Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...

3 files changed, 98 insertions, 102 deletions

diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 6c65ac701912..529e74742d9f 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -40,23 +40,23 @@
 #include <asm/mipsregs.h>
 #include <asm/time.h>
 
+#include <asm/netlogic/common.h>
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
 #include <asm/netlogic/xlp-hal/pic.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 
-/* These addresses are computed by the nlm_hal_init() */
-uint64_t nlm_io_base;
-uint64_t nlm_sys_base;
-uint64_t nlm_pic_base;
-
 /* Main initialization */
-void nlm_hal_init(void)
+void nlm_node_init(int node)
 {
-	nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
-	nlm_sys_base = nlm_get_sys_regbase(0);	/* node 0 */
-	nlm_pic_base = nlm_get_pic_regbase(0);	/* node 0 */
+	struct nlm_soc_info *nodep;
+
+	nodep = nlm_get_node(node);
+	nodep->sysbase = nlm_get_sys_regbase(node);
+	nodep->picbase = nlm_get_pic_regbase(node);
+	nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+	spin_lock_init(&nodep->piclock);
 }
 
 int nlm_irq_to_irt(int irq)
@@ -100,52 +100,15 @@ int nlm_irq_to_irt(int irq)
 	}
 }
 
-int nlm_irt_to_irq(int irt)
-{
-	switch (irt) {
-	case PIC_IRT_UART_0_INDEX:
-		return PIC_UART_0_IRQ;
-	case PIC_IRT_UART_1_INDEX:
-		return PIC_UART_1_IRQ;
-	case PIC_IRT_PCIE_LINK_0_INDEX:
-	       return PIC_PCIE_LINK_0_IRQ;
-	case PIC_IRT_PCIE_LINK_1_INDEX:
-	       return PIC_PCIE_LINK_1_IRQ;
-	case PIC_IRT_PCIE_LINK_2_INDEX:
-	       return PIC_PCIE_LINK_2_IRQ;
-	case PIC_IRT_PCIE_LINK_3_INDEX:
-	       return PIC_PCIE_LINK_3_IRQ;
-	case PIC_IRT_EHCI_0_INDEX:
-		return PIC_EHCI_0_IRQ;
-	case PIC_IRT_EHCI_1_INDEX:
-		return PIC_EHCI_1_IRQ;
-	case PIC_IRT_OHCI_0_INDEX:
-		return PIC_OHCI_0_IRQ;
-	case PIC_IRT_OHCI_1_INDEX:
-		return PIC_OHCI_1_IRQ;
-	case PIC_IRT_OHCI_2_INDEX:
-		return PIC_OHCI_2_IRQ;
-	case PIC_IRT_OHCI_3_INDEX:
-		return PIC_OHCI_3_IRQ;
-	case PIC_IRT_MMC_INDEX:
-	       return PIC_MMC_IRQ;
-	case PIC_IRT_I2C_0_INDEX:
-		return PIC_I2C_0_IRQ;
-	case PIC_IRT_I2C_1_INDEX:
-		return PIC_I2C_1_IRQ;
-	default:
-		return -1;
-	}
-}
-
-unsigned int nlm_get_core_frequency(int core)
+unsigned int nlm_get_core_frequency(int node, int core)
 {
 	unsigned int pll_divf, pll_divr, dfs_div, ext_div;
 	unsigned int rstval, dfsval, denom;
-	uint64_t num;
+	uint64_t num, sysbase;
 
-	rstval = nlm_read_sys_reg(nlm_sys_base, SYS_POWER_ON_RESET_CFG);
-	dfsval = nlm_read_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIV_VALUE);
+	sysbase = nlm_get_node(node)->sysbase;
+	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+	dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
 	pll_divf = ((rstval >> 10) & 0x7f) + 1;
 	pll_divr = ((rstval >> 8)  & 0x3) + 1;
 	ext_div  = ((rstval >> 30) & 0x3) + 1;
@@ -159,5 +122,5 @@ unsigned int nlm_get_core_frequency(int core)
 
 unsigned int nlm_get_cpu_frequency(void)
 {
-	return nlm_get_core_frequency(0);
+	return nlm_get_core_frequency(0, 0);
 }
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index d8997098defd..4894d62043ac 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -52,26 +52,40 @@
 #include <asm/netlogic/xlp-hal/xlp.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 
-unsigned long nlm_common_ebase = 0x0;
-
-/* default to uniprocessor */
-uint32_t nlm_coremask = 1, nlm_cpumask  = 1;
-int  nlm_threads_per_core = 1;
+uint64_t nlm_io_base;
+struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+cpumask_t nlm_cpumask = CPU_MASK_CPU0;
+unsigned int nlm_threads_per_core;
 extern u32 __dtb_start[];
 
 static void nlm_linux_exit(void)
 {
-	nlm_write_sys_reg(nlm_sys_base, SYS_CHIP_RESET, 1);
+	uint64_t sysbase = nlm_get_node(0)->sysbase;
+
+	nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
 	for ( ; ; )
 		cpu_wait();
 }
 
 void __init plat_mem_setup(void)
 {
+	void *fdtp;
+
 	panic_timeout	= 5;
 	_machine_restart = (void (*)(char *))nlm_linux_exit;
 	_machine_halt	= nlm_linux_exit;
 	pm_power_off	= nlm_linux_exit;
+
+	/*
+	 * If no FDT pointer is passed in, use the built-in FDT.
+	 * device_tree_init() does not handle CKSEG0 pointers in
+	 * 64-bit, so convert pointer.
+	 */
+	fdtp = (void *)(long)fw_arg0;
+	if (!fdtp)
+		fdtp = __dtb_start;
+	fdtp = phys_to_virt(__pa(fdtp));
+	early_init_devtree(fdtp);
 }
 
 const char *get_system_type(void)
@@ -94,27 +108,19 @@ void xlp_mmu_init(void)
 		(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
 }
 
-void __init prom_init(void)
+void nlm_percpu_init(int hwcpuid)
 {
-	void *fdtp;
+}
 
+void __init prom_init(void)
+{
+	nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
 	xlp_mmu_init();
-	nlm_hal_init();
-
-	/*
-	 * If no FDT pointer is passed in, use the built-in FDT.
-	 * device_tree_init() does not handle CKSEG0 pointers in
-	 * 64-bit, so convert pointer.
-	 */
-	fdtp = (void *)(long)fw_arg0;
-	if (!fdtp)
-		fdtp = __dtb_start;
-	fdtp = phys_to_virt(__pa(fdtp));
-	early_init_devtree(fdtp);
+	nlm_node_init(0);
 
-	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
 #ifdef CONFIG_SMP
-	nlm_wakeup_secondary_cpus(0xffffffff);
+	cpumask_setall(&nlm_cpumask);
+	nlm_wakeup_secondary_cpus();
 
 	/* update TLB size after waking up threads */
 	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index 44d923ff3846..cb9010642ac3 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -51,45 +51,72 @@
 #include <asm/netlogic/xlp-hal/xlp.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 
-static void xlp_enable_secondary_cores(void)
+static int xlp_wakeup_core(uint64_t sysbase, int core)
 {
-	uint32_t core, value, coremask, syscoremask;
+	uint32_t coremask, value;
 	int count;
 
-	/* read cores in reset from SYS block */
-	syscoremask = nlm_read_sys_reg(nlm_sys_base, SYS_CPU_RESET);
+	coremask = (1 << core);
 
-	/* update user specified */
-	nlm_coremask = nlm_coremask & (syscoremask | 1);
+	/* Enable CPU clock */
+	value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
+	value &= ~coremask;
+	nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
 
-	for (core = 1; core < 8; core++) {
-		coremask = 1 << core;
-		if ((nlm_coremask & coremask) == 0)
-			continue;
+	/* Remove CPU Reset */
+	value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET);
+	value &= ~coremask;
+	nlm_write_sys_reg(sysbase, SYS_CPU_RESET, value);
 
-		/* Enable CPU clock */
-		value = nlm_read_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIS_CTRL);
-		value &= ~coremask;
-		nlm_write_sys_reg(nlm_sys_base, SYS_CORE_DFS_DIS_CTRL, value);
+	/* Poll for CPU to mark itself coherent */
+	count = 100000;
+	do {
+		value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
+	} while ((value & coremask) != 0 && --count > 0);
 
-		/* Remove CPU Reset */
-		value = nlm_read_sys_reg(nlm_sys_base, SYS_CPU_RESET);
-		value &= ~coremask;
-		nlm_write_sys_reg(nlm_sys_base, SYS_CPU_RESET, value);
+	return count != 0;
+}
+
+static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
+{
+	struct nlm_soc_info *nodep;
+	uint64_t syspcibase;
+	uint32_t syscoremask;
+	int core, n, cpu;
+
+	for (n = 0; n < NLM_NR_NODES; n++) {
+		syspcibase = nlm_get_sys_pcibase(n);
+		if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
+			break;
+
+		/* read cores in reset from SYS and account for boot cpu */
+		nlm_node_init(n);
+		nodep = nlm_get_node(n);
+		syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET);
+		if (n == 0)
+			syscoremask |= 1;
+
+		for (core = 0; core < NLM_CORES_PER_NODE; core++) {
+			/* see if the core exists */
+			if ((syscoremask & (1 << core)) == 0)
+				continue;
 
-		/* Poll for CPU to mark itself coherent */
-		count = 100000;
-		do {
-			value = nlm_read_sys_reg(nlm_sys_base,
-			    SYS_CPU_NONCOHERENT_MODE);
-		} while ((value & coremask) != 0 && count-- > 0);
+			/* see if at least the first thread is enabled */
+			cpu = (n * NLM_CORES_PER_NODE + core)
+						* NLM_THREADS_PER_CORE;
+			if (!cpumask_test_cpu(cpu, wakeup_mask))
+				continue;
 
-		if (count == 0)
-			pr_err("Failed to enable core %d\n", core);
+			/* wake up the core */
+			if (xlp_wakeup_core(nodep->sysbase, core))
+				nodep->coremask |= 1u << core;
+			else
+				pr_err("Failed to enable core %d\n", core);
+		}
 	}
 }
 
-void xlp_wakeup_secondary_cpus(void)
+void xlp_wakeup_secondary_cpus()
 {
 	/*
 	 * In case of u-boot, the secondaries are in reset
@@ -98,5 +125,5 @@ void xlp_wakeup_secondary_cpus(void)
 	xlp_boot_core0_siblings();
 
 	/* now get other cores out of reset */
-	xlp_enable_secondary_cores();
+	xlp_enable_secondary_cores(&nlm_cpumask);
 }