diff options
author | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2009-12-09 07:10:22 +0100 |
---|---|---|
committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2009-12-09 07:10:22 +0100 |
commit | 8c82da5e2495589b7b70a43789e7cbd61a486ed0 (patch) | |
tree | fdde7380d2584d0297898373831f26cd5208cabd /arch/powerpc/platforms | |
parent | powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallo... (diff) | |
parent | mpc52xx/wdt: remove obsolete old WDT implementation (diff) | |
download | linux-8c82da5e2495589b7b70a43789e7cbd61a486ed0.tar.xz linux-8c82da5e2495589b7b70a43789e7cbd61a486ed0.zip |
Merge commit 'gcl/next' into next
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r-- | arch/powerpc/platforms/52xx/Kconfig | 5 | ||||
-rw-r--r-- | arch/powerpc/platforms/52xx/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 428 | ||||
-rw-r--r-- | arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c | 560 |
4 files changed, 981 insertions, 13 deletions
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 8b8e9560a315..47ea1be1481b 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -62,3 +62,8 @@ config PPC_MPC5200_GPIO select GENERIC_GPIO help Enable gpiolib support for mpc5200 based boards + +config PPC_MPC5200_LPBFIFO + tristate "MPC5200 LocalPlus bus FIFO driver" + depends on PPC_MPC52xx + select PPC_BESTCOMM_GEN_BD diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index bfd4f52cf3dd..2bc8cd0c5cfc 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -15,3 +15,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) endif obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o +obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 4d76b7f2336c..17ecdf4c87ae 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -16,8 +16,14 @@ * output signals or measure input signals. * * This driver supports the GPIO and IRQ controller functions of the GPT - * device. Timer functions are not yet supported, nor is the watchdog - * timer. + * device. Timer functions are not yet supported. + * + * The timer gpt0 can be used as watchdog (wdt). If the wdt mode is used, + * this prevents the use of any gpt0 gpt function (i.e. they will fail with + * -EBUSY). Thus, the safety wdt function always has precedence over the gpt + * function. If the kernel has been compiled with CONFIG_WATCHDOG_NOWAYOUT, + * this means that gpt0 is locked in wdt mode until the next reboot - this + * may be a requirement in safety applications. * * To use the GPIO function, the following two properties must be added * to the device tree node for the gpt device (typically in the .dts file @@ -46,17 +52,24 @@ * the output mode. This driver does not change the output mode setting. */ +#include <linux/device.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/list.h> +#include <linux/mutex.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> #include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/miscdevice.h> +#include <linux/uaccess.h> +#include <asm/div64.h> #include <asm/mpc52xx.h> MODULE_DESCRIPTION("Freescale MPC52xx gpt driver"); -MODULE_AUTHOR("Sascha Hauer, Grant Likely"); +MODULE_AUTHOR("Sascha Hauer, Grant Likely, Albrecht Dreß"); MODULE_LICENSE("GPL"); /** @@ -66,18 +79,27 @@ MODULE_LICENSE("GPL"); * @lock: spinlock to coordinate between different functions. * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported + * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates + * if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates + * if the timer is actively used as wdt which blocks gpt functions */ struct mpc52xx_gpt_priv { + struct list_head list; /* List of all GPT devices */ struct device *dev; struct mpc52xx_gpt __iomem *regs; spinlock_t lock; struct irq_host *irqhost; + u32 ipb_freq; + u8 wdt_mode; #if defined(CONFIG_GPIOLIB) struct of_gpio_chip of_gc; #endif }; +LIST_HEAD(mpc52xx_gpt_list); +DEFINE_MUTEX(mpc52xx_gpt_list_mutex); + #define MPC52xx_GPT_MODE_MS_MASK (0x07) #define MPC52xx_GPT_MODE_MS_IC (0x01) #define MPC52xx_GPT_MODE_MS_OC (0x02) @@ -88,15 +110,25 @@ struct mpc52xx_gpt_priv { #define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20) #define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30) +#define MPC52xx_GPT_MODE_COUNTER_ENABLE (0x1000) +#define MPC52xx_GPT_MODE_CONTINUOUS (0x0400) +#define MPC52xx_GPT_MODE_OPEN_DRAIN (0x0200) #define MPC52xx_GPT_MODE_IRQ_EN (0x0100) +#define MPC52xx_GPT_MODE_WDT_EN (0x8000) #define MPC52xx_GPT_MODE_ICT_MASK (0x030000) #define MPC52xx_GPT_MODE_ICT_RISING (0x010000) #define MPC52xx_GPT_MODE_ICT_FALLING (0x020000) #define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000) +#define MPC52xx_GPT_MODE_WDT_PING (0xa5) + #define MPC52xx_GPT_STATUS_IRQMASK (0x000f) +#define MPC52xx_GPT_CAN_WDT (1 << 0) +#define MPC52xx_GPT_IS_WDT (1 << 1) + + /* --------------------------------------------------------------------- * Cascaded interrupt controller hooks */ @@ -190,7 +222,7 @@ static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct, dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]); - if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) { + if ((intsize < 1) || (intspec[0] > 3)) { dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name); return -EINVAL; } @@ -211,13 +243,11 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) { int cascade_virq; unsigned long flags; - - /* Only setup cascaded IRQ if device tree claims the GPT is - * an interrupt controller */ - if (!of_find_property(node, "interrupt-controller", NULL)) - return; + u32 mode; cascade_virq = irq_of_parse_and_map(node, 0); + if (!cascade_virq) + return; gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1, &mpc52xx_gpt_irq_ops, -1); @@ -227,14 +257,16 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) } gpt->irqhost->host_data = gpt; - set_irq_data(cascade_virq, gpt); set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade); - /* Set to Input Capture mode */ + /* If the GPT is currently disabled, then change it to be in Input + * Capture mode. If the mode is non-zero, then the pin could be + * already in use for something. */ spin_lock_irqsave(&gpt->lock, flags); - clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK, - MPC52xx_GPT_MODE_MS_IC); + mode = in_be32(&gpt->regs->mode); + if ((mode & MPC52xx_GPT_MODE_MS_MASK) == 0) + out_be32(&gpt->regs->mode, mode | MPC52xx_GPT_MODE_MS_IC); spin_unlock_irqrestore(&gpt->lock, flags); dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq); @@ -335,6 +367,354 @@ static void mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { } #endif /* defined(CONFIG_GPIOLIB) */ +/*********************************************************************** + * Timer API + */ + +/** + * mpc52xx_gpt_from_irq - Return the GPT device associated with an IRQ number + * @irq: irq of timer. + */ +struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq) +{ + struct mpc52xx_gpt_priv *gpt; + struct list_head *pos; + + /* Iterate over the list of timers looking for a matching device */ + mutex_lock(&mpc52xx_gpt_list_mutex); + list_for_each(pos, &mpc52xx_gpt_list) { + gpt = container_of(pos, struct mpc52xx_gpt_priv, list); + if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) { + mutex_unlock(&mpc52xx_gpt_list_mutex); + return gpt; + } + } + mutex_unlock(&mpc52xx_gpt_list_mutex); + + return NULL; +} +EXPORT_SYMBOL(mpc52xx_gpt_from_irq); + +static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period, + int continuous, int as_wdt) +{ + u32 clear, set; + u64 clocks; + u32 prescale; + unsigned long flags; + + clear = MPC52xx_GPT_MODE_MS_MASK | MPC52xx_GPT_MODE_CONTINUOUS; + set = MPC52xx_GPT_MODE_MS_GPIO | MPC52xx_GPT_MODE_COUNTER_ENABLE; + if (as_wdt) { + clear |= MPC52xx_GPT_MODE_IRQ_EN; + set |= MPC52xx_GPT_MODE_WDT_EN; + } else if (continuous) + set |= MPC52xx_GPT_MODE_CONTINUOUS; + + /* Determine the number of clocks in the requested period. 64 bit + * arithmatic is done here to preserve the precision until the value + * is scaled back down into the u32 range. Period is in 'ns', bus + * frequency is in Hz. */ + clocks = period * (u64)gpt->ipb_freq; + do_div(clocks, 1000000000); /* Scale it down to ns range */ + + /* This device cannot handle a clock count greater than 32 bits */ + if (clocks > 0xffffffff) + return -EINVAL; + + /* Calculate the prescaler and count values from the clocks value. + * 'clocks' is the number of clock ticks in the period. The timer + * has 16 bit precision and a 16 bit prescaler. Prescaler is + * calculated by integer dividing the clocks by 0x10000 (shifting + * down 16 bits) to obtain the smallest possible divisor for clocks + * to get a 16 bit count value. + * + * Note: the prescale register is '1' based, not '0' based. ie. a + * value of '1' means divide the clock by one. 0xffff divides the + * clock by 0xffff. '0x0000' does not divide by zero, but wraps + * around and divides by 0x10000. That is why prescale must be + * a u32 variable, not a u16, for this calculation. */ + prescale = (clocks >> 16) + 1; + do_div(clocks, prescale); + if (clocks > 0xffff) { + pr_err("calculation error; prescale:%x clocks:%llx\n", + prescale, clocks); + return -EINVAL; + } + + /* Set and enable the timer, reject an attempt to use a wdt as gpt */ + spin_lock_irqsave(&gpt->lock, flags); + if (as_wdt) + gpt->wdt_mode |= MPC52xx_GPT_IS_WDT; + else if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) { + spin_unlock_irqrestore(&gpt->lock, flags); + return -EBUSY; + } + out_be32(&gpt->regs->count, prescale << 16 | clocks); + clrsetbits_be32(&gpt->regs->mode, clear, set); + spin_unlock_irqrestore(&gpt->lock, flags); + + return 0; +} + +/** + * mpc52xx_gpt_start_timer - Set and enable the GPT timer + * @gpt: Pointer to gpt private data structure + * @period: period of timer in ns; max. ~130s @ 33MHz IPB clock + * @continuous: set to 1 to make timer continuous free running + * + * An interrupt will be generated every time the timer fires + */ +int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period, + int continuous) +{ + return mpc52xx_gpt_do_start(gpt, period, continuous, 0); +} +EXPORT_SYMBOL(mpc52xx_gpt_start_timer); + +/** + * mpc52xx_gpt_stop_timer - Stop a gpt + * @gpt: Pointer to gpt private data structure + * + * Returns an error if attempting to stop a wdt + */ +int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt) +{ + unsigned long flags; + + /* reject the operation if the timer is used as watchdog (gpt 0 only) */ + spin_lock_irqsave(&gpt->lock, flags); + if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) { + spin_unlock_irqrestore(&gpt->lock, flags); + return -EBUSY; + } + + clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE); + spin_unlock_irqrestore(&gpt->lock, flags); + return 0; +} +EXPORT_SYMBOL(mpc52xx_gpt_stop_timer); + +/** + * mpc52xx_gpt_timer_period - Read the timer period + * @gpt: Pointer to gpt private data structure + * + * Returns the timer period in ns + */ +u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt) +{ + u64 period; + u64 prescale; + unsigned long flags; + + spin_lock_irqsave(&gpt->lock, flags); + period = in_be32(&gpt->regs->count); + spin_unlock_irqrestore(&gpt->lock, flags); + + prescale = period >> 16; + period &= 0xffff; + if (prescale == 0) + prescale = 0x10000; + period = period * prescale * 1000000000ULL; + do_div(period, (u64)gpt->ipb_freq); + return period; +} +EXPORT_SYMBOL(mpc52xx_gpt_timer_period); + +#if defined(CONFIG_MPC5200_WDT) +/*********************************************************************** + * Watchdog API for gpt0 + */ + +#define WDT_IDENTITY "mpc52xx watchdog on GPT0" + +/* wdt_is_active stores wether or not the /dev/watchdog device is opened */ +static unsigned long wdt_is_active; + +/* wdt-capable gpt */ +static struct mpc52xx_gpt_priv *mpc52xx_gpt_wdt; + +/* low-level wdt functions */ +static inline void mpc52xx_gpt_wdt_ping(struct mpc52xx_gpt_priv *gpt_wdt) +{ + unsigned long flags; + + spin_lock_irqsave(&gpt_wdt->lock, flags); + out_8((u8 *) &gpt_wdt->regs->mode, MPC52xx_GPT_MODE_WDT_PING); + spin_unlock_irqrestore(&gpt_wdt->lock, flags); +} + +/* wdt misc device api */ +static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + struct mpc52xx_gpt_priv *gpt_wdt = file->private_data; + mpc52xx_gpt_wdt_ping(gpt_wdt); + return 0; +} + +static struct watchdog_info mpc5200_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = WDT_IDENTITY, +}; + +static long mpc52xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct mpc52xx_gpt_priv *gpt_wdt = file->private_data; + int __user *data = (int __user *)arg; + int timeout; + u64 real_timeout; + int ret = 0; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user(data, &mpc5200_wdt_info, + sizeof(mpc5200_wdt_info)); + if (ret) + ret = -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, data); + break; + + case WDIOC_KEEPALIVE: + mpc52xx_gpt_wdt_ping(gpt_wdt); + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(timeout, data); + if (ret) + break; + real_timeout = (u64) timeout * 1000000000ULL; + ret = mpc52xx_gpt_do_start(gpt_wdt, real_timeout, 0, 1); + if (ret) + break; + /* fall through and return the timeout */ + + case WDIOC_GETTIMEOUT: + /* we need to round here as to avoid e.g. the following + * situation: + * - timeout requested is 1 second; + * - real timeout @33MHz is 999997090ns + * - the int divide by 10^9 will return 0. + */ + real_timeout = + mpc52xx_gpt_timer_period(gpt_wdt) + 500000000ULL; + do_div(real_timeout, 1000000000ULL); + timeout = (int) real_timeout; + ret = put_user(timeout, data); + break; + + default: + ret = -ENOTTY; + } + return ret; +} + +static int mpc52xx_wdt_open(struct inode *inode, struct file *file) +{ + int ret; + + /* sanity check */ + if (!mpc52xx_gpt_wdt) + return -ENODEV; + + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &wdt_is_active)) + return -EBUSY; + + /* Set and activate the watchdog with 30 seconds timeout */ + ret = mpc52xx_gpt_do_start(mpc52xx_gpt_wdt, 30ULL * 1000000000ULL, + 0, 1); + if (ret) { + clear_bit(0, &wdt_is_active); + return ret; + } + + file->private_data = mpc52xx_gpt_wdt; + return nonseekable_open(inode, file); +} + +static int mpc52xx_wdt_release(struct inode *inode, struct file *file) +{ + /* note: releasing the wdt in NOWAYOUT-mode does not stop it */ +#if !defined(CONFIG_WATCHDOG_NOWAYOUT) + struct mpc52xx_gpt_priv *gpt_wdt = file->private_data; + unsigned long flags; + + spin_lock_irqsave(&gpt_wdt->lock, flags); + clrbits32(&gpt_wdt->regs->mode, + MPC52xx_GPT_MODE_COUNTER_ENABLE | MPC52xx_GPT_MODE_WDT_EN); + gpt_wdt->wdt_mode &= ~MPC52xx_GPT_IS_WDT; + spin_unlock_irqrestore(&gpt_wdt->lock, flags); +#endif + clear_bit(0, &wdt_is_active); + return 0; +} + + +static const struct file_operations mpc52xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = mpc52xx_wdt_write, + .unlocked_ioctl = mpc52xx_wdt_ioctl, + .open = mpc52xx_wdt_open, + .release = mpc52xx_wdt_release, +}; + +static struct miscdevice mpc52xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mpc52xx_wdt_fops, +}; + +static int __devinit mpc52xx_gpt_wdt_init(void) +{ + int err; + + /* try to register the watchdog misc device */ + err = misc_register(&mpc52xx_wdt_miscdev); + if (err) + pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY); + else + pr_info("%s: watchdog device registered\n", WDT_IDENTITY); + return err; +} + +static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, + const u32 *period) +{ + u64 real_timeout; + + /* remember the gpt for the wdt operation */ + mpc52xx_gpt_wdt = gpt; + + /* configure the wdt if the device tree contained a timeout */ + if (!period || *period == 0) + return 0; + + real_timeout = (u64) *period * 1000000000ULL; + if (mpc52xx_gpt_do_start(gpt, real_timeout, 0, 1)) + dev_warn(gpt->dev, "starting as wdt failed\n"); + else + dev_info(gpt->dev, "watchdog set to %us timeout\n", *period); + return 0; +} + +#else + +static int __devinit mpc52xx_gpt_wdt_init(void) +{ + return 0; +} + +#define mpc52xx_gpt_wdt_setup(x, y) (0) + +#endif /* CONFIG_MPC5200_WDT */ + /* --------------------------------------------------------------------- * of_platform bus binding code */ @@ -349,6 +729,7 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, spin_lock_init(&gpt->lock); gpt->dev = &ofdev->dev; + gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node); gpt->regs = of_iomap(ofdev->node, 0); if (!gpt->regs) { kfree(gpt); @@ -360,6 +741,26 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, mpc52xx_gpt_gpio_setup(gpt, ofdev->node); mpc52xx_gpt_irq_setup(gpt, ofdev->node); + mutex_lock(&mpc52xx_gpt_list_mutex); + list_add(&gpt->list, &mpc52xx_gpt_list); + mutex_unlock(&mpc52xx_gpt_list_mutex); + + /* check if this device could be a watchdog */ + if (of_get_property(ofdev->node, "fsl,has-wdt", NULL) || + of_get_property(ofdev->node, "has-wdt", NULL)) { + const u32 *on_boot_wdt; + + gpt->wdt_mode = MPC52xx_GPT_CAN_WDT; + on_boot_wdt = of_get_property(ofdev->node, "fsl,wdt-on-boot", + NULL); + if (on_boot_wdt) { + dev_info(gpt->dev, "used as watchdog\n"); + gpt->wdt_mode |= MPC52xx_GPT_IS_WDT; + } else + dev_info(gpt->dev, "can function as watchdog\n"); + mpc52xx_gpt_wdt_setup(gpt, on_boot_wdt); + } + return 0; } @@ -394,3 +795,4 @@ static int __init mpc52xx_gpt_init(void) /* Make sure GPIOs and IRQs get set up before anyone tries to use them */ subsys_initcall(mpc52xx_gpt_init); +device_initcall(mpc52xx_gpt_wdt_init); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c new file mode 100644 index 000000000000..929d017535a3 --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -0,0 +1,560 @@ +/* + * LocalPlus Bus FIFO driver for the Freescale MPC52xx. + * + * Copyright (C) 2009 Secret Lab Technologies Ltd. + * + * This file is released under the GPLv2 + * + * Todo: + * - Add support for multiple requests to be queued. + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/mpc52xx.h> +#include <asm/time.h> + +#include <sysdev/bestcomm/bestcomm.h> +#include <sysdev/bestcomm/bestcomm_priv.h> +#include <sysdev/bestcomm/gen_bd.h> + +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); +MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver"); +MODULE_LICENSE("GPL"); + +#define LPBFIFO_REG_PACKET_SIZE (0x00) +#define LPBFIFO_REG_START_ADDRESS (0x04) +#define LPBFIFO_REG_CONTROL (0x08) +#define LPBFIFO_REG_ENABLE (0x0C) +#define LPBFIFO_REG_BYTES_DONE_STATUS (0x14) +#define LPBFIFO_REG_FIFO_DATA (0x40) +#define LPBFIFO_REG_FIFO_STATUS (0x44) +#define LPBFIFO_REG_FIFO_CONTROL (0x48) +#define LPBFIFO_REG_FIFO_ALARM (0x4C) + +struct mpc52xx_lpbfifo { + struct device *dev; + phys_addr_t regs_phys; + void __iomem *regs; + int irq; + spinlock_t lock; + + struct bcom_task *bcom_tx_task; + struct bcom_task *bcom_rx_task; + struct bcom_task *bcom_cur_task; + + /* Current state data */ + struct mpc52xx_lpbfifo_request *req; + int dma_irqs_enabled; +}; + +/* The MPC5200 has only one fifo, so only need one instance structure */ +static struct mpc52xx_lpbfifo lpbfifo; + +/** + * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered + */ +static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) +{ + size_t transfer_size = req->size - req->pos; + struct bcom_bd *bd; + void __iomem *reg; + u32 *data; + int i; + int bit_fields; + int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA); + int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE; + int poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA; + + /* Set and clear the reset bits; is good practice in User Manual */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + + /* set master enable bit */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000001); + if (!dma) { + /* While the FIFO can be setup for transfer sizes as large as + * 16M-1, the FIFO itself is only 512 bytes deep and it does + * not generate interrupts for FIFO full events (only transfer + * complete will raise an IRQ). Therefore when not using + * Bestcomm to drive the FIFO it needs to either be polled, or + * transfers need to constrained to the size of the fifo. + * + * This driver restricts the size of the transfer + */ + if (transfer_size > 512) + transfer_size = 512; + + /* Load the FIFO with data */ + if (write) { + reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA; + data = req->data + req->pos; + for (i = 0; i < transfer_size; i += 4) + out_be32(reg, *data++); + } + + /* Unmask both error and completion irqs */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000301); + } else { + /* Choose the correct direction + * + * Configure the watermarks so DMA will always complete correctly. + * It may be worth experimenting with the ALARM value to see if + * there is a performance impacit. However, if it is wrong there + * is a risk of DMA not transferring the last chunk of data + */ + if (write) { + out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1e4); + out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 7); + lpbfifo.bcom_cur_task = lpbfifo.bcom_tx_task; + } else { + out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1ff); + out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 0); + lpbfifo.bcom_cur_task = lpbfifo.bcom_rx_task; + + if (poll_dma) { + if (lpbfifo.dma_irqs_enabled) { + disable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task)); + lpbfifo.dma_irqs_enabled = 0; + } + } else { + if (!lpbfifo.dma_irqs_enabled) { + enable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task)); + lpbfifo.dma_irqs_enabled = 1; + } + } + } + + bd = bcom_prepare_next_buffer(lpbfifo.bcom_cur_task); + bd->status = transfer_size; + if (!write) { + /* + * In the DMA read case, the DMA doesn't complete, + * possibly due to incorrect watermarks in the ALARM + * and CONTROL regs. For now instead of trying to + * determine the right watermarks that will make this + * work, just increase the number of bytes the FIFO is + * expecting. + * + * When submitting another operation, the FIFO will get + * reset, so the condition of the FIFO waiting for a + * non-existent 4 bytes will get cleared. + */ + transfer_size += 4; /* BLECH! */ + } + bd->data[0] = req->data_phys + req->pos; + bcom_submit_next_buffer(lpbfifo.bcom_cur_task, NULL); + + /* error irq & master enabled bit */ + bit_fields = 0x00000201; + + /* Unmask irqs */ + if (write && (!poll_dma)) + bit_fields |= 0x00000100; /* completion irq too */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, bit_fields); + } + + /* Set transfer size, width, chip select and READ mode */ + out_be32(lpbfifo.regs + LPBFIFO_REG_START_ADDRESS, + req->offset + req->pos); + out_be32(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, transfer_size); + + bit_fields = req->cs << 24 | 0x000008; + if (!write) + bit_fields |= 0x010000; /* read mode */ + out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, bit_fields); + + /* Kick it off */ + out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01); + if (dma) + bcom_enable(lpbfifo.bcom_cur_task); +} + +/** + * mpc52xx_lpbfifo_irq - IRQ handler for LPB FIFO + * + * On transmit, the dma completion irq triggers before the fifo completion + * triggers. Handle the dma completion here instead of the LPB FIFO Bestcomm + * task completion irq becuase everyting is not really done until the LPB FIFO + * completion irq triggers. + * + * In other words: + * For DMA, on receive, the "Fat Lady" is the bestcom completion irq. on + * transmit, the fifo completion irq is the "Fat Lady". The opera (or in this + * case the DMA/FIFO operation) is not finished until the "Fat Lady" sings. + * + * Reasons for entering this routine: + * 1) PIO mode rx and tx completion irq + * 2) DMA interrupt mode tx completion irq + * 3) DMA polled mode tx + * + * Exit conditions: + * 1) Transfer aborted + * 2) FIFO complete without DMA; more data to do + * 3) FIFO complete without DMA; all data transfered + * 4) FIFO complete using DMA + * + * Condition 1 can occur regardless of whether or not DMA is used. + * It requires executing the callback to report the error and exiting + * immediately. + * + * Condition 2 requires programming the FIFO with the next block of data + * + * Condition 3 requires executing the callback to report completion + * + * Condition 4 means the same as 3, except that we also retrieve the bcom + * buffer so DMA doesn't get clogged up. + * + * To make things trickier, the spinlock must be dropped before + * executing the callback, otherwise we could end up with a deadlock + * or nested spinlock condition. The out path is non-trivial, so + * extra fiddling is done to make sure all paths lead to the same + * outbound code. + */ +static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id) +{ + struct mpc52xx_lpbfifo_request *req; + u32 status = in_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS); + void __iomem *reg; + u32 *data; + int count, i; + int do_callback = 0; + u32 ts; + unsigned long flags; + int dma, write, poll_dma; + + spin_lock_irqsave(&lpbfifo.lock, flags); + ts = get_tbl(); + + req = lpbfifo.req; + if (!req) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + pr_err("bogus LPBFIFO IRQ\n"); + return IRQ_HANDLED; + } + + dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA); + write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE; + poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA; + + if (dma && !write) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + pr_err("bogus LPBFIFO IRQ (dma and not writting)\n"); + return IRQ_HANDLED; + } + + if ((status & 0x01) == 0) { + goto out; + } + + /* check abort bit */ + if (status & 0x10) { + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + do_callback = 1; + goto out; + } + + /* Read result from hardware */ + count = in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS); + count &= 0x00ffffff; + + if (!dma && !write) { + /* copy the data out of the FIFO */ + reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA; + data = req->data + req->pos; + for (i = 0; i < count; i += 4) + *data++ = in_be32(reg); + } + + /* Update transfer position and count */ + req->pos += count; + + /* Decide what to do next */ + if (req->size - req->pos) + mpc52xx_lpbfifo_kick(req); /* more work to do */ + else + do_callback = 1; + + out: + /* Clear the IRQ */ + out_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS, 0x01); + + if (dma && (status & 0x11)) { + /* + * Count the DMA as complete only when the FIFO completion + * status or abort bits are set. + * + * (status & 0x01) should always be the case except sometimes + * when using polled DMA. + * + * (status & 0x10) {transfer aborted}: This case needs more + * testing. + */ + bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL); + } + req->last_byte = ((u8 *)req->data)[req->size - 1]; + + /* When the do_callback flag is set; it means the transfer is finished + * so set the FIFO as idle */ + if (do_callback) + lpbfifo.req = NULL; + + if (irq != 0) /* don't increment on polled case */ + req->irq_count++; + + req->irq_ticks += get_tbl() - ts; + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + /* Spinlock is released; it is now safe to call the callback */ + if (do_callback && req->callback) + req->callback(req); + + return IRQ_HANDLED; +} + +/** + * mpc52xx_lpbfifo_bcom_irq - IRQ handler for LPB FIFO Bestcomm task + * + * Only used when receiving data. + */ +static irqreturn_t mpc52xx_lpbfifo_bcom_irq(int irq, void *dev_id) +{ + struct mpc52xx_lpbfifo_request *req; + unsigned long flags; + u32 status; + u32 ts; + + spin_lock_irqsave(&lpbfifo.lock, flags); + ts = get_tbl(); + + req = lpbfifo.req; + if (!req || (req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA)) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return IRQ_HANDLED; + } + + if (irq != 0) /* don't increment on polled case */ + req->irq_count++; + + if (!bcom_buffer_done(lpbfifo.bcom_cur_task)) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + req->buffer_not_done_cnt++; + if ((req->buffer_not_done_cnt % 1000) == 0) + pr_err("transfer stalled\n"); + + return IRQ_HANDLED; + } + + bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL); + + req->last_byte = ((u8 *)req->data)[req->size - 1]; + + req->pos = status & 0x00ffffff; + + /* Mark the FIFO as idle */ + lpbfifo.req = NULL; + + /* Release the lock before calling out to the callback. */ + req->irq_ticks += get_tbl() - ts; + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + if (req->callback) + req->callback(req); + + return IRQ_HANDLED; +} + +/** + * mpc52xx_lpbfifo_bcom_poll - Poll for DMA completion + */ +void mpc52xx_lpbfifo_poll(void) +{ + struct mpc52xx_lpbfifo_request *req = lpbfifo.req; + int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA); + int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE; + + /* + * For more information, see comments on the "Fat Lady" + */ + if (dma && write) + mpc52xx_lpbfifo_irq(0, NULL); + else + mpc52xx_lpbfifo_bcom_irq(0, NULL); +} +EXPORT_SYMBOL(mpc52xx_lpbfifo_poll); + +/** + * mpc52xx_lpbfifo_submit - Submit an LPB FIFO transfer request. + * @req: Pointer to request structure + */ +int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req) +{ + unsigned long flags; + + if (!lpbfifo.regs) + return -ENODEV; + + spin_lock_irqsave(&lpbfifo.lock, flags); + + /* If the req pointer is already set, then a transfer is in progress */ + if (lpbfifo.req) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return -EBUSY; + } + + /* Setup the transfer */ + lpbfifo.req = req; + req->irq_count = 0; + req->irq_ticks = 0; + req->buffer_not_done_cnt = 0; + req->pos = 0; + + mpc52xx_lpbfifo_kick(req); + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return 0; +} +EXPORT_SYMBOL(mpc52xx_lpbfifo_submit); + +void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req) +{ + unsigned long flags; + + spin_lock_irqsave(&lpbfifo.lock, flags); + if (lpbfifo.req == req) { + /* Put it into reset and clear the state */ + bcom_gen_bd_rx_reset(lpbfifo.bcom_rx_task); + bcom_gen_bd_tx_reset(lpbfifo.bcom_tx_task); + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + lpbfifo.req = NULL; + } + spin_unlock_irqrestore(&lpbfifo.lock, flags); +} +EXPORT_SYMBOL(mpc52xx_lpbfifo_abort); + +static int __devinit +mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match) +{ + struct resource res; + int rc = -ENOMEM; + + if (lpbfifo.dev != NULL) + return -ENOSPC; + + lpbfifo.irq = irq_of_parse_and_map(op->node, 0); + if (!lpbfifo.irq) + return -ENODEV; + + if (of_address_to_resource(op->node, 0, &res)) + return -ENODEV; + lpbfifo.regs_phys = res.start; + lpbfifo.regs = of_iomap(op->node, 0); + if (!lpbfifo.regs) + return -ENOMEM; + + spin_lock_init(&lpbfifo.lock); + + /* Put FIFO into reset */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + + /* Register the interrupt handler */ + rc = request_irq(lpbfifo.irq, mpc52xx_lpbfifo_irq, 0, + "mpc52xx-lpbfifo", &lpbfifo); + if (rc) + goto err_irq; + + /* Request the Bestcomm receive (fifo --> memory) task and IRQ */ + lpbfifo.bcom_rx_task = + bcom_gen_bd_rx_init(2, res.start + LPBFIFO_REG_FIFO_DATA, + BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC, + 16*1024*1024); + if (!lpbfifo.bcom_rx_task) + goto err_bcom_rx; + + rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), + mpc52xx_lpbfifo_bcom_irq, 0, + "mpc52xx-lpbfifo-rx", &lpbfifo); + if (rc) + goto err_bcom_rx_irq; + + /* Request the Bestcomm transmit (memory --> fifo) task and IRQ */ + lpbfifo.bcom_tx_task = + bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA, + BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC); + if (!lpbfifo.bcom_tx_task) + goto err_bcom_tx; + + lpbfifo.dev = &op->dev; + return 0; + + err_bcom_tx: + free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo); + err_bcom_rx_irq: + bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task); + err_bcom_rx: + err_irq: + iounmap(lpbfifo.regs); + lpbfifo.regs = NULL; + + dev_err(&op->dev, "mpc52xx_lpbfifo_probe() failed\n"); + return -ENODEV; +} + + +static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op) +{ + if (lpbfifo.dev != &op->dev) + return 0; + + /* Put FIFO in reset */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + + /* Release the bestcomm transmit task */ + free_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task), &lpbfifo); + bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task); + + /* Release the bestcomm receive task */ + free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo); + bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task); + + free_irq(lpbfifo.irq, &lpbfifo); + iounmap(lpbfifo.regs); + lpbfifo.regs = NULL; + lpbfifo.dev = NULL; + + return 0; +} + +static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = { + { .compatible = "fsl,mpc5200-lpbfifo", }, + {}, +}; + +static struct of_platform_driver mpc52xx_lpbfifo_driver = { + .owner = THIS_MODULE, + .name = "mpc52xx-lpbfifo", + .match_table = mpc52xx_lpbfifo_match, + .probe = mpc52xx_lpbfifo_probe, + .remove = __devexit_p(mpc52xx_lpbfifo_remove), +}; + +/*********************************************************************** + * Module init/exit + */ +static int __init mpc52xx_lpbfifo_init(void) +{ + pr_debug("Registering LocalPlus bus FIFO driver\n"); + return of_register_platform_driver(&mpc52xx_lpbfifo_driver); +} +module_init(mpc52xx_lpbfifo_init); + +static void __exit mpc52xx_lpbfifo_exit(void) +{ + pr_debug("Unregistering LocalPlus bus FIFO driver\n"); + of_unregister_platform_driver(&mpc52xx_lpbfifo_driver); +} +module_exit(mpc52xx_lpbfifo_exit); |