Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "First cycle with Boris as NAND maintainer! Many (most) bullets stolen
  from him.

  Generic:
   - Migrated NAND LED trigger to be a generic MTD trigger

  NAND:
   - Introduction of the "ECC algorithm" concept, to avoid overloading
     the ECC mode field too much more
   - Replaced the nand_ecclayout infrastructure with something a little
     more flexible (finally!) and future proof
   - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some
     of this into their own tree as well
   - Prepare the sunxi NAND driver to receive DMA support
   - Handle bitflips in erased pages on GPMI revisions that do not
     support this in hardware.

  SPI NOR:
   - Start using the spi_flash_read() API for SPI drivers that support
     it (i.e., SPI drivers with special memory-mapped flash modes)

  And other small scattered improvments"

* tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits)
  mtd: spi-nor: support GigaDevice gd25lq64c
  mtd: nand_bch: fix spelling of "probably"
  mtd: brcmnand: respect ECC algorithm set by NAND subsystem
  gpmi-nand: Handle ECC Errors in erased pages
  Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value
  mtd: nand: add support for "nand-ecc-algo" DT property
  mtd: mtd: drop NAND_ECC_SOFT_BCH enum value
  mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping
  mtd: nand: read ECC algorithm from the new field
  mtd: nand: fsmc: validate ECC setup by checking algorithm directly
  mtd: nand: set ECC algorithm to Hamming on fallback
  staging: mt29f_spinand: set ECC algorithm explicitly
  CRIS v32: nand: set ECC algorithm explicitly
  mtd: nand: atmel: set ECC algorithm explicitly
  mtd: nand: davinci: set ECC algorithm explicitly
  mtd: nand: bf5xx: set ECC algorithm explicitly
  mtd: nand: omap2: Fix high memory dma prefetch transfer
  mtd: nand: omap2: Start dma request before enabling prefetch
  mtd: nandsim: add __init attribute
  mtd: nand: move of_get_nand_xxx() helpers into nand_base.c
  ...

1 files changed, 51 insertions, 36 deletions

diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 4e3f9b7a02e4..258fd03c9ef5 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -48,20 +48,6 @@
 #define QI_LB60_GPIO_KEYIN8		JZ_GPIO_PORTD(26)
 
 /* NAND */
-static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-	.eccbytes = 36,
-	.eccpos = {
-		6,  7,	8,  9,	10, 11, 12, 13,
-		14, 15, 16, 17, 18, 19, 20, 21,
-		22, 23, 24, 25, 26, 27, 28, 29,
-		30, 31, 32, 33, 34, 35, 36, 37,
-		38, 39, 40, 41
-	},
-	.oobfree = {
-		{ .offset = 2, .length = 4 },
-		{ .offset = 42, .length = 22 }
-	},
-};
 
 /* Early prototypes of the QI LB60 had only 1GB of NAND.
  * In order to support these devices as well the partition and ecc layout is
@@ -84,25 +70,6 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
 	},
 };
 
-static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-	.eccbytes = 72,
-	.eccpos = {
-		12, 13, 14, 15, 16, 17, 18, 19,
-		20, 21, 22, 23, 24, 25, 26, 27,
-		28, 29, 30, 31, 32, 33, 34, 35,
-		36, 37, 38, 39, 40, 41, 42, 43,
-		44, 45, 46, 47, 48, 49, 50, 51,
-		52, 53, 54, 55, 56, 57, 58, 59,
-		60, 61, 62, 63, 64, 65, 66, 67,
-		68, 69, 70, 71, 72, 73, 74, 75,
-		76, 77, 78, 79, 80, 81, 82, 83
-	},
-	.oobfree = {
-		{ .offset = 2, .length = 10 },
-		{ .offset = 84, .length = 44 },
-	},
-};
-
 static struct mtd_partition qi_lb60_partitions_2gb[] = {
 	{
 		.name = "NAND BOOT partition",
@@ -121,19 +88,67 @@ static struct mtd_partition qi_lb60_partitions_2gb[] = {
 	},
 };
 
+static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = 36;
+	oobregion->offset = 6;
+
+	if (mtd->oobsize == 128) {
+		oobregion->length *= 2;
+		oobregion->offset *= 2;
+	}
+
+	return 0;
+}
+
+static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	int eccbytes = 36, eccoff = 6;
+
+	if (section > 1)
+		return -ERANGE;
+
+	if (mtd->oobsize == 128) {
+		eccbytes *= 2;
+		eccoff *= 2;
+	}
+
+	if (!section) {
+		oobregion->offset = 2;
+		oobregion->length = eccoff - 2;
+	} else {
+		oobregion->offset = eccoff + eccbytes;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
+	.ecc = qi_lb60_ooblayout_ecc,
+	.free = qi_lb60_ooblayout_free,
+};
+
 static void qi_lb60_nand_ident(struct platform_device *pdev,
-		struct nand_chip *chip, struct mtd_partition **partitions,
+		struct mtd_info *mtd, struct mtd_partition **partitions,
 		int *num_partitions)
 {
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
 	if (chip->page_shift == 12) {
-		chip->ecc.layout = &qi_lb60_ecclayout_2gb;
 		*partitions = qi_lb60_partitions_2gb;
 		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
 	} else {
-		chip->ecc.layout = &qi_lb60_ecclayout_1gb;
 		*partitions = qi_lb60_partitions_1gb;
 		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
 	}
+
+	mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
 }
 
 static struct jz_nand_platform_data qi_lb60_nand_pdata = {