Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

1 files changed, 67 insertions, 4 deletions

diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index dc49cf30c2db..5342674842f5 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -69,6 +69,63 @@ static int __init htw_disable(char *s)
 
 __setup("nohtw", htw_disable);
 
+static int mips_ftlb_disabled;
+static int mips_has_ftlb_configured;
+
+static void set_ftlb_enable(struct cpuinfo_mips *c, int enable);
+
+static int __init ftlb_disable(char *s)
+{
+	unsigned int config4, mmuextdef;
+
+	/*
+	 * If the core hasn't done any FTLB configuration, there is nothing
+	 * for us to do here.
+	 */
+	if (!mips_has_ftlb_configured)
+		return 1;
+
+	/* Disable it in the boot cpu */
+	set_ftlb_enable(&cpu_data[0], 0);
+
+	back_to_back_c0_hazard();
+
+	config4 = read_c0_config4();
+
+	/* Check that FTLB has been disabled */
+	mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+	/* MMUSIZEEXT == VTLB ON, FTLB OFF */
+	if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) {
+		/* This should never happen */
+		pr_warn("FTLB could not be disabled!\n");
+		return 1;
+	}
+
+	mips_ftlb_disabled = 1;
+	mips_has_ftlb_configured = 0;
+
+	/*
+	 * noftlb is mainly used for debug purposes so print
+	 * an informative message instead of using pr_debug()
+	 */
+	pr_info("FTLB has been disabled\n");
+
+	/*
+	 * Some of these bits are duplicated in the decode_config4.
+	 * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case
+	 * once FTLB has been disabled so undo what decode_config4 did.
+	 */
+	cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways *
+			       cpu_data[0].tlbsizeftlbsets;
+	cpu_data[0].tlbsizeftlbsets = 0;
+	cpu_data[0].tlbsizeftlbways = 0;
+
+	return 1;
+}
+
+__setup("noftlb", ftlb_disable);
+
+
 static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -140,7 +197,7 @@ static inline unsigned long cpu_get_fpu_id(void)
  */
 static inline int __cpu_has_fpu(void)
 {
-	return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
+	return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
 }
 
 static inline unsigned long cpu_get_msa_id(void)
@@ -399,6 +456,8 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 			ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
 			/* fall through */
 		case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
+			if (mips_ftlb_disabled)
+				break;
 			newcf4 = (config4 & ~ftlb_page) |
 				(page_size_ftlb(mmuextdef) <<
 				 MIPS_CONF4_FTLBPAGESIZE_SHIFT);
@@ -418,6 +477,7 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 			c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >>
 					      MIPS_CONF4_FTLBWAYS_SHIFT) + 2;
 			c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets;
+			mips_has_ftlb_configured = 1;
 			break;
 		}
 	}
@@ -432,7 +492,7 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
 	unsigned int config5;
 
 	config5 = read_c0_config5();
-	config5 &= ~MIPS_CONF5_UFR;
+	config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
 	write_c0_config5(config5);
 
 	if (config5 & MIPS_CONF5_EVA)
@@ -453,8 +513,8 @@ static void decode_configs(struct cpuinfo_mips *c)
 
 	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 
-	/* Enable FTLB if present */
-	set_ftlb_enable(c, 1);
+	/* Enable FTLB if present and not disabled */
+	set_ftlb_enable(c, !mips_ftlb_disabled);
 
 	ok = decode_config0(c);			/* Read Config registers.  */
 	BUG_ON(!ok);				/* Arch spec violation!	 */
@@ -1058,6 +1118,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		break;
 	}
 	case PRID_IMP_BMIPS5000:
+	case PRID_IMP_BMIPS5200:
 		c->cputype = CPU_BMIPS5000;
 		__cpu_name[cpu] = "Broadcom BMIPS5000";
 		set_elf_platform(cpu, "bmips5000");
@@ -1288,6 +1349,8 @@ void cpu_probe(void)
 				    MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
 			if (c->fpu_id & MIPS_FPIR_3D)
 				c->ases |= MIPS_ASE_MIPS3D;
+			if (c->fpu_id & MIPS_FPIR_FREP)
+				c->options |= MIPS_CPU_FRE;
 		}
 	}