Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.

  The executive summary:

   - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
   - Avoid useless rebuilds for zboot.
   - jz4780: Add NEMC, BCH and NAND device tree nodes
   - Initial support for the MicroChip's DT platform.  As all the device
     drivers are missing this is still of limited use.
   - Some Loongson3 cleanups.
   - The unavoidable whitespace polishing.
   - Reduce clock skew when synchronizing the CPU cycle counters on CPU
     startup.
   - Add MIPS R6 fixes.
   - Lots of cleanups across arch/mips as fallout from KVM.
   - Lots of minor fixes and changes for IEEE 754-2008 support to the
     FPU emulator / fp-assist software.
   - Minor Ralink, BCM47xx and bcm963xx platform support improvments.
   - Support SMP on BCM63168"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
  MIPS: zboot: Add support for serial debug using the PROM
  MIPS: zboot: Avoid useless rebuilds
  MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
  MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
  MIPS: bcm963xx: Update bcm_tag field image_sequence
  MIPS: bcm963xx: Move extended flash address to bcm_tag header file
  MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
  MIPS: bcm63xx: nvram: Use nvram structure definition from header file
  MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
  MAINTAINERS: Add KVM for MIPS entry
  MIPS: KVM: Add missing newline to kvm_err()
  MIPS: Move KVM specific opcodes into asm/inst.h
  MIPS: KVM: Use cacheops.h definitions
  MIPS: Break down cacheops.h definitions
  MIPS: Use EXCCODE_ constants with set_except_vector()
  MIPS: Update trap codes
  MIPS: Move Cause.ExcCode trap codes to mipsregs.h
  MIPS: KVM: Make kvm_mips_{init,exit}() static
  MIPS: KVM: Refactor added offsetof()s
  MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
  ...

1 files changed, 55 insertions, 32 deletions

diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index dfb04fcedb04..0d3d1a97895f 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -107,31 +107,31 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
 };
 
 static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 19, 1),
+	FUNC("sdxc d6", 3, 19, 1),
 	FUNC("utif", 2, 19, 1),
 	FUNC("gpio", 1, 19, 1),
-	FUNC("pwm", 0, 19, 1),
+	FUNC("pwm1", 0, 19, 1),
 };
 
 static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-	FUNC("sdcx", 3, 18, 1),
+	FUNC("sdxc d7", 3, 18, 1),
 	FUNC("utif", 2, 18, 1),
 	FUNC("gpio", 1, 18, 1),
-	FUNC("pwm", 0, 18, 1),
+	FUNC("pwm0", 0, 18, 1),
 };
 
 static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-	FUNC("sdcx", 3, 20, 2),
+	FUNC("sdxc d5 d4", 3, 20, 2),
 	FUNC("pwm", 2, 20, 2),
 	FUNC("gpio", 1, 20, 2),
-	FUNC("uart", 0, 20, 2),
+	FUNC("uart2", 0, 20, 2),
 };
 
 static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 45, 2),
+	FUNC("sw_r", 3, 45, 2),
 	FUNC("pwm", 2, 45, 2),
 	FUNC("gpio", 1, 45, 2),
-	FUNC("uart", 0, 45, 2),
+	FUNC("uart1", 0, 45, 2),
 };
 
 static struct rt2880_pmx_func i2c_grp_mt7628[] = {
@@ -143,21 +143,21 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
 
 static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
 static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
 static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
 
 static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
 	FUNC("jtag", 3, 22, 8),
 	FUNC("utif", 2, 22, 8),
 	FUNC("gpio", 1, 22, 8),
-	FUNC("sdcx", 0, 22, 8),
+	FUNC("sdxc", 0, 22, 8),
 };
 
 static struct rt2880_pmx_func uart0_grp_mt7628[] = {
 	FUNC("-", 3, 12, 2),
 	FUNC("-", 2, 12, 2),
 	FUNC("gpio", 1, 12, 2),
-	FUNC("uart", 0, 12, 2),
+	FUNC("uart0", 0, 12, 2),
 };
 
 static struct rt2880_pmx_func i2s_grp_mt7628[] = {
@@ -171,7 +171,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
 	FUNC("-", 3, 6, 1),
 	FUNC("refclk", 2, 6, 1),
 	FUNC("gpio", 1, 6, 1),
-	FUNC("spi", 0, 6, 1),
+	FUNC("spi cs1", 0, 6, 1),
 };
 
 static struct rt2880_pmx_func spis_grp_mt7628[] = {
@@ -188,28 +188,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
 	FUNC("gpio", 0, 11, 1),
 };
 
-#define MT7628_GPIO_MODE_MASK	0x3
-
-#define MT7628_GPIO_MODE_PWM1	30
-#define MT7628_GPIO_MODE_PWM0	28
-#define MT7628_GPIO_MODE_UART2	26
-#define MT7628_GPIO_MODE_UART1	24
-#define MT7628_GPIO_MODE_I2C	20
-#define MT7628_GPIO_MODE_REFCLK	18
-#define MT7628_GPIO_MODE_PERST	16
-#define MT7628_GPIO_MODE_WDT	14
-#define MT7628_GPIO_MODE_SPI	12
-#define MT7628_GPIO_MODE_SDMODE	10
-#define MT7628_GPIO_MODE_UART0	8
-#define MT7628_GPIO_MODE_I2S	6
-#define MT7628_GPIO_MODE_CS1	4
-#define MT7628_GPIO_MODE_SPIS	2
-#define MT7628_GPIO_MODE_GPIO	0
+static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_kn", 0, 35, 1),
+};
+
+static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_an", 0, 35, 1),
+};
+
+#define MT7628_GPIO_MODE_MASK		0x3
+
+#define MT7628_GPIO_MODE_WLED_KN	48
+#define MT7628_GPIO_MODE_WLED_AN	32
+#define MT7628_GPIO_MODE_PWM1		30
+#define MT7628_GPIO_MODE_PWM0		28
+#define MT7628_GPIO_MODE_UART2		26
+#define MT7628_GPIO_MODE_UART1		24
+#define MT7628_GPIO_MODE_I2C		20
+#define MT7628_GPIO_MODE_REFCLK		18
+#define MT7628_GPIO_MODE_PERST		16
+#define MT7628_GPIO_MODE_WDT		14
+#define MT7628_GPIO_MODE_SPI		12
+#define MT7628_GPIO_MODE_SDMODE		10
+#define MT7628_GPIO_MODE_UART0		8
+#define MT7628_GPIO_MODE_I2S		6
+#define MT7628_GPIO_MODE_CS1		4
+#define MT7628_GPIO_MODE_SPIS		2
+#define MT7628_GPIO_MODE_GPIO		0
 
 static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 	GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM1),
-	GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+	GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM0),
 	GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_UART2),
@@ -233,6 +249,10 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 				1, MT7628_GPIO_MODE_SPIS),
 	GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_GPIO),
+	GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_AN),
+	GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_KN),
 	{ 0 }
 };
 
@@ -436,10 +456,13 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000100.timer", periph_rate);
 	ralink_clk_add("10000120.watchdog", periph_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
+	ralink_clk_add("10000d00.uart1", periph_rate);
+	ralink_clk_add("10000e00.uart2", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
 
-	if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+	if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
 		/*
 		 * When the CPU goes into sleep mode, the BUS clock will be
 		 * too low for USB to function properly. Adjust the busses
@@ -552,7 +575,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	}
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-		"Ralink %s ver:%u eco:%u",
+		"MediaTek %s ver:%u eco:%u",
 		name,
 		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
 		(rev & CHIP_REV_ECO_MASK));