termbits.h: Align lines & format

- Align c_cc defines.
- Remove extra newlines.
- Realign & adjust number of leading zeros.
- Reorder c_cflag defines to ascending order
- Make comment ending shorted (=remove period and one extra space from
  the comments in mips).

Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 78 insertions, 78 deletions

diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h
index b33f514315ce..8fa3e79d4f94 100644
--- a/arch/mips/include/uapi/asm/termbits.h
+++ b/arch/mips/include/uapi/asm/termbits.h
@@ -15,7 +15,7 @@
 
 #include <asm-generic/termbits-common.h>
 
-typedef unsigned int tcflag_t;
+typedef unsigned int	tcflag_t;
 
 /*
  * The ABI says nothing about NCC but seems to use NCCS as
@@ -54,64 +54,64 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VINTR		 0		/* Interrupt character [ISIG].	*/
-#define VQUIT		 1		/* Quit character [ISIG].  */
-#define VERASE		 2		/* Erase character [ICANON].  */
-#define VKILL		 3		/* Kill-line character [ICANON].  */
-#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON].  */
-#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON].  */
-#define VEOL2		 6		/* Second EOL character [ICANON].  */
+#define VINTR		 0		/* Interrupt character [ISIG] */
+#define VQUIT		 1		/* Quit character [ISIG] */
+#define VERASE		 2		/* Erase character [ICANON] */
+#define VKILL		 3		/* Kill-line character [ICANON] */
+#define VMIN		 4		/* Minimum number of bytes read at once [!ICANON] */
+#define VTIME		 5		/* Time-out value (tenths of a second) [!ICANON] */
+#define VEOL2		 6		/* Second EOL character [ICANON] */
 #define VSWTC		 7		/* ??? */
 #define VSWTCH		VSWTC
-#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF].  */
-#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF].  */
-#define VSUSP		10		/* Suspend character [ISIG].  */
+#define VSTART		 8		/* Start (X-ON) character [IXON, IXOFF] */
+#define VSTOP		 9		/* Stop (X-OFF) character [IXON, IXOFF] */
+#define VSUSP		10		/* Suspend character [ISIG] */
 #if 0
 /*
  * VDSUSP is not supported
  */
-#define VDSUSP		11		/* Delayed suspend character [ISIG].  */
+#define VDSUSP		11		/* Delayed suspend character [ISIG] */
 #endif
-#define VREPRINT	12		/* Reprint-line character [ICANON].  */
-#define VDISCARD	13		/* Discard character [IEXTEN].	*/
-#define VWERASE		14		/* Word-erase character [ICANON].  */
-#define VLNEXT		15		/* Literal-next character [IEXTEN].  */
-#define VEOF		16		/* End-of-file character [ICANON].  */
-#define VEOL		17		/* End-of-line character [ICANON].  */
+#define VREPRINT	12		/* Reprint-line character [ICANON] */
+#define VDISCARD	13		/* Discard character [IEXTEN] */
+#define VWERASE		14		/* Word-erase character [ICANON] */
+#define VLNEXT		15		/* Literal-next character [IEXTEN] */
+#define VEOF		16		/* End-of-file character [ICANON] */
+#define VEOL		17		/* End-of-line character [ICANON] */
 
 /* c_iflag bits */
-#define IUCLC	0x00200		/* Map upper case to lower case on input.  */
-#define IXON	0x00400		/* Enable start/stop output control.  */
-#define IXOFF	0x01000		/* Enable start/stop input control.  */
-#define IMAXBEL	0x02000		/* Ring bell when input queue is full.	*/
-#define IUTF8	0x04000		/* Input is UTF-8 */
+#define IUCLC	0x0200		/* Map upper case to lower case on input */
+#define IXON	0x0400		/* Enable start/stop output control */
+#define IXOFF	0x1000		/* Enable start/stop input control */
+#define IMAXBEL	0x2000		/* Ring bell when input queue is full */
+#define IUTF8	0x4000		/* Input is UTF-8 */
 
 /* c_oflag bits */
-#define OLCUC	0x00002		/* Map lower case to upper case on output.  */
-#define ONLCR	0x00004		/* Map NL to CR-NL on output.  */
+#define OLCUC	0x00002		/* Map lower case to upper case on output */
+#define ONLCR	0x00004		/* Map NL to CR-NL on output */
 #define NLDLY	0x00100
-#define	  NL0	0x00000
-#define	  NL1	0x00100
+#define   NL0	0x00000
+#define   NL1	0x00100
 #define CRDLY	0x00600
-#define	  CR0	0x00000
-#define	  CR1	0x00200
-#define	  CR2	0x00400
-#define	  CR3	0x00600
+#define   CR0	0x00000
+#define   CR1	0x00200
+#define   CR2	0x00400
+#define   CR3	0x00600
 #define TABDLY	0x01800
-#define	  TAB0	0x00000
-#define	  TAB1	0x00800
-#define	  TAB2	0x01000
-#define	  TAB3	0x01800
-#define	  XTABS	0x01800
+#define   TAB0	0x00000
+#define   TAB1	0x00800
+#define   TAB2	0x01000
+#define   TAB3	0x01800
+#define   XTABS	0x01800
 #define BSDLY	0x02000
-#define	  BS0	0x00000
-#define	  BS1	0x02000
+#define   BS0	0x00000
+#define   BS1	0x02000
 #define VTDLY	0x04000
-#define	  VT0	0x00000
-#define	  VT1	0x04000
+#define   VT0	0x00000
+#define   VT1	0x04000
 #define FFDLY	0x08000
-#define	  FF0	0x00000
-#define	  FF1	0x08000
+#define   FF0	0x00000
+#define   FF1	0x08000
 /*
 #define PAGEOUT ???
 #define WRAP	???
@@ -120,10 +120,10 @@ struct ktermios {
 /* c_cflag bit meaning */
 #define CBAUD		0x0000100f
 #define CSIZE		0x00000030	/* Number of bits per byte (mask) */
-#define	  CS5		0x00000000	/* 5 bits per byte */
-#define	  CS6		0x00000010	/* 6 bits per byte */
-#define	  CS7		0x00000020	/* 7 bits per byte */
-#define	  CS8		0x00000030	/* 8 bits per byte */
+#define   CS5		0x00000000	/* 5 bits per byte */
+#define   CS6		0x00000010	/* 6 bits per byte */
+#define   CS7		0x00000020	/* 7 bits per byte */
+#define   CS8		0x00000030	/* 8 bits per byte */
 #define CSTOPB		0x00000040	/* Two stop bits instead of one */
 #define CREAD		0x00000080	/* Enable receiver */
 #define PARENB		0x00000100	/* Parity enable */
@@ -131,40 +131,40 @@ struct ktermios {
 #define HUPCL		0x00000400	/* Hang up on last close */
 #define CLOCAL		0x00000800	/* Ignore modem status lines */
 #define CBAUDEX		0x00001000
-#define	   BOTHER	0x00001000
-#define	   B57600	0x00001001
-#define	  B115200	0x00001002
-#define	  B230400	0x00001003
-#define	  B460800	0x00001004
-#define	  B500000	0x00001005
-#define	  B576000	0x00001006
-#define	  B921600	0x00001007
-#define	 B1000000	0x00001008
-#define	 B1152000	0x00001009
-#define	 B1500000	0x0000100a
-#define	 B2000000	0x0000100b
-#define	 B2500000	0x0000100c
-#define	 B3000000	0x0000100d
-#define	 B3500000	0x0000100e
-#define	 B4000000	0x0000100f
+#define BOTHER		0x00001000
+#define     B57600	0x00001001
+#define    B115200	0x00001002
+#define    B230400	0x00001003
+#define    B460800	0x00001004
+#define    B500000	0x00001005
+#define    B576000	0x00001006
+#define    B921600	0x00001007
+#define   B1000000	0x00001008
+#define   B1152000	0x00001009
+#define   B1500000	0x0000100a
+#define   B2000000	0x0000100b
+#define   B2500000	0x0000100c
+#define   B3000000	0x0000100d
+#define   B3500000	0x0000100e
+#define   B4000000	0x0000100f
 #define CIBAUD		0x100f0000	/* input baud rate */
 
 /* c_lflag bits */
-#define ISIG	0x00001		/* Enable signals.  */
-#define ICANON	0x00002		/* Do erase and kill processing.  */
+#define ISIG	0x00001		/* Enable signals */
+#define ICANON	0x00002		/* Do erase and kill processing */
 #define XCASE	0x00004
-#define ECHO	0x00008		/* Enable echo.	 */
-#define ECHOE	0x00010		/* Visual erase for ERASE.  */
-#define ECHOK	0x00020		/* Echo NL after KILL.	*/
-#define ECHONL	0x00040		/* Echo NL even if ECHO is off.	 */
-#define NOFLSH	0x00080		/* Disable flush after interrupt.  */
-#define IEXTEN	0x00100		/* Enable DISCARD and LNEXT.  */
-#define ECHOCTL	0x00200		/* Echo control characters as ^X.  */
-#define ECHOPRT	0x00400		/* Hardcopy visual erase.  */
-#define ECHOKE	0x00800		/* Visual erase for KILL.  */
+#define ECHO	0x00008		/* Enable echo */
+#define ECHOE	0x00010		/* Visual erase for ERASE */
+#define ECHOK	0x00020		/* Echo NL after KILL */
+#define ECHONL	0x00040		/* Echo NL even if ECHO is off */
+#define NOFLSH	0x00080		/* Disable flush after interrupt */
+#define IEXTEN	0x00100		/* Enable DISCARD and LNEXT */
+#define ECHOCTL	0x00200		/* Echo control characters as ^X */
+#define ECHOPRT	0x00400		/* Hardcopy visual erase */
+#define ECHOKE	0x00800		/* Visual erase for KILL */
 #define FLUSHO	0x02000
-#define PENDIN	0x04000		/* Retype pending input (state).  */
-#define TOSTOP	0x08000		/* Send SIGTTOU for background output.	*/
+#define PENDIN	0x04000		/* Retype pending input (state) */
+#define TOSTOP	0x08000		/* Send SIGTTOU for background output */
 #define ITOSTOP	TOSTOP
 #define EXTPROC	0x10000		/* External processing on pty */
 
@@ -172,8 +172,8 @@ struct ktermios {
 #define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 
 /* tcsetattr uses these */
-#define TCSANOW		TCSETS	/* Change immediately.	*/
-#define TCSADRAIN	TCSETSW /* Change when pending output is written.  */
-#define TCSAFLUSH	TCSETSF /* Flush pending input before changing.	 */
+#define TCSANOW		TCSETS	/* Change immediately */
+#define TCSADRAIN	TCSETSW /* Change when pending output is written */
+#define TCSAFLUSH	TCSETSF /* Flush pending input before changing */
 
 #endif /* _ASM_TERMBITS_H */