diff options
| author | Timur Tabi <timur@freescale.com> | 2012-07-26 17:08:54 +0200 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2012-09-12 21:57:07 +0200 |
| commit | 4c30c143f02f1ab8d9740c61db1ce335a5f95095 (patch) | |
| tree | 3ff0fd5e848e03e89436411e776cde6c404e1602 /arch/powerpc/platforms/85xx/Kconfig | |
| parent | powerpc/85xx: add Freescale P5040 SOC and SEC v5.2 device trees (diff) | |
| download | linux-4c30c143f02f1ab8d9740c61db1ce335a5f95095.tar.xz linux-4c30c143f02f1ab8d9740c61db1ce335a5f95095.zip | |
powerpc/85xx: Add support for P5040DS board
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which
is similar to the P5020DS. Features of the P5040 are listed below, but
not all of these features (e.g. DPAA networking) are currently supported.
Four P5040 single-threaded e5500 cores built
Up to 2.4 GHz with 64-bit ISA support
Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
support Up to 1600MT/s
Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
Packet parsing, classification, and distribution (FMAN)
Queue management for scheduling, packet sequencing and
congestion management (QMAN)
Hardware buffer management for buffer allocation and
de-allocation (BMAN)
Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes
20 lanes at up to 5 Gbps
Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
Two 10 Gbps Ethernet MACs
Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
Two serial ATA (SATA 2.0) controllers
Two high-speed USB 2.0 controllers with integrated PHY
Enhanced secure digital host controller (SD/MMC/eMMC)
Enhanced serial peripheral interface (eSPI)
Two I2C controllers
Four UARTs
Integrated flash controller supporting NAND and NOR flash
DMA
Dual four channel
Support for hardware virtualization and partitioning enforcement
Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
Secure boot, secure debug, tamper detection, volatile key storage
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/platforms/85xx/Kconfig')
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 159c01e91463..31f0618ec677 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -254,6 +254,20 @@ config P5020_DS help This option enables support for the P5020 DS board +config P5040_DS + bool "Freescale P5040 DS" + select DEFAULT_UIMAGE + select E500 + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select ARCH_REQUIRE_GPIOLIB + select GPIO_MPC8XXX + select HAS_RAPIDIO + select PPC_EPAPR_HV_PIC + help + This option enables support for the P5040 DS board + config PPC_QEMU_E500 bool "QEMU generic e500 platform" depends on EXPERIMENTAL |