powerpc: Move l2cr.S over to arch/powerpc

No functional changes, but call it l2cr_6xx.S since it is specific
to 6xx-family (including G3/750 and G4/74xx) processors.

Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 2 insertions, 473 deletions

diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 1b2c7458a3d0..3d50a2686839 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,7 @@ extra-y				+= vmlinux.lds
 obj-y				:= entry.o traps.o time.o misc.o \
 					setup.o \
 					ppc_htab.o
-obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
+obj-$(CONFIG_6xx)		+= cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
@@ -34,7 +34,7 @@ endif
 # These are here while we do the architecture merge
 
 else
-obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
+obj-$(CONFIG_6xx)		+= cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S
deleted file mode 100644
index d7f4e982b539..000000000000
--- a/arch/ppc/kernel/l2cr.S
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
-	L2CR functions
-	Copyright © 1997-1998 by PowerLogix R & D, Inc.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/*
-	Thur, Dec. 12, 1998.
-	- First public release, contributed by PowerLogix.
-	***********
-	Sat, Aug. 7, 1999.
-	- Terry: Made sure code disabled interrupts before running. (Previously
-			it was assumed interrupts were already disabled).
-	- Terry: Updated for tentative G4 support.  4MB of memory is now flushed
-			instead of 2MB.  (Prob. only 3 is necessary).
-	- Terry: Updated for workaround to HID0[DPM] processor bug
-			during global invalidates.
-	***********
-	Thu, July 13, 2000.
-	- Terry: Added isync to correct for an errata.
-
-	22 August 2001.
-	- DanM: Finally added the 7450 patch I've had for the past
-		several months.  The L2CR is similar, but I'm going
-		to assume the user of this functions knows what they
-		are doing.
-
-	Author:	Terry Greeniaus (tgree@phys.ualberta.ca)
-	Please e-mail updates to this file to me, thanks!
-*/
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/cache.h>
-#include <asm/page.h>
-
-/* Usage:
-
-	When setting the L2CR register, you must do a few special
-	things.  If you are enabling the cache, you must perform a
-	global invalidate.  If you are disabling the cache, you must
-	flush the cache contents first.  This routine takes care of
-	doing these things.  When first enabling the cache, make sure
-	you pass in the L2CR you want, as well as passing in the
-	global invalidate bit set.  A global invalidate will only be
-	performed if the L2I bit is set in applyThis.  When enabling
-	the cache, you should also set the L2E bit in applyThis.  If
-	you want to modify the L2CR contents after the cache has been
-	enabled, the recommended procedure is to first call
-	__setL2CR(0) to disable the cache and then call it again with
-	the new values for L2CR.  Examples:
-
-	_setL2CR(0)		- disables the cache
-	_setL2CR(0xB3A04000)	- enables my G3 upgrade card:
-				- L2E set to turn on the cache
-				- L2SIZ set to 1MB
-				- L2CLK set to 1:1
-				- L2RAM set to pipelined synchronous late-write
-				- L2I set to perform a global invalidation
-				- L2OH set to 0.5 nS
-				- L2DF set because this upgrade card
-				  requires it
-
-	A similar call should work for your card.  You need to know
-	the correct setting for your card and then place them in the
-	fields I have outlined above.  Other fields support optional
-	features, such as L2DO which caches only data, or L2TS which
-	causes cache pushes from the L1 cache to go to the L2 cache
-	instead of to main memory.
-
-IMPORTANT:
-	Starting with the 7450, the bits in this register have moved
-	or behave differently.  The Enable, Parity Enable, Size,
-	and L2 Invalidate are the only bits that have not moved.
-	The size is read-only for these processors with internal L2
-	cache, and the invalidate is a control as well as status.
-		-- Dan
-
-*/
-/*
- * Summary: this procedure ignores the L2I bit in the value passed in,
- * flushes the cache if it was already enabled, always invalidates the
- * cache, then enables the cache if the L2E bit is set in the value
- * passed in.
- *   -- paulus.
- */
-_GLOBAL(_set_L2CR)
-	/* Make sure this is a 750 or 7400 chip */
-BEGIN_FTR_SECTION
-	li	r3,-1
-	blr
-END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
-
-	mflr	r9
-
-	/* Stop DST streams */
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-
-	/* Turn off interrupts and data relocation. */
-	mfmsr	r7		/* Save MSR in r7 */
-	rlwinm	r4,r7,0,17,15
-	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
-	sync
-	mtmsr	r4
-	isync
-
-	/* Before we perform the global invalidation, we must disable dynamic
-	 * power management via HID0[DPM] to work around a processor bug where
-	 * DPM can possibly interfere with the state machine in the processor
-	 * that invalidates the L2 cache tags.
-	 */
-	mfspr	r8,SPRN_HID0		/* Save HID0 in r8 */
-	rlwinm	r4,r8,0,12,10		/* Turn off HID0[DPM] */
-	sync
-	mtspr	SPRN_HID0,r4		/* Disable DPM */
-	sync
-
-	/* Get the current enable bit of the L2CR into r4 */
-	mfspr	r4,SPRN_L2CR
-
-	/* Tweak some bits */
-	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
-	rlwinm	r3,r3,0,11,9		/* Turn off the invalidate bit */
-	rlwinm	r3,r3,0,1,31		/* Turn off the enable bit */
-
-	/* Check to see if we need to flush */
-	rlwinm.	r4,r4,0,0,0
-	beq	2f
-
-	/* Flush the cache. First, read the first 4MB of memory (physical) to
-	 * put new data in the cache.  (Actually we only need
-	 * the size of the L2 cache plus the size of the L1 cache, but 4MB will
-	 * cover everything just to be safe).
-	 */
-
-	 /**** Might be a good idea to set L2DO here - to prevent instructions
-	       from getting into the cache.  But since we invalidate
-	       the next time we enable the cache it doesn't really matter.
-	       Don't do this unless you accomodate all processor variations.
-	       The bit moved on the 7450.....
-	  ****/
-
-BEGIN_FTR_SECTION
-	/* Disable L2 prefetch on some 745x and try to ensure
-	 * L2 prefetch engines are idle. As explained by errata
-	 * text, we can't be sure they are, we just hope very hard
-	 * that well be enough (sic !). At least I noticed Apple
-	 * doesn't even bother doing the dcbf's here...
-	 */
-	mfspr	r4,SPRN_MSSCR0
-	rlwinm	r4,r4,0,0,29
-	sync
-	mtspr	SPRN_MSSCR0,r4
-	sync
-	isync
-	lis	r4,KERNELBASE@h
-	dcbf	0,r4
-	dcbf	0,r4
-	dcbf	0,r4
-	dcbf	0,r4
-END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
-
-	/* TODO: use HW flush assist when available */
-
-	lis	r4,0x0002
-	mtctr	r4
-	li	r4,0
-1:
-	lwzx	r0,r0,r4
-	addi	r4,r4,32		/* Go to start of next cache line */
-	bdnz	1b
-	isync
-
-	/* Now, flush the first 4MB of memory */
-	lis	r4,0x0002
-	mtctr	r4
-	li	r4,0
-	sync
-1:
-	dcbf	0,r4
-	addi	r4,r4,32		/* Go to start of next cache line */
-	bdnz	1b
-
-2:
-	/* Set up the L2CR configuration bits (and switch L2 off) */
-	/* CPU errata: Make sure the mtspr below is already in the
-	 * L1 icache
-	 */
-	b	20f
-	.balign	L1_CACHE_BYTES
-22:
-	sync
-	mtspr	SPRN_L2CR,r3
-	sync
-	b	23f
-20:
-	b	21f
-21:	sync
-	isync
-	b	22b
-
-23:
-	/* Perform a global invalidation */
-	oris	r3,r3,0x0020
-	sync
-	mtspr	SPRN_L2CR,r3
-	sync
-	isync				/* For errata */
-
-BEGIN_FTR_SECTION
-	/* On the 7450, we wait for the L2I bit to clear......
-	*/
-10:	mfspr	r3,SPRN_L2CR
-	andis.	r4,r3,0x0020
-	bne	10b
-	b	11f
-END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
-
-	/* Wait for the invalidation to complete */
-3:	mfspr	r3,SPRN_L2CR
-	rlwinm.	r4,r3,0,31,31
-	bne	3b
-
-11:	rlwinm	r3,r3,0,11,9		/* Turn off the L2I bit */
-	sync
-	mtspr	SPRN_L2CR,r3
-	sync
-
-	/* See if we need to enable the cache */
-	cmplwi	r5,0
-	beq	4f
-
-	/* Enable the cache */
-	oris	r3,r3,0x8000
-	mtspr	SPRN_L2CR,r3
-	sync
-	
-	/* Enable L2 HW prefetch on 744x/745x */
-BEGIN_FTR_SECTION
-	mfspr	r3,SPRN_MSSCR0
-	ori	r3,r3,3
-	sync
-	mtspr	SPRN_MSSCR0,r3
-	sync
-	isync
-END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
-4:
-
-	/* Restore HID0[DPM] to whatever it was before */
-	sync
-	mtspr	1008,r8
-	sync
-
-	/* Restore MSR (restores EE and DR bits to original state) */
-	SYNC
-	mtmsr	r7
-	isync
-
-	mtlr	r9
-	blr
-
-_GLOBAL(_get_L2CR)
-	/* Return the L2CR contents */
-	li	r3,0
-BEGIN_FTR_SECTION
-	mfspr	r3,SPRN_L2CR
-END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
-	blr
-
-
-/*
- * Here is a similar routine for dealing with the L3 cache
- * on the 745x family of chips
- */
-
-_GLOBAL(_set_L3CR)
-	/* Make sure this is a 745x chip */
-BEGIN_FTR_SECTION
-	li	r3,-1
-	blr
-END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
-
-	/* Turn off interrupts and data relocation. */
-	mfmsr	r7		/* Save MSR in r7 */
-	rlwinm	r4,r7,0,17,15
-	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
-	sync
-	mtmsr	r4
-	isync
-
-	/* Stop DST streams */
-	DSSALL
-	sync
-
-	/* Get the current enable bit of the L3CR into r4 */
-	mfspr	r4,SPRN_L3CR
-
-	/* Tweak some bits */
-	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
-	rlwinm	r3,r3,0,22,20		/* Turn off the invalidate bit */
-	rlwinm	r3,r3,0,2,31		/* Turn off the enable & PE bits */
-	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
-	/* Check to see if we need to flush */
-	rlwinm.	r4,r4,0,0,0
-	beq	2f
-
-	/* Flush the cache.
-	 */
-
-	/* TODO: use HW flush assist */
-
-	lis	r4,0x0008
-	mtctr	r4
-	li	r4,0
-1:
-	lwzx	r0,r0,r4
-	dcbf	0,r4
-	addi	r4,r4,32		/* Go to start of next cache line */
-	bdnz	1b
-
-2:
-	/* Set up the L3CR configuration bits (and switch L3 off) */
-	sync
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	oris	r3,r3,L3CR_L3RES@h		/* Set reserved bit 5 */
-	mtspr	SPRN_L3CR,r3
-	sync
-	oris	r3,r3,L3CR_L3CLKEN@h		/* Set clken */
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	/* Wait for stabilize */
-	li	r0,256
-	mtctr	r0
-1:	bdnz	1b
-
-	/* Perform a global invalidation */
-	ori	r3,r3,0x0400
-	sync
-	mtspr	SPRN_L3CR,r3
-	sync
-	isync
-
-	/* We wait for the L3I bit to clear...... */
-10:	mfspr	r3,SPRN_L3CR
-	andi.	r4,r3,0x0400
-	bne	10b
-
-	/* Clear CLKEN */
-	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	/* Wait for stabilize */
-	li	r0,256
-	mtctr	r0
-1:	bdnz	1b
-
-	/* See if we need to enable the cache */
-	cmplwi	r5,0
-	beq	4f
-
-	/* Enable the cache */
-	oris	r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	/* Wait for stabilize */
-	li	r0,256
-	mtctr	r0
-1:	bdnz	1b
-
-	/* Restore MSR (restores EE and DR bits to original state) */
-4:	SYNC
-	mtmsr	r7
-	isync
-	blr
-
-_GLOBAL(_get_L3CR)
-	/* Return the L3CR contents */
-	li	r3,0
-BEGIN_FTR_SECTION
-	mfspr	r3,SPRN_L3CR
-END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
-	blr
-
-/* --- End of PowerLogix code ---
- */
-
-
-/* flush_disable_L1()	- Flush and disable L1 cache
- *
- * clobbers r0, r3, ctr, cr0
- * Must be called with interrupts disabled and MMU enabled.
- */
-_GLOBAL(__flush_disable_L1)
-	/* Stop pending alitvec streams and memory accesses */
-BEGIN_FTR_SECTION
-	DSSALL
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- 	sync
-
-	/* Load counter to 0x4000 cache lines (512k) and
-	 * load cache with datas
-	 */
-	li	r3,0x4000	/* 512kB / 32B */
-	mtctr	r3
-	lis	r3,KERNELBASE@h
-1:
-	lwz	r0,0(r3)
-	addi	r3,r3,0x0020	/* Go to start of next cache line */
-	bdnz	1b
-	isync
-	sync
-
-	/* Now flush those cache lines */
-	li	r3,0x4000	/* 512kB / 32B */
-	mtctr	r3
-	lis	r3,KERNELBASE@h
-1:
-	dcbf	0,r3
-	addi	r3,r3,0x0020	/* Go to start of next cache line */
-	bdnz	1b
-	sync
-
-	/* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */
-	mfspr	r3,SPRN_HID0
-	rlwinm	r3,r3,0,18,15
-	mtspr	SPRN_HID0,r3
-	sync
-	isync
- 	blr
-
-/* inval_enable_L1	- Invalidate and enable L1 cache
- *
- * Assumes L1 is already disabled and MSR:EE is off
- *
- * clobbers r3
- */
-_GLOBAL(__inval_enable_L1)
-	/* Enable and then Flash inval the instruction & data cache */
-	mfspr	r3,SPRN_HID0
-	ori	r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	xori	r3,r3, HID0_ICFI|HID0_DCI
-	mtspr	SPRN_HID0,r3
-	sync
-
- 	blr
-
-