Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	include/asm-x86/statfs.h

1 files changed, 48 insertions, 125 deletions

diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 24a2d907aa0d..4a4c59f2737a 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -12,6 +12,14 @@
 
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
 
 static int mips_next_event(unsigned long delta,
                            struct clock_event_device *evt)
@@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
 	unsigned int cnt;
 	int res;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	{
-	unsigned long flags, vpflags;
-	local_irq_save(flags);
-	vpflags = dvpe();
-#endif
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
-	evpe(vpflags);
-	local_irq_restore(flags);
-	}
-#endif
 	return res;
 }
 
-static void mips_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }
 
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
 
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
-	write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
 
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
 	struct clock_event_device *cd;
@@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
 	if (!r2 || (read_c0_cause() & (1 << 30))) {
-		c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
-		if (cpu_data[cpu].vpe_id)
-			goto out;
-		cpu = 0;
-#endif
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 	}
@@ -107,65 +78,16 @@ out:
 	return IRQ_HANDLED;
 }
 
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
-	.flags = IRQF_DISABLED,
-#else
 	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
 	.name = "timer",
 };
 
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
 
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
 {
 }
 
@@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
 }
 
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+int c0_compare_int_usable(void)
 {
 	unsigned int delta;
 	unsigned int cnt;
@@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
 	 */
 	if (c0_compare_int_pending()) {
 		write_c0_compare(read_c0_count());
-		irq_disable_hazard();
+		compare_change_hazard();
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		irq_disable_hazard();
+		compare_change_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
+	compare_change_hazard();
 	if (!c0_compare_int_pending())
 		return 0;
 
 	write_c0_compare(read_c0_count());
-	irq_disable_hazard();
+	compare_change_hazard();
 	if (c0_compare_int_pending())
 		return 0;
 
@@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
 	return 1;
 }
 
+#ifndef CONFIG_MIPS_MT_SMTC
+
 int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
@@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	setup_smtc_dummy_clockevent_device();
-
-	/*
-	 * On SMTC we only register VPE0's compare interrupt as clockevent
-	 * device.
-	 */
-	if (cpu)
-		return 0;
-#endif
-
 	if (!c0_compare_int_usable())
 		return -ENXIO;
 
@@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cd->rating		= 300;
 	cd->irq			= irq;
-#ifdef CONFIG_MIPS_MT_SMTC
-	cd->cpumask		= CPU_MASK_ALL;
-#else
 	cd->cpumask		= cpumask_of_cpu(cpu);
-#endif
 	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_mode;
+	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;
 
 	clockevents_register_device(cd);
@@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cp0_timer_irq_installed = 1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-	setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
 	setup_irq(irq, &c0_compare_irqaction);
-#endif
 
 	return 0;
 }
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */