diff options
author | Zhicheng Fan <b32736@freescale.com> | 2012-02-10 07:48:16 +0100 |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2012-03-16 17:03:44 +0100 |
commit | 950740098c6745d69056b3acb5090ca9d8aa918c (patch) | |
tree | 20d93f6d476f0992b63d650d72f72181057789f8 /arch/powerpc/boot | |
parent | powerpc/85xx: Add p1020rdb-pc platform support (diff) | |
download | linux-950740098c6745d69056b3acb5090ca9d8aa918c.tar.xz linux-950740098c6745d69056b3acb5090ca9d8aa918c.zip |
powerpc/85xx: Add dts for p1020rdb-pc board
P1020RDB-PC Overview
------------------
1Gbyte DDR3 SDRAM
32 Mbyte NAND flash
10 16Mbyte NOR flash
16 Mbyte SPI flash
SD connector to interface with the SD memory card
Real-time clock on I2C bus
PCIe:
- x1 PCIe slot
- x1 mini-PCIe slot
10/100/1000 BaseT Ethernet ports:
- eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch
- eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221
- eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021
USB 2.0 port:
- Two USB2.0 Type A receptacles
- One USB2.0 signal to Mini PCIe slot
Dual RJ45 UART ports:
- DUART interface: supports two UARTs up to 115200 bps for console display
Signed-off-by: Zhicheng Fan <b32736@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/boot')
-rw-r--r-- | arch/powerpc/boot/dts/p1020rdb-pc.dtsi | 247 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/p1020rdb-pc_32b.dts | 90 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/p1020rdb-pc_36b.dts | 90 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts | 64 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts | 142 |
5 files changed, 633 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi new file mode 100644 index 000000000000..c952cd37cf6d --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts new file mode 100644 index 000000000000..4de69b726dc5 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts new file mode 100644 index 000000000000..5237da7441bc --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00040000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts new file mode 100644 index 000000000000..f411515937ec --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts @@ -0,0 +1,64 @@ +/* + * P1020 RDB-PC Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + serial1: serial@4600 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + pic-no-reset; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts new file mode 100644 index 000000000000..a91335ad82c2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts @@ -0,0 +1,142 @@ +/* + * P1020 RDB-PC Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + pic-no-reset; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; |