Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into next

1 files changed, 75 insertions, 53 deletions

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index cde7c0085ced..d12fe9ddf3da 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -310,14 +310,14 @@ static const struct fb_videomode ecovec_dvi_modes[] = {
 	},
 };
 
-static int ecovec24_set_brightness(void *board_data, int brightness)
+static int ecovec24_set_brightness(int brightness)
 {
 	gpio_set_value(GPIO_PTR1, brightness);
 
 	return 0;
 }
 
-static int ecovec24_get_brightness(void *board_data)
+static int ecovec24_get_brightness(void)
 {
 	return gpio_get_value(GPIO_PTR1);
 }
@@ -327,17 +327,15 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.interface_type = RGB18,
 		.chan = LCDC_CHAN_MAINLCD,
 		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_size_cfg = { /* 7.0 inch */
+		.panel_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
 		},
-		.board_cfg = {
-			.set_brightness = ecovec24_set_brightness,
-			.get_brightness = ecovec24_get_brightness,
-		},
 		.bl_info = {
 			.name = "sh_mobile_lcdc_bl",
 			.max_brightness = 1,
+			.set_brightness = ecovec24_set_brightness,
+			.get_brightness = ecovec24_get_brightness,
 		},
 	}
 };
@@ -524,11 +522,18 @@ static void sdhi0_set_pwr(struct platform_device *pdev, int state)
 	gpio_set_value(GPIO_PTB6, state);
 }
 
+static int sdhi0_get_cd(struct platform_device *pdev)
+{
+	return !gpio_get_value(GPIO_PTY7);
+}
+
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.set_pwr	= sdhi0_set_pwr,
-	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= sdhi0_get_cd,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -561,11 +566,18 @@ static void sdhi1_set_pwr(struct platform_device *pdev, int state)
 	gpio_set_value(GPIO_PTB7, state);
 }
 
+static int sdhi1_get_cd(struct platform_device *pdev)
+{
+	return !gpio_get_value(GPIO_PTW7);
+}
+
 static struct sh_mobile_sdhi_info sdhi1_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
-	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
 	.set_pwr	= sdhi1_set_pwr,
+	.get_cd		= sdhi1_get_cd,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -769,7 +781,9 @@ static struct platform_device camera_devices[] = {
 
 /* FSI */
 static struct sh_fsi_platform_info fsi_info = {
-	.portb_flags = SH_FSI_BRS_INV,
+	.port_b = {
+		.flags = SH_FSI_BRS_INV,
+	},
 };
 
 static struct resource fsi_resources[] = {
@@ -1001,6 +1015,7 @@ extern char ecovec24_sdram_leave_end;
 static int __init arch_setup(void)
 {
 	struct clk *clk;
+	bool cn12_enabled = false;
 
 	/* register board specific self-refresh code */
 	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
@@ -1116,8 +1131,8 @@ static int __init arch_setup(void)
 		/* DVI */
 		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
 		lcdc_info.ch[0].clock_divider		= 1;
-		lcdc_info.ch[0].lcd_cfg			= ecovec_dvi_modes;
-		lcdc_info.ch[0].num_cfg			= ARRAY_SIZE(ecovec_dvi_modes);
+		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
 
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
@@ -1125,8 +1140,8 @@ static int __init arch_setup(void)
 		/* Panel */
 		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
 		lcdc_info.ch[0].clock_divider		= 2;
-		lcdc_info.ch[0].lcd_cfg			= ecovec_lcd_modes;
-		lcdc_info.ch[0].num_cfg			= ARRAY_SIZE(ecovec_lcd_modes);
+		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
 
 		gpio_set_value(GPIO_PTR1, 1);
 
@@ -1201,9 +1216,13 @@ static int __init arch_setup(void)
 	gpio_direction_input(GPIO_PTR5);
 	gpio_direction_input(GPIO_PTR6);
 
+	/* SD-card slot CN11 */
+	/* Card-detect, used on CN11, either with SDHI0 or with SPI */
+	gpio_request(GPIO_PTY7, NULL);
+	gpio_direction_input(GPIO_PTY7);
+
 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
 	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
-	gpio_request(GPIO_FN_SDHI0CD,  NULL);
 	gpio_request(GPIO_FN_SDHI0WP,  NULL);
 	gpio_request(GPIO_FN_SDHI0CMD, NULL);
 	gpio_request(GPIO_FN_SDHI0CLK, NULL);
@@ -1213,23 +1232,6 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_SDHI0D0,  NULL);
 	gpio_request(GPIO_PTB6, NULL);
 	gpio_direction_output(GPIO_PTB6, 0);
-
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
-	gpio_request(GPIO_FN_SDHI1CD,  NULL);
-	gpio_request(GPIO_FN_SDHI1WP,  NULL);
-	gpio_request(GPIO_FN_SDHI1CMD, NULL);
-	gpio_request(GPIO_FN_SDHI1CLK, NULL);
-	gpio_request(GPIO_FN_SDHI1D3,  NULL);
-	gpio_request(GPIO_FN_SDHI1D2,  NULL);
-	gpio_request(GPIO_FN_SDHI1D1,  NULL);
-	gpio_request(GPIO_FN_SDHI1D0,  NULL);
-	gpio_request(GPIO_PTB7, NULL);
-	gpio_direction_output(GPIO_PTB7, 0);
-
-	/* I/O buffer drive ability is high for SDHI1 */
-	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
-#endif /* CONFIG_MMC_SH_MMCIF */
 #else
 	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
 	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1241,12 +1243,51 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
 	gpio_request(GPIO_PTY6, NULL); /* write protect */
 	gpio_direction_input(GPIO_PTY6);
-	gpio_request(GPIO_PTY7, NULL); /* card detect */
-	gpio_direction_input(GPIO_PTY7);
 
 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
 #endif
 
+	/* MMC/SD-card slot CN12 */
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	cn12_enabled = true;
+#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
+	gpio_request(GPIO_FN_SDHI1WP,  NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+	gpio_request(GPIO_FN_SDHI1D3,  NULL);
+	gpio_request(GPIO_FN_SDHI1D2,  NULL);
+	gpio_request(GPIO_FN_SDHI1D1,  NULL);
+	gpio_request(GPIO_FN_SDHI1D0,  NULL);
+	gpio_request(GPIO_PTB7, NULL);
+	gpio_direction_output(GPIO_PTB7, 0);
+
+	/* Card-detect, used on CN12 with SDHI1 */
+	gpio_request(GPIO_PTW7, NULL);
+	gpio_direction_input(GPIO_PTW7);
+
+	cn12_enabled = true;
+#endif
+
+	if (cn12_enabled)
+		/* I/O buffer drive ability is high for CN12 */
+		__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
+			     IODRIVEA);
+
 	/* enable Video */
 	gpio_request(GPIO_PTU2, NULL);
 	gpio_direction_output(GPIO_PTU2, 1);
@@ -1305,25 +1346,6 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_PTU5, NULL);
 	gpio_direction_output(GPIO_PTU5, 0);
 
-#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
-	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
-	gpio_request(GPIO_FN_MMC_D7, NULL);
-	gpio_request(GPIO_FN_MMC_D6, NULL);
-	gpio_request(GPIO_FN_MMC_D5, NULL);
-	gpio_request(GPIO_FN_MMC_D4, NULL);
-	gpio_request(GPIO_FN_MMC_D3, NULL);
-	gpio_request(GPIO_FN_MMC_D2, NULL);
-	gpio_request(GPIO_FN_MMC_D1, NULL);
-	gpio_request(GPIO_FN_MMC_D0, NULL);
-	gpio_request(GPIO_FN_MMC_CLK, NULL);
-	gpio_request(GPIO_FN_MMC_CMD, NULL);
-	gpio_request(GPIO_PTB7, NULL);
-	gpio_direction_output(GPIO_PTB7, 0);
-
-	/* I/O buffer drive ability is high for MMCIF */
-	__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
-#endif
-
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));