summaryrefslogtreecommitdiffstats
path: root/arch/mips/sgi-ip27
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-13 23:52:21 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-13 23:52:21 +0200
commitd1447464789918db1e1a3d0aaf50d3d0f6487a4f (patch)
tree490bd5c493cdba742dc90d3731962226838e5f33 /arch/mips/sgi-ip27
parentMerge git://www.linux-watchdog.org/linux-watchdog (diff)
parentMerge branch '3.10-fixes' into mips-for-linux-next (diff)
downloadlinux-d1447464789918db1e1a3d0aaf50d3d0f6487a4f.tar.xz
linux-d1447464789918db1e1a3d0aaf50d3d0f6487a4f.zip
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
Diffstat (limited to 'arch/mips/sgi-ip27')
-rw-r--r--arch/mips/sgi-ip27/Makefile1
-rw-r--r--arch/mips/sgi-ip27/ip27-irq-pci.c266
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c214
3 files changed, 267 insertions, 214 deletions
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index 1f29e761d691..da8f6816d346 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,4 +7,5 @@ obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
+obj-$(CONFIG_PCI) += ip27-irq-pci.o
obj-$(CONFIG_SMP) += ip27-smp.o
diff --git a/arch/mips/sgi-ip27/ip27-irq-pci.c b/arch/mips/sgi-ip27/ip27-irq-pci.c
new file mode 100644
index 000000000000..ec22ec5600f3
--- /dev/null
+++ b/arch/mips/sgi-ip27/ip27-irq-pci.c
@@ -0,0 +1,266 @@
+/*
+ * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
+ *
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999 - 2001 Kanoj Sarcar
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/random.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+
+#include <asm/processor.h>
+#include <asm/pci/bridge.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+#include <asm/sn/intr.h>
+
+/*
+ * Linux has a controller-independent x86 interrupt architecture.
+ * every controller has a 'controller-template', that is used
+ * by the main code to do the right thing. Each driver-visible
+ * interrupt source is transparently wired to the appropriate
+ * controller. Thus drivers need not be aware of the
+ * interrupt-controller.
+ *
+ * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
+ * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
+ * (IO-APICs assumed to be messaging to Pentium local-APICs)
+ *
+ * the code is designed to be easily extended with new/different
+ * interrupt controllers, without having to do assembly magic.
+ */
+
+extern struct bridge_controller *irq_to_bridge[];
+extern int irq_to_slot[];
+
+/*
+ * use these macros to get the encoded nasid and widget id
+ * from the irq value
+ */
+#define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)]
+#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i]
+
+static inline int alloc_level(int cpu, int irq)
+{
+ struct hub_data *hub = hub_data(cpu_to_node(cpu));
+ struct slice_data *si = cpu_data[cpu].data;
+ int level;
+
+ level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
+ if (level >= LEVELS_PER_SLICE)
+ panic("Cpu %d flooded with devices", cpu);
+
+ __set_bit(level, hub->irq_alloc_mask);
+ si->level_to_irq[level] = irq;
+
+ return level;
+}
+
+static inline int find_level(cpuid_t *cpunum, int irq)
+{
+ int cpu, i;
+
+ for_each_online_cpu(cpu) {
+ struct slice_data *si = cpu_data[cpu].data;
+
+ for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
+ if (si->level_to_irq[i] == irq) {
+ *cpunum = cpu;
+
+ return i;
+ }
+ }
+
+ panic("Could not identify cpu/level for irq %d", irq);
+}
+
+static int intr_connect_level(int cpu, int bit)
+{
+ nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+ struct slice_data *si = cpu_data[cpu].data;
+
+ set_bit(bit, si->irq_enable_mask);
+
+ if (!cputoslice(cpu)) {
+ REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+ REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+ } else {
+ REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+ REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+ }
+
+ return 0;
+}
+
+static int intr_disconnect_level(int cpu, int bit)
+{
+ nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+ struct slice_data *si = cpu_data[cpu].data;
+
+ clear_bit(bit, si->irq_enable_mask);
+
+ if (!cputoslice(cpu)) {
+ REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+ REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+ } else {
+ REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+ REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+ }
+
+ return 0;
+}
+
+/* Startup one of the (PCI ...) IRQs routes over a bridge. */
+static unsigned int startup_bridge_irq(struct irq_data *d)
+{
+ struct bridge_controller *bc;
+ bridgereg_t device;
+ bridge_t *bridge;
+ int pin, swlevel;
+ cpuid_t cpu;
+
+ pin = SLOT_FROM_PCI_IRQ(d->irq);
+ bc = IRQ_TO_BRIDGE(d->irq);
+ bridge = bc->base;
+
+ pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", d->irq, pin);
+ /*
+ * "map" irq to a swlevel greater than 6 since the first 6 bits
+ * of INT_PEND0 are taken
+ */
+ swlevel = find_level(&cpu, d->irq);
+ bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
+ bridge->b_int_enable |= (1 << pin);
+ bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */
+
+ /*
+ * Enable sending of an interrupt clear packt to the hub on a high to
+ * low transition of the interrupt pin.
+ *
+ * IRIX sets additional bits in the address which are documented as
+ * reserved in the bridge docs.
+ */
+ bridge->b_int_mode |= (1UL << pin);
+
+ /*
+ * We assume the bridge to have a 1:1 mapping between devices
+ * (slots) and intr pins.
+ */
+ device = bridge->b_int_device;
+ device &= ~(7 << (pin*3));
+ device |= (pin << (pin*3));
+ bridge->b_int_device = device;
+
+ bridge->b_wid_tflush;
+
+ intr_connect_level(cpu, swlevel);
+
+ return 0; /* Never anything pending. */
+}
+
+/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */
+static void shutdown_bridge_irq(struct irq_data *d)
+{
+ struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
+ bridge_t *bridge = bc->base;
+ int pin, swlevel;
+ cpuid_t cpu;
+
+ pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
+ pin = SLOT_FROM_PCI_IRQ(d->irq);
+
+ /*
+ * map irq to a swlevel greater than 6 since the first 6 bits
+ * of INT_PEND0 are taken
+ */
+ swlevel = find_level(&cpu, d->irq);
+ intr_disconnect_level(cpu, swlevel);
+
+ bridge->b_int_enable &= ~(1 << pin);
+ bridge->b_wid_tflush;
+}
+
+static inline void enable_bridge_irq(struct irq_data *d)
+{
+ cpuid_t cpu;
+ int swlevel;
+
+ swlevel = find_level(&cpu, d->irq); /* Criminal offence */
+ intr_connect_level(cpu, swlevel);
+}
+
+static inline void disable_bridge_irq(struct irq_data *d)
+{
+ cpuid_t cpu;
+ int swlevel;
+
+ swlevel = find_level(&cpu, d->irq); /* Criminal offence */
+ intr_disconnect_level(cpu, swlevel);
+}
+
+static struct irq_chip bridge_irq_type = {
+ .name = "bridge",
+ .irq_startup = startup_bridge_irq,
+ .irq_shutdown = shutdown_bridge_irq,
+ .irq_mask = disable_bridge_irq,
+ .irq_unmask = enable_bridge_irq,
+};
+
+void register_bridge_irq(unsigned int irq)
+{
+ irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
+}
+
+int request_bridge_irq(struct bridge_controller *bc)
+{
+ int irq = allocate_irqno();
+ int swlevel, cpu;
+ nasid_t nasid;
+
+ if (irq < 0)
+ return irq;
+
+ /*
+ * "map" irq to a swlevel greater than 6 since the first 6 bits
+ * of INT_PEND0 are taken
+ */
+ cpu = bc->irq_cpu;
+ swlevel = alloc_level(cpu, irq);
+ if (unlikely(swlevel < 0)) {
+ free_irqno(irq);
+
+ return -EAGAIN;
+ }
+
+ /* Make sure it's not already pending when we connect it. */
+ nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+ REMOTE_HUB_CLR_INTR(nasid, swlevel);
+
+ intr_connect_level(cpu, swlevel);
+
+ register_bridge_irq(irq);
+
+ return irq;
+}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 2315cfeb2687..3fbaef97a1b8 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -29,7 +29,6 @@
#include <asm/mipsregs.h>
#include <asm/processor.h>
-#include <asm/pci/bridge.h>
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
@@ -54,50 +53,6 @@
extern asmlinkage void ip27_irq(void);
-extern struct bridge_controller *irq_to_bridge[];
-extern int irq_to_slot[];
-
-/*
- * use these macros to get the encoded nasid and widget id
- * from the irq value
- */
-#define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)]
-#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i]
-
-static inline int alloc_level(int cpu, int irq)
-{
- struct hub_data *hub = hub_data(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
- int level;
-
- level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
- if (level >= LEVELS_PER_SLICE)
- panic("Cpu %d flooded with devices", cpu);
-
- __set_bit(level, hub->irq_alloc_mask);
- si->level_to_irq[level] = irq;
-
- return level;
-}
-
-static inline int find_level(cpuid_t *cpunum, int irq)
-{
- int cpu, i;
-
- for_each_online_cpu(cpu) {
- struct slice_data *si = cpu_data[cpu].data;
-
- for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
- if (si->level_to_irq[i] == irq) {
- *cpunum = cpu;
-
- return i;
- }
- }
-
- panic("Could not identify cpu/level for irq %d", irq);
-}
-
/*
* Find first bit set
*/
@@ -204,175 +159,6 @@ static void ip27_hub_error(void)
panic("CPU %d got a hub error interrupt", smp_processor_id());
}
-static int intr_connect_level(int cpu, int bit)
-{
- nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
-
- set_bit(bit, si->irq_enable_mask);
-
- if (!cputoslice(cpu)) {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
- } else {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
- }
-
- return 0;
-}
-
-static int intr_disconnect_level(int cpu, int bit)
-{
- nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- struct slice_data *si = cpu_data[cpu].data;
-
- clear_bit(bit, si->irq_enable_mask);
-
- if (!cputoslice(cpu)) {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
- } else {
- REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
- REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
- }
-
- return 0;
-}
-
-/* Startup one of the (PCI ...) IRQs routes over a bridge. */
-static unsigned int startup_bridge_irq(struct irq_data *d)
-{
- struct bridge_controller *bc;
- bridgereg_t device;
- bridge_t *bridge;
- int pin, swlevel;
- cpuid_t cpu;
-
- pin = SLOT_FROM_PCI_IRQ(d->irq);
- bc = IRQ_TO_BRIDGE(d->irq);
- bridge = bc->base;
-
- pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", d->irq, pin);
- /*
- * "map" irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- swlevel = find_level(&cpu, d->irq);
- bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
- bridge->b_int_enable |= (1 << pin);
- bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */
-
- /*
- * Enable sending of an interrupt clear packt to the hub on a high to
- * low transition of the interrupt pin.
- *
- * IRIX sets additional bits in the address which are documented as
- * reserved in the bridge docs.
- */
- bridge->b_int_mode |= (1UL << pin);
-
- /*
- * We assume the bridge to have a 1:1 mapping between devices
- * (slots) and intr pins.
- */
- device = bridge->b_int_device;
- device &= ~(7 << (pin*3));
- device |= (pin << (pin*3));
- bridge->b_int_device = device;
-
- bridge->b_wid_tflush;
-
- intr_connect_level(cpu, swlevel);
-
- return 0; /* Never anything pending. */
-}
-
-/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */
-static void shutdown_bridge_irq(struct irq_data *d)
-{
- struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
- bridge_t *bridge = bc->base;
- int pin, swlevel;
- cpuid_t cpu;
-
- pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
- pin = SLOT_FROM_PCI_IRQ(d->irq);
-
- /*
- * map irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- swlevel = find_level(&cpu, d->irq);
- intr_disconnect_level(cpu, swlevel);
-
- bridge->b_int_enable &= ~(1 << pin);
- bridge->b_wid_tflush;
-}
-
-static inline void enable_bridge_irq(struct irq_data *d)
-{
- cpuid_t cpu;
- int swlevel;
-
- swlevel = find_level(&cpu, d->irq); /* Criminal offence */
- intr_connect_level(cpu, swlevel);
-}
-
-static inline void disable_bridge_irq(struct irq_data *d)
-{
- cpuid_t cpu;
- int swlevel;
-
- swlevel = find_level(&cpu, d->irq); /* Criminal offence */
- intr_disconnect_level(cpu, swlevel);
-}
-
-static struct irq_chip bridge_irq_type = {
- .name = "bridge",
- .irq_startup = startup_bridge_irq,
- .irq_shutdown = shutdown_bridge_irq,
- .irq_mask = disable_bridge_irq,
- .irq_unmask = enable_bridge_irq,
-};
-
-void register_bridge_irq(unsigned int irq)
-{
- irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
-}
-
-int request_bridge_irq(struct bridge_controller *bc)
-{
- int irq = allocate_irqno();
- int swlevel, cpu;
- nasid_t nasid;
-
- if (irq < 0)
- return irq;
-
- /*
- * "map" irq to a swlevel greater than 6 since the first 6 bits
- * of INT_PEND0 are taken
- */
- cpu = bc->irq_cpu;
- swlevel = alloc_level(cpu, irq);
- if (unlikely(swlevel < 0)) {
- free_irqno(irq);
-
- return -EAGAIN;
- }
-
- /* Make sure it's not already pending when we connect it. */
- nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
- REMOTE_HUB_CLR_INTR(nasid, swlevel);
-
- intr_connect_level(cpu, swlevel);
-
- register_bridge_irq(irq);
-
- return irq;
-}
-
asmlinkage void plat_irq_dispatch(void)
{
unsigned long pending = read_c0_cause() & read_c0_status();