Merge branch 'linus' into cpus4096

Conflicts:

	drivers/acpi/processor_throttling.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 388 insertions, 0 deletions

diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
new file mode 100644
index 000000000000..0b92d8c13208
--- /dev/null
+++ b/arch/mips/txx9/generic/pci.c
@@ -0,0 +1,388 @@
+/*
+ * linux/arch/mips/txx9/pci.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001-2005 MontaVista Software Inc.
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#include <linux/interrupt.h>
+#include <asm/i8259.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
+#endif
+
+static int __init
+early_read_config_word(struct pci_controller *hose,
+		       int top_bus, int bus, int devfn, int offset, u16 *value)
+{
+	struct pci_dev fake_dev;
+	struct pci_bus fake_bus;
+
+	fake_dev.bus = &fake_bus;
+	fake_dev.sysdata = hose;
+	fake_dev.devfn = devfn;
+	fake_bus.number = bus;
+	fake_bus.sysdata = hose;
+	fake_bus.ops = hose->pci_ops;
+
+	if (bus != top_bus)
+		/* Fake a parent bus structure. */
+		fake_bus.parent = &fake_bus;
+	else
+		fake_bus.parent = NULL;
+
+	return pci_read_config_word(&fake_dev, offset, value);
+}
+
+int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
+			    int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int cap66 = -1;
+	u16 stat;
+
+	/* It seems SLC90E66 needs some time after PCI reset... */
+	mdelay(80);
+
+	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID, &vid) !=
+		    PCIBIOS_SUCCESSFUL)
+			continue;
+		if (vid == 0xffff)
+			continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus,
+					       pci_devfn, PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG
+				       "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+static struct resource primary_pci_mem_res[2] = {
+	{ .name = "PCI MEM" },
+	{ .name = "PCI MMIO" },
+};
+static struct resource primary_pci_io_res = { .name = "PCI IO" };
+struct pci_controller txx9_primary_pcic = {
+	.mem_resource = &primary_pci_mem_res[0],
+	.io_resource = &primary_pci_io_res,
+};
+
+#ifdef CONFIG_64BIT
+int txx9_pci_mem_high __initdata = 1;
+#else
+int txx9_pci_mem_high __initdata;
+#endif
+
+/*
+ * allocate pci_controller and resources.
+ * mem_base, io_base: physical addresss.  0 for auto assignment.
+ * mem_size and io_size means max size on auto assignment.
+ * pcic must be &txx9_primary_pcic or NULL.
+ */
+struct pci_controller *__init
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+			  unsigned long mem_base, unsigned long mem_size,
+			  unsigned long io_base, unsigned long io_size)
+{
+	struct pcic {
+		struct pci_controller c;
+		struct resource r_mem[2];
+		struct resource r_io;
+	} *new = NULL;
+	int min_size = 0x10000;
+
+	if (!pcic) {
+		new = kzalloc(sizeof(*new), GFP_KERNEL);
+		if (!new)
+			return NULL;
+		new->r_mem[0].name = "PCI mem";
+		new->r_mem[1].name = "PCI mmio";
+		new->r_io.name = "PCI io";
+		new->c.mem_resource = new->r_mem;
+		new->c.io_resource = &new->r_io;
+		pcic = &new->c;
+	} else
+		BUG_ON(pcic != &txx9_primary_pcic);
+	pcic->io_resource->flags = IORESOURCE_IO;
+
+	/*
+	 * for auto assignment, first search a (big) region for PCI
+	 * MEM, then search a region for PCI IO.
+	 */
+	if (mem_base) {
+		pcic->mem_resource[0].start = mem_base;
+		pcic->mem_resource[0].end = mem_base + mem_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
+			goto free_and_exit;
+	} else {
+		unsigned long min = 0, max = 0x20000000; /* low 512MB */
+		if (!mem_size) {
+			/* default size for auto assignment */
+			if (txx9_pci_mem_high)
+				mem_size = 0x20000000;	/* mem:512M(max) */
+			else
+				mem_size = 0x08000000;	/* mem:128M(max) */
+		}
+		if (txx9_pci_mem_high) {
+			min = 0x20000000;
+			max = 0xe0000000;
+		}
+		/* search free region for PCI MEM */
+		for (; mem_size >= min_size; mem_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[0],
+					      mem_size, min, max,
+					      mem_size, NULL, NULL) == 0)
+				break;
+		}
+		if (mem_size < min_size)
+			goto free_and_exit;
+	}
+
+	pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (io_base) {
+		pcic->mem_resource[1].start = io_base;
+		pcic->mem_resource[1].end = io_base + io_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
+			goto release_and_exit;
+	} else {
+		if (!io_size)
+			/* default size for auto assignment */
+			io_size = 0x01000000;	/* io:16M(max) */
+		/* search free region for PCI IO in low 512MB */
+		for (; io_size >= min_size; io_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[1],
+					      io_size, 0, 0x20000000,
+					      io_size, NULL, NULL) == 0)
+				break;
+		}
+		if (io_size < min_size)
+			goto release_and_exit;
+		io_base = pcic->mem_resource[1].start;
+	}
+
+	pcic->mem_resource[0].flags = IORESOURCE_MEM;
+	if (pcic == &txx9_primary_pcic &&
+	    mips_io_port_base == (unsigned long)-1) {
+		/* map ioport 0 to PCI I/O space address 0 */
+		set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
+		pcic->io_resource->start = 0;
+		pcic->io_offset = 0;	/* busaddr == ioaddr */
+		pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
+	} else {
+		/* physaddr to ioaddr */
+		pcic->io_resource->start =
+			io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_map_base = mips_io_port_base;
+	}
+	pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
+
+	pcic->mem_offset = 0;	/* busaddr == physaddr */
+
+	printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n",
+	       (unsigned long long)pcic->mem_resource[1].start,
+	       (unsigned long long)pcic->mem_resource[1].end,
+	       (unsigned long long)pcic->mem_resource[0].start,
+	       (unsigned long long)pcic->mem_resource[0].end);
+
+	/* register_pci_controller() will request MEM resource */
+	release_resource(&pcic->mem_resource[0]);
+	return pcic;
+ release_and_exit:
+	release_resource(&pcic->mem_resource[0]);
+ free_and_exit:
+	kfree(new);
+	printk(KERN_ERR "PCI: Failed to allocate resources.\n");
+	return NULL;
+}
+
+static int __init
+txx9_arch_pci_init(void)
+{
+	PCIBIOS_MIN_IO = 0x8000;	/* reseve legacy I/O space */
+	return 0;
+}
+arch_initcall(txx9_arch_pci_init);
+
+/* IRQ/IDSEL mapping */
+int txx9_pci_option =
+#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
+	TXX9_PCI_OPT_PICMG |
+#endif
+	TXX9_PCI_OPT_CLK_AUTO;
+
+enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static irqreturn_t i8259_interrupt(int irq, void *dev_id)
+{
+	int isairq;
+
+	isairq = i8259_irq();
+	if (unlikely(isairq <= I8259A_IRQ_BASE))
+		return IRQ_NONE;
+	generic_handle_irq(isairq);
+	return IRQ_HANDLED;
+}
+
+static int __init
+txx9_i8259_irq_setup(int irq)
+{
+	int err;
+
+	init_i8259_irqs();
+	err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED,
+			  "cascade(i8259)", (void *)(long)irq);
+	if (!err)
+		printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
+	return err;
+}
+
+static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	int irq;	/* PCI/ISA Bridge interrupt */
+	u8 reg_64;
+	u32 reg_b0;
+	u8 reg_e1;
+	irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
+	if (!irq)
+		return;
+	txx9_i8259_irq_setup(irq);
+	pci_read_config_byte(dev, 0x64, &reg_64);
+	pci_read_config_dword(dev, 0xb0, &reg_b0);
+	pci_read_config_byte(dev, 0xe1, &reg_e1);
+	/* serial irq control */
+	reg_64 = 0xd0;
+	/* serial irq pin */
+	reg_b0 |= 0x00010000;
+	/* ide irq on isa14 */
+	reg_e1 &= 0xf0;
+	reg_e1 |= 0x0d;
+	pci_write_config_byte(dev, 0x64, reg_64);
+	pci_write_config_dword(dev, 0xb0, reg_b0);
+	pci_write_config_byte(dev, 0xe1, reg_e1);
+
+	smsc_fdc37m81x_init(0x3f0);
+	smsc_fdc37m81x_config_beg();
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
+				  SMSC_FDC37M81X_KBD);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
+				  1);
+	smsc_fdc37m81x_config_end();
+}
+
+static void quirk_slc90e66_ide(struct pci_dev *dev)
+{
+	unsigned char dat;
+	int regs[2] = {0x41, 0x43};
+	int i;
+
+	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
+	printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
+	/* enable SMSC SLC90E66 IDE */
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		pci_read_config_byte(dev, regs[i], &dat);
+		pci_write_config_byte(dev, regs[i], dat | 0x80);
+		pci_read_config_byte(dev, regs[i], &dat);
+		printk(KERN_CONT " IDETIM%d %02x", i, dat);
+	}
+	pci_read_config_byte(dev, 0x5c, &dat);
+	/*
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 *
+	 * This line of code is intended to provide the user with a work
+	 * around solution to the anomalies cited in SMSC's anomaly sheet
+	 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
+	 *
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 */
+	dat |= 0x01;
+	pci_write_config_byte(dev, regs[i], dat);
+	pci_read_config_byte(dev, 0x5c, &dat);
+	printk(KERN_CONT " REG5C %02x", dat);
+	printk(KERN_CONT "\n");
+}
+#endif /* CONFIG_TOSHIBA_FPCIB0 */
+
+static void final_fixup(struct pci_dev *dev)
+{
+	unsigned char bist;
+
+	/* Do build-in self test */
+	if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
+	    (bist & PCI_BIST_CAPABLE)) {
+		unsigned long timeout;
+		pci_set_power_state(dev, PCI_D0);
+		printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
+		pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
+		timeout = jiffies + HZ * 2;	/* timeout after 2 sec */
+		do {
+			pci_read_config_byte(dev, PCI_BIST, &bist);
+			if (time_after(jiffies, timeout))
+				break;
+		} while (bist & PCI_BIST_START);
+		if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
+			printk(KERN_CONT "failed. (0x%x)\n", bist);
+		else
+			printk(KERN_CONT "OK.\n");
+	}
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	quirk_slc90e66_bridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return txx9_board_vec->pci_map_irq(dev, slot, pin);
+}