeon_cache 1 -#define cpu_has_4k_cache 0 -#else -#define cpu_has_4k_cache 1 -#endif - -#endif /* __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-paravirt/irq.h b/arch/mips/include/asm/mach-paravirt/irq.h deleted file mode 100644 index 9b4d35eca977..000000000000 --- a/arch/mips/include/asm/mach-paravirt/irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2013 Cavium, Inc. - */ -#ifndef __ASM_MACH_PARAVIRT_IRQ_H__ -#define __ASM_MACH_PARAVIRT_IRQ_H__ - -#define NR_IRQS 64 -#define MIPS_CPU_IRQ_BASE 1 - -#define MIPS_IRQ_PCIA (MIPS_CPU_IRQ_BASE + 8) - -#define MIPS_IRQ_MBOX0 (MIPS_CPU_IRQ_BASE + 32) -#define MIPS_IRQ_MBOX1 (MIPS_CPU_IRQ_BASE + 33) - -#endif /* __ASM_MACH_PARAVIRT_IRQ_H__ */ diff --git a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h b/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h deleted file mode 100644 index c9f5769dfc8f..000000000000 --- a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2013 Cavium, Inc - */ -#ifndef __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H -#define __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H - -#define CP0_EBASE $15, 1 - - .macro kernel_entry_setup -#ifdef CONFIG_SMP - mfc0 t0, CP0_EBASE - andi t0, t0, 0x3ff # CPUNum - beqz t0, 1f - # CPUs other than zero goto smp_bootstrap - j smp_bootstrap -#endif /* CONFIG_SMP */ - -1: - .endm - -/* - * Do SMP slave processor setup necessary before we can safely execute - * C code. - */ - .macro smp_slave_setup - mfc0 t0, CP0_EBASE - andi t0, t0, 0x3ff # CPUNum - slti t1, t0, NR_CPUS - bnez t1, 1f -2: - di - wait - b 2b # Unknown CPU, loop forever. -1: - PTR_LA t1, paravirt_smp_sp - PTR_SLL t0, PTR_SCALESHIFT - PTR_ADDU t1, t1, t0 -3: - PTR_L sp, 0(t1) - beqz sp, 3b # Spin until told to proceed. - - PTR_LA t1, paravirt_smp_gp - PTR_ADDU t1, t1, t0 - sync - PTR_L gp, 0(t1) - .endm - -#endif /* __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h deleted file mode 100644 index 85b5b8e26118..000000000000 --- a/arch/mips/include/asm/mach-pnx833x/gpio.h +++ /dev/null @@ -1,159 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * gpio.h: GPIO Support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - */ -#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H -#define __ASM_MIPS_MACH_PNX833X_GPIO_H - -/* BIG FAT WARNING: races danger! - No protections exist here. Current users are only early init code, - when locking is not needed because no concurrency yet exists there, - and GPIO IRQ dispatcher, which does locking. - However, if many uses will ever happen, proper locking will be needed - - including locking between different uses -*/ - -#include <asm/mach-pnx833x/pnx833x.h> - -#define SET_REG_BIT(reg, bit) do { (reg |= (1 << (bit))); } while (0) -#define CLEAR_REG_BIT(reg, bit) do { (reg &= ~(1 << (bit))); } while (0) - -/* Initialize GPIO to a known state */ -static inline void pnx833x_gpio_init(void) -{ - PNX833X_PIO_DIR = 0; - PNX833X_PIO_DIR2 = 0; - PNX833X_PIO_SEL = 0; - PNX833X_PIO_SEL2 = 0; - PNX833X_PIO_INT_EDGE = 0; - PNX833X_PIO_INT_HI = 0; - PNX833X_PIO_INT_LO = 0; - - /* clear any GPIO interrupt requests */ - PNX833X_PIO_INT_CLEAR = 0xffff; - PNX833X_PIO_INT_CLEAR = 0; - PNX833X_PIO_INT_ENABLE = 0; -} - -/* Select GPIO direction for a pin */ -static inline void pnx833x_gpio_select_input(unsigned int pin) -{ - if (pin < 32) - CLEAR_REG_BIT(PNX833X_PIO_DIR, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31); -} -static inline void pnx833x_gpio_select_output(unsigned int pin) -{ - if (pin < 32) - SET_REG_BIT(PNX833X_PIO_DIR, pin); - else - SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31); -} - -/* Select GPIO or alternate function for a pin */ -static inline void pnx833x_gpio_select_function_io(unsigned int pin) -{ - if (pin < 32) - CLEAR_REG_BIT(PNX833X_PIO_SEL, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31); -} -static inline void pnx833x_gpio_select_function_alt(unsigned int pin) -{ - if (pin < 32) - SET_REG_BIT(PNX833X_PIO_SEL, pin); - else - SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31); -} - -/* Read GPIO pin */ -static inline int pnx833x_gpio_read(unsigned int pin) -{ - if (pin < 32) - return (PNX833X_PIO_IN >> pin) & 1; - else - return (PNX833X_PIO_IN2 >> (pin & 31)) & 1; -} - -/* Write GPIO pin */ -static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin) -{ - if (pin < 32) { - if (val) - SET_REG_BIT(PNX833X_PIO_OUT, pin); - else - CLEAR_REG_BIT(PNX833X_PIO_OUT, pin); - } else { - if (val) - SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31); - else - CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31); - } -} - -/* Configure GPIO interrupt */ -#define GPIO_INT_NONE 0 -#define GPIO_INT_LEVEL_LOW 1 -#define GPIO_INT_LEVEL_HIGH 2 -#define GPIO_INT_EDGE_RISING 3 -#define GPIO_INT_EDGE_FALLING 4 -#define GPIO_INT_EDGE_BOTH 5 -static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin) -{ - switch (when) { - case GPIO_INT_LEVEL_LOW: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_LEVEL_HIGH: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_RISING: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_FALLING: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - case GPIO_INT_EDGE_BOTH: - SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - SET_REG_BIT(PNX833X_PIO_INT_HI, pin); - SET_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - default: - CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin); - break; - } -} - -/* Enable/disable GPIO interrupt */ -static inline void pnx833x_gpio_enable_irq(unsigned int pin) -{ - SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); -} -static inline void pnx833x_gpio_disable_irq(unsigned int pin) -{ - CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin); -} - -/* Clear GPIO interrupt request */ -static inline void pnx833x_gpio_clear_irq(unsigned int pin) -{ - SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); - CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin); -} - -#endif diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h deleted file mode 100644 index 32d8063c1bbc..000000000000 --- a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h +++ /dev/null @@ -1,112 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ - -/* - * irq.h: IRQ mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - */ - -#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H -#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H -/* - * The "IRQ numbers" are completely virtual. - * - * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. - * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, - * numbers 49..64 for (virtual) GPIO interrupts. - * - * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, - * connected to PIC, which uses core hardware interrupt 2, and also - * a timer interrupt through hardware interrupt 5. - * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, - * numbers 65..80 for (virtual) GPIO interrupts. - * - */ -#include <irq.h> - -#define PNX833X_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) - -/* Interrupts supported by PIC */ -#define PNX833X_PIC_I2C0_INT (PNX833X_PIC_IRQ_BASE + 1) -#define PNX833X_PIC_I2C1_INT (PNX833X_PIC_IRQ_BASE + 2) -#define PNX833X_PIC_UART0_INT (PNX833X_PIC_IRQ_BASE + 3) -#define PNX833X_PIC_UART1_INT (PNX833X_PIC_IRQ_BASE + 4) -#define PNX833X_PIC_TS_IN0_DV_INT (PNX833X_PIC_IRQ_BASE + 5) -#define PNX833X_PIC_TS_IN0_DMA_INT (PNX833X_PIC_IRQ_BASE + 6) -#define PNX833X_PIC_GPIO_INT (PNX833X_PIC_IRQ_BASE + 7) -#define PNX833X_PIC_AUDIO_DEC_INT (PNX833X_PIC_IRQ_BASE + 8) -#define PNX833X_PIC_VIDEO_DEC_INT (PNX833X_PIC_IRQ_BASE + 9) -#define PNX833X_PIC_CONFIG_INT (PNX833X_PIC_IRQ_BASE + 10) -#define PNX833X_PIC_AOI_INT (PNX833X_PIC_IRQ_BASE + 11) -#define PNX833X_PIC_SYNC_INT (PNX833X_PIC_IRQ_BASE + 12) -#define PNX8330_PIC_SPU_INT (PNX833X_PIC_IRQ_BASE + 13) -#define PNX8335_PIC_SATA_INT (PNX833X_PIC_IRQ_BASE + 13) -#define PNX833X_PIC_OSD_INT (PNX833X_PIC_IRQ_BASE + 14) -#define PNX833X_PIC_DISP1_INT (PNX833X_PIC_IRQ_BASE + 15) -#define PNX833X_PIC_DEINTERLACER_INT (PNX833X_PIC_IRQ_BASE + 16) -#define PNX833X_PIC_DISPLAY2_INT (PNX833X_PIC_IRQ_BASE + 17) -#define PNX833X_PIC_VC_INT (PNX833X_PIC_IRQ_BASE + 18) -#define PNX833X_PIC_SC_INT (PNX833X_PIC_IRQ_BASE + 19) -#define PNX833X_PIC_IDE_INT (PNX833X_PIC_IRQ_BASE + 20) -#define PNX833X_PIC_IDE_DMA_INT (PNX833X_PIC_IRQ_BASE + 21) -#define PNX833X_PIC_TS_IN1_DV_INT (PNX833X_PIC_IRQ_BASE + 22) -#define PNX833X_PIC_TS_IN1_DMA_INT (PNX833X_PIC_IRQ_BASE + 23) -#define PNX833X_PIC_SGDX_DMA_INT (PNX833X_PIC_IRQ_BASE + 24) -#define PNX833X_PIC_TS_OUT_INT (PNX833X_PIC_IRQ_BASE + 25) -#define PNX833X_PIC_IR_INT (PNX833X_PIC_IRQ_BASE + 26) -#define PNX833X_PIC_VMSP1_INT (PNX833X_PIC_IRQ_BASE + 27) -#define PNX833X_PIC_VMSP2_INT (PNX833X_PIC_IRQ_BASE + 28) -#define PNX833X_PIC_PIBC_INT (PNX833X_PIC_IRQ_BASE + 29) -#define PNX833X_PIC_TS_IN0_TRD_INT (PNX833X_PIC_IRQ_BASE + 30) -#define PNX833X_PIC_SGDX_TPD_INT (PNX833X_PIC_IRQ_BASE + 31) -#define PNX833X_PIC_USB_INT (PNX833X_PIC_IRQ_BASE + 32) -#define PNX833X_PIC_TS_IN1_TRD_INT (PNX833X_PIC_IRQ_BASE + 33) -#define PNX833X_PIC_CLOCK_INT (PNX833X_PIC_IRQ_BASE + 34) -#define PNX833X_PIC_SGDX_PARSER_INT (PNX833X_PIC_IRQ_BASE + 35) -#define PNX833X_PIC_VMSP_DMA_INT (PNX833X_PIC_IRQ_BASE + 36) - -#if defined(CONFIG_SOC_PNX8335) -#define PNX8335_PIC_MIU_INT (PNX833X_PIC_IRQ_BASE + 37) -#define PNX8335_PIC_AVCHIP_IRQ_INT (PNX833X_PIC_IRQ_BASE + 38) -#define PNX8335_PIC_SYNC_HD_INT (PNX833X_PIC_IRQ_BASE + 39) -#define PNX8335_PIC_DISP_HD_INT (PNX833X_PIC_IRQ_BASE + 40) -#define PNX8335_PIC_DISP_SCALER_INT (PNX833X_PIC_IRQ_BASE + 41) -#define PNX8335_PIC_OSD_HD1_INT (PNX833X_PIC_IRQ_BASE + 42) -#define PNX8335_PIC_DTL_WRITER_Y_INT (PNX833X_PIC_IRQ_BASE + 43) -#define PNX8335_PIC_DTL_WRITER_C_INT (PNX833X_PIC_IRQ_BASE + 44) -#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT (PNX833X_PIC_IRQ_BASE + 45) -#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT (PNX833X_PIC_IRQ_BASE + 46) -#define PNX8335_PIC_DENC_TTX_INT (PNX833X_PIC_IRQ_BASE + 47) -#define PNX8335_PIC_MMI_SIF0_INT (PNX833X_PIC_IRQ_BASE + 48) -#define PNX8335_PIC_MMI_SIF1_INT (PNX833X_PIC_IRQ_BASE + 49) -#define PNX8335_PIC_MMI_CDMMU_INT (PNX833X_PIC_IRQ_BASE + 50) -#define PNX8335_PIC_PIBCS_INT (PNX833X_PIC_IRQ_BASE + 51) -#define PNX8335_PIC_ETHERNET_INT (PNX833X_PIC_IRQ_BASE + 52) -#define PNX8335_PIC_VMSP1_0_INT (PNX833X_PIC_IRQ_BASE + 53) -#define PNX8335_PIC_VMSP1_1_INT (PNX833X_PIC_IRQ_BASE + 54) -#define PNX8335_PIC_VMSP1_DMA_INT (PNX833X_PIC_IRQ_BASE + 55) -#define PNX8335_PIC_TDGR_DE_INT (PNX833X_PIC_IRQ_BASE + 56) -#define PNX8335_PIC_IR1_IRQ_INT (PNX833X_PIC_IRQ_BASE + 57) -#endif - -/* GPIO interrupts */ -#define PNX833X_GPIO_0_INT (PNX833X_GPIO_IRQ_BASE + 0) -#define PNX833X_GPIO_1_INT (PNX833X_GPIO_IRQ_BASE + 1) -#define PNX833X_GPIO_2_INT (PNX833X_GPIO_IRQ_BASE + 2) -#define PNX833X_GPIO_3_INT (PNX833X_GPIO_IRQ_BASE + 3) -#define PNX833X_GPIO_4_INT (PNX833X_GPIO_IRQ_BASE + 4) -#define PNX833X_GPIO_5_INT (PNX833X_GPIO_IRQ_BASE + 5) -#define PNX833X_GPIO_6_INT (PNX833X_GPIO_IRQ_BASE + 6) -#define PNX833X_GPIO_7_INT (PNX833X_GPIO_IRQ_BASE + 7) -#define PNX833X_GPIO_8_INT (PNX833X_GPIO_IRQ_BASE + 8) -#define PNX833X_GPIO_9_INT (PNX833X_GPIO_IRQ_BASE + 9) -#define PNX833X_GPIO_10_INT (PNX833X_GPIO_IRQ_BASE + 10) -#define PNX833X_GPIO_11_INT (PNX833X_GPIO_IRQ_BASE + 11) -#define PNX833X_GPIO_12_INT (PNX833X_GPIO_IRQ_BASE + 12) -#define PNX833X_GPIO_13_INT (PNX833X_GPIO_IRQ_BASE + 13) -#define PNX833X_GPIO_14_INT (PNX833X_GPIO_IRQ_BASE + 14) -#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15) - -#endif diff --git a/arch/mips/include/asm/mach-pnx833x/irq.h b/arch/mips/include/asm/mach-pnx833x/irq.h deleted file mode 100644 index b7a6dab5b9f7..000000000000 --- a/arch/mips/include/asm/mach-pnx833x/irq.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * irq.h: IRQ mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - */ - -#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H -#define __ASM_MIPS_MACH_PNX833X_IRQ_H -/* - * The "IRQ numbers" are completely virtual. - * - * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48. - * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt, - * numbers 49..64 for (virtual) GPIO interrupts. - * - * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57, - * connected to PIC, which uses core hardware interrupt 2, and also - * a timer interrupt through hardware interrupt 5. - * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt, - * numbers 65..80 for (virtual) GPIO interrupts. - * - */ -#if defined(CONFIG_SOC_PNX8335) - #define PNX833X_PIC_NUM_IRQ 58 -#else - #define PNX833X_PIC_NUM_IRQ 37 -#endif - -#define MIPS_CPU_NUM_IRQ 8 -#define PNX833X_GPIO_NUM_IRQ 16 - -#define MIPS_CPU_IRQ_BASE 0 -#define PNX833X_PIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ) -#define PNX833X_GPIO_IRQ_BASE (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ) -#define NR_IRQS (MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ) - -#endif diff --git a/arch/mips/include/asm/mach-pnx833x/pnx833x.h b/arch/mips/include/asm/mach-pnx833x/pnx833x.h deleted file mode 100644 index 00bb67a36386..000000000000 --- a/arch/mips/include/asm/mach-pnx833x/pnx833x.h +++ /dev/null @@ -1,189 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * pnx833x.h: Register mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - */ -#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H -#define __ASM_MIPS_MACH_PNX833X_PNX833X_H - -/* All regs are accessed in KSEG1 */ -#define PNX833X_BASE (0xa0000000ul + 0x17E00000ul) - -#define PNX833X_REG(offs) (*((volatile unsigned long *)(PNX833X_BASE + offs))) - -/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */ - -/* Read access to multibit fields */ -#define PNX833X_BIT(val, reg, field) ((val) & PNX833X_##reg##_##field) -#define PNX833X_REGBIT(reg, field) PNX833X_BIT(PNX833X_##reg, reg, field) - -/* Use PNX833X_FIELD to extract a field from val */ -#define PNX_FIELD(cpu, val, reg, field) \ - (((val) & PNX##cpu##_##reg##_##field##_MASK) >> \ - PNX##cpu##_##reg##_##field##_SHIFT) -#define PNX833X_FIELD(val, reg, field) PNX_FIELD(833X, val, reg, field) -#define PNX8330_FIELD(val, reg, field) PNX_FIELD(8330, val, reg, field) -#define PNX8335_FIELD(val, reg, field) PNX_FIELD(8335, val, reg, field) - -/* Use PNX833X_REGFIELD to extract a field from a register */ -#define PNX833X_REGFIELD(reg, field) PNX833X_FIELD(PNX833X_##reg, reg, field) -#define PNX8330_REGFIELD(reg, field) PNX8330_FIELD(PNX8330_##reg, reg, field) -#define PNX8335_REGFIELD(reg, field) PNX8335_FIELD(PNX8335_##reg, reg, field) - - -#define PNX_WRITEFIELD(cpu, val, reg, field) \ - (PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \ - ((val) << PNX##cpu##_##reg##_##field##_SHIFT)) -#define PNX833X_WRITEFIELD(val, reg, field) \ - PNX_WRITEFIELD(833X, val, reg, field) -#define PNX8330_WRITEFIELD(val, reg, field) \ - PNX_WRITEFIELD(8330, val, reg, field) -#define PNX8335_WRITEFIELD(val, reg, field) \ - PNX_WRITEFIELD(8335, val, reg, field) - - -/* Macros to detect CPU type */ - -#define PNX833X_CONFIG_MODULE_ID PNX833X_REG(0x7FFC) -#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK 0x0000f000 -#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT 12 -#define PNX8330_CONFIG_MODULE_MAJREV 4 -#define PNX8335_CONFIG_MODULE_MAJREV 5 -#define CPU_IS_PNX8330 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ - PNX8330_CONFIG_MODULE_MAJREV) -#define CPU_IS_PNX8335 (PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \ - PNX8335_CONFIG_MODULE_MAJREV) - - - -#define PNX833X_RESET_CONTROL PNX833X_REG(0x8004) -#define PNX833X_RESET_CONTROL_2 PNX833X_REG(0x8014) - -#define PNX833X_PIC_REG(offs) PNX833X_REG(0x01000 + (offs)) -#define PNX833X_PIC_INT_PRIORITY PNX833X_PIC_REG(0x0) -#define PNX833X_PIC_INT_SRC PNX833X_PIC_REG(0x4) -#define PNX833X_PIC_INT_SRC_INT_SRC_MASK 0x00000FF8ul /* bits 11:3 */ -#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT 3 -#define PNX833X_PIC_INT_REG(irq) PNX833X_PIC_REG(0x10 + 4*(irq)) - -#define PNX833X_CLOCK_CPUCP_CTL PNX833X_REG(0x9228) -#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET 0x00000002ul /* bit 1 */ -#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK 0x00000018ul /* bits 4:3 */ -#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT 3 - -#define PNX8335_CLOCK_PLL_CPU_CTL PNX833X_REG(0x9020) -#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK 0x1f -#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT 0 - -#define PNX833X_CONFIG_MUX PNX833X_REG(0x7004) -#define PNX833X_CONFIG_MUX_IDE_MUX 0x00000080 /* bit 7 */ - -#define PNX8330_CONFIG_POLYFUSE_7 PNX833X_REG(0x7040) -#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK 0x00180000 -#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT 19 - -#define PNX833X_PIO_IN PNX833X_REG(0xF000) -#define PNX833X_PIO_OUT PNX833X_REG(0xF004) -#define PNX833X_PIO_DIR PNX833X_REG(0xF008) -#define PNX833X_PIO_SEL PNX833X_REG(0xF014) -#define PNX833X_PIO_INT_EDGE PNX833X_REG(0xF020) -#define PNX833X_PIO_INT_HI PNX833X_REG(0xF024) -#define PNX833X_PIO_INT_LO PNX833X_REG(0xF028) -#define PNX833X_PIO_INT_STATUS PNX833X_REG(0xFFE0) -#define PNX833X_PIO_INT_ENABLE PNX833X_REG(0xFFE4) -#define PNX833X_PIO_INT_CLEAR PNX833X_REG(0xFFE8) -#define PNX833X_PIO_IN2 PNX833X_REG(0xF05C) -#define PNX833X_PIO_OUT2 PNX833X_REG(0xF060) -#define PNX833X_PIO_DIR2 PNX833X_REG(0xF064) -#define PNX833X_PIO_SEL2 PNX833X_REG(0xF068) - -#define PNX833X_UART0_PORTS_START (PNX833X_BASE + 0xB000) -#define PNX833X_UART0_PORTS_END (PNX833X_BASE + 0xBFFF) -#define PNX833X_UART1_PORTS_START (PNX833X_BASE + 0xC000) -#define PNX833X_UART1_PORTS_END (PNX833X_BASE + 0xCFFF) - -#define PNX833X_USB_PORTS_START (PNX833X_BASE + 0x19000) -#define PNX833X_USB_PORTS_END (PNX833X_BASE + 0x19FFF) - -#define PNX833X_CONFIG_USB PNX833X_REG(0x7008) - -#define PNX833X_I2C0_PORTS_START (PNX833X_BASE + 0xD000) -#define PNX833X_I2C0_PORTS_END (PNX833X_BASE + 0xDFFF) -#define PNX833X_I2C1_PORTS_START (PNX833X_BASE + 0xE000) -#define PNX833X_I2C1_PORTS_END (PNX833X_BASE + 0xEFFF) - -#define PNX833X_IDE_PORTS_START (PNX833X_BASE + 0x1A000) -#define PNX833X_IDE_PORTS_END (PNX833X_BASE + 0x1AFFF) -#define PNX833X_IDE_MODULE_ID PNX833X_REG(0x1AFFC) - -#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 -#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT 16 -#define PNX833X_IDE_MODULE_ID_VALUE 0xA009 - - -#define PNX833X_MIU_SEL0 PNX833X_REG(0x2004) -#define PNX833X_MIU_SEL0_TIMING PNX833X_REG(0x2008) -#define PNX833X_MIU_SEL1 PNX833X_REG(0x200C) -#define PNX833X_MIU_SEL1_TIMING PNX833X_REG(0x2010) -#define PNX833X_MIU_SEL2 PNX833X_REG(0x2014) -#define PNX833X_MIU_SEL2_TIMING PNX833X_REG(0x2018) -#define PNX833X_MIU_SEL3 PNX833X_REG(0x201C) -#define PNX833X_MIU_SEL3_TIMING PNX833X_REG(0x2020) - -#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK (1 << 14) -#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT 14 - -#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK (1 << 7) -#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT 7 - -#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK (0xF << 9) -#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT 9 - -#define PNX833X_MIU_CONFIG_SPI PNX833X_REG(0x2000) - -#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK (0xFF << 3) -#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT 3 - -#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK (1 << 2) -#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT 2 - -#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK (1 << 1) -#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT 1 - -#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK (1 << 0) -#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT 0 - -#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \ - (PNX833X_MIU_CONFIG_SPI = \ - ((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) | \ - ((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) | \ - ((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) | \ - ((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT)) - -#define PNX8335_IP3902_PORTS_START (PNX833X_BASE + 0x2F000) -#define PNX8335_IP3902_PORTS_END (PNX833X_BASE + 0x2FFFF) -#define PNX8335_IP3902_MODULE_ID PNX833X_REG(0x2FFFC) - -#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 -#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT 16 -#define PNX8335_IP3902_MODULE_ID_VALUE 0x3902 - - /* I/O location(gets remapped)*/ -#define PNX8335_NAND_BASE 0x18000000 -/* I/O location with CLE high */ -#define PNX8335_NAND_CLE_MASK 0x00100000 -/* I/O location with ALE high */ -#define PNX8335_NAND_ALE_MASK 0x00010000 - -#define PNX8335_SATA_PORTS_START (PNX833X_BASE + 0x2E000) -#define PNX8335_SATA_PORTS_END (PNX833X_BASE + 0x2EFFF) -#define PNX8335_SATA_MODULE_ID PNX833X_REG(0x2EFFC) - -#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK 0xFFFF0000 -#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT 16 -#define PNX8335_SATA_MODULE_ID_VALUE 0xA099 - -#endif diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h deleted file mode 100644 index af430d26f713..000000000000 --- a/arch/mips/include/asm/mach-rc32434/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_MIPS_WAR_H -#define __ASM_MIPS_MACH_MIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h deleted file mode 100644 index eca16d167c2f..000000000000 --- a/arch/mips/include/asm/mach-rm/war.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_RM_WAR_H -#define __ASM_MIPS_MACH_RM_WAR_H - -/* - * The RM200C seems to have been shipped only with V2.0 R4600s - */ - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 1 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_RM_WAR_H */ diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h deleted file mode 100644 index 4755b6116807..000000000000 --- a/arch/mips/include/asm/mach-sibyte/war.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H -#define __ASM_MIPS_MACH_SIBYTE_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 - -#if defined(CONFIG_SB1_PASS_2_WORKAROUNDS) - -#ifndef __ASSEMBLY__ -extern int sb1250_m3_workaround_needed(void); -#endif - -#define BCM1250_M3_WAR sb1250_m3_workaround_needed() -#define SIBYTE_1956_WAR 1 - -#else - -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 - -#endif - -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */ diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h deleted file mode 100644 index 445abb4eb769..000000000000 --- a/arch/mips/include/asm/mach-tx49xx/war.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H -#define __ASM_MIPS_MACH_TX49XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 1 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */ diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h index 65de4fb06096..254be3d62519 100644 --- a/arch/mips/include/asm/mips-boards/malta.h +++ b/arch/mips/include/asm/mips-boards/malta.h @@ -92,4 +92,6 @@ static inline unsigned long get_msc_port_base(unsigned long reg) #define MALTA_JMPRS_REG 0x1f000210 +extern void __init *malta_dt_shim(void *fdt); + #endif /* __ASM_MIPS_BOARDS_MALTA_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 4ddc12e4444a..a0e8ae5497b6 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -389,6 +389,13 @@ #define ST0_CU3 0x80000000 #define ST0_XX 0x80000000 /* MIPS IV naming */ +/* in-kernel enabled CUs */ +#ifdef CONFIG_CPU_LOONGSON64 +#define ST0_KERNEL_CUMASK (ST0_CU0 | ST0_CU2) +#else +#define ST0_KERNEL_CUMASK ST0_CU0 +#endif + /* * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2) */ @@ -1706,12 +1713,6 @@ do { \ #define read_c0_count() __read_32bit_c0_register($9, 0) #define write_c0_count(val) __write_32bit_c0_register($9, 0, val) -#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ -#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) - -#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ -#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) - #define read_c0_entryhi() __read_ulong_c0_register($10, 0) #define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) @@ -1730,12 +1731,6 @@ do { \ #define read_c0_guestctl0ext() __read_32bit_c0_register($11, 4) #define write_c0_guestctl0ext(val) __write_32bit_c0_register($11, 4, val) -#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ -#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) - -#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ -#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) - #define read_c0_status() __read_32bit_c0_register($12, 0) #define write_c0_status(val) __write_32bit_c0_register($12, 0, val) @@ -2728,7 +2723,7 @@ static inline void tlb_probe(void) static inline void tlb_read(void) { -#if MIPS34K_MISSED_ITLB_WAR +#ifdef CONFIG_WAR_MIPS34K_MISSED_ITLB int res = 0; __asm__ __volatile__( @@ -2750,7 +2745,7 @@ static inline void tlb_read(void) "tlbr\n\t" ".set reorder"); -#if MIPS34K_MISSED_ITLB_WAR +#ifdef CONFIG_WAR_MIPS34K_MISSED_ITLB if ((res & _ULCAST_(1))) __asm__ __volatile__( " .set push \n" diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h index 6878307f0ee6..c716e9397113 100644 --- a/arch/mips/include/asm/netlogic/psb-bootinfo.h +++ b/arch/mips/include/asm/netlogic/psb-bootinfo.h @@ -77,21 +77,6 @@ struct psb_info { uint64_t avail_mem_map; }; -enum { - NETLOGIC_IO_SPACE = 0x10, - PCIX_IO_SPACE, - PCIX_CFG_SPACE, - PCIX_MEMORY_SPACE, - HT_IO_SPACE, - HT_CFG_SPACE, - HT_MEMORY_SPACE, - SRAM_SPACE, - FLASH_CONTROLLER_SPACE -}; - -#define NLM_MAX_ARGS 64 -#define NLM_MAX_ENVS 32 - /* This is what netlboot passes and linux boot_mem_map is subtly different */ #define NLM_BOOT_MEM_MAP_MAX 32 struct nlm_boot_mem_map { @@ -102,6 +87,7 @@ struct nlm_boot_mem_map { uint32_t type; /* type of memory segment */ } map[NLM_BOOT_MEM_MAP_MAX]; }; +#define NLM_BOOT_MEM_RAM 1 /* Pointer to saved boot loader info */ extern struct psb_info nlm_prom_info; diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h index 62787765575e..c114a7ba0bad 100644 --- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h +++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h @@ -295,6 +295,8 @@ enum cvmx_board_types_enum { */ CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001, CVMX_BOARD_TYPE_UBNT_E100 = 20002, + CVMX_BOARD_TYPE_UBNT_E200 = 20003, + CVMX_BOARD_TYPE_UBNT_E220 = 20005, CVMX_BOARD_TYPE_CUST_DSR1000N = 20006, CVMX_BOARD_TYPE_KONTRON_S1901 = 21901, CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000, @@ -396,6 +398,8 @@ static inline const char *cvmx_board_type_to_string(enum /* Customer private range */ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200) + ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901) ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX) diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h index e26dc41a8a68..2362842ee2b5 100644 --- a/arch/mips/include/asm/pgtable-bits.h +++ b/arch/mips/include/asm/pgtable-bits.h @@ -249,11 +249,6 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val) #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) -#elif defined(CONFIG_MACH_INGENIC) - -/* Ingenic uses the WA bit to achieve write-combine memory writes */ -#define _CACHE_UNCACHED_ACCELERATED (1<<_CACHE_SHIFT) - #endif #ifndef _CACHE_CACHABLE_NO_WA diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index dd7a0f552cac..e5ef0fdd4838 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -37,8 +37,6 @@ struct vm_area_struct; _PAGE_GLOBAL | _page_cachable_default) #define PAGE_KERNEL_NC __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \ _PAGE_GLOBAL | _CACHE_CACHABLE_NONCOHERENT) -#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_WRITE | \ - _page_cachable_default) #define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \ __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED) diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index 856e12f6063d..7834e7c0c78a 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -29,6 +29,7 @@ */ extern unsigned int vced_count, vcei_count; +extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src); #ifdef CONFIG_32BIT #ifdef CONFIG_KVM_GUEST diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index afe9e0e03fe9..6e7361629348 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -5,8 +5,8 @@ * * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org) */ -#ifndef __ASM_R4K_TYPES_H -#define __ASM_R4K_TYPES_H +#ifndef __ASM_R4K_TIMER_H +#define __ASM_R4K_TIMER_H #include <linux/compiler.h> @@ -27,4 +27,4 @@ static inline void synchronise_count_slave(int cpu) #endif -#endif /* __ASM_R4K_TYPES_H */ +#endif /* __ASM_R4K_TIMER_H */ diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h index c423221b4792..0d03751955c4 100644 --- a/arch/mips/include/asm/sgi/heart.h +++ b/arch/mips/include/asm/sgi/heart.h @@ -264,6 +264,57 @@ struct ip30_heart_regs { /* 0x0ff00000 */ #define HC_NCOR_MEM_ERR BIT(1) #define HC_COR_MEM_ERR BIT(0) +/* + * HEART has 64 interrupt vectors available to it, subdivided into five + * priority levels. They are numbered 0 to 63. + */ +#define HEART_NUM_IRQS 64 + +/* + * These are the five interrupt priority levels and their corresponding + * CPU IPx interrupt pins. + * + * Level 4 - Error Interrupts. + * Level 3 - HEART timer interrupt. + * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts. + * Level 1 - General device interrupts. + * Level 0 - General device GFX flow control interrupts. + */ +#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */ +#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */ +#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */ +#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */ +#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */ + +/* HEART L0 Interrupts (Low Priority) */ +#define HEART_L0_INT_GENERIC 0 +#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1 +#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2 + +/* HEART L2 Interrupts (High Priority) */ +#define HEART_L2_INT_RESCHED_CPU_0 46 +#define HEART_L2_INT_RESCHED_CPU_1 47 +#define HEART_L2_INT_CALL_CPU_0 48 +#define HEART_L2_INT_CALL_CPU_1 49 + +/* HEART L3 Interrupts (Compare/Counter Timer) */ +#define HEART_L3_INT_TIMER 50 + +/* HEART L4 Interrupts (Errors) */ +#define HEART_L4_INT_XWID_ERR_9 51 +#define HEART_L4_INT_XWID_ERR_A 52 +#define HEART_L4_INT_XWID_ERR_B 53 +#define HEART_L4_INT_XWID_ERR_C 54 +#define HEART_L4_INT_XWID_ERR_D 55 +#define HEART_L4_INT_XWID_ERR_E 56 +#define HEART_L4_INT_XWID_ERR_F 57 +#define HEART_L4_INT_XWID_ERR_XBOW 58 +#define HEART_L4_INT_CPU_BUS_ERR_0 59 +#define HEART_L4_INT_CPU_BUS_ERR_1 60 +#define HEART_L4_INT_CPU_BUS_ERR_2 61 +#define HEART_L4_INT_CPU_BUS_ERR_3 62 +#define HEART_L4_INT_HEART_EXCP 63 + extern struct ip30_heart_regs __iomem *heart_regs; #define heart_read ____raw_readq diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index 3e8d2aaf96af..aa430a6c68b2 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -450,7 +450,7 @@ */ .macro CLI mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | STATMASK + li t1, ST0_KERNEL_CUMASK | STATMASK or t0, t1 xori t0, STATMASK mtc0 t0, CP0_STATUS @@ -463,7 +463,7 @@ */ .macro STI mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | STATMASK + li t1, ST0_KERNEL_CUMASK | STATMASK or t0, t1 xori t0, STATMASK & ~1 mtc0 t0, CP0_STATUS @@ -477,7 +477,7 @@ */ .macro KMODE mfc0 t0, CP0_STATUS - li t1, ST0_CU0 | (STATMASK & ~1) + li t1, ST0_KERNEL_CUMASK | (STATMASK & ~1) #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) andi t2, t0, ST0_IEP srl t2, 2 diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index 0b0a93bf83cd..a4374b4cb88f 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -117,6 +117,8 @@ do { \ __restore_dsp(next); \ } \ if (cop2_present) { \ + u32 status = read_c0_status(); \ + \ set_c0_status(ST0_CU2); \ if ((KSTK_STATUS(prev) & ST0_CU2)) { \ if (cop2_lazy_restore) \ @@ -127,7 +129,7 @@ do { \ !cop2_lazy_restore) { \ cop2_restore(next); \ } \ - clear_c0_status(ST0_CU2); \ + write_c0_status(status); \ } \ __clear_r5_hw_ll_bit(); \ __clear_software_ll_bit(); \ diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h index 00805ac6e9fc..abf980af9ef4 100644 --- a/arch/mips/include/asm/txx9/tx4939.h +++ b/arch/mips/include/asm/txx9/tx4939.h @@ -498,7 +498,6 @@ struct tx4939_vpc_desc { ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2) void tx4939_wdt_init(void); -void tx4939_add_memory_regions(void); void tx4939_setup(void); void tx4939_time_init(unsigned int tmrnr); void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask); diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h index e43f800e662d..21443f096238 100644 --- a/arch/mips/include/asm/war.h +++ b/arch/mips/include/asm/war.h @@ -9,8 +9,6 @@ #ifndef _ASM_WAR_H #define _ASM_WAR_H -#include <war.h> - /* * Work around certain R4000 CPU errata (as implemented by GCC): * @@ -72,152 +70,4 @@ #define DADDI_WAR 0 #endif -/* - * Another R4600 erratum. Due to the lack of errata information the exact - * technical details aren't known. I've experimentally found that disabling - * interrupts during indexed I-cache flushes seems to be sufficient to deal - * with the issue. - */ -#ifndef R4600_V1_INDEX_ICACHEOP_WAR -#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform -#endif - -/* - * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata: - * - * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D, - * Hit_Invalidate_D and Create_Dirty_Excl_D should only be - * executed if there is no other dcache activity. If the dcache is - * accessed for another instruction immeidately preceding when these - * cache instructions are executing, it is possible that the dcache - * tag match outputs used by these cache instructions will be - * incorrect. These cache instructions should be preceded by at least - * four instructions that are not any kind of load or store - * instruction. - * - * This is not allowed: lw - * nop - * nop - * nop - * cache Hit_Writeback_Invalidate_D - * - * This is allowed: lw - * nop - * nop - * nop - * nop - * cache Hit_Writeback_Invalidate_D - */ -#ifndef R4600_V1_HIT_CACHEOP_WAR -#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform -#endif - - -/* - * Writeback and invalidate the primary cache dcache before DMA. - * - * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D, - * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only - * operate correctly if the internal data cache refill buffer is empty. These - * CACHE instructions should be separated from any potential data cache miss - * by a load instruction to an uncached address to empty the response buffer." - * (Revision 2.0 device errata from IDT available on https://www.idt.com/ - * in .pdf format.) - */ -#ifndef R4600_V2_HIT_CACHEOP_WAR -#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform -#endif - -/* - * Workaround for the Sibyte M3 errata the text of which can be found at - * - * http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt - * - * This will enable the use of a special TLB refill handler which does a - * consistency check on the information in c0_badvaddr and c0_entryhi and - * will just return and take the exception again if the information was - * found to be inconsistent. - */ -#ifndef BCM1250_M3_WAR -#error Check setting of BCM1250_M3_WAR for your platform -#endif - -/* - * This is a DUART workaround related to glitches around register accesses - */ -#ifndef SIBYTE_1956_WAR -#error Check setting of SIBYTE_1956_WAR for your platform -#endif - -/* - * Fill buffers not flushed on CACHE instructions - * - * Hit_Invalidate_I cacheops invalidate an icache line but the refill - * for that line can get stale data from the fill buffer instead of - * accessing memory if the previous icache miss was also to that line. - * - * Workaround: generate an icache refill from a different line - * - * Affects: - * MIPS 4K RTL revision <3.0, PRID revision <4 - */ -#ifndef MIPS4K_ICACHE_REFILL_WAR -#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform -#endif - -/* - * Missing implicit forced flush of evictions caused by CACHE - * instruction - * - * Evictions caused by a CACHE instructions are not forced on to the - * bus. The BIU gives higher priority to fetches than to the data from - * the eviction buffer and no collision detection is performed between - * fetches and pending data from the eviction buffer. - * - * Workaround: Execute a SYNC instruction after the cache instruction - * - * Affects: - * MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8 - * MIPS 20Kc RTL revision <4.0, PRID revision <? - */ -#ifndef MIPS_CACHE_SYNC_WAR -#error Check setting of MIPS_CACHE_SYNC_WAR for your platform -#endif - -/* - * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for - * the line which this instruction itself exists, the following - * operation is not guaranteed." - * - * Workaround: do two phase flushing for Index_Invalidate_I - */ -#ifndef TX49XX_ICACHE_INDEX_INV_WAR -#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform -#endif - -/* - * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra - * opposes it being called that) where invalid instructions in the same - * I-cache line worth of instructions being fetched may case spurious - * exceptions. - */ -#ifndef ICACHE_REFILLS_WORKAROUND_WAR -#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform -#endif - -/* - * On the R10000 up to version 2.6 (not sure about 2.7) there is a bug that - * may cause ll / sc and lld / scd sequences to execute non-atomically. - */ -#ifndef R10000_LLSC_WAR -#error Check setting of R10000_LLSC_WAR for your platform -#endif - -/* - * 34K core erratum: "Problems Executing the TLBR Instruction" - */ -#ifndef MIPS34K_MISSED_ITLB_WAR -#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform -#endif - #endif /* _ASM_WAR_H */ |