Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

4 files changed, 13 insertions, 256 deletions

diff --git a/arch/s390/net/Makefile b/arch/s390/net/Makefile
index e2b85ffdbb0c..8cab6deb0403 100644
--- a/arch/s390/net/Makefile
+++ b/arch/s390/net/Makefile
@@ -2,5 +2,5 @@
 #
 # Arch-specific network modules
 #
-obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o
+obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
 obj-$(CONFIG_HAVE_PNETID) += pnet.o
diff --git a/arch/s390/net/bpf_jit.S b/arch/s390/net/bpf_jit.S
deleted file mode 100644
index 9f794869c1b0..000000000000
--- a/arch/s390/net/bpf_jit.S
+++ /dev/null
@@ -1,120 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * BPF Jit compiler for s390, help functions.
- *
- * Copyright IBM Corp. 2012,2015
- *
- * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
- *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/nospec-insn.h>
-#include "bpf_jit.h"
-
-/*
- * Calling convention:
- * registers %r7-%r10, %r11,%r13, and %r15 are call saved
- *
- * Input (64 bit):
- *   %r3 (%b2) = offset into skb data
- *   %r6 (%b5) = return address
- *   %r7 (%b6) = skb pointer
- *   %r12      = skb data pointer
- *
- * Output:
- *   %r14= %b0 = return value (read skb value)
- *
- * Work registers: %r2,%r4,%r5,%r14
- *
- * skb_copy_bits takes 4 parameters:
- *   %r2 = skb pointer
- *   %r3 = offset into skb data
- *   %r4 = pointer to temp buffer
- *   %r5 = length to copy
- *   Return value in %r2: 0 = ok
- *
- * bpf_internal_load_pointer_neg_helper takes 3 parameters:
- *   %r2 = skb pointer
- *   %r3 = offset into data
- *   %r4 = length to copy
- *   Return value in %r2: Pointer to data
- */
-
-#define SKF_MAX_NEG_OFF	-0x200000	/* SKF_LL_OFF from filter.h */
-
-/*
- * Load SIZE bytes from SKB
- */
-#define sk_load_common(NAME, SIZE, LOAD)				\
-ENTRY(sk_load_##NAME);							\
-	ltgr	%r3,%r3;		/* Is offset negative? */	\
-	jl	sk_load_##NAME##_slow_neg;				\
-ENTRY(sk_load_##NAME##_pos);						\
-	aghi	%r3,SIZE;		/* Offset + SIZE */		\
-	clg	%r3,STK_OFF_HLEN(%r15);	/* Offset + SIZE > hlen? */	\
-	jh	sk_load_##NAME##_slow;					\
-	LOAD	%r14,-SIZE(%r3,%r12);	/* Get data from skb */		\
-	B_EX	OFF_OK,%r6;		/* Return */			\
-									\
-sk_load_##NAME##_slow:;							\
-	lgr	%r2,%r7;		/* Arg1 = skb pointer */	\
-	aghi	%r3,-SIZE;		/* Arg2 = offset */		\
-	la	%r4,STK_OFF_TMP(%r15);	/* Arg3 = temp bufffer */	\
-	lghi	%r5,SIZE;		/* Arg4 = size */		\
-	brasl	%r14,skb_copy_bits;	/* Get data from skb */		\
-	LOAD	%r14,STK_OFF_TMP(%r15);	/* Load from temp bufffer */	\
-	ltgr	%r2,%r2;		/* Set cc to (%r2 != 0) */	\
-	BR_EX	%r6;			/* Return */
-
-sk_load_common(word, 4, llgf)	/* r14 = *(u32 *) (skb->data+offset) */
-sk_load_common(half, 2, llgh)	/* r14 = *(u16 *) (skb->data+offset) */
-
-	GEN_BR_THUNK %r6
-	GEN_B_THUNK OFF_OK,%r6
-
-/*
- * Load 1 byte from SKB (optimized version)
- */
-	/* r14 = *(u8 *) (skb->data+offset) */
-ENTRY(sk_load_byte)
-	ltgr	%r3,%r3			# Is offset negative?
-	jl	sk_load_byte_slow_neg
-ENTRY(sk_load_byte_pos)
-	clg	%r3,STK_OFF_HLEN(%r15)	# Offset >= hlen?
-	jnl	sk_load_byte_slow
-	llgc	%r14,0(%r3,%r12)	# Get byte from skb
-	B_EX	OFF_OK,%r6		# Return OK
-
-sk_load_byte_slow:
-	lgr	%r2,%r7			# Arg1 = skb pointer
-					# Arg2 = offset
-	la	%r4,STK_OFF_TMP(%r15)	# Arg3 = pointer to temp buffer
-	lghi	%r5,1			# Arg4 = size (1 byte)
-	brasl	%r14,skb_copy_bits	# Get data from skb
-	llgc	%r14,STK_OFF_TMP(%r15)	# Load result from temp buffer
-	ltgr	%r2,%r2			# Set cc to (%r2 != 0)
-	BR_EX	%r6			# Return cc
-
-#define sk_negative_common(NAME, SIZE, LOAD)				\
-sk_load_##NAME##_slow_neg:;						\
-	cgfi	%r3,SKF_MAX_NEG_OFF;					\
-	jl	bpf_error;						\
-	lgr	%r2,%r7;		/* Arg1 = skb pointer */	\
-					/* Arg2 = offset */		\
-	lghi	%r4,SIZE;		/* Arg3 = size */		\
-	brasl	%r14,bpf_internal_load_pointer_neg_helper;		\
-	ltgr	%r2,%r2;						\
-	jz	bpf_error;						\
-	LOAD	%r14,0(%r2);		/* Get data from pointer */	\
-	xr	%r3,%r3;		/* Set cc to zero */		\
-	BR_EX	%r6;			/* Return cc */
-
-sk_negative_common(word, 4, llgf)
-sk_negative_common(half, 2, llgh)
-sk_negative_common(byte, 1, llgc)
-
-bpf_error:
-# force a return 0 from jit handler
-	ltgr	%r15,%r15	# Set condition code
-	BR_EX	%r6
diff --git a/arch/s390/net/bpf_jit.h b/arch/s390/net/bpf_jit.h
index 5e1e5133132d..7822ea92e54a 100644
--- a/arch/s390/net/bpf_jit.h
+++ b/arch/s390/net/bpf_jit.h
@@ -16,9 +16,6 @@
 #include <linux/filter.h>
 #include <linux/types.h>
 
-extern u8 sk_load_word_pos[], sk_load_half_pos[], sk_load_byte_pos[];
-extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
-
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -36,15 +33,6 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
  *	      |		      |     |
  *	      |   BPF stack   |     |
  *	      |		      |     |
- *	      +---------------+     |
- *	      | 8 byte skbp   |     |
- * R15+176 -> +---------------+     |
- *	      | 8 byte hlen   |     |
- * R15+168 -> +---------------+     |
- *	      | 4 byte align  |     |
- *	      +---------------+     |
- *	      | 4 byte temp   |     |
- *	      | for bpf_jit.S |     |
  * R15+160 -> +---------------+     |
  *	      | new backchain |     |
  * R15+152 -> +---------------+     |
@@ -57,17 +45,11 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
  * The stack size used by the BPF program ("BPF stack" above) is passed
  * via "aux->stack_depth".
  */
-#define STK_SPACE_ADD (8 + 8 + 4 + 4 + 160)
+#define STK_SPACE_ADD	(160)
 #define STK_160_UNUSED	(160 - 12 * 8)
 #define STK_OFF		(STK_SPACE_ADD - STK_160_UNUSED)
-#define STK_OFF_TMP	160	/* Offset of tmp buffer on stack */
-#define STK_OFF_HLEN	168	/* Offset of SKB header length on stack */
-#define STK_OFF_SKBP	176	/* Offset of SKB pointer on stack */
 
 #define STK_OFF_R6	(160 - 11 * 8)	/* Offset of r6 on stack */
 #define STK_OFF_TCCNT	(160 - 12 * 8)	/* Offset of tail_call_cnt on stack */
 
-/* Offset to skip condition code check */
-#define OFF_OK		4
-
 #endif /* __ARCH_S390_NET_BPF_JIT_H */
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index dd2bcf0e7d00..d2db8acb1a55 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -51,23 +51,21 @@ struct bpf_jit {
 
 #define BPF_SIZE_MAX	0xffff	/* Max size for program (16 bit branches) */
 
-#define SEEN_SKB	1	/* skb access */
-#define SEEN_MEM	2	/* use mem[] for temporary storage */
-#define SEEN_RET0	4	/* ret0_ip points to a valid return 0 */
-#define SEEN_LITERAL	8	/* code uses literals */
-#define SEEN_FUNC	16	/* calls C functions */
-#define SEEN_TAIL_CALL	32	/* code uses tail calls */
-#define SEEN_REG_AX	64	/* code uses constant blinding */
-#define SEEN_STACK	(SEEN_FUNC | SEEN_MEM | SEEN_SKB)
+#define SEEN_MEM	(1 << 0)	/* use mem[] for temporary storage */
+#define SEEN_RET0	(1 << 1)	/* ret0_ip points to a valid return 0 */
+#define SEEN_LITERAL	(1 << 2)	/* code uses literals */
+#define SEEN_FUNC	(1 << 3)	/* calls C functions */
+#define SEEN_TAIL_CALL	(1 << 4)	/* code uses tail calls */
+#define SEEN_REG_AX	(1 << 5)	/* code uses constant blinding */
+#define SEEN_STACK	(SEEN_FUNC | SEEN_MEM)
 
 /*
  * s390 registers
  */
 #define REG_W0		(MAX_BPF_JIT_REG + 0)	/* Work register 1 (even) */
 #define REG_W1		(MAX_BPF_JIT_REG + 1)	/* Work register 2 (odd) */
-#define REG_SKB_DATA	(MAX_BPF_JIT_REG + 2)	/* SKB data register */
-#define REG_L		(MAX_BPF_JIT_REG + 3)	/* Literal pool register */
-#define REG_15		(MAX_BPF_JIT_REG + 4)	/* Register 15 */
+#define REG_L		(MAX_BPF_JIT_REG + 2)	/* Literal pool register */
+#define REG_15		(MAX_BPF_JIT_REG + 3)	/* Register 15 */
 #define REG_0		REG_W0			/* Register 0 */
 #define REG_1		REG_W1			/* Register 1 */
 #define REG_2		BPF_REG_1		/* Register 2 */
@@ -92,10 +90,8 @@ static const int reg2hex[] = {
 	[BPF_REG_9]	= 10,
 	/* BPF stack pointer */
 	[BPF_REG_FP]	= 13,
-	/* Register for blinding (shared with REG_SKB_DATA) */
+	/* Register for blinding */
 	[BPF_REG_AX]	= 12,
-	/* SKB data pointer */
-	[REG_SKB_DATA]	= 12,
 	/* Work registers for s390x backend */
 	[REG_W0]	= 0,
 	[REG_W1]	= 1,
@@ -402,27 +398,6 @@ static void save_restore_regs(struct bpf_jit *jit, int op, u32 stack_depth)
 }
 
 /*
- * For SKB access %b1 contains the SKB pointer. For "bpf_jit.S"
- * we store the SKB header length on the stack and the SKB data
- * pointer in REG_SKB_DATA if BPF_REG_AX is not used.
- */
-static void emit_load_skb_data_hlen(struct bpf_jit *jit)
-{
-	/* Header length: llgf %w1,<len>(%b1) */
-	EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_1,
-		      offsetof(struct sk_buff, len));
-	/* s %w1,<data_len>(%b1) */
-	EMIT4_DISP(0x5b000000, REG_W1, BPF_REG_1,
-		   offsetof(struct sk_buff, data_len));
-	/* stg %w1,ST_OFF_HLEN(%r0,%r15) */
-	EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, STK_OFF_HLEN);
-	if (!(jit->seen & SEEN_REG_AX))
-		/* lg %skb_data,data_off(%b1) */
-		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
-			      BPF_REG_1, offsetof(struct sk_buff, data));
-}
-
-/*
  * Emit function prologue
  *
  * Save registers and create stack frame if necessary.
@@ -462,12 +437,6 @@ static void bpf_jit_prologue(struct bpf_jit *jit, u32 stack_depth)
 			EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0,
 				      REG_15, 152);
 	}
-	if (jit->seen & SEEN_SKB) {
-		emit_load_skb_data_hlen(jit);
-		/* stg %b1,ST_OFF_SKBP(%r0,%r15) */
-		EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15,
-			      STK_OFF_SKBP);
-	}
 }
 
 /*
@@ -537,12 +506,12 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 {
 	struct bpf_insn *insn = &fp->insnsi[i];
 	int jmp_off, last, insn_count = 1;
-	unsigned int func_addr, mask;
 	u32 dst_reg = insn->dst_reg;
 	u32 src_reg = insn->src_reg;
 	u32 *addrs = jit->addrs;
 	s32 imm = insn->imm;
 	s16 off = insn->off;
+	unsigned int mask;
 
 	if (dst_reg == BPF_REG_AX || src_reg == BPF_REG_AX)
 		jit->seen |= SEEN_REG_AX;
@@ -1029,13 +998,6 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		}
 		/* lgr %b0,%r2: load return value into %b0 */
 		EMIT4(0xb9040000, BPF_REG_0, REG_2);
-		if ((jit->seen & SEEN_SKB) &&
-		    bpf_helper_changes_pkt_data((void *)func)) {
-			/* lg %b1,ST_OFF_SKBP(%r15) */
-			EMIT6_DISP_LH(0xe3000000, 0x0004, BPF_REG_1, REG_0,
-				      REG_15, STK_OFF_SKBP);
-			emit_load_skb_data_hlen(jit);
-		}
 		break;
 	}
 	case BPF_JMP | BPF_TAIL_CALL:
@@ -1235,73 +1197,6 @@ branch_oc:
 		jmp_off = addrs[i + off + 1] - (addrs[i + 1] - 4);
 		EMIT4_PCREL(0xa7040000 | mask << 8, jmp_off);
 		break;
-	/*
-	 * BPF_LD
-	 */
-	case BPF_LD | BPF_ABS | BPF_B: /* b0 = *(u8 *) (skb->data+imm) */
-	case BPF_LD | BPF_IND | BPF_B: /* b0 = *(u8 *) (skb->data+imm+src) */
-		if ((BPF_MODE(insn->code) == BPF_ABS) && (imm >= 0))
-			func_addr = __pa(sk_load_byte_pos);
-		else
-			func_addr = __pa(sk_load_byte);
-		goto call_fn;
-	case BPF_LD | BPF_ABS | BPF_H: /* b0 = *(u16 *) (skb->data+imm) */
-	case BPF_LD | BPF_IND | BPF_H: /* b0 = *(u16 *) (skb->data+imm+src) */
-		if ((BPF_MODE(insn->code) == BPF_ABS) && (imm >= 0))
-			func_addr = __pa(sk_load_half_pos);
-		else
-			func_addr = __pa(sk_load_half);
-		goto call_fn;
-	case BPF_LD | BPF_ABS | BPF_W: /* b0 = *(u32 *) (skb->data+imm) */
-	case BPF_LD | BPF_IND | BPF_W: /* b0 = *(u32 *) (skb->data+imm+src) */
-		if ((BPF_MODE(insn->code) == BPF_ABS) && (imm >= 0))
-			func_addr = __pa(sk_load_word_pos);
-		else
-			func_addr = __pa(sk_load_word);
-		goto call_fn;
-call_fn:
-		jit->seen |= SEEN_SKB | SEEN_RET0 | SEEN_FUNC;
-		REG_SET_SEEN(REG_14); /* Return address of possible func call */
-
-		/*
-		 * Implicit input:
-		 *  BPF_REG_6	 (R7) : skb pointer
-		 *  REG_SKB_DATA (R12): skb data pointer (if no BPF_REG_AX)
-		 *
-		 * Calculated input:
-		 *  BPF_REG_2	 (R3) : offset of byte(s) to fetch in skb
-		 *  BPF_REG_5	 (R6) : return address
-		 *
-		 * Output:
-		 *  BPF_REG_0	 (R14): data read from skb
-		 *
-		 * Scratch registers (BPF_REG_1-5)
-		 */
-
-		/* Call function: llilf %w1,func_addr  */
-		EMIT6_IMM(0xc00f0000, REG_W1, func_addr);
-
-		/* Offset: lgfi %b2,imm */
-		EMIT6_IMM(0xc0010000, BPF_REG_2, imm);
-		if (BPF_MODE(insn->code) == BPF_IND)
-			/* agfr %b2,%src (%src is s32 here) */
-			EMIT4(0xb9180000, BPF_REG_2, src_reg);
-
-		/* Reload REG_SKB_DATA if BPF_REG_AX is used */
-		if (jit->seen & SEEN_REG_AX)
-			/* lg %skb_data,data_off(%b6) */
-			EMIT6_DISP_LH(0xe3000000, 0x0004, REG_SKB_DATA, REG_0,
-				      BPF_REG_6, offsetof(struct sk_buff, data));
-		/* basr %b5,%w1 (%b5 is call saved) */
-		EMIT2(0x0d00, BPF_REG_5, REG_W1);
-
-		/*
-		 * Note: For fast access we jump directly after the
-		 * jnz instruction from bpf_jit.S
-		 */
-		/* jnz <ret0> */
-		EMIT4_PCREL(0xa7740000, jit->ret0_ip - jit->prg);
-		break;
 	default: /* too complex, give up */
 		pr_err("Unknown opcode %02x\n", insn->code);
 		return -1;