diff options
author | David Gibson <david@gibson.dropbear.id.au> | 2008-05-15 08:46:39 +0200 |
---|---|---|
committer | Josh Boyer <jwboyer@linux.vnet.ibm.com> | 2008-05-29 14:06:56 +0200 |
commit | 71f349799b34c8b6ce3df42126b4de6cfa16456d (patch) | |
tree | 995a9385920e7be80ea9a872442caf1d475c935a /arch/powerpc | |
parent | [POWERPC] Refactor DCR code (diff) | |
download | linux-71f349799b34c8b6ce3df42126b4de6cfa16456d.tar.xz linux-71f349799b34c8b6ce3df42126b4de6cfa16456d.zip |
[POWERPC] Convert remaining dts-v0 files to v1
At the moment we have a mixture of left-over version 0 and new-format
version 1 files in arch/powerpc/boot/dts. This is potentially
confusing to people new to the dts format attempting to figure it out.
So, this patch converts all the as-yet unconverted dts v0 files and
converts them to v1. They're mechanically-converted, and not hand
tweaked so in some cases they're not 100% in keeping with usual v1
style, but the convertor program does have some heuristics so the
discrepancies aren't too bad.
I have checked that this patch produces no changes to the resulting
dtb binaries.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/boot/dts/bamboo.dts | 142 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/canyonlands.dts | 222 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/ebony.dts | 164 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/ep405.dts | 100 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/glacier.dts | 262 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/haleakala.dts | 136 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/holly.dts | 122 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/katmai.dts | 210 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/kilauea.dts | 182 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/makalu.dts | 182 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/ps3.dts | 16 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/rainier.dts | 162 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/sequoia.dts | 172 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/taishan.dts | 212 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/walnut.dts | 118 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/warp.dts | 106 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/yosemite.dts | 146 |
17 files changed, 1344 insertions, 1310 deletions
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index ba2521bdaab1..6ce0cc2c0208 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -11,12 +11,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,bamboo"; compatible = "amcc,bamboo"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -34,13 +36,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -48,14 +50,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -65,22 +67,22 @@ compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -92,29 +94,29 @@ SDRAM0: sdram { compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440ep", "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; }; POB0: opb { @@ -124,101 +126,101 @@ /* Bamboo is oddball in the 44x world and doesn't use the ERPN * bits. */ - ranges = <00000000 0 00000000 80000000 - 80000000 0 80000000 80000000>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600500 8>; - virtual-reg = <ef600500>; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600600 8>; - virtual-reg = <ef600600>; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = <ef600800 14>; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <ef600e00 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; @@ -227,26 +229,26 @@ device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = <ef600f00 70>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <2 3>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; usb@ef601000 { compatible = "ohci-be"; - reg = <ef601000 80>; - interrupts = <8 1 9 1>; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; interrupt-parent = < &UIC1 >; }; }; @@ -258,35 +260,35 @@ #address-cells = <3>; compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; primary; - reg = <0 eec00000 8 /* Config space access */ - 0 eed00000 4 /* IACK */ - 0 eed00000 4 /* Special cycle */ - 0 ef400000 40>; /* Internal registers */ + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 a0000000 0 a0000000 0 20000000 - 01000000 0 00000000 0 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* Bamboo has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = <f800 0 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 1c 8 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 1b 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 1a 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 19 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 39634124929b..f9fe03252150 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,canyonlands"; compatible = "amcc,canyonlands"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,460EX"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -60,11 +62,11 @@ compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -72,11 +74,11 @@ compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <a 4 b 4>; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -84,22 +86,22 @@ compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-460ex"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-460ex"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -111,74 +113,74 @@ SDRAM0: sdram { compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; - num-rx-chans = <10>; + num-rx-chans = <16>; #address-cells = <0>; #size-cells = <0>; interrupt-parent = <&UIC2>; - interrupts = < /*TXEOB*/ 6 4 - /*RXEOB*/ 7 4 - /*SERR*/ 3 4 - /*TXDE*/ 4 4 - /*RXDE*/ 5 4>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; }; POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <b0000000 4 b0000000 50000000>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-460ex", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <6 4>; + interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 1e0000>; + reg = <0x00000000 0x001e0000>; }; partition@1e0000 { label = "dtb"; - reg = <1e0000 20000>; + reg = <0x001e0000 0x00020000>; }; partition@200000 { label = "ramdisk"; - reg = <200000 1400000>; + reg = <0x00200000 0x01400000>; }; partition@1600000 { label = "jffs2"; - reg = <1600000 400000>; + reg = <0x01600000 0x00400000>; }; partition@1a00000 { label = "user"; - reg = <1a00000 2560000>; + reg = <0x01a00000 0x02560000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -186,103 +188,103 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600500 8>; - virtual-reg = <ef600500>; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1d 4>; + interrupts = <0x1d 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600600 8>; - virtual-reg = <ef600600>; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1e 4>; + interrupts = <0x1e 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-460ex", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-460ex", "ibm,iic"; - reg = <ef600800 14>; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-460ex", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601500 { compatible = "ibm,rgmii-460ex", "ibm,rgmii"; - reg = <ef601500 8>; + reg = <0xef601500 0x00000008>; has-mdio; }; TAH0: emac-tah@ef601350 { compatible = "ibm,tah-460ex", "ibm,tah"; - reg = <ef601350 30>; + reg = <0xef601350 0x00000030>; }; TAH1: emac-tah@ef601450 { compatible = "ibm,tah-460ex", "ibm,tah"; - reg = <ef601450 30>; + reg = <0xef601450 0x00000030>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-460ex", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC2 10 4 - /*Wake*/ 1 &UIC2 14 4>; - reg = <ef600e00 70>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; tah-device = <&TAH0>; @@ -295,23 +297,23 @@ device_type = "network"; compatible = "ibm,emac-460ex", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC2 11 4 - /*Wake*/ 1 &UIC2 15 4>; - reg = <ef600f00 70>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <8>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; tah-device = <&TAH1>; @@ -331,27 +333,27 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <c 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - c 0ed00000 4 /* Special cycles */ - c 0ec80000 100 /* Internal registers */ - c 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0x3f */ - bus-range = <0 3f>; + bus-range = <0x0 0x3f>; /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; }; PCIE0: pciex@d00000000 { @@ -361,23 +363,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <d 00000000 20000000 /* Config space access */ - c 08010000 00001000>; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -387,12 +389,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -402,23 +404,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = <d 20000000 20000000 /* Config space access */ - c 08011000 00001000>; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 80 to 0xbf */ - bus-range = <80 bf>; + bus-range = <0x80 0xbf>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -428,12 +430,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 5079dc890e0e..ec2d142291b4 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -11,12 +11,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "ibm,ebony"; compatible = "ibm,ebony"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -32,13 +34,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440GP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; // Filled in by zImage timebase-frequency = <0>; // Filled in by zImage - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; /* 32 kB */ - d-cache-size = <8000>; /* 32 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -46,14 +48,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; // Filled in by zImage + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440gp", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,17 +66,17 @@ compatible = "ibm,uic-440gp", "ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; CPC0: cpc { compatible = "ibm,cpc-440gp"; - dcr-reg = <0b0 003 0e0 010>; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; // FIXME: anything else? }; @@ -87,37 +89,37 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-440gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; // FIXME: anything else? }; SRAM0: sram { compatible = "ibm,sram-440gp"; - dcr-reg = <020 8 00a 1>; + dcr-reg = <0x020 0x008 0x00a 0x001>; }; DMA0: dma { // FIXME: ??? compatible = "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <4>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { @@ -126,34 +128,34 @@ #size-cells = <1>; /* Wish there was a nicer way of specifying a full 32-bit range */ - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; - dcr-reg = <090 00b>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; // Filled in by zImage EBC0: ebc { compatible = "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; // Filled in by zImage // ranges property is supplied by zImage // based on firmware's configuration of the // EBC bridge - interrupts = <5 4>; + interrupts = <0x5 0x4>; interrupt-parent = <&UIC1>; small-flash@0,80000 { compatible = "jedec-flash"; bank-width = <1>; - reg = <0 80000 80000>; + reg = <0x00000000 0x00080000 0x00080000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "OpenBIOS"; - reg = <0 80000>; + reg = <0x00000000 0x00080000>; read-only; }; }; @@ -161,101 +163,101 @@ nvram@1,0 { /* NVRAM & RTC */ compatible = "ds1743-nvram"; - #bytes = <2000>; - reg = <1 0 2000>; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; }; large-flash@2,0 { compatible = "jedec-flash"; bank-width = <1>; - reg = <2 0 400000>; + reg = <0x00000002 0x00000000 0x00400000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "fs"; - reg = <0 380000>; + reg = <0x00000000 0x00380000>; }; partition@380000 { label = "firmware"; - reg = <380000 80000>; + reg = <0x00380000 0x00080000>; }; }; ir@3,0 { - reg = <3 0 10>; + reg = <0x00000003 0x00000000 0x00000010>; }; fpga@7,0 { compatible = "Ebony-FPGA"; - reg = <7 0 10>; - virtual-reg = <e8300000>; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xe8300000>; }; }; UART0: serial@40000200 { device_type = "serial"; compatible = "ns16550"; - reg = <40000200 8>; - virtual-reg = <e0000200>; - clock-frequency = <A8C000>; - current-speed = <2580>; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@40000300 { device_type = "serial"; compatible = "ns16550"; - reg = <40000300 8>; - virtual-reg = <e0000300>; - clock-frequency = <A8C000>; - current-speed = <2580>; + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@40000400 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000400 14>; + reg = <0x40000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@40000500 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000500 14>; + reg = <0x40000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; GPIO0: gpio@40000700 { /* FIXME */ compatible = "ibm,gpio-440gp"; - reg = <40000700 20>; + reg = <0x40000700 0x00000020>; }; ZMII0: emac-zmii@40000780 { compatible = "ibm,zmii-440gp", "ibm,zmii"; - reg = <40000780 c>; + reg = <0x40000780 0x0000000c>; }; EMAC0: ethernet@40000800 { device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <40000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; @@ -263,18 +265,18 @@ device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = <40000900 70>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <2 3>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; @@ -282,9 +284,9 @@ GPT0: gpt@40000a00 { /* FIXME */ - reg = <40000a00 d4>; + reg = <0x40000a00 0x000000d4>; interrupt-parent = <&UIC0>; - interrupts = <12 4 13 4 14 4 15 4 16 4>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; }; }; @@ -296,35 +298,35 @@ #address-cells = <3>; compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; primary; - reg = <2 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - 2 0ed00000 4 /* Special cycles */ - 2 0ec80000 f0 /* Internal registers */ - 2 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x000000f0 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 00000003 80000000 0 80000000 - 01000000 0 00000000 00000002 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* Ebony has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = <f800 0 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 17 8 + 0x800 0x0 0x0 0x0 &UIC0 0x17 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 18 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 19 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 1a 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts index 92938557ac8a..53ef06cc2134 100644 --- a/arch/powerpc/boot/dts/ep405.dts +++ b/arch/powerpc/boot/dts/ep405.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "ep405"; compatible = "ep405"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405GP"; - reg = <0>; - clock-frequency = <bebc200>; /* Filled in by zImage */ + reg = <0x00000000>; + clock-frequency = <200000000>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller { compatible = "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 9>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -65,91 +67,91 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL: mcmal { compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <1>; num-rx-chans = <1>; interrupt-parent = <&UIC0>; interrupts = < - b 4 /* TXEOB */ - c 4 /* RXEOB */ - a 4 /* SERR */ - d 4 /* TXDE */ - e 4 /* RXDE */>; + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; }; POB0: opb { compatible = "ibm,opb-405gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <ef600000 ef600000 a00000>; - dcr-reg = <0a0 5>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by zImage */ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC: i2c@ef600500 { compatible = "ibm,iic-405gp", "ibm,iic"; - reg = <ef600500 11>; + reg = <0xef600500 0x00000011>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; GPIO: gpio@ef600700 { compatible = "ibm,gpio-405gp"; - reg = <ef600700 20>; + reg = <0xef600700 0x00000020>; }; EMAC: ethernet@ef600800 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; interrupts = < - f 4 /* Ethernet */ - 9 4 /* Ethernet Wake Up */>; + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <ef600800 70>; + reg = <0xef600800 0x00000070>; mal-device = <&MAL>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; }; }; EBC0: ebc { compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; @@ -163,13 +165,13 @@ /* NVRAM and RTC */ nvrtc@4,200000 { compatible = "ds1742"; - reg = <4 200000 0>; /* size fixed up by zImage */ + reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */ }; /* "BCSR" CPLD contains a PCI irq controller */ bcsr@4,0 { compatible = "ep405-bcsr"; - reg = <4 0 10>; + reg = <0x00000004 0x00000000 0x00000010>; interrupt-controller; /* Routing table */ irq-routing = [ 00 /* SYSERR */ @@ -198,26 +200,26 @@ #address-cells = <3>; compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; primary; - reg = <eec00000 8 /* Config space access */ - eed80000 4 /* IACK */ - eed80000 4 /* Special cycle */ - ef480000 40>; /* Internal registers */ + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* That's all I know about IRQs on that thing ... */ - interrupt-map-mask = <f800 0 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* USB */ - 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */ + 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */ >; }; }; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index 0f2fc077d8db..463650c5f61d 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,glacier"; compatible = "amcc,glacier", "amcc,canyonlands"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -31,13 +33,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,460GT"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -45,14 +47,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -62,11 +64,11 @@ compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -74,11 +76,11 @@ compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <a 4 b 4>; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -86,22 +88,22 @@ compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-460gt"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-460gt"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -113,75 +115,75 @@ SDRAM0: sdram { compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; - num-rx-chans = <20>; + num-rx-chans = <32>; #address-cells = <0>; #size-cells = <0>; interrupt-parent = <&UIC2>; - interrupts = < /*TXEOB*/ 6 4 - /*RXEOB*/ 7 4 - /*SERR*/ 3 4 - /*TXDE*/ 4 4 - /*RXDE*/ 5 4>; - desc-base-addr-high = <8>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; }; POB0: opb { compatible = "ibm,opb-460gt", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <b0000000 4 b0000000 50000000>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-460gt", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <6 4>; + interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 1e0000>; + reg = <0x00000000 0x001e0000>; }; partition@1e0000 { label = "dtb"; - reg = <1e0000 20000>; + reg = <0x001e0000 0x00020000>; }; partition@200000 { label = "ramdisk"; - reg = <200000 1400000>; + reg = <0x00200000 0x01400000>; }; partition@1600000 { label = "jffs2"; - reg = <1600000 400000>; + reg = <0x01600000 0x00400000>; }; partition@1a00000 { label = "user"; - reg = <1a00000 2560000>; + reg = <0x01a00000 0x02560000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -189,109 +191,109 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600500 8>; - virtual-reg = <ef600500>; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1d 4>; + interrupts = <0x1d 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600600 8>; - virtual-reg = <ef600600>; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1e 4>; + interrupts = <0x1e 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-460gt", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-460gt", "ibm,iic"; - reg = <ef600800 14>; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-460gt", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601500 { compatible = "ibm,rgmii-460gt", "ibm,rgmii"; - reg = <ef601500 8>; + reg = <0xef601500 0x00000008>; has-mdio; }; RGMII1: emac-rgmii@ef601600 { compatible = "ibm,rgmii-460gt", "ibm,rgmii"; - reg = <ef601600 8>; + reg = <0xef601600 0x00000008>; has-mdio; }; TAH0: emac-tah@ef601350 { compatible = "ibm,tah-460gt", "ibm,tah"; - reg = <ef601350 30>; + reg = <0xef601350 0x00000030>; }; TAH1: emac-tah@ef601450 { compatible = "ibm,tah-460gt", "ibm,tah"; - reg = <ef601450 30>; + reg = <0xef601450 0x00000030>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC2 10 4 - /*Wake*/ 1 &UIC2 14 4>; - reg = <ef600e00 70>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; tah-device = <&TAH0>; @@ -304,23 +306,23 @@ device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC2 11 4 - /*Wake*/ 1 &UIC2 15 4>; - reg = <ef600f00 70>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <8>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; tah-device = <&TAH1>; @@ -334,23 +336,23 @@ device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC2>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC2 12 4 - /*Wake*/ 1 &UIC2 16 4>; - reg = <ef601100 70>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 + /*Wake*/ 0x1 &UIC2 0x16 0x4>; + reg = <0xef601100 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <2>; - mal-rx-channel = <10>; + mal-rx-channel = <16>; cell-index = <2>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII1>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -362,23 +364,23 @@ device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC3>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC2 13 4 - /*Wake*/ 1 &UIC2 17 4>; - reg = <ef601200 70>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x17 0x4>; + reg = <0xef601200 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <3>; - mal-rx-channel = <18>; + mal-rx-channel = <24>; cell-index = <3>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII1>; rgmii-channel = <1>; has-inverted-stacr-oc; @@ -396,27 +398,27 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <c 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - c 0ed00000 4 /* Special cycles */ - c 0ec80000 100 /* Internal registers */ - c 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0x3f */ - bus-range = <0 3f>; + bus-range = <0x0 0x3f>; /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; }; PCIE0: pciex@d00000000 { @@ -426,23 +428,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <d 00000000 20000000 /* Config space access */ - c 08010000 00001000>; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -452,12 +454,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -467,23 +469,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = <d 20000000 20000000 /* Config space access */ - c 08011000 00001000>; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 80 to 0xbf */ - bus-range = <80 bf>; + bus-range = <0x80 0xbf>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -493,12 +495,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index b5d95ac24dbf..2c2fceaabbcd 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "amcc,haleakala"; compatible = "amcc,haleakala", "amcc,kilauea"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -28,13 +30,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405EXr"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; /* 16 kB */ - d-cache-size = <4000>; /* 16 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -42,14 +44,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller { compatible = "ibm,uic-405exr", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -59,11 +61,11 @@ compatible = "ibm,uic-405exr","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -71,11 +73,11 @@ compatible = "ibm,uic-405exr","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -88,72 +90,72 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405exr"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-405exr", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <80000000 80000000 10000000 - ef600000 ef600000 a00000 - f0000000 f0000000 10000000>; - dcr-reg = <0a0 5>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-405exr", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 200000>; + reg = <0x00000000 0x00200000>; }; partition@200000 { label = "root"; - reg = <200000 200000>; + reg = <0x00200000 0x00200000>; }; partition@400000 { label = "user"; - reg = <400000 3b60000>; + reg = <0x00400000 0x03b60000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -161,68 +163,68 @@ UART0: serial@ef600200 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600200 8>; - virtual-reg = <ef600200>; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; + interrupts = <0x1a 0x4>; }; UART1: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@ef600400 { compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <ef600400 14>; + reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600500 { compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <ef600500 14>; + reg = <0xef600500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405exr", "ibm,rgmii"; - reg = <ef600b00 104>; + reg = <0xef600b00 0x00000104>; has-mdio; }; EMAC0: ethernet@ef600900 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405exr", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 18 4 - /*Wake*/ 1 &UIC1 1d 4>; - reg = <ef600900 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -237,23 +239,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <a0000000 20000000 /* Config space access */ - ef000000 00001000>; /* Registers */ - dcr-reg = <040 020>; - sdr-base = <400>; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 90000000 0 08000000 - 01000000 0 00000000 e0000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x00 to 0x3f */ - bus-range = <00 3f>; + bus-range = <0x0 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -263,12 +265,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index b5d87895fe06..f87fe7b9ced9 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -10,6 +10,8 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { model = "41K7339"; compatible = "ibm,holly"; @@ -21,22 +23,22 @@ #size-cells =<0>; PowerPC,750CL@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <8000>; - i-cache-size = <8000>; - d-cache-sets = <80>; - i-cache-sets = <80>; - timebase-frequency = <2faf080>; - clock-frequency = <23c34600>; - bus-frequency = <bebc200>; + reg = <0x00000000>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + d-cache-sets = <128>; + i-cache-sets = <128>; + timebase-frequency = <50000000>; + clock-frequency = <600000000>; + bus-frequency = <200000000>; }; }; memory@0 { device_type = "memory"; - reg = <00000000 20000000>; + reg = <0x00000000 0x20000000>; }; tsi109@c0000000 { @@ -44,33 +46,33 @@ compatible = "tsi109-bridge", "tsi108-bridge"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 c0000000 00010000>; - reg = <c0000000 00010000>; + ranges = <0x00000000 0xc0000000 0x00010000>; + reg = <0xc0000000 0x00010000>; i2c@7000 { device_type = "i2c"; compatible = "tsi109-i2c", "tsi108-i2c"; interrupt-parent = <&MPIC>; - interrupts = <e 2>; - reg = <7000 400>; + interrupts = <0xe 0x2>; + reg = <0x00007000 0x00000400>; }; MDIO: mdio@6000 { device_type = "mdio"; compatible = "tsi109-mdio", "tsi108-mdio"; - reg = <6000 50>; + reg = <0x00006000 0x00000050>; #address-cells = <1>; #size-cells = <0>; PHY1: ethernet-phy@1 { compatible = "bcm5461a"; - reg = <1>; + reg = <0x00000001>; txc-rxc-delay-disable; }; PHY2: ethernet-phy@2 { compatible = "bcm5461a"; - reg = <2>; + reg = <0x00000002>; txc-rxc-delay-disable; }; }; @@ -80,10 +82,10 @@ compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; - reg = <6000 200>; + reg = <0x00006000 0x00000200>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupt-parent = <&MPIC>; - interrupts = <10 2>; + interrupts = <0x10 0x2>; mdio-handle = <&MDIO>; phy-handle = <&PHY1>; }; @@ -93,10 +95,10 @@ compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; - reg = <6400 200>; + reg = <0x00006400 0x00000200>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupt-parent = <&MPIC>; - interrupts = <11 2>; + interrupts = <0x11 0x2>; mdio-handle = <&MDIO>; phy-handle = <&PHY2>; }; @@ -104,23 +106,23 @@ serial@7808 { device_type = "serial"; compatible = "ns16550"; - reg = <7808 200>; - virtual-reg = <c0007808>; - clock-frequency = <3F9C6000>; - current-speed = <1c200>; + reg = <0x00007808 0x00000200>; + virtual-reg = <0xc0007808>; + clock-frequency = <1067212800>; + current-speed = <115200>; interrupt-parent = <&MPIC>; - interrupts = <c 2>; + interrupts = <0xc 0x2>; }; serial@7c08 { device_type = "serial"; compatible = "ns16550"; - reg = <7c08 200>; - virtual-reg = <c0007c08>; - clock-frequency = <3F9C6000>; - current-speed = <1c200>; + reg = <0x00007c08 0x00000200>; + virtual-reg = <0xc0007c08>; + clock-frequency = <1067212800>; + current-speed = <115200>; interrupt-parent = <&MPIC>; - interrupts = <d 2>; + interrupts = <0xd 0x2>; }; MPIC: pic@7400 { @@ -128,7 +130,7 @@ compatible = "chrp,open-pic"; interrupt-controller; #interrupt-cells = <2>; - reg = <7400 400>; + reg = <0x00007400 0x00000400>; big-endian; }; @@ -138,42 +140,42 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <1000 1000>; - bus-range = <0 0>; + reg = <0x00001000 0x00001000>; + bus-range = <0x0 0x0>; /*----------------------------------------------------+ | PCI memory range. | 01 denotes I/O space | 02 denotes 32-bit memory space +----------------------------------------------------*/ - ranges = <02000000 0 40000000 40000000 0 10000000 - 01000000 0 00000000 7e000000 0 00010000>; - clock-frequency = <7f28154>; + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; interrupt-parent = <&MPIC>; - interrupts = <17 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; /*----------------------------------------------------+ | The INTA, INTB, INTC, INTD are shared. +----------------------------------------------------*/ interrupt-map = < - 0800 0 0 1 &RT0 24 0 - 0800 0 0 2 &RT0 25 0 - 0800 0 0 3 &RT0 26 0 - 0800 0 0 4 &RT0 27 0 - - 1000 0 0 1 &RT0 25 0 - 1000 0 0 2 &RT0 26 0 - 1000 0 0 3 &RT0 27 0 - 1000 0 0 4 &RT0 24 0 - - 1800 0 0 1 &RT0 26 0 - 1800 0 0 2 &RT0 27 0 - 1800 0 0 3 &RT0 24 0 - 1800 0 0 4 &RT0 25 0 - - 2000 0 0 1 &RT0 27 0 - 2000 0 0 2 &RT0 24 0 - 2000 0 0 3 &RT0 25 0 - 2000 0 0 4 &RT0 26 0 + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 >; RT0: router@1180 { @@ -183,7 +185,7 @@ clock-frequency = <0>; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <17 2>; + interrupts = <0x17 0x2>; interrupt-parent = <&MPIC>; }; }; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index cc2873a531d2..b94bf61b9bcc 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -12,12 +12,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,katmai"; compatible = "amcc,katmai"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -33,13 +35,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440SPe"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -47,14 +49,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,11 +66,11 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -76,11 +78,11 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <a 4 b 4>; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -88,22 +90,22 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440spe"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440spe"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -115,108 +117,108 @@ SDRAM0: sdram { compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <1>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC1 6 4 - /*RXEOB*/ 1 &UIC1 7 4 - /*SERR*/ 2 &UIC1 1 4 - /*TXDE*/ 3 &UIC1 2 4 - /*RXDE*/ 4 &UIC1 3 4>; + interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 + /*RXEOB*/ 0x1 &UIC1 0x7 0x4 + /*SERR*/ 0x2 &UIC1 0x1 0x4 + /*TXDE*/ 0x3 &UIC1 0x2 0x4 + /*RXDE*/ 0x4 &UIC1 0x3 0x4>; }; POB0: opb { compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; + ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@10000200 { device_type = "serial"; compatible = "ns16550"; - reg = <10000200 8>; - virtual-reg = <a0000200>; + reg = <0x10000200 0x00000008>; + virtual-reg = <0xa0000200>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@10000300 { device_type = "serial"; compatible = "ns16550"; - reg = <10000300 8>; - virtual-reg = <a0000300>; + reg = <0x10000300 0x00000008>; + virtual-reg = <0xa0000300>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@10000600 { device_type = "serial"; compatible = "ns16550"; - reg = <10000600 8>; - virtual-reg = <a0000600>; + reg = <0x10000600 0x00000008>; + virtual-reg = <0xa0000600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <5 4>; + interrupts = <0x5 0x4>; }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <10000400 14>; + reg = <0x10000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@10000500 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <10000500 14>; + reg = <0x10000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; EMAC0: ethernet@10000800 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-440spe", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <10000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x10000800 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "gmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; has-inverted-stacr-oc; has-new-stacr-staopc; }; @@ -231,23 +233,23 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <c 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - c 0ed00000 4 /* Special cycles */ - c 0ec80000 100 /* Internal registers */ - c 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0xf */ - bus-range = <0 f>; + bus-range = <0x0 0xf>; /* * On Katmai, the following PCI-X interrupts signals @@ -258,13 +260,13 @@ * INTC: J2: 1-2 * INTD: J1: 1-2 */ - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 1 &UIC1 14 8 - 0800 0 0 2 &UIC1 13 8 - 0800 0 0 3 &UIC1 12 8 - 0800 0 0 4 &UIC1 11 8 + 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8 + 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8 + 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8 + 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8 >; }; @@ -275,23 +277,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <d 00000000 20000000 /* Config space access */ - c 10000000 00001000>; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <10 1f>; + bus-range = <0x10 0x1f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -301,12 +303,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -316,23 +318,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = <d 20000000 20000000 /* Config space access */ - c 10001000 00001000>; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <20 2f>; + bus-range = <0x20 0x2f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -342,12 +344,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; }; PCIE2: pciex@d40000000 { @@ -357,23 +359,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <2>; /* port number */ - reg = <d 40000000 20000000 /* Config space access */ - c 10002000 00001000>; /* Registers */ - dcr-reg = <140 020>; - sdr-base = <370>; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 - 01000000 0 00000000 0000000f 80020000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <30 3f>; + bus-range = <0x30 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -383,12 +385,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; }; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 48c9a6e71f1a..3ed6a8fee1d5 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "amcc,kilauea"; compatible = "amcc,kilauea"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405EX"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; /* 16 kB */ - d-cache-size = <4000>; /* 16 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller { compatible = "ibm,uic-405ex", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -60,11 +62,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -72,11 +74,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -89,72 +91,72 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405ex"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-405ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <80000000 80000000 10000000 - ef600000 ef600000 a00000 - f0000000 f0000000 10000000>; - dcr-reg = <0a0 5>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 200000>; + reg = <0x00000000 0x00200000>; }; partition@200000 { label = "root"; - reg = <200000 200000>; + reg = <0x00200000 0x00200000>; }; partition@400000 { label = "user"; - reg = <400000 3b60000>; + reg = <0x00400000 0x03b60000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -162,68 +164,68 @@ UART0: serial@ef600200 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600200 8>; - virtual-reg = <ef600200>; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; + interrupts = <0x1a 0x4>; }; UART1: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@ef600400 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <ef600400 14>; + reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600500 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <ef600500 14>; + reg = <0xef600500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <ef600b00 104>; + reg = <0xef600b00 0x00000104>; has-mdio; }; EMAC0: ethernet@ef600900 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 18 4 - /*Wake*/ 1 &UIC1 1d 4>; - reg = <ef600900 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -231,27 +233,27 @@ }; EMAC1: ethernet@ef600a00 { - linux,network-index = <1>; + linux,network-index = <0x1>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 19 4 - /*Wake*/ 1 &UIC1 1f 4>; - reg = <ef600a00 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; has-inverted-stacr-oc; @@ -266,23 +268,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <a0000000 20000000 /* Config space access */ - ef000000 00001000>; /* Registers */ - dcr-reg = <040 020>; - sdr-base = <400>; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 90000000 0 08000000 - 01000000 0 00000000 e0000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x00 to 0x3f */ - bus-range = <00 3f>; + bus-range = <0x0 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -292,12 +294,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@0c0000000 { @@ -307,23 +309,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = <c0000000 20000000 /* Config space access */ - ef001000 00001000>; /* Registers */ - dcr-reg = <060 020>; - sdr-base = <440>; + port = <0x1>; /* port number */ + reg = <0xc0000000 0x20000000 /* Config space access */ + 0xef001000 0x00001000>; /* Registers */ + dcr-reg = <0x060 0x020>; + sdr-base = <0x440>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 98000000 0 08000000 - 01000000 0 00000000 e0010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -333,12 +335,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 84cc5e72ddd8..1dfcd7ed199c 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "amcc,makalu"; compatible = "amcc,makalu"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405EX"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; /* 16 kB */ - d-cache-size = <4000>; /* 16 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller { compatible = "ibm,uic-405ex", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -60,11 +62,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -72,11 +74,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -89,72 +91,72 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405ex"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-405ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <80000000 80000000 10000000 - ef600000 ef600000 a00000 - f0000000 f0000000 10000000>; - dcr-reg = <0a0 5>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 200000>; + reg = <0x00000000 0x00200000>; }; partition@200000 { label = "root"; - reg = <200000 200000>; + reg = <0x00200000 0x00200000>; }; partition@400000 { label = "user"; - reg = <400000 3b60000>; + reg = <0x00400000 0x03b60000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -162,68 +164,68 @@ UART0: serial@ef600200 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600200 8>; - virtual-reg = <ef600200>; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; + interrupts = <0x1a 0x4>; }; UART1: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@ef600400 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <ef600400 14>; + reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600500 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <ef600500 14>; + reg = <0xef600500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <ef600b00 104>; + reg = <0xef600b00 0x00000104>; has-mdio; }; EMAC0: ethernet@ef600900 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 18 4 - /*Wake*/ 1 &UIC1 1d 4>; - reg = <ef600900 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <0000003f>; /* Start at 6 */ + phy-map = <0x0000003f>; /* Start at 6 */ rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -231,27 +233,27 @@ }; EMAC1: ethernet@ef600a00 { - linux,network-index = <1>; + linux,network-index = <0x1>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 19 4 - /*Wake*/ 1 &UIC1 1f 4>; - reg = <ef600a00 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; has-inverted-stacr-oc; @@ -266,23 +268,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = <a0000000 20000000 /* Config space access */ - ef000000 00001000>; /* Registers */ - dcr-reg = <040 020>; - sdr-base = <400>; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 90000000 0 08000000 - 01000000 0 00000000 e0000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x00 to 0x3f */ - bus-range = <00 3f>; + bus-range = <0x0 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -292,12 +294,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@0c0000000 { @@ -307,23 +309,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = <c0000000 20000000 /* Config space access */ - ef001000 00001000>; /* Registers */ - dcr-reg = <060 020>; - sdr-base = <440>; + port = <0x1>; /* port number */ + reg = <0xc0000000 0x20000000 /* Config space access */ + 0xef001000 0x00001000>; /* Registers */ + dcr-reg = <0x060 0x020>; + sdr-base = <0x440>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 98000000 0 08000000 - 01000000 0 00000000 e0010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -333,12 +335,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts index 379ded282d5e..96ba5b512afe 100644 --- a/arch/powerpc/boot/dts/ps3.dts +++ b/arch/powerpc/boot/dts/ps3.dts @@ -18,6 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/dts-v1/; + / { model = "SonyPS3"; compatible = "sony,ps3"; @@ -34,7 +36,7 @@ memory { device_type = "memory"; - reg = <0 0 0 0>; + reg = <0x00000000 0x00000000 0x00000000 0x00000000>; }; /* @@ -55,14 +57,14 @@ cpu@0 { device_type = "cpu"; - reg = <0>; - ibm,ppc-interrupt-server#s = <0 1>; + reg = <0x00000000>; + ibm,ppc-interrupt-server#s = <0x0 0x1>; clock-frequency = <0>; timebase-frequency = <0>; - i-cache-size = <8000>; - d-cache-size = <8000>; - i-cache-line-size = <80>; - d-cache-line-size = <80>; + i-cache-size = <32768>; + d-cache-size = <32768>; + i-cache-line-size = <128>; + d-cache-line-size = <128>; }; }; }; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index 6a8fa7089ea2..2cd87f66f81f 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -12,12 +12,14 @@ * */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,rainier"; compatible = "amcc,rainier"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -35,13 +37,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440GRx"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -49,14 +51,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440grx","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -66,11 +68,11 @@ compatible = "ibm,uic-440grx","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -78,22 +80,22 @@ compatible = "ibm,uic-440grx","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440grx", "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440grx", "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -105,80 +107,80 @@ SDRAM0: sdram { compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440grx", "ibm,dma-4xx"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440grx", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-440grx", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440grx", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Kernel"; - reg = <0 180000>; + reg = <0x00000000 0x00180000>; }; partition@180000 { label = "ramdisk"; - reg = <180000 200000>; + reg = <0x00180000 0x00200000>; }; partition@380000 { label = "file system"; - reg = <380000 3aa0000>; + reg = <0x00380000 0x03aa0000>; }; partition@3e20000 { label = "kozio"; - reg = <3e20000 140000>; + reg = <0x03e20000 0x00140000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; @@ -187,69 +189,69 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600500 8>; - virtual-reg = <ef600500>; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600600 8>; - virtual-reg = <ef600600>; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440grx", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440grx", "ibm,iic"; - reg = <ef600800 14>; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440grx", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601000 { compatible = "ibm,rgmii-440grx", "ibm,rgmii"; - reg = <ef601000 8>; + reg = <0xef601000 0x00000008>; has-mdio; }; @@ -257,23 +259,23 @@ device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 18 4 - /*Wake*/ 1 &UIC1 1d 4>; - reg = <ef600e00 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; rgmii-device = <&RGMII0>; @@ -286,23 +288,23 @@ device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 19 4 - /*Wake*/ 1 &UIC1 1f 4>; - reg = <ef600f00 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; rgmii-device = <&RGMII0>; @@ -319,24 +321,24 @@ #address-cells = <3>; compatible = "ibm,plb440grx-pci", "ibm,plb-pci"; primary; - reg = <1 eec00000 8 /* Config space access */ - 1 eed00000 4 /* IACK */ - 1 eed00000 4 /* Special cycle */ - 1 ef400000 40>; /* Internal registers */ + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 80000000 1 80000000 0 10000000 - 01000000 0 00000000 1 e8000000 0 00100000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00100000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* All PCI interrupts are routed to IRQ 67 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 72d67564bdfc..149dabc55217 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -12,12 +12,14 @@ * */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,sequoia"; compatible = "amcc,sequoia"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -35,13 +37,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EPx"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -49,14 +51,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -66,11 +68,11 @@ compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -78,22 +80,22 @@ compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -105,44 +107,44 @@ SDRAM0: sdram { compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440epx", "ibm,dma-4xx"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; USB1: usb@e0000400 { compatible = "ohci-be"; - reg = <0 e0000400 60>; + reg = <0x00000000 0xe0000400 0x00000060>; interrupt-parent = <&UIC0>; - interrupts = <15 8>; + interrupts = <0x15 0x8>; }; USB0: ehci@e0000300 { compatible = "ibm,usb-ehci-440epx", "usb-ehci"; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; - reg = <0 e0000300 90 0 e0000390 70>; + interrupts = <0x1a 0x4>; + reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>; big-endian; }; @@ -150,50 +152,50 @@ compatible = "ibm,opb-440epx", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440epx", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Kernel"; - reg = <0 180000>; + reg = <0x00000000 0x00180000>; }; partition@180000 { label = "ramdisk"; - reg = <180000 200000>; + reg = <0x00180000 0x00200000>; }; partition@380000 { label = "file system"; - reg = <380000 3aa0000>; + reg = <0x00380000 0x03aa0000>; }; partition@3e20000 { label = "kozio"; - reg = <3e20000 140000>; + reg = <0x03e20000 0x00140000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; @@ -202,69 +204,69 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600500 8>; - virtual-reg = <ef600500>; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600600 8>; - virtual-reg = <ef600600>; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440epx", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440epx", "ibm,iic"; - reg = <ef600800 14>; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440epx", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601000 { compatible = "ibm,rgmii-440epx", "ibm,rgmii"; - reg = <ef601000 8>; + reg = <0xef601000 0x00000008>; has-mdio; }; @@ -272,23 +274,23 @@ device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 18 4 - /*Wake*/ 1 &UIC1 1d 4>; - reg = <ef600e00 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; rgmii-device = <&RGMII0>; @@ -301,23 +303,23 @@ device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*Status*/ 0 &UIC0 19 4 - /*Wake*/ 1 &UIC1 1f 4>; - reg = <ef600f00 70>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; rgmii-device = <&RGMII0>; @@ -334,10 +336,10 @@ #address-cells = <3>; compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; primary; - reg = <1 eec00000 8 /* Config space access */ - 1 eed00000 4 /* IACK */ - 1 eed00000 4 /* Special cycle */ - 1 ef400000 40>; /* Internal registers */ + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second @@ -347,16 +349,16 @@ * I/O 1 E800 0000 1 E800 FFFF 64KB * I/O 1 E880 0000 1 EBFF FFFF 56MB */ - ranges = <02000000 0 80000000 1 80000000 0 40000000 - 01000000 0 00000000 1 e8000000 0 00010000 - 01000000 0 00000000 1 e8800000 0 03800000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* All PCI interrupts are routed to IRQ 67 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index e808e1c5593a..dcb749884b6d 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -10,12 +10,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,taishan"; compatible = "amcc,taishan"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC2; @@ -31,13 +33,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440GX"; - reg = <0>; - clock-frequency = <2FAF0800>; // 800MHz + reg = <0x00000000>; + clock-frequency = <800000000>; // 800MHz timebase-frequency = <0>; // Filled in by zImage - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <8000>; /* 32 kB */ - d-cache-size = <8000>; /* 32 kB */ + i-cache-line-size = <50>; + d-cache-line-size = <50>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -45,7 +47,7 @@ memory { device_type = "memory"; - reg = <0 0 0>; // Filled in by zImage + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage }; @@ -53,7 +55,7 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <200 009>; + dcr-reg = <0x200 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,11 +66,11 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <01 4 00 4>; /* cascade - first non-critical */ + interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */ interrupt-parent = <&UICB0>; }; @@ -77,11 +79,11 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <03 4 02 4>; /* cascade */ + interrupts = <0x3 0x4 0x2 0x4>; /* cascade */ interrupt-parent = <&UICB0>; }; @@ -89,29 +91,29 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <2>; /* was 1 */ - dcr-reg = <210 009>; + dcr-reg = <0x210 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <05 4 04 4>; /* cascade */ + interrupts = <0x5 0x4 0x4 0x4>; /* cascade */ interrupt-parent = <&UICB0>; }; CPC0: cpc { compatible = "ibm,cpc-440gp"; - dcr-reg = <0b0 003 0e0 010>; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; // FIXME: anything else? }; L2C0: l2c { compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; - dcr-reg = <20 8 /* Internal SRAM DCR's */ - 30 8>; /* L2 cache DCR's */ - cache-line-size = <20>; /* 32 bytes */ - cache-size = <40000>; /* L2, 256K */ + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ interrupt-parent = <&UIC2>; - interrupts = <17 1>; + interrupts = <0x17 0x1>; }; plb { @@ -119,41 +121,41 @@ #address-cells = <2>; #size-cells = <1>; ranges; - clock-frequency = <9896800>; // 160MHz + clock-frequency = <160000000>; // 160MHz SDRAM0: memory-controller { compatible = "ibm,sdram-440gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; // FIXME: anything else? }; SRAM0: sram { compatible = "ibm,sram-440gp"; - dcr-reg = <020 8 00a 1>; + dcr-reg = <0x020 0x008 0x00a 0x001>; }; DMA0: dma { // FIXME: ??? compatible = "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <4>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; - interrupt-map-mask = <ffffffff>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { @@ -162,26 +164,26 @@ #size-cells = <1>; /* Wish there was a nicer way of specifying a full 32-bit range */ - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; - dcr-reg = <090 00b>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; - clock-frequency = <4C4B400>; // 80MHz + interrupts = <0x7 0x4>; + clock-frequency = <80000000>; // 80MHz EBC0: ebc { compatible = "ibm,ebc-440gx", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; - clock-frequency = <4C4B400>; // 80MHz + clock-frequency = <80000000>; // 80MHz /* ranges property is supplied by zImage * based on firmware's configuration of the * EBC bridge */ - interrupts = <5 4>; + interrupts = <0x5 0x4>; interrupt-parent = <&UIC1>; /* TODO: Add other EBC devices */ @@ -192,103 +194,103 @@ UART0: serial@40000200 { device_type = "serial"; compatible = "ns16550"; - reg = <40000200 8>; - virtual-reg = <e0000200>; - clock-frequency = <A8C000>; - current-speed = <1C200>; /* 115200 */ + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@40000300 { device_type = "serial"; compatible = "ns16550"; - reg = <40000300 8>; - virtual-reg = <e0000300>; - clock-frequency = <A8C000>; - current-speed = <1C200>; /* 115200 */ + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@40000400 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000400 14>; + reg = <0x40000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@40000500 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000500 14>; + reg = <0x40000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; GPIO0: gpio@40000700 { /* FIXME */ compatible = "ibm,gpio-440gp"; - reg = <40000700 20>; + reg = <0x40000700 0x00000020>; }; ZMII0: emac-zmii@40000780 { compatible = "ibm,zmii-440gx", "ibm,zmii"; - reg = <40000780 c>; + reg = <0x40000780 0x0000000c>; }; RGMII0: emac-rgmii@40000790 { compatible = "ibm,rgmii"; - reg = <40000790 8>; + reg = <0x40000790 0x00000008>; }; TAH0: emac-tah@40000b50 { compatible = "ibm,tah-440gx", "ibm,tah"; - reg = <40000b50 30>; + reg = <0x40000b50 0x00000030>; }; TAH1: emac-tah@40000d50 { compatible = "ibm,tah-440gx", "ibm,tah"; - reg = <40000d50 30>; + reg = <0x40000d50 0x00000030>; }; EMAC0: ethernet@40000800 { - unused = <1>; + unused = <0x1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <40000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; EMAC1: ethernet@40000900 { - unused = <1>; + unused = <0x1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = <40000900 70>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; @@ -297,18 +299,18 @@ device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; - interrupts = <0 4 1 4>; - reg = <40000c00 70>; + interrupts = <0x0 0x4 0x1 0x4>; + reg = <0x40000c00 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <2>; mal-rx-channel = <2>; cell-index = <2>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; zmii-device = <&ZMII0>; @@ -321,18 +323,18 @@ device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; - interrupts = <2 4 3 4>; - reg = <40000e00 70>; + interrupts = <0x2 0x4 0x3 0x4>; + reg = <0x40000e00 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <3>; mal-rx-channel = <3>; cell-index = <3>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000003>; + phy-map = <0x00000003>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; zmii-device = <&ZMII0>; @@ -344,9 +346,9 @@ GPT0: gpt@40000a00 { /* FIXME */ - reg = <40000a00 d4>; + reg = <0x40000a00 0x000000d4>; interrupt-parent = <&UIC0>; - interrupts = <12 4 13 4 14 4 15 4 16 4>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; }; }; @@ -360,34 +362,34 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <2 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - 2 0ed00000 4 /* Special cycles */ - 2 0ec80000 100 /* Internal registers */ - 2 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x00000100 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 00000003 80000000 0 80000000 - 01000000 0 00000000 00000002 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 1 &UIC0 17 8 - 0800 0 0 2 &UIC0 18 8 - 0800 0 0 3 &UIC0 19 8 - 0800 0 0 4 &UIC0 1a 8 + 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8 + 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8 + 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8 + 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8 /* IDSEL 2 */ - 1000 0 0 1 &UIC0 18 8 - 1000 0 0 2 &UIC0 19 8 - 1000 0 0 3 &UIC0 1a 8 - 1000 0 0 4 &UIC0 17 8 + 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8 + 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8 + 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8 + 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index a328607c8f84..4a9f726ada13 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "ibm,walnut"; compatible = "ibm,walnut"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405GP"; - reg = <0>; - clock-frequency = <bebc200>; /* Filled in by zImage */ + reg = <0x00000000>; + clock-frequency = <200000000>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller { compatible = "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 9>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -65,63 +67,63 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL: mcmal { compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <1>; num-rx-chans = <1>; interrupt-parent = <&UIC0>; interrupts = < - b 4 /* TXEOB */ - c 4 /* RXEOB */ - a 4 /* SERR */ - d 4 /* TXDE */ - e 4 /* RXDE */>; + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; }; POB0: opb { compatible = "ibm,opb-405gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <ef600000 ef600000 a00000>; - dcr-reg = <0a0 5>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by zImage */ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC: i2c@ef600500 { compatible = "ibm,iic-405gp", "ibm,iic"; - reg = <ef600500 11>; + reg = <0xef600500 0x00000011>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; GPIO: gpio@ef600700 { compatible = "ibm,gpio-405gp"; - reg = <ef600700 20>; + reg = <0xef600700 0x00000020>; }; EMAC: ethernet@ef600800 { @@ -129,26 +131,26 @@ compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; interrupts = < - f 4 /* Ethernet */ - 9 4 /* Ethernet Wake Up */>; + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <ef600800 70>; + reg = <0xef600800 0x00000070>; mal-device = <&MAL>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; }; }; EBC0: ebc { compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; /* The ranges property is supplied by the bootwrapper @@ -158,18 +160,18 @@ clock-frequency = <0>; /* Filled in by zImage */ sram@0,0 { - reg = <0 0 80000>; + reg = <0x00000000 0x00000000 0x00080000>; }; flash@0,80000 { compatible = "jedec-flash"; bank-width = <1>; - reg = <0 80000 80000>; + reg = <0x00000000 0x00080000 0x00080000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "OpenBIOS"; - reg = <0 80000>; + reg = <0x00000000 0x00080000>; read-only; }; }; @@ -177,24 +179,24 @@ nvram@1,0 { /* NVRAM and RTC */ compatible = "ds1743-nvram"; - #bytes = <2000>; - reg = <1 0 2000>; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; }; keyboard@2,0 { compatible = "intel,82C42PC"; - reg = <2 0 2>; + reg = <0x00000002 0x00000000 0x00000002>; }; ir@3,0 { compatible = "ti,TIR2000PAG"; - reg = <3 0 10>; + reg = <0x00000003 0x00000000 0x00000010>; }; fpga@7,0 { compatible = "Walnut-FPGA"; - reg = <7 0 10>; - virtual-reg = <f0300005>; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xf0300005>; }; }; @@ -205,35 +207,35 @@ #address-cells = <3>; compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; primary; - reg = <eec00000 8 /* Config space access */ - eed80000 4 /* IACK */ - eed80000 4 /* Special cycle */ - ef480000 40>; /* Internal registers */ + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* Walnut has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = <f800 0 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 1c 8 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 1d 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 1e 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 1f 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index b04a52e22bf5..c52e4fb89abf 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "pika,warp"; compatible = "pika,warp"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -28,13 +30,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -42,14 +44,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -59,22 +61,22 @@ compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -86,86 +88,86 @@ SDRAM0: sdram { compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440ep", "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; }; POB0: opb { compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 0 00000000 80000000 - 80000000 0 80000000 80000000>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; fpga@2,0 { compatible = "pika,fpga"; - reg = <2 0 2200>; - interrupts = <18 8>; + reg = <0x00000002 0x00000000 0x00002200>; + interrupts = <0x18 0x8>; interrupt-parent = <&UIC0>; }; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 0 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 180000>; + reg = <0x00000000 0x00180000>; }; partition@180000 { label = "root"; - reg = <180000 3480000>; + reg = <0x00180000 0x03480000>; }; partition@3600000 { label = "user"; - reg = <3600000 900000>; + reg = <0x03600000 0x00900000>; }; partition@3f00000 { label = "fpga"; - reg = <3f00000 40000>; + reg = <0x03f00000 0x00040000>; }; partition@3f40000 { label = "env"; - reg = <3f40000 40000>; + reg = <0x03f40000 0x00040000>; }; partition@3f80000 { label = "u-boot"; - reg = <3f80000 80000>; + reg = <0x03f80000 0x00080000>; }; }; }; @@ -173,60 +175,60 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; GPIO0: gpio@ef600b00 { compatible = "ibm,gpio-440ep"; - reg = <ef600b00 48>; + reg = <0xef600b00 0x00000048>; }; GPIO1: gpio@ef600c00 { compatible = "ibm,gpio-440ep"; - reg = <ef600c00 48>; + reg = <0xef600c00 0x00000048>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <ef600e00 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; usb@ef601000 { compatible = "ohci-be"; - reg = <ef601000 80>; - interrupts = <8 1 9 1>; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; interrupt-parent = < &UIC1 >; }; }; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts index 0d6d332814e0..e39422aa0d85 100644 --- a/arch/powerpc/boot/dts/yosemite.dts +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,yosemite"; compatible = "amcc,yosemite","amcc,bamboo"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -32,13 +34,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -46,14 +48,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -63,22 +65,22 @@ compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -90,29 +92,29 @@ SDRAM0: sdram { compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440ep", "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 - /*RXEOB*/ 1 &UIC0 b 4 - /*SERR*/ 2 &UIC1 0 4 - /*TXDE*/ 3 &UIC1 1 4 - /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; }; POB0: opb { @@ -122,110 +124,110 @@ /* Bamboo is oddball in the 44x world and doesn't use the ERPN * bits. */ - ranges = <00000000 0 00000000 80000000 - 80000000 0 80000000 80000000>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600300 8>; - virtual-reg = <ef600300>; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600400 8>; - virtual-reg = <ef600400>; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600500 8>; - virtual-reg = <ef600500>; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; status = "disabled"; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = <ef600600 8>; - virtual-reg = <ef600600>; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; status = "disabled"; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = <ef600700 14>; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = <ef600800 14>; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; spi@ef600900 { compatible = "amcc,spi-440ep"; - reg = <ef600900 6>; - interrupts = <8 4>; + reg = <0xef600900 0x00000006>; + interrupts = <0x8 0x4>; interrupt-parent = <&UIC0>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; - reg = <ef600d00 c>; + reg = <0xef600d00 0x0000000c>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <ef600e00 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; @@ -234,26 +236,26 @@ device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = <ef600f00 70>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <2 3>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; usb@ef601000 { compatible = "ohci-be"; - reg = <ef601000 80>; - interrupts = <8 4 9 4>; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x4 0x9 0x4>; interrupt-parent = < &UIC1 >; }; }; @@ -265,35 +267,35 @@ #address-cells = <3>; compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; primary; - reg = <0 eec00000 8 /* Config space access */ - 0 eed00000 4 /* IACK */ - 0 eed00000 4 /* Special cycle */ - 0 ef400000 40>; /* Internal registers */ + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 a0000000 0 a0000000 0 20000000 - 01000000 0 00000000 0 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* Bamboo has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = <f800 0 0 0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 1c 8 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 1b 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 1a 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 19 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 >; }; }; |