Merge branch 'linus' into sched/core

Conflicts:
	fs/proc/array.c

Merge reason: resolve conflict and queue up dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 732 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 000000000000..3b1ceb46fa54
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,732 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/sh_keysc.h>
+#include <asm/clock.h>
+#include <cpu/sh7724.h>
+
+/*
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
+ */
+
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = 0xA405012C, /* PTG */
+		.end    = 0xA405012E - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "boot loader",
+		.offset = 0,
+		.size = (5 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.ether_link_active_low = 1
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+/* USB0 host */
+void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/*
+ * USB1
+ *
+ * CN5 can use both host/function,
+ * and we can determine it by checking PTB[3]
+ *
+ * This time only USB1 host is supported.
+ */
+void usb1_port_power(int port, int power)
+{
+	if (!gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_ERR "USB1 function is not supported\n");
+		return;
+	}
+
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.lcd_cfg = {
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 63,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
+};
+
+/* I2C device */
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_host_device, /* USB1 host support */
+	&lcdc_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+};
+
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+#define MAC_LEN 6
+static void __init sh_eth_init(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	struct clk *eth_clk;
+	u8 mac[MAC_LEN];
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	eth_clk = clk_get(NULL, "eth0");
+	if (!eth_clk) {
+		pr_err("can not get eth0 clk\n");
+		return;
+	}
+
+	/* read MAC address frome EEPROM */
+	for (i = 0; i < MAC_LEN; i++) {
+		mac[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	/* clock enable */
+	clk_enable(eth_clk);
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl((mac[0] << 24) |
+		  (mac[1] << 16) |
+		  (mac[2] <<  8) |
+		  (mac[3] <<  0), SH_ETH_MAHR);
+	ctrl_outl((mac[4] <<  8) |
+		  (mac[5] <<  0), SH_ETH_MALR);
+
+	clk_put(eth_clk);
+}
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
+static int __init arch_setup(void)
+{
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
+	/* enable USB */
+	ctrl_outw(0x0000, 0xA4D80000);
+	ctrl_outw(0x0000, 0xA4D90000);
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	ctrl_outw(0x0600, 0xa40501d4);
+	ctrl_outw(0x0600, 0xa4050192);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTR1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTR1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	/* I/O buffer drive ability is low */
+	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1,
+		lcdc_info.ch[0].lcd_cfg.name		= "DVI";
+		lcdc_info.ch[0].lcd_cfg.xres		= 1280;
+		lcdc_info.ch[0].lcd_cfg.yres		= 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2,
+		lcdc_info.ch[0].lcd_cfg.name		= "Panel";
+		lcdc_info.ch[0].lcd_cfg.xres		= 800;
+		lcdc_info.ch[0].lcd_cfg.yres		= 480;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 70;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTR1, 1);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
+	}
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
+	/* enable I2C device */
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init();
+	return 0;
+}
+device_initcall(devices_setup);
+
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+};