Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

7 files changed, 126 insertions, 27 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 12f5932dadc9..45023e26aea3 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -171,17 +171,18 @@ config SBC8560
 	help
 	  This option enables support for the Wind River SBC8560 board
 
-config P2040_RDB
-	bool "Freescale P2040 RDB"
+config P2041_RDB
+	bool "Freescale P2041 RDB"
 	select DEFAULT_UIMAGE
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
-	  This option enables support for the P2040 RDB board
+	  This option enables support for the P2041 RDB board
 
 config P3041_DS
 	bool "Freescale P3041 DS"
@@ -189,19 +190,33 @@ config P3041_DS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
 	  This option enables support for the P3041 DS board
 
+config P3060_QDS
+	bool "Freescale P3060 QDS"
+	select DEFAULT_UIMAGE
+	select PPC_E500MC
+	select PHYS_64BIT
+	select SWIOTLB
+	select MPC8xxx_GPIO
+	select HAS_RAPIDIO
+	select PPC_EPAPR_HV_PIC
+	help
+	  This option enables support for the P3060 QDS board
+
 config P4080_DS
 	bool "Freescale P4080 DS"
 	select DEFAULT_UIMAGE
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
@@ -216,7 +231,8 @@ config P5020_DS
 	select PPC_E500MC
 	select PHYS_64BIT
 	select SWIOTLB
-	select MPC8xxx_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_MPC8XXX
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index a971b32c5c0a..bc5acb95917a 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -13,8 +13,9 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
-obj-$(CONFIG_P2040_RDB)   += p2040_rdb.o corenet_ds.o
+obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
 obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
+obj-$(CONFIG_P3060_QDS)   += p3060_qds.o corenet_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index c01c7277888c..fda15716fada 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -129,17 +129,20 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
  */
 static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 {
-	struct device_node *pixis_node;
+	struct device_node *np;
 	void __iomem *pixis;
 	u8 __iomem *brdcfg1;
 
-	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
-	if (!pixis_node) {
+	np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+	if (!np)
+		/* older device trees used "fsl,p1022ds-pixis" */
+		np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
+	if (!np) {
 		pr_err("p1022ds: missing ngPIXIS node\n");
 		return;
 	}
 
-	pixis = of_iomap(pixis_node, 0);
+	pixis = of_iomap(np, 0);
 	if (!pixis) {
 		pr_err("p1022ds: could not map ngPIXIS registers\n");
 		return;
diff --git a/arch/powerpc/platforms/85xx/p2040_rdb.c b/arch/powerpc/platforms/85xx/p2041_rdb.c
index 32b56ac73dfb..eda6ed5683e1 100644
--- a/arch/powerpc/platforms/85xx/p2040_rdb.c
+++ b/arch/powerpc/platforms/85xx/p2041_rdb.c
@@ -1,5 +1,5 @@
 /*
- * P2040 RDB Setup
+ * P2041 RDB Setup
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,18 +35,18 @@
 /*
  * Called very early, device-tree isn't unflattened
  */
-static int __init p2040_rdb_probe(void)
+static int __init p2041_rdb_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 #ifdef CONFIG_SMP
 	extern struct smp_ops_t smp_85xx_ops;
 #endif
 
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB"))
+	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB"))
 		return 1;
 
 	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P2040RDB-hv")) {
+	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) {
 		ppc_md.init_IRQ = ehv_pic_init;
 		ppc_md.get_irq = ehv_pic_get_irq;
 		ppc_md.restart = fsl_hv_restart;
@@ -66,9 +66,9 @@ static int __init p2040_rdb_probe(void)
 	return 0;
 }
 
-define_machine(p2040_rdb) {
-	.name			= "P2040 RDB",
-	.probe			= p2040_rdb_probe,
+define_machine(p2041_rdb) {
+	.name			= "P2041 RDB",
+	.probe			= p2041_rdb_probe,
 	.setup_arch		= corenet_ds_setup_arch,
 	.init_IRQ		= corenet_ds_pic_init,
 #ifdef CONFIG_PCI
@@ -81,8 +81,8 @@ define_machine(p2040_rdb) {
 	.power_save		= e500_idle,
 };
 
-machine_device_initcall(p2040_rdb, corenet_ds_publish_devices);
+machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
 
 #ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2040_rdb, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
 #endif
diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c
new file mode 100644
index 000000000000..01dcf44871e9
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p3060_qds.c
@@ -0,0 +1,77 @@
+/*
+ * P3060 QDS Setup
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include <asm/ehv_pic.h>
+#include "corenet_ds.h"
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p3060_qds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		 */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(p3060_qds) {
+	.name			= "P3060 QDS",
+	.probe			= p3060_qds_probe,
+	.setup_arch		= corenet_ds_setup_arch,
+	.init_IRQ		= corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_coreint_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+	.power_save		= e500_idle,
+};
+
+machine_device_initcall(p3060_qds, declare_of_platform_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
+#endif
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 09ced7221750..cebd786dc334 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -283,7 +283,7 @@ static int __init sbc8560_bdrstcr_init(void)
 
 	of_address_to_resource(np, 0, &res);
 
-	printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+	printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
 
 	brstcr = ioremap(res.start, resource_size(&res));
 	if(!brstcr)
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 5b9b901f6443..2df4785ffd4e 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -48,10 +48,11 @@ smp_85xx_kick_cpu(int nr)
 	const u64 *cpu_rel_addr;
 	__iomem u32 *bptr_vaddr;
 	struct device_node *np;
-	int n = 0;
+	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
 
-	WARN_ON (nr < 0 || nr >= NR_CPUS);
+	WARN_ON(nr < 0 || nr >= NR_CPUS);
+	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
 
 	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
 
@@ -79,7 +80,7 @@ smp_85xx_kick_cpu(int nr)
 
 	local_irq_save(flags);
 
-	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
+	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
 #ifdef CONFIG_PPC32
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
@@ -88,7 +89,7 @@ smp_85xx_kick_cpu(int nr)
 				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
 
 	/* Wait a bit for the CPU to ack. */
-	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
+	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
 		mdelay(1);
 #else
 	smp_generic_kick_cpu(nr);
@@ -206,7 +207,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 	if ( !timeout )
 		printk(KERN_ERR "Unable to bring down secondary cpu(s)");
 
-	for (i = 0; i < num_cpus; i++)
+	for_each_online_cpu(i)
 	{
 		if ( i == smp_processor_id() ) continue;
 		mpic_reset_core(i);
@@ -243,6 +244,7 @@ void __init mpc85xx_smp_init(void)
 		 * If left NULL, .message_pass defaults to
 		 * smp_muxed_ipi_message_pass
 		 */
+		smp_85xx_ops.message_pass = NULL;
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
 	}