UAPI: (Scripted) Disintegrate arch/parisc/include/asm

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 1 insertions, 422 deletions

diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
index 7f0f2d23059d..7eb616e4bf8a 100644
--- a/arch/parisc/include/asm/pdc.h
+++ b/arch/parisc/include/asm/pdc.h
@@ -1,348 +1,10 @@
 #ifndef _PARISC_PDC_H
 #define _PARISC_PDC_H
 
-/*
- *	PDC return values ...
- *	All PDC calls return a subset of these errors. 
- */
-
-#define PDC_WARN		  3	/* Call completed with a warning */
-#define PDC_REQ_ERR_1		  2	/* See above			 */
-#define PDC_REQ_ERR_0		  1	/* Call would generate a requestor error */
-#define PDC_OK			  0	/* Call completed successfully	*/
-#define PDC_BAD_PROC		 -1	/* Called non-existent procedure*/
-#define PDC_BAD_OPTION		 -2	/* Called with non-existent option */
-#define PDC_ERROR		 -3	/* Call could not complete without an error */
-#define PDC_NE_MOD		 -5	/* Module not found		*/
-#define PDC_NE_CELL_MOD		 -7	/* Cell module not found	*/
-#define PDC_INVALID_ARG		-10	/* Called with an invalid argument */
-#define PDC_BUS_POW_WARN	-12	/* Call could not complete in allowed power budget */
-#define PDC_NOT_NARROW		-17	/* Narrow mode not supported	*/
-
-/*
- *	PDC entry points...
- */
-
-#define PDC_POW_FAIL	1		/* perform a power-fail		*/
-#define PDC_POW_FAIL_PREPARE	0	/* prepare for powerfail	*/
-
-#define PDC_CHASSIS	2		/* PDC-chassis functions	*/
-#define PDC_CHASSIS_DISP	0	/* update chassis display	*/
-#define PDC_CHASSIS_WARN	1	/* return chassis warnings	*/
-#define PDC_CHASSIS_DISPWARN	2	/* update&return chassis status */
-#define PDC_RETURN_CHASSIS_INFO 128	/* HVERSION dependent: return chassis LED/LCD info  */
-
-#define PDC_PIM         3               /* Get PIM data                 */
-#define PDC_PIM_HPMC            0       /* Transfer HPMC data           */
-#define PDC_PIM_RETURN_SIZE     1       /* Get Max buffer needed for PIM*/
-#define PDC_PIM_LPMC            2       /* Transfer HPMC data           */
-#define PDC_PIM_SOFT_BOOT       3       /* Transfer Soft Boot data      */
-#define PDC_PIM_TOC             4       /* Transfer TOC data            */
-
-#define PDC_MODEL	4		/* PDC model information call	*/
-#define PDC_MODEL_INFO		0	/* returns information 		*/
-#define PDC_MODEL_BOOTID	1	/* set the BOOT_ID		*/
-#define PDC_MODEL_VERSIONS	2	/* returns cpu-internal versions*/
-#define PDC_MODEL_SYSMODEL	3	/* return system model info	*/
-#define PDC_MODEL_ENSPEC	4	/* enable specific option	*/
-#define PDC_MODEL_DISPEC	5	/* disable specific option	*/
-#define PDC_MODEL_CPU_ID	6	/* returns cpu-id (only newer machines!) */
-#define PDC_MODEL_CAPABILITIES	7	/* returns OS32/OS64-flags	*/
-/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
-#define  PDC_MODEL_OS64			(1 << 0)
-#define  PDC_MODEL_OS32			(1 << 1)
-#define  PDC_MODEL_IOPDIR_FDC		(1 << 2)
-#define  PDC_MODEL_NVA_MASK		(3 << 4)
-#define  PDC_MODEL_NVA_SUPPORTED	(0 << 4)
-#define  PDC_MODEL_NVA_SLOW		(1 << 4)
-#define  PDC_MODEL_NVA_UNSUPPORTED	(3 << 4)
-#define PDC_MODEL_GET_BOOT__OP	8	/* returns boot test options	*/
-#define PDC_MODEL_SET_BOOT__OP	9	/* set boot test options	*/
-
-#define PA89_INSTRUCTION_SET	0x4	/* capatibilies returned	*/
-#define PA90_INSTRUCTION_SET	0x8
-
-#define PDC_CACHE	5		/* return/set cache (& TLB) info*/
-#define PDC_CACHE_INFO		0	/* returns information 		*/
-#define PDC_CACHE_SET_COH	1	/* set coherence state		*/
-#define PDC_CACHE_RET_SPID	2	/* returns space-ID bits	*/
-
-#define PDC_HPA		6		/* return HPA of processor	*/
-#define PDC_HPA_PROCESSOR	0
-#define PDC_HPA_MODULES		1
-
-#define PDC_COPROC	7		/* Co-Processor (usually FP unit(s)) */
-#define PDC_COPROC_CFG		0	/* Co-Processor Cfg (FP unit(s) enabled?) */
-
-#define PDC_IODC	8		/* talk to IODC			*/
-#define PDC_IODC_READ		0	/* read IODC entry point	*/
-/*      PDC_IODC_RI_			 * INDEX parameter of PDC_IODC_READ */
-#define PDC_IODC_RI_DATA_BYTES	0	/* IODC Data Bytes		*/
-/*				1, 2	   obsolete - HVERSION dependent*/
-#define PDC_IODC_RI_INIT	3	/* Initialize module		*/
-#define PDC_IODC_RI_IO		4	/* Module input/output		*/
-#define PDC_IODC_RI_SPA		5	/* Module input/output		*/
-#define PDC_IODC_RI_CONFIG	6	/* Module input/output		*/
-/*				7	  obsolete - HVERSION dependent */
-#define PDC_IODC_RI_TEST	8	/* Module input/output		*/
-#define PDC_IODC_RI_TLB		9	/* Module input/output		*/
-#define PDC_IODC_NINIT		2	/* non-destructive init		*/
-#define PDC_IODC_DINIT		3	/* destructive init		*/
-#define PDC_IODC_MEMERR		4	/* check for memory errors	*/
-#define PDC_IODC_INDEX_DATA	0	/* get first 16 bytes from mod IODC */
-#define PDC_IODC_BUS_ERROR	-4	/* bus error return value	*/
-#define PDC_IODC_INVALID_INDEX	-5	/* invalid index return value	*/
-#define PDC_IODC_COUNT		-6	/* count is too small		*/
-
-#define PDC_TOD		9		/* time-of-day clock (TOD)	*/
-#define PDC_TOD_READ		0	/* read TOD			*/
-#define PDC_TOD_WRITE		1	/* write TOD			*/
-
-
-#define PDC_STABLE	10		/* stable storage (sprockets)	*/
-#define PDC_STABLE_READ		0
-#define PDC_STABLE_WRITE	1
-#define PDC_STABLE_RETURN_SIZE	2
-#define PDC_STABLE_VERIFY_CONTENTS 3
-#define PDC_STABLE_INITIALIZE	4
-
-#define PDC_NVOLATILE	11		/* often not implemented	*/
-
-#define PDC_ADD_VALID	12		/* Memory validation PDC call	*/
-#define PDC_ADD_VALID_VERIFY	0	/* Make PDC_ADD_VALID verify region */
-
-#define PDC_INSTR	15		/* get instr to invoke PDCE_CHECK() */
-
-#define PDC_PROC	16		/* (sprockets)			*/
-
-#define PDC_CONFIG	16		/* (sprockets)			*/
-#define PDC_CONFIG_DECONFIG	0
-#define PDC_CONFIG_DRECONFIG	1
-#define PDC_CONFIG_DRETURN_CONFIG 2
-
-#define PDC_BLOCK_TLB	18		/* manage hardware block-TLB	*/
-#define PDC_BTLB_INFO		0	/* returns parameter 		*/
-#define PDC_BTLB_INSERT		1	/* insert BTLB entry		*/
-#define PDC_BTLB_PURGE		2	/* purge BTLB entries 		*/
-#define PDC_BTLB_PURGE_ALL	3	/* purge all BTLB entries 	*/
-
-#define PDC_TLB		19		/* manage hardware TLB miss handling */
-#define PDC_TLB_INFO		0	/* returns parameter 		*/
-#define PDC_TLB_SETUP		1	/* set up miss handling 	*/
-
-#define PDC_MEM		20		/* Manage memory		*/
-#define PDC_MEM_MEMINFO		0
-#define PDC_MEM_ADD_PAGE	1
-#define PDC_MEM_CLEAR_PDT	2
-#define PDC_MEM_READ_PDT	3
-#define PDC_MEM_RESET_CLEAR	4
-#define PDC_MEM_GOODMEM		5
-#define PDC_MEM_TABLE		128	/* Non contig mem map (sprockets) */
-#define PDC_MEM_RETURN_ADDRESS_TABLE	PDC_MEM_TABLE
-#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE	131
-#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES	132
-#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
-
-#define PDC_MEM_RET_SBE_REPLACED	5	/* PDC_MEM return values */
-#define PDC_MEM_RET_DUPLICATE_ENTRY	4
-#define PDC_MEM_RET_BUF_SIZE_SMALL	1
-#define PDC_MEM_RET_PDT_FULL		-11
-#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
-
-#define PDC_PSW		21		/* Get/Set default System Mask  */
-#define PDC_PSW_MASK		0	/* Return mask                  */
-#define PDC_PSW_GET_DEFAULTS	1	/* Return defaults              */
-#define PDC_PSW_SET_DEFAULTS	2	/* Set default                  */
-#define PDC_PSW_ENDIAN_BIT	1	/* set for big endian           */
-#define PDC_PSW_WIDE_BIT	2	/* set for wide mode            */ 
-
-#define PDC_SYSTEM_MAP	22		/* find system modules		*/
-#define PDC_FIND_MODULE 	0
-#define PDC_FIND_ADDRESS	1
-#define PDC_TRANSLATE_PATH	2
-
-#define PDC_SOFT_POWER	23		/* soft power switch		*/
-#define PDC_SOFT_POWER_INFO	0	/* return info about the soft power switch */
-#define PDC_SOFT_POWER_ENABLE	1	/* enable/disable soft power switch */
-
-
-/* HVERSION dependent */
-
-/* The PDC_MEM_MAP calls */
-#define PDC_MEM_MAP	128		/* on s700: return page info	*/
-#define PDC_MEM_MAP_HPA		0	/* returns hpa of a module	*/
-
-#define PDC_EEPROM	129		/* EEPROM access		*/
-#define PDC_EEPROM_READ_WORD	0
-#define PDC_EEPROM_WRITE_WORD	1
-#define PDC_EEPROM_READ_BYTE	2
-#define PDC_EEPROM_WRITE_BYTE	3
-#define PDC_EEPROM_EEPROM_PASSWORD -1000
-
-#define PDC_NVM		130		/* NVM (non-volatile memory) access */
-#define PDC_NVM_READ_WORD	0
-#define PDC_NVM_WRITE_WORD	1
-#define PDC_NVM_READ_BYTE	2
-#define PDC_NVM_WRITE_BYTE	3
-
-#define PDC_SEED_ERROR	132		/* (sprockets)			*/
-
-#define PDC_IO		135		/* log error info, reset IO system */
-#define PDC_IO_READ_AND_CLEAR_ERRORS	0
-#define PDC_IO_RESET			1
-#define PDC_IO_RESET_DEVICES		2
-/* sets bits 6&7 (little endian) of the HcControl Register */
-#define PDC_IO_USB_SUSPEND	0xC000000000000000
-#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL	-5	/* return value */
-#define PDC_IO_NO_SUSPEND		-6	/* return value */
-
-#define PDC_BROADCAST_RESET 136		/* reset all processors		*/
-#define PDC_DO_RESET		0	/* option: perform a broadcast reset */
-#define PDC_DO_FIRM_TEST_RESET	1	/* Do broadcast reset with bitmap */
-#define PDC_BR_RECONFIGURATION	2	/* reset w/reconfiguration	*/
-#define PDC_FIRM_TEST_MAGIC	0xab9ec36fUL    /* for this reboot only	*/
-
-#define PDC_LAN_STATION_ID 138		/* Hversion dependent mechanism for */
-#define PDC_LAN_STATION_ID_READ	0	/* getting the lan station address  */
-
-#define	PDC_LAN_STATION_ID_SIZE	6
-
-#define PDC_CHECK_RANGES 139		/* (sprockets)			*/
-
-#define PDC_NV_SECTIONS	141		/* (sprockets)			*/
-
-#define PDC_PERFORMANCE	142		/* performance monitoring	*/
-
-#define PDC_SYSTEM_INFO	143		/* system information		*/
-#define PDC_SYSINFO_RETURN_INFO_SIZE	0
-#define PDC_SYSINFO_RRETURN_SYS_INFO	1
-#define PDC_SYSINFO_RRETURN_ERRORS	2
-#define PDC_SYSINFO_RRETURN_WARNINGS	3
-#define PDC_SYSINFO_RETURN_REVISIONS	4
-#define PDC_SYSINFO_RRETURN_DIAGNOSE	5
-#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE	1005
-
-#define PDC_RDR		144		/* (sprockets)			*/
-#define PDC_RDR_READ_BUFFER	0
-#define PDC_RDR_READ_SINGLE	1
-#define PDC_RDR_WRITE_SINGLE	2
-
-#define PDC_INTRIGUE	145 		/* (sprockets)			*/
-#define PDC_INTRIGUE_WRITE_BUFFER 	 0
-#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
-#define PDC_INTRIGUE_START_CPU_COUNTERS	 2
-#define PDC_INTRIGUE_STOP_CPU_COUNTERS	 3
-
-#define PDC_STI		146 		/* STI access			*/
-/* same as PDC_PCI_XXX values (see below) */
-
-/* Legacy PDC definitions for same stuff */
-#define PDC_PCI_INDEX	147
-#define PDC_PCI_INTERFACE_INFO		0
-#define PDC_PCI_SLOT_INFO		1
-#define PDC_PCI_INFLIGHT_BYTES		2
-#define PDC_PCI_READ_CONFIG		3
-#define PDC_PCI_WRITE_CONFIG		4
-#define PDC_PCI_READ_PCI_IO		5
-#define PDC_PCI_WRITE_PCI_IO		6
-#define PDC_PCI_READ_CONFIG_DELAY	7
-#define PDC_PCI_UPDATE_CONFIG_DELAY	8
-#define PDC_PCI_PCI_PATH_TO_PCI_HPA	9
-#define PDC_PCI_PCI_HPA_TO_PCI_PATH	10
-#define PDC_PCI_PCI_PATH_TO_PCI_BUS	11
-#define PDC_PCI_PCI_RESERVED		12
-#define PDC_PCI_PCI_INT_ROUTE_SIZE	13
-#define PDC_PCI_GET_INT_TBL_SIZE	PDC_PCI_PCI_INT_ROUTE_SIZE
-#define PDC_PCI_PCI_INT_ROUTE		14
-#define PDC_PCI_GET_INT_TBL		PDC_PCI_PCI_INT_ROUTE 
-#define PDC_PCI_READ_MON_TYPE		15
-#define PDC_PCI_WRITE_MON_TYPE		16
-
-
-/* Get SCSI Interface Card info:  SDTR, SCSI ID, mode (SE vs LVD) */
-#define PDC_INITIATOR	163
-#define PDC_GET_INITIATOR	0
-#define PDC_SET_INITIATOR	1
-#define PDC_DELETE_INITIATOR	2
-#define PDC_RETURN_TABLE_SIZE	3
-#define PDC_RETURN_TABLE	4
-
-#define PDC_LINK	165 		/* (sprockets)			*/
-#define PDC_LINK_PCI_ENTRY_POINTS	0  /* list (Arg1) = 0 */
-#define PDC_LINK_USB_ENTRY_POINTS	1  /* list (Arg1) = 1 */
-
-/* cl_class
- * page 3-33 of IO-Firmware ARS
- * IODC ENTRY_INIT(Search first) RET[1]
- */
-#define	CL_NULL		0	/* invalid */
-#define	CL_RANDOM	1	/* random access (as disk) */
-#define	CL_SEQU		2	/* sequential access (as tape) */
-#define	CL_DUPLEX	7	/* full-duplex point-to-point (RS-232, Net) */
-#define	CL_KEYBD	8	/* half-duplex console (HIL Keyboard) */
-#define	CL_DISPL	9	/* half-duplex console (display) */
-#define	CL_FC		10	/* FiberChannel access media */
-
-/* IODC ENTRY_INIT() */
-#define ENTRY_INIT_SRCH_FRST	2
-#define ENTRY_INIT_SRCH_NEXT	3
-#define ENTRY_INIT_MOD_DEV	4
-#define ENTRY_INIT_DEV		5
-#define ENTRY_INIT_MOD		6
-#define ENTRY_INIT_MSG		9
-
-/* IODC ENTRY_IO() */
-#define ENTRY_IO_BOOTIN		0
-#define ENTRY_IO_BOOTOUT	1
-#define ENTRY_IO_CIN		2
-#define ENTRY_IO_COUT		3
-#define ENTRY_IO_CLOSE		4
-#define ENTRY_IO_GETMSG		9
-#define ENTRY_IO_BBLOCK_IN	16
-#define ENTRY_IO_BBLOCK_OUT	17
-
-/* IODC ENTRY_SPA() */
-
-/* IODC ENTRY_CONFIG() */
-
-/* IODC ENTRY_TEST() */
-
-/* IODC ENTRY_TLB() */
-
-/* constants for OS (NVM...) */
-#define OS_ID_NONE		0	/* Undefined OS ID	*/
-#define OS_ID_HPUX		1	/* HP-UX OS		*/
-#define OS_ID_MPEXL		2	/* MPE XL OS		*/
-#define OS_ID_OSF		3	/* OSF OS		*/
-#define OS_ID_HPRT		4	/* HP-RT OS		*/
-#define OS_ID_NOVEL		5	/* NOVELL OS		*/
-#define OS_ID_LINUX		6	/* Linux		*/
-
-
-/* constants for PDC_CHASSIS */
-#define OSTAT_OFF		0
-#define OSTAT_FLT		1 
-#define OSTAT_TEST		2
-#define OSTAT_INIT		3
-#define OSTAT_SHUT		4
-#define OSTAT_WARN		5
-#define OSTAT_RUN		6
-#define OSTAT_ON		7
-
-/* Page Zero constant offsets used by the HPMC handler */
-#define BOOT_CONSOLE_HPA_OFFSET  0x3c0
-#define BOOT_CONSOLE_SPA_OFFSET  0x3c4
-#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
-
-/* size of the pdc_result buffer for firmware.c */
-#define NUM_PDC_RESULT	32
+#include <uapi/asm/pdc.h>
 
 #if !defined(__ASSEMBLY__)
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-
 extern int pdc_type;
 
 /* Values for pdc_type */
@@ -673,88 +335,5 @@ static inline char * os_id_to_string(u16 os_id) {
 	}
 }
 
-#endif /* __KERNEL__ */
-
-/* flags of the device_path */
-#define	PF_AUTOBOOT	0x80
-#define	PF_AUTOSEARCH	0x40
-#define	PF_TIMER	0x0F
-
-struct device_path {		/* page 1-69 */
-	unsigned char flags;	/* flags see above! */
-	unsigned char bc[6];	/* bus converter routing info */
-	unsigned char mod;
-	unsigned int  layers[6];/* device-specific layer-info */
-} __attribute__((aligned(8))) ;
-
-struct pz_device {
-	struct	device_path dp;	/* see above */
-	/* struct	iomod *hpa; */
-	unsigned int hpa;	/* HPA base address */
-	/* char	*spa; */
-	unsigned int spa;	/* SPA base address */
-	/* int	(*iodc_io)(struct iomod*, ...); */
-	unsigned int iodc_io;	/* device entry point */
-	short	pad;		/* reserved */
-	unsigned short cl_class;/* see below */
-} __attribute__((aligned(8))) ;
-
-struct zeropage {
-	/* [0x000] initialize vectors (VEC) */
-	unsigned int	vec_special;		/* must be zero */
-	/* int	(*vec_pow_fail)(void);*/
-	unsigned int	vec_pow_fail; /* power failure handler */
-	/* int	(*vec_toc)(void); */
-	unsigned int	vec_toc;
-	unsigned int	vec_toclen;
-	/* int	(*vec_rendz)(void); */
-	unsigned int vec_rendz;
-	int	vec_pow_fail_flen;
-	int	vec_pad[10];		
-	
-	/* [0x040] reserved processor dependent */
-	int	pad0[112];
-
-	/* [0x200] reserved */
-	int	pad1[84];
-
-	/* [0x350] memory configuration (MC) */
-	int	memc_cont;		/* contiguous mem size (bytes) */
-	int	memc_phsize;		/* physical memory size */
-	int	memc_adsize;		/* additional mem size, bytes of SPA space used by PDC */
-	unsigned int mem_pdc_hi;	/* used for 64-bit */
-
-	/* [0x360] various parameters for the boot-CPU */
-	/* unsigned int *mem_booterr[8]; */
-	unsigned int mem_booterr[8];	/* ptr to boot errors */
-	unsigned int mem_free;		/* first location, where OS can be loaded */
-	/* struct iomod *mem_hpa; */
-	unsigned int mem_hpa;		/* HPA of the boot-CPU */
-	/* int (*mem_pdc)(int, ...); */
-	unsigned int mem_pdc;		/* PDC entry point */
-	unsigned int mem_10msec;	/* number of clock ticks in 10msec */
-
-	/* [0x390] initial memory module (IMM) */
-	/* struct iomod *imm_hpa; */
-	unsigned int imm_hpa;		/* HPA of the IMM */
-	int	imm_soft_boot;		/* 0 = was hard boot, 1 = was soft boot */
-	unsigned int	imm_spa_size;		/* SPA size of the IMM in bytes */
-	unsigned int	imm_max_mem;		/* bytes of mem in IMM */
-
-	/* [0x3A0] boot console, display device and keyboard */
-	struct pz_device mem_cons;	/* description of console device */
-	struct pz_device mem_boot;	/* description of boot device */
-	struct pz_device mem_kbd;	/* description of keyboard device */
-
-	/* [0x430] reserved */
-	int	pad430[116];
-
-	/* [0x600] processor dependent */
-	__u32	pad600[1];
-	__u32	proc_sti;		/* pointer to STI ROM */
-	__u32	pad608[126];
-};
-
 #endif /* !defined(__ASSEMBLY__) */
-
 #endif /* _PARISC_PDC_H */