Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (43 commits)
  [POWERPC] Use little-endian bit from firmware ibm,pa-features property
  [POWERPC] Make sure smp_processor_id works very early in boot
  [POWERPC] U4 DART improvements
  [POWERPC] todc: add support for Time-Of-Day-Clock
  [POWERPC] Make lparcfg.c work when both iseries and pseries are selected
  [POWERPC] Fix idr locking in init_new_context
  [POWERPC] mpc7448hpc2 (taiga) board config file
  [POWERPC] Add tsi108 pci and platform device data register function
  [POWERPC] Add general support for mpc7448hpc2 (Taiga) platform
  [POWERPC] Correct the MAX_CONTEXT definition
  powerpc: minor cleanups for mpc86xx
  [POWERPC] Make sure we select CONFIG_NEW_LEDS if ADB_PMU_LED is set
  [POWERPC] Simplify the code defining the 64-bit CPU features
  [POWERPC] powerpc: kconfig warning fix
  [POWERPC] Consolidate some of kernel/misc*.S
  [POWERPC] Remove unused function call_with_mmu_off
  [POWERPC] update asm-powerpc/time.h
  [POWERPC] Clean up it_lp_queue.h
  [POWERPC] Skip the "copy down" of the kernel if it is already at zero.
  [POWERPC] Add the use of the firmware soft-reset-nmi to kdump.
  ...

6 files changed, 999 insertions, 7 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index cef95b023730..054bd8b41ef5 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,3 +12,5 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_PPC_TODC)		+= todc.o
+obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
index c2d05763ccbe..1c8817c4835e 100644
--- a/arch/powerpc/sysdev/dart.h
+++ b/arch/powerpc/sysdev/dart.h
@@ -47,8 +47,12 @@
 /* U4 registers */
 #define DART_BASE_U4_BASE_MASK	0xffffff
 #define DART_BASE_U4_BASE_SHIFT	0
-#define DART_CNTL_U4_FLUSHTLB	0x20000000
 #define DART_CNTL_U4_ENABLE	0x80000000
+#define DART_CNTL_U4_IONE	0x40000000
+#define DART_CNTL_U4_FLUSHTLB	0x20000000
+#define DART_CNTL_U4_IDLE	0x10000000
+#define DART_CNTL_U4_PAR_EN	0x08000000
+#define DART_CNTL_U4_IONE_MASK	0x07ffffff
 #define DART_SIZE_U4_SIZE_MASK	0x1fff
 #define DART_SIZE_U4_SIZE_SHIFT	0
 
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 6232091cc72b..7c7f34ce4986 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -101,8 +101,8 @@ retry:
 	if (l == (1L << limit)) {
 		if (limit < 4) {
 			limit++;
-		        reg = DART_IN(DART_CNTL);
-		        reg &= ~inv_bit;
+			reg = DART_IN(DART_CNTL);
+			reg &= ~inv_bit;
 			DART_OUT(DART_CNTL, reg);
 			goto retry;
 		} else
@@ -111,11 +111,39 @@ retry:
 	}
 }
 
+static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
+{
+	unsigned int reg;
+	unsigned int l, limit;
+
+	reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
+		(bus_rpn & DART_CNTL_U4_IONE_MASK);
+	DART_OUT(DART_CNTL, reg);
+
+	limit = 0;
+wait_more:
+	l = 0;
+	while ((DART_IN(DART_CNTL) & DART_CNTL_U4_IONE) && l < (1L << limit)) {
+		rmb();
+		l++;
+	}
+
+	if (l == (1L << limit)) {
+		if (limit < 4) {
+			limit++;
+			goto wait_more;
+		} else
+			panic("DART: TLB did not flush after waiting a long "
+			      "time. Buggy U4 ?");
+	}
+}
+
 static void dart_flush(struct iommu_table *tbl)
 {
-	if (dart_dirty)
+	if (dart_dirty) {
 		dart_tlb_invalidate_all();
-	dart_dirty = 0;
+		dart_dirty = 0;
+	}
 }
 
 static void dart_build(struct iommu_table *tbl, long index,
@@ -124,6 +152,7 @@ static void dart_build(struct iommu_table *tbl, long index,
 {
 	unsigned int *dp;
 	unsigned int rpn;
+	long l;
 
 	DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
 
@@ -135,7 +164,8 @@ static void dart_build(struct iommu_table *tbl, long index,
 	/* On U3, all memory is contigous, so we can move this
 	 * out of the loop.
 	 */
-	while (npages--) {
+	l = npages;
+	while (l--) {
 		rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
 
 		*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
@@ -143,7 +173,14 @@ static void dart_build(struct iommu_table *tbl, long index,
 		uaddr += DART_PAGE_SIZE;
 	}
 
-	dart_dirty = 1;
+	if (dart_is_u4) {
+		rpn = index;
+		mb(); /* make sure all updates have reached memory */
+		while (npages--)
+			dart_tlb_invalidate_one(rpn++);
+	} else {
+		dart_dirty = 1;
+	}
 }
 
 
diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c
new file mode 100644
index 000000000000..0a65980efb50
--- /dev/null
+++ b/arch/powerpc/sysdev/todc.c
@@ -0,0 +1,392 @@
+/*
+ * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
+ * Real Time Clocks/Timekeepers.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+
+/*
+ * Depending on the hardware on your board and your board design, the
+ * RTC/NVRAM may be accessed either directly (like normal memory) or via
+ * address/data registers.  If your board uses the direct method, set
+ * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
+ * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
+ * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
+ * address of the upper byte (leave NULL if using mc146818), and set
+ * 'nvram_data' to the address of the 8-bit data register.
+ *
+ * Note: Even though the documentation for the various RTC chips say that it
+ * 	 take up to a second before it starts updating once the 'R' bit is
+ * 	 cleared, they always seem to update even though we bang on it many
+ * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
+ * 	 (possibly others).  Those chips seem to have a real problem whenever
+ * 	 we set the 'R' bit before reading them, they basically stop counting.
+ * 	 					--MAG
+ */
+
+/*
+ * 'todc_info' should be initialized in your *_setup.c file to
+ * point to a fully initialized 'todc_info_t' structure.
+ * This structure holds all the register offsets for your particular
+ * TODC/RTC chip.
+ * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
+ */
+
+#ifdef	RTC_FREQ_SELECT
+#undef	RTC_FREQ_SELECT
+#define	RTC_FREQ_SELECT		control_b	/* Register A */
+#endif
+
+#ifdef	RTC_CONTROL
+#undef	RTC_CONTROL
+#define	RTC_CONTROL		control_a	/* Register B */
+#endif
+
+#ifdef	RTC_INTR_FLAGS
+#undef	RTC_INTR_FLAGS
+#define	RTC_INTR_FLAGS		watchdog	/* Register C */
+#endif
+
+#ifdef	RTC_VALID
+#undef	RTC_VALID
+#define	RTC_VALID		interrupts	/* Register D */
+#endif
+
+/* Access routines when RTC accessed directly (like normal memory) */
+u_char
+todc_direct_read_val(int addr)
+{
+	return readb((void __iomem *)(todc_info->nvram_data + addr));
+}
+
+void
+todc_direct_write_val(int addr, unsigned char val)
+{
+	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
+	return;
+}
+
+/* Access routines for accessing m48txx type chips via addr/data regs */
+u_char
+todc_m48txx_read_val(int addr)
+{
+	outb(addr, todc_info->nvram_as0);
+	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
+	return inb(todc_info->nvram_data);
+}
+
+void
+todc_m48txx_write_val(int addr, unsigned char val)
+{
+	outb(addr, todc_info->nvram_as0);
+	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
+	outb(val, todc_info->nvram_data);
+	return;
+}
+
+/* Access routines for accessing mc146818 type chips via addr/data regs */
+u_char
+todc_mc146818_read_val(int addr)
+{
+	outb_p(addr, todc_info->nvram_as0);
+	return inb_p(todc_info->nvram_data);
+}
+
+void
+todc_mc146818_write_val(int addr, unsigned char val)
+{
+	outb_p(addr, todc_info->nvram_as0);
+	outb_p(val, todc_info->nvram_data);
+}
+
+
+/*
+ * Routines to make RTC chips with NVRAM buried behind an addr/data pair
+ * have the NVRAM and clock regs appear at the same level.
+ * The NVRAM will appear to start at addr 0 and the clock regs will appear
+ * to start immediately after the NVRAM (actually, start at offset
+ * todc_info->nvram_size).
+ */
+static inline u_char
+todc_read_val(int addr)
+{
+	u_char	val;
+
+	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
+		if (addr < todc_info->nvram_size) { /* NVRAM */
+			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
+			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
+		} else { /* Clock Reg */
+			addr -= todc_info->nvram_size;
+			val = ppc_md.rtc_read_val(addr);
+		}
+	} else
+		val = ppc_md.rtc_read_val(addr);
+
+	return val;
+}
+
+static inline void
+todc_write_val(int addr, u_char val)
+{
+	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
+		if (addr < todc_info->nvram_size) { /* NVRAM */
+			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
+			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
+		} else { /* Clock Reg */
+			addr -= todc_info->nvram_size;
+			ppc_md.rtc_write_val(addr, val);
+		}
+	} else
+		ppc_md.rtc_write_val(addr, val);
+}
+
+/*
+ * TODC routines
+ *
+ * There is some ugly stuff in that there are assumptions for the mc146818.
+ *
+ * Assumptions:
+ *	- todc_info->control_a has the offset as mc146818 Register B reg
+ *	- todc_info->control_b has the offset as mc146818 Register A reg
+ *	- m48txx control reg's write enable or 'W' bit is same as
+ *	  mc146818 Register B 'SET' bit (i.e., 0x80)
+ *
+ * These assumptions were made to make the code simpler.
+ */
+long __init
+todc_time_init(void)
+{
+	u_char	cntl_b;
+
+	if (!ppc_md.rtc_read_val)
+		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
+	if (!ppc_md.rtc_write_val)
+		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
+
+	cntl_b = todc_read_val(todc_info->control_b);
+
+	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+		if ((cntl_b & 0x70) != 0x20) {
+			printk(KERN_INFO "TODC real-time-clock was stopped."
+				"  Now starting...");
+			cntl_b &= ~0x70;
+			cntl_b |= 0x20;
+		}
+
+		todc_write_val(todc_info->control_b, cntl_b);
+	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
+		u_char mode;
+
+		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
+		/* Make sure countdown clear is not set */
+		mode &= ~0x40;
+		/* Enable oscillator, extended register set */
+		mode |= 0x30;
+		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
+
+	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
+		u_char	month;
+
+		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
+		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
+
+		month = todc_read_val(todc_info->month);
+
+		if ((month & 0x80) == 0x80) {
+			printk(KERN_INFO "TODC %s %s\n",
+				"real-time-clock was stopped.",
+				"Now starting...");
+			month &= ~0x80;
+			todc_write_val(todc_info->month, month);
+		}
+
+		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
+		todc_write_val(todc_info->control_b, cntl_b);
+	} else { /* must be a m48txx type */
+		u_char	cntl_a;
+
+		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
+		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
+
+		cntl_a = todc_read_val(todc_info->control_a);
+
+		/* Check & clear STOP bit in control B register */
+		if (cntl_b & TODC_MK48TXX_DAY_CB) {
+			printk(KERN_INFO "TODC %s %s\n",
+				"real-time-clock was stopped.",
+				"Now starting...");
+
+			cntl_a |= todc_info->enable_write;
+			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
+
+			todc_write_val(todc_info->control_a, cntl_a);
+			todc_write_val(todc_info->control_b, cntl_b);
+		}
+
+		/* Make sure READ & WRITE bits are cleared. */
+		cntl_a &= ~(todc_info->enable_write | todc_info->enable_read);
+		todc_write_val(todc_info->control_a, cntl_a);
+	}
+
+	return 0;
+}
+
+/*
+ * There is some ugly stuff in that there are assumptions that for a mc146818,
+ * the todc_info->control_a has the offset of the mc146818 Register B reg and
+ * that the register'ss 'SET' bit is the same as the m48txx's write enable
+ * bit in the control register of the m48txx (i.e., 0x80).
+ *
+ * It was done to make the code look simpler.
+ */
+void
+todc_get_rtc_time(struct rtc_time *tm)
+{
+	uint	year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0;
+	uint	limit, i;
+	u_char	save_control, uip = 0;
+	extern void GregorianDay(struct rtc_time *);
+
+	spin_lock(&rtc_lock);
+	save_control = todc_read_val(todc_info->control_a);
+
+	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
+		limit = 1;
+
+		switch (todc_info->rtc_type) {
+		case TODC_TYPE_DS1553:
+		case TODC_TYPE_DS1557:
+		case TODC_TYPE_DS1743:
+		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
+		case TODC_TYPE_DS1747:
+		case TODC_TYPE_DS17285:
+			break;
+		default:
+			todc_write_val(todc_info->control_a,
+				(save_control | todc_info->enable_read));
+		}
+	} else
+		limit = 100000000;
+
+	for (i=0; i<limit; i++) {
+		if (todc_info->rtc_type == TODC_TYPE_MC146818)
+			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
+
+		sec = todc_read_val(todc_info->seconds) & 0x7f;
+		min = todc_read_val(todc_info->minutes) & 0x7f;
+		hour = todc_read_val(todc_info->hours) & 0x3f;
+		mday = todc_read_val(todc_info->day_of_month) & 0x3f;
+		mon = todc_read_val(todc_info->month) & 0x1f;
+		year = todc_read_val(todc_info->year) & 0xff;
+
+		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
+			if ((uip & RTC_UIP) == 0)
+				break;
+		}
+	}
+
+	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
+		switch (todc_info->rtc_type) {
+		case TODC_TYPE_DS1553:
+		case TODC_TYPE_DS1557:
+		case TODC_TYPE_DS1743:
+		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
+		case TODC_TYPE_DS1747:
+		case TODC_TYPE_DS17285:
+			break;
+		default:
+			save_control &= ~(todc_info->enable_read);
+			todc_write_val(todc_info->control_a, save_control);
+		}
+	}
+	spin_unlock(&rtc_lock);
+
+	if ((todc_info->rtc_type != TODC_TYPE_MC146818)
+			|| ((save_control & RTC_DM_BINARY) == 0)
+			|| RTC_ALWAYS_BCD) {
+		BCD_TO_BIN(sec);
+		BCD_TO_BIN(min);
+		BCD_TO_BIN(hour);
+		BCD_TO_BIN(mday);
+		BCD_TO_BIN(mon);
+		BCD_TO_BIN(year);
+	}
+
+	if ((year + 1900) < 1970) {
+		year += 100;
+	}
+
+	tm->tm_sec = sec;
+	tm->tm_min = min;
+	tm->tm_hour = hour;
+	tm->tm_mday = mday;
+	tm->tm_mon = mon;
+	tm->tm_year = year;
+
+	GregorianDay(tm);
+}
+
+int
+todc_set_rtc_time(struct rtc_time *tm)
+{
+	u_char save_control, save_freq_select = 0;
+
+	spin_lock(&rtc_lock);
+	save_control = todc_read_val(todc_info->control_a);
+
+	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
+	todc_write_val(todc_info->control_a,
+		(save_control | todc_info->enable_write));
+	save_control &= ~(todc_info->enable_write); /* in case it was set */
+
+	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
+		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
+		todc_write_val(todc_info->RTC_FREQ_SELECT,
+			save_freq_select | RTC_DIV_RESET2);
+	}
+
+	if ((todc_info->rtc_type != TODC_TYPE_MC146818)
+			|| ((save_control & RTC_DM_BINARY) == 0)
+			|| RTC_ALWAYS_BCD) {
+		BIN_TO_BCD(tm->tm_sec);
+		BIN_TO_BCD(tm->tm_min);
+		BIN_TO_BCD(tm->tm_hour);
+		BIN_TO_BCD(tm->tm_mon);
+		BIN_TO_BCD(tm->tm_mday);
+		BIN_TO_BCD(tm->tm_year);
+	}
+
+	todc_write_val(todc_info->seconds, tm->tm_sec);
+	todc_write_val(todc_info->minutes, tm->tm_min);
+	todc_write_val(todc_info->hours, tm->tm_hour);
+	todc_write_val(todc_info->month, tm->tm_mon);
+	todc_write_val(todc_info->day_of_month, tm->tm_mday);
+	todc_write_val(todc_info->year, tm->tm_year);
+
+	todc_write_val(todc_info->control_a, save_control);
+
+	if (todc_info->rtc_type == TODC_TYPE_MC146818)
+		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
+
+	spin_unlock(&rtc_lock);
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
new file mode 100644
index 000000000000..26a0cc820cde
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -0,0 +1,145 @@
+/*
+ * tsi108/109 device setup code
+ *
+ * Maintained by Roy Zang < tie-fei.zang@freescale.com >
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/tsi108.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+static phys_addr_t tsi108_csr_base = -1;
+
+phys_addr_t get_csrbase(void)
+{
+	struct device_node *tsi;
+
+	if (tsi108_csr_base != -1)
+		return tsi108_csr_base;
+
+	tsi = of_find_node_by_type(NULL, "tsi-bridge");
+	if (tsi) {
+		unsigned int size;
+		void *prop = get_property(tsi, "reg", &size);
+		tsi108_csr_base = of_translate_address(tsi, prop);
+		of_node_put(tsi);
+	};
+	return tsi108_csr_base;
+}
+
+u32 get_vir_csrbase(void)
+{
+	return (u32) (ioremap(get_csrbase(), 0x10000));
+}
+
+EXPORT_SYMBOL(get_csrbase);
+EXPORT_SYMBOL(get_vir_csrbase);
+
+static int __init tsi108_eth_of_init(void)
+{
+	struct device_node *np;
+	unsigned int i;
+	struct platform_device *tsi_eth_dev;
+	struct resource res;
+	int ret;
+
+	for (np = NULL, i = 0;
+	     (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL;
+	     i++) {
+		struct resource r[2];
+		struct device_node *phy;
+		hw_info tsi_eth_data;
+		unsigned int *id;
+		unsigned int *phy_id;
+		void *mac_addr;
+		phandle *ph;
+
+		memset(r, 0, sizeof(r));
+		memset(&tsi_eth_data, 0, sizeof(tsi_eth_data));
+
+		ret = of_address_to_resource(np, 0, &r[0]);
+		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+			__FUNCTION__,r[0].name, r[0].start, r[0].end);
+		if (ret)
+			goto err;
+
+		r[1].name = "tx";
+		r[1].start = np->intrs[0].line;
+		r[1].end = np->intrs[0].line;
+		r[1].flags = IORESOURCE_IRQ;
+
+		tsi_eth_dev =
+		    platform_device_register_simple("tsi-ethernet", i, &r[0],
+						    np->n_intrs + 1);
+
+		if (IS_ERR(tsi_eth_dev)) {
+			ret = PTR_ERR(tsi_eth_dev);
+			goto err;
+		}
+
+		mac_addr = get_property(np, "address", NULL);
+		memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
+
+		ph = (phandle *) get_property(np, "phy-handle", NULL);
+		phy = of_find_node_by_phandle(*ph);
+
+		if (phy == NULL) {
+			ret = -ENODEV;
+			goto unreg;
+		}
+
+		id = (u32 *) get_property(phy, "reg", NULL);
+		phy_id = (u32 *) get_property(phy, "phy-id", NULL);
+		ret = of_address_to_resource(phy, 0, &res);
+		if (ret) {
+			of_node_put(phy);
+			goto unreg;
+		}
+		tsi_eth_data.regs = r[0].start;
+		tsi_eth_data.phyregs = res.start;
+		tsi_eth_data.phy = *phy_id;
+		tsi_eth_data.irq_num = np->intrs[0].line;
+		of_node_put(phy);
+		ret =
+		    platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
+					     sizeof(hw_info));
+		if (ret)
+			goto unreg;
+	}
+	return 0;
+unreg:
+	platform_device_unregister(tsi_eth_dev);
+err:
+	return ret;
+}
+
+arch_initcall(tsi108_eth_of_init);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
new file mode 100644
index 000000000000..3265d54c82ed
--- /dev/null
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -0,0 +1,412 @@
+/*
+ * Common routines for Tundra Semiconductor TSI108 host bridge.
+ *
+ * 2004-2005 (c) Tundra Semiconductor Corp.
+ * Author: Alex Bounine (alexandreb@tundra.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/tsi108.h>
+#include <asm/tsi108_irq.h>
+#include <asm/prom.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define tsi_mk_config_addr(bus, devfunc, offset) \
+	((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
+
+u32 tsi108_pci_cfg_base;
+u32 tsi108_csr_vir_base;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_read_reg(u32 reg_offset);
+extern void tsi108_write_reg(u32 reg_offset, u32 val);
+
+int
+tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
+			   int offset, int len, u32 val)
+{
+	volatile unsigned char *cfg_addr;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfunc))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
+							devfunc, offset) |
+							(offset & 0x03));
+
+#ifdef DEBUG
+	printk("PCI CFG write : ");
+	printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
+	printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
+	printk("data = 0x%08x\n", val);
+#endif
+
+	switch (len) {
+	case 1:
+		out_8((u8 *) cfg_addr, val);
+		break;
+	case 2:
+		out_le16((u16 *) cfg_addr, val);
+		break;
+	default:
+		out_le32((u32 *) cfg_addr, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+void tsi108_clear_pci_error(u32 pci_cfg_base)
+{
+	u32 err_stat, err_addr, pci_stat;
+
+	/*
+	 * Quietly clear PB and PCI error flags set as result
+	 * of PCI/X configuration read requests.
+	 */
+
+	/* Read PB Error Log Registers */
+
+	err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS);
+	err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR);
+
+	if (err_stat & TSI108_PB_ERRCS_ES) {
+		/* Clear error flag */
+		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS,
+				 TSI108_PB_ERRCS_ES);
+
+		/* Clear read error reported in PB_ISR */
+		tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR,
+				 TSI108_PB_ISR_PBS_RD_ERR);
+
+		/* Clear PCI/X bus cfg errors if applicable */
+		if ((err_addr & 0xFF000000) == pci_cfg_base) {
+			pci_stat =
+			    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR);
+			tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR,
+					 pci_stat);
+		}
+	}
+
+	return;
+}
+
+#define __tsi108_read_pci_config(x, addr, op)		\
+	__asm__ __volatile__(				\
+		"	"op" %0,0,%1\n"		\
+		"1:	eieio\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,-1\n"			\
+		"	b 2b\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align 2\n"			\
+		"	.long 1b,3b\n"			\
+		".text"					\
+		: "=r"(x) : "r"(addr))
+
+int
+tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+			  int len, u32 * val)
+{
+	volatile unsigned char *cfg_addr;
+	u32 temp;
+
+	if (ppc_md.pci_exclude_device)
+		if (ppc_md.pci_exclude_device(bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+	cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number,
+							devfn,
+							offset) | (offset &
+								   0x03));
+
+	switch (len) {
+	case 1:
+		__tsi108_read_pci_config(temp, cfg_addr, "lbzx");
+		break;
+	case 2:
+		__tsi108_read_pci_config(temp, cfg_addr, "lhbrx");
+		break;
+	default:
+		__tsi108_read_pci_config(temp, cfg_addr, "lwbrx");
+		break;
+	}
+
+	*val = temp;
+
+#ifdef DEBUG
+	if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) {
+		printk("PCI CFG read : ");
+		printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
+		printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
+		printk("data = 0x%x\n", *val);
+	}
+#endif
+	return PCIBIOS_SUCCESSFUL;
+}
+
+void tsi108_clear_pci_cfg_error(void)
+{
+	tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS);
+}
+
+static struct pci_ops tsi108_direct_pci_ops = {
+	tsi108_direct_read_config,
+	tsi108_direct_write_config
+};
+
+int __init tsi108_setup_pci(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	int *bus_range;
+	int primary = 0, has_address = 0;
+
+	/* PCI Config mapping */
+	tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS,
+			TSI108_PCI_CFG_SIZE);
+	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+	    tsi108_pci_cfg_base);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = (int *)get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose) {
+		printk("PCI Host bridge init failed\n");
+		return -ENOMEM;
+	}
+	hose->arch_data = dev;
+	hose->set_cfg_type = 1;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	(hose)->ops = &tsi108_direct_pci_ops;
+
+	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+	       "Firmware bus number: %d->%d\n",
+	       rsrc.start, hose->first_busno, hose->last_busno);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+	return 0;
+}
+
+/*
+ * Low level utility functions
+ */
+
+static void tsi108_pci_int_mask(u_int irq)
+{
+	u_int irp_cfg;
+	int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+	mb();
+	irp_cfg |= (1 << int_line);	/* INTx_DIR = output */
+	irp_cfg &= ~(3 << (8 + (int_line * 2)));	/* INTx_TYPE = unused */
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+	mb();
+	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+}
+
+static void tsi108_pci_int_unmask(u_int irq)
+{
+	u_int irp_cfg;
+	int int_line = (irq - IRQ_PCI_INTAD_BASE);
+
+	irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+	mb();
+	irp_cfg &= ~(1 << int_line);
+	irp_cfg |= (3 << (8 + (int_line * 2)));
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg);
+	mb();
+}
+
+static void init_pci_source(void)
+{
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL,
+			0x0000ff00);
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+			TSI108_PCI_IRP_ENABLE_P_INT);
+	mb();
+}
+
+static inline int get_pci_source(void)
+{
+	u_int temp = 0;
+	int irq = -1;
+	int i;
+	u_int pci_irp_stat;
+	static int mask = 0;
+
+	/* Read PCI/X block interrupt status register */
+	pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+	mb();
+
+	if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) {
+		/* Process Interrupt from PCI bus INTA# - INTD# lines */
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET +
+				    TSI108_PCI_IRP_INTAD) & 0xf;
+		mb();
+		for (i = 0; i < 4; i++, mask++) {
+			if (temp & (1 << mask % 4)) {
+				irq = IRQ_PCI_INTA + mask % 4;
+				mask++;
+				break;
+			}
+		}
+
+		/* Disable interrupts from PCI block */
+		temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+		tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+				temp & ~TSI108_PCI_IRP_ENABLE_P_INT);
+		mb();
+		(void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+		mb();
+	}
+#ifdef DEBUG
+	else {
+		printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
+		pci_irp_stat =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT);
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD);
+		mb();
+		printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL);
+		mb();
+		printk("cfg_ctl=0x%08x ", temp);
+		temp =
+		    tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE);
+		mb();
+		printk("irp_enable=0x%08x\n", temp);
+	}
+#endif	/* end of DEBUG */
+
+	return irq;
+}
+
+
+/*
+ * Linux descriptor level callbacks
+ */
+
+static void tsi108_pci_irq_enable(u_int irq)
+{
+	tsi108_pci_int_unmask(irq);
+}
+
+static void tsi108_pci_irq_disable(u_int irq)
+{
+	tsi108_pci_int_mask(irq);
+}
+
+static void tsi108_pci_irq_ack(u_int irq)
+{
+	tsi108_pci_int_mask(irq);
+}
+
+static void tsi108_pci_irq_end(u_int irq)
+{
+	tsi108_pci_int_unmask(irq);
+
+	/* Enable interrupts from PCI block */
+	tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE,
+			 tsi108_read_reg(TSI108_PCI_OFFSET +
+					 TSI108_PCI_IRP_ENABLE) |
+			 TSI108_PCI_IRP_ENABLE_P_INT);
+	mb();
+}
+
+/*
+ * Interrupt controller descriptor for cascaded PCI interrupt controller.
+ */
+
+struct hw_interrupt_type tsi108_pci_irq = {
+	.typename = "tsi108_PCI_int",
+	.enable = tsi108_pci_irq_enable,
+	.disable = tsi108_pci_irq_disable,
+	.ack = tsi108_pci_irq_ack,
+	.end = tsi108_pci_irq_end,
+};
+
+/*
+ * Exported functions
+ */
+
+/*
+ * The Tsi108 PCI interrupts initialization routine.
+ *
+ * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block
+ * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the
+ * PCI block has to be treated as a cascaded interrupt controller connected
+ * to the MPIC.
+ */
+
+void __init tsi108_pci_int_init(void)
+{
+	u_int i;
+
+	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
+
+	for (i = 0; i < NUM_PCI_IRQS; i++) {
+		irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+		irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
+	}
+
+	init_pci_source();
+}
+
+int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+{
+	return get_pci_source();
+}