powerpc: Change places using CONFIG_KEXEC to use CONFIG_KEXEC_CORE instead.

Commit 2965faa5e03d ("kexec: split kexec_load syscall from kexec core
code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether
the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE
means whether the kexec_file_load system call should be compiled-in.
These options can be set independently from each other.

Since until now powerpc only supported kexec_load, CONFIG_KEXEC and
CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we
need to make a distinction. Almost all places where CONFIG_KEXEC was
being used should be using CONFIG_KEXEC_CORE instead, since
kexec_file_load also needs that code compiled in.

Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

8 files changed, 14 insertions, 14 deletions

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 7a9f7164cc2e..68a6a3c8322e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -109,7 +109,7 @@ pci64-$(CONFIG_PPC64)		+= pci_dn.o pci-hotplug.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(BITS).o $(pci64-y) \
 				   pci-common.o pci_of_scan.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
+obj-$(CONFIG_KEXEC_CORE)	+= machine_kexec.o crash.o \
 				   machine_kexec_$(BITS).o
 obj-$(CONFIG_AUDIT)		+= audit.o
 obj64-$(CONFIG_AUDIT)		+= compat_audit.o
@@ -130,7 +130,7 @@ obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM)	+= tm.o
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 obj-$(CONFIG_PPC32)		+= $(obj32-y)
 
-ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
+ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC_CORE),)
 obj-y				+= ppc_save_regs.o
 endif
 
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index bdb4612491a9..1dc5eae2ced3 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -160,7 +160,7 @@ __secondary_hold:
 	cmpdi	0,r12,0
 	beq	100b
 
-#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC_CORE)
 #ifdef CONFIG_PPC_BOOK3E
 	tovirt(r12,r12)
 #endif
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 93cf7a5846a6..1863324c6a3c 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -614,7 +614,7 @@ _GLOBAL(start_secondary_resume)
 _GLOBAL(__main)
 	blr
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 	/*
 	 * Must be relocatable PIC code callable as a C function.
 	 */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 4f178671f230..32be2a844947 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -478,7 +478,7 @@ _GLOBAL(kexec_wait)
 	addi	r5,r5,kexec_flag-1b
 
 99:	HMT_LOW
-#ifdef CONFIG_KEXEC		/* use no memory without kexec */
+#ifdef CONFIG_KEXEC_CORE	/* use no memory without kexec */
 	lwz	r4,0(r5)
 	cmpwi	0,r4,0
 	beq	99b
@@ -503,7 +503,7 @@ kexec_flag:
 	.long	0
 
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 #ifdef CONFIG_PPC_BOOK3E
 /*
  * BOOK3E has no real MMU mode, so we have to setup the initial TLB
@@ -716,4 +716,4 @@ _GLOBAL(kexec_sequence)
 	mtlr	4
 	li	r5,0
 	blr	/* image->start(physid, image->start, 0); */
-#endif /* CONFIG_KEXEC */
+#endif /* CONFIG_KEXEC_CORE */
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index a7b87b6b4ef4..f5d399e46193 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -428,7 +428,7 @@ static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
 		tce_alloc_end = *lprop;
 #endif
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 	lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
 	if (lprop)
 		crashk_res.start = *lprop;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 7ac8e6eaab5b..c3e129080c31 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -346,7 +346,7 @@ void early_setup_secondary(void)
 
 #endif /* CONFIG_SMP */
 
-#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC_CORE)
 static bool use_spinloop(void)
 {
 	if (!IS_ENABLED(CONFIG_PPC_BOOK3E))
@@ -391,7 +391,7 @@ void smp_release_cpus(void)
 
 	DBG(" <- smp_release_cpus()\n");
 }
-#endif /* CONFIG_SMP || CONFIG_KEXEC */
+#endif /* CONFIG_SMP || CONFIG_KEXEC_CORE */
 
 /*
  * Initialize some remaining members of the ppc64_caches and systemcfg
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 9c6f3fd58059..893bd7f79be6 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -193,7 +193,7 @@ int smp_request_message_ipi(int virq, int msg)
 	if (msg < 0 || msg > PPC_MSG_DEBUGGER_BREAK) {
 		return -EINVAL;
 	}
-#if !defined(CONFIG_DEBUGGER) && !defined(CONFIG_KEXEC)
+#if !defined(CONFIG_DEBUGGER) && !defined(CONFIG_KEXEC_CORE)
 	if (msg == PPC_MSG_DEBUGGER_BREAK) {
 		return 1;
 	}
@@ -325,7 +325,7 @@ void tick_broadcast(const struct cpumask *mask)
 }
 #endif
 
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC_CORE)
 void smp_send_debugger_break(void)
 {
 	int cpu;
@@ -340,7 +340,7 @@ void smp_send_debugger_break(void)
 }
 #endif
 
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC_CORE
 void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
 {
 	crash_ipi_function_ptr = crash_ipi_callback;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index b922c6f4a2fe..5faaed2f2144 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -66,7 +66,7 @@
 #include <sysdev/fsl_pci.h>
 #include <asm/kprobes.h>
 
-#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC_CORE)
 int (*__debugger)(struct pt_regs *regs) __read_mostly;
 int (*__debugger_ipi)(struct pt_regs *regs) __read_mostly;
 int (*__debugger_bpt)(struct pt_regs *regs) __read_mostly;