powerpc: Merge arch/ppc64/mm to arch/powerpc/mm

This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm,
and arranges that we use them when compiling with ARCH=ppc64.

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 151 insertions, 0 deletions

diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
new file mode 100644
index 000000000000..a3a03da503bc
--- /dev/null
+++ b/arch/powerpc/mm/slb_low.S
@@ -0,0 +1,151 @@
+/*
+ * arch/ppc64/mm/slb_low.S
+ *
+ * Low-level SLB routines
+ *
+ * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM
+ *
+ * Based on earlier C version:
+ * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com
+ *    Copyright (c) 2001 Dave Engebretsen
+ * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+
+/* void slb_allocate(unsigned long ea);
+ *
+ * Create an SLB entry for the given EA (user or kernel).
+ * 	r3 = faulting address, r13 = PACA
+ *	r9, r10, r11 are clobbered by this function
+ * No other registers are examined or changed.
+ */
+_GLOBAL(slb_allocate)
+	/*
+	 * First find a slot, round robin. Previously we tried to find
+	 * a free slot first but that took too long. Unfortunately we
+	 * dont have any LRU information to help us choose a slot.
+	 */
+#ifdef CONFIG_PPC_ISERIES
+	/*
+	 * On iSeries, the "bolted" stack segment can be cast out on
+	 * shared processor switch so we need to check for a miss on
+	 * it and restore it to the right slot.
+	 */
+	ld	r9,PACAKSAVE(r13)
+	clrrdi	r9,r9,28
+	clrrdi	r11,r3,28
+	li	r10,SLB_NUM_BOLTED-1	/* Stack goes in last bolted slot */
+	cmpld	r9,r11
+	beq	3f
+#endif /* CONFIG_PPC_ISERIES */
+
+	ld	r10,PACASTABRR(r13)
+	addi	r10,r10,1
+	/* use a cpu feature mask if we ever change our slb size */
+	cmpldi	r10,SLB_NUM_ENTRIES
+
+	blt+	4f
+	li	r10,SLB_NUM_BOLTED
+
+4:
+	std	r10,PACASTABRR(r13)
+3:
+	/* r3 = faulting address, r10 = entry */
+
+	srdi	r9,r3,60		/* get region */
+	srdi	r3,r3,28		/* get esid */
+	cmpldi	cr7,r9,0xc		/* cmp KERNELBASE for later use */
+
+	rldimi	r10,r3,28,0		/* r10= ESID<<28 | entry */
+	oris	r10,r10,SLB_ESID_V@h	/* r10 |= SLB_ESID_V */
+
+	/* r3 = esid, r10 = esid_data, cr7 = <>KERNELBASE */
+
+	blt	cr7,0f			/* user or kernel? */
+
+	/* kernel address: proto-VSID = ESID */
+	/* WARNING - MAGIC: we don't use the VSID 0xfffffffff, but
+	 * this code will generate the protoVSID 0xfffffffff for the
+	 * top segment.  That's ok, the scramble below will translate
+	 * it to VSID 0, which is reserved as a bad VSID - one which
+	 * will never have any pages in it.  */
+	li	r11,SLB_VSID_KERNEL
+BEGIN_FTR_SECTION
+	bne	cr7,9f
+	li	r11,(SLB_VSID_KERNEL|SLB_VSID_L)
+END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
+	b	9f
+
+0:	/* user address: proto-VSID = context<<15 | ESID */
+	srdi.	r9,r3,USER_ESID_BITS
+	bne-	8f			/* invalid ea bits set */
+
+#ifdef CONFIG_HUGETLB_PAGE
+BEGIN_FTR_SECTION
+	lhz	r9,PACAHIGHHTLBAREAS(r13)
+	srdi	r11,r3,(HTLB_AREA_SHIFT-SID_SHIFT)
+	srd	r9,r9,r11
+	lhz	r11,PACALOWHTLBAREAS(r13)
+	srd	r11,r11,r3
+	or	r9,r9,r11
+END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	li	r11,SLB_VSID_USER
+
+#ifdef CONFIG_HUGETLB_PAGE
+BEGIN_FTR_SECTION
+	rldimi	r11,r9,8,55		/* shift masked bit into SLB_VSID_L */
+END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE)
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	ld	r9,PACACONTEXTID(r13)
+	rldimi	r3,r9,USER_ESID_BITS,0
+
+9:	/* r3 = protovsid, r11 = flags, r10 = esid_data, cr7 = <>KERNELBASE */
+	ASM_VSID_SCRAMBLE(r3,r9)
+
+	rldimi	r11,r3,SLB_VSID_SHIFT,16	/* combine VSID and flags */
+
+	/*
+	 * No need for an isync before or after this slbmte. The exception
+	 * we enter with and the rfid we exit with are context synchronizing.
+	 */
+	slbmte	r11,r10
+
+	bgelr	cr7			/* we're done for kernel addresses */
+
+	/* Update the slb cache */
+	lhz	r3,PACASLBCACHEPTR(r13)	/* offset = paca->slb_cache_ptr */
+	cmpldi	r3,SLB_CACHE_ENTRIES
+	bge	1f
+
+	/* still room in the slb cache */
+	sldi	r11,r3,1		/* r11 = offset * sizeof(u16) */
+	rldicl	r10,r10,36,28		/* get low 16 bits of the ESID */
+	add	r11,r11,r13		/* r11 = (u16 *)paca + offset */
+	sth	r10,PACASLBCACHE(r11)	/* paca->slb_cache[offset] = esid */
+	addi	r3,r3,1			/* offset++ */
+	b	2f
+1:					/* offset >= SLB_CACHE_ENTRIES */
+	li	r3,SLB_CACHE_ENTRIES+1
+2:
+	sth	r3,PACASLBCACHEPTR(r13)	/* paca->slb_cache_ptr = offset */
+	blr
+
+8:	/* invalid EA */
+	li	r3,0			/* BAD_VSID */
+	li	r11,SLB_VSID_USER	/* flags don't much matter */
+	b	9b