Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here's the powerpc batch for this merge window.  Some of the
  highlights are:

   - A bunch of endian fixes ! We don't have full LE support yet in that
     release but this contains a lot of fixes all over arch/powerpc to
     use the proper accessors, call the firmware with the right endian
     mode, etc...

   - A few updates to our "powernv" platform (non-virtualized, the one
     to run KVM on), among other, support for bridging the P8 LPC bus
     for UARTs, support and some EEH fixes.

   - Some mpc51xx clock API cleanups in preparation for a clock API
     overhaul

   - A pile of cleanups of our old math emulation code, including better
     support for using it to emulate optional FP instructions on
     embedded chips that otherwise have a HW FPU.

   - Some infrastructure in selftest, for powerpc now, but could be
     generalized, initially used by some tests for our perf instruction
     counting code.

   - A pile of fixes for hotplug on pseries (that was seriously
     bitrotting)

   - The usual slew of freescale embedded updates, new boards, 64-bit
     hiberation support, e6500 core PMU support, etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc: Correct FSCR bit definitions
  powerpc/xmon: Fix printing of set of CPUs in xmon
  powerpc/pseries: Move lparcfg.c to platforms/pseries
  powerpc/powernv: Return secondary CPUs to firmware on kexec
  powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32
  powerpc: Cleanup handling of the DSCR bit in the FSCR register
  powerpc/pseries: Child nodes are not detached by dlpar_detach_node
  powerpc/pseries: Add mising of_node_put in delete_dt_node
  powerpc/pseries: Make dlpar_configure_connector parent node aware
  powerpc/pseries: Do all node initialization in dlpar_parse_cc_node
  powerpc/pseries: Fix parsing of initial node path in update_dt_node
  powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header
  powerpc/pseries: Fix over writing of rtas return code in update_dt_node
  powerpc/pseries: Fix creation of loop in device node property list
  powerpc: Skip emulating & leave interrupts off for kernel program checks
  powerpc: Add more exception trampolines for hypervisor exceptions
  powerpc: Fix location and rename exception trampolines
  powerpc: Add more trap names to xmon
  powerpc/pseries: Add a warning in the case of cross-cpu VPA registration
  powerpc: Update the 00-Index in Documentation/powerpc
  ...

4 files changed, 153 insertions, 2 deletions

diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
index 510fae10513d..60d71eea919c 100644
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -9,7 +9,7 @@ obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
 obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
-obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
 
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 obj-$(CONFIG_PPC32)		+= $(obj32-y)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index eeae308cf982..29b89e863d7c 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -24,7 +24,7 @@
 #define BHRB_MAX_ENTRIES	32
 #define BHRB_TARGET		0x0000000000000002
 #define BHRB_PREDICTION		0x0000000000000001
-#define BHRB_EA			0xFFFFFFFFFFFFFFFC
+#define BHRB_EA			0xFFFFFFFFFFFFFFFCUL
 
 struct cpu_hw_events {
 	int n_events;
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 106c53354675..d35ae52c69dc 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
 	case 3:
 		val = mfpmr(PMRN_PMC3);
 		break;
+	case 4:
+		val = mfpmr(PMRN_PMC4);
+		break;
+	case 5:
+		val = mfpmr(PMRN_PMC5);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
 		val = 0;
@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMC3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMC4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMC5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
 	}
@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMLCA3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMLCA4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMLCA5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
 	}
@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMLCB3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMLCB4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMLCB5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
 	}
@@ -462,6 +486,12 @@ static int fsl_emb_pmu_event_init(struct perf_event *event)
 	int num_restricted;
 	int i;
 
+	if (ppmu->n_counter > MAX_HWEVENTS) {
+		WARN(1, "No. of perf counters (%d) is higher than max array size(%d)\n",
+			ppmu->n_counter, MAX_HWEVENTS);
+		ppmu->n_counter = MAX_HWEVENTS;
+	}
+
 	switch (event->attr.type) {
 	case PERF_TYPE_HARDWARE:
 		ev = event->attr.config;
diff --git a/arch/powerpc/perf/e6500-pmu.c b/arch/powerpc/perf/e6500-pmu.c
new file mode 100644
index 000000000000..3d877aa777b5
--- /dev/null
+++ b/arch/powerpc/perf/e6500-pmu.c
@@ -0,0 +1,121 @@
+/*
+ * Performance counter support for e6500 family processors.
+ *
+ * Author: Priyanka Jain, Priyanka.Jain@freescale.com
+ * Based on e500-pmu.c
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e6500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 221,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e6500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	27,		222	},
+		[C(OP_WRITE)] = {	28,		223	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	2,		254	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	37,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	12,		15	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(NODE)] = {
+				/* RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	-1,		-1	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 512;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e6500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	if (event_low >= num_events ||
+		(event_id & (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)))
+		return 0;
+
+	return FSL_EMB_EVENT_VALID;
+}
+
+static struct fsl_emb_pmu e6500_pmu = {
+	.name			= "e6500 family",
+	.n_counter		= 6,
+	.n_restricted		= 0,
+	.xlate_event		= e6500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e6500_generic_events),
+	.generic_events		= e6500_generic_events,
+	.cache_events		= &e6500_cache_events,
+};
+
+static int init_e6500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+		strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e6500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e6500_pmu);
+}
+
+early_initcall(init_e6500_pmu);