MIPS: Whitespace cleanup.

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 22 insertions, 22 deletions

diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 75ada8a9713b..7cec0a4e527d 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -121,22 +121,22 @@ void __init sgimc_init(void)
 	 */
 
 	/* Step 0: Make sure we turn off the watchdog in case it's
-	 *         still running (which might be the case after a
-	 *         soft reboot).
+	 *	   still running (which might be the case after a
+	 *	   soft reboot).
 	 */
 	tmp = sgimc->cpuctrl0;
 	tmp &= ~SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = tmp;
 
 	/* Step 1: The CPU/GIO error status registers will not latch
-	 *         up a new error status until the register has been
-	 *         cleared by the cpu.  These status registers are
-	 *         cleared by writing any value to them.
+	 *	   up a new error status until the register has been
+	 *	   cleared by the cpu.	These status registers are
+	 *	   cleared by writing any value to them.
 	 */
 	sgimc->cstat = sgimc->gstat = 0;
 
 	/* Step 2: Enable all parity checking in cpu control register
-	 *         zero.
+	 *	   zero.
 	 */
 	/* don't touch parity settings for IP28 */
 	tmp = sgimc->cpuctrl0;
@@ -147,7 +147,7 @@ void __init sgimc_init(void)
 	sgimc->cpuctrl0 = tmp;
 
 	/* Step 3: Setup the MC write buffer depth, this is controlled
-	 *         in cpu control register 1 in the lower 4 bits.
+	 *	   in cpu control register 1 in the lower 4 bits.
 	 */
 	tmp = sgimc->cpuctrl1;
 	tmp &= ~0xf;
@@ -155,26 +155,26 @@ void __init sgimc_init(void)
 	sgimc->cpuctrl1 = tmp;
 
 	/* Step 4: Initialize the RPSS divider register to run as fast
-	 *         as it can correctly operate.  The register is laid
-	 *         out as follows:
+	 *	   as it can correctly operate.	 The register is laid
+	 *	   out as follows:
 	 *
-	 *         ----------------------------------------
-	 *         |  RESERVED  |   INCREMENT   | DIVIDER |
-	 *         ----------------------------------------
-	 *          31        16 15            8 7       0
+	 *	   ----------------------------------------
+	 *	   |  RESERVED	|   INCREMENT	| DIVIDER |
+	 *	   ----------------------------------------
+	 *	    31	      16 15	       8 7	 0
 	 *
-	 *         DIVIDER determines how often a 'tick' happens,
-	 *         INCREMENT determines by how the RPSS increment
-	 *         registers value increases at each 'tick'. Thus,
-	 *         for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+	 *	   DIVIDER determines how often a 'tick' happens,
+	 *	   INCREMENT determines by how the RPSS increment
+	 *	   registers value increases at each 'tick'. Thus,
+	 *	   for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
 	 */
 	sgimc->divider = 0x101;
 
 	/* Step 5: Initialize GIO64 arbitrator configuration register.
 	 *
 	 * NOTE: HPC init code in sgihpc_init() must run before us because
-	 *       we need to know Guiness vs. FullHouse and the board
-	 *       revision on this machine. You have been warned.
+	 *	 we need to know Guiness vs. FullHouse and the board
+	 *	 revision on this machine. You have been warned.
 	 */
 
 	/* First the basic invariants across all GIO64 implementations. */
@@ -187,18 +187,18 @@ void __init sgimc_init(void)
 		if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
 			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC at 64bits */
 			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp0 pipelines */
-			tmp |= SGIMC_GIOPAR_MASTEREXP1;	/* exp1 masters */
+			tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
 			tmp |= SGIMC_GIOPAR_RTIMEEXP0;	/* exp0 is realtime */
 		} else {
 			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC 64bits */
 			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp[01] pipelined */
 			tmp |= SGIMC_GIOPAR_PLINEEXP1;
-			tmp |= SGIMC_GIOPAR_MASTEREISA;	/* EISA masters */
+			tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
 		}
 	} else {
 		/* Guiness specific settings. */
 		tmp |= SGIMC_GIOPAR_EISA64;	/* MC talks to EISA at 64bits */
-		tmp |= SGIMC_GIOPAR_MASTEREISA;	/* EISA bus can act as master */
+		tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
 	}
 	sgimc->giopar = tmp;	/* poof */