Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 169 insertions, 0 deletions

diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
new file mode 100644
index 000000000000..69af80b93e3f
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -0,0 +1,169 @@
+/*
+ * arch/sh/pci/ops-dreamcast.c
+ *
+ * PCI operations for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
+ *	Dreamcast PCI: Supports SEGA Broadband Adaptor only.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+
+static struct resource gapspci_io_resource = {
+	.name	= "GAPSPCI IO",
+	.start	= GAPSPCI_BBA_CONFIG,
+	.end	= GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource gapspci_mem_resource = {
+	.name	= "GAPSPCI mem",
+	.start	= GAPSPCI_DMA_BASE,
+	.end	= GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct pci_ops gapspci_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+	{ &gapspci_pci_ops, &gapspci_io_resource,
+	  &gapspci_mem_resource, 0, 1 },
+	{ 0, }
+};
+
+/*
+ * The !gapspci_config_access case really shouldn't happen, ever, unless
+ * someone implicitly messes around with the last devfn value.. otherwise we
+ * only support a single device anyways, and if we didn't have a BBA, we
+ * wouldn't make it terribly far through the PCI setup anyways.
+ *
+ * Also, we could very easily support both Type 0 and Type 1 configurations
+ * here, but since it doesn't seem that there is any such implementation in
+ * existance, we don't bother.
+ *
+ * I suppose if someone actually gets around to ripping the chip out of
+ * the BBA and hanging some more devices off of it, then this might be
+ * something to take into consideration. However, due to the cost of the BBA,
+ * and the general lack of activity by DC hardware hackers, this doesn't seem
+ * likely to happen anytime soon.
+ */
+static int gapspci_config_access(unsigned char bus, unsigned int devfn)
+{
+	return (bus == 0) && (devfn == 0);
+}
+
+/*
+ * We can also actually read and write in b/w/l sizes! Thankfully this part
+ * was at least done right, and we don't have to do the stupid masking and
+ * shifting that we do on the 7751! Small wonders never cease to amaze.
+ */
+static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
+{
+	*val = 0xffffffff;
+
+	if (!gapspci_config_access(bus->number, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+		case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+		case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+		case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+	}	
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+	if (!gapspci_config_access(bus->number, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (size) {
+		case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+		case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+		case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+	}
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops gapspci_pci_ops = {
+	.read	= gapspci_read,
+	.write	= gapspci_write,
+};
+
+/*
+ * gapspci init
+ */
+
+int __init gapspci_init(void)
+{
+	char idbuf[16];
+	int i;
+
+	/*
+	 * FIXME: All of this wants documenting to some degree,
+	 * even some basic register definitions would be nice.
+	 *
+	 * I haven't seen anything this ugly since.. maple.
+	 */
+
+	for (i=0; i<16; i++)
+		idbuf[i] = inb(GAPSPCI_REGS+i);
+
+	if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
+		return -ENODEV;
+
+	outl(0x5a14a501, GAPSPCI_REGS+0x18);
+
+	for (i=0; i<1000000; i++)
+		;
+
+	if (inl(GAPSPCI_REGS+0x18) != 1)
+		return -EINVAL;
+
+	outl(0x01000000, GAPSPCI_REGS+0x20);
+	outl(0x01000000, GAPSPCI_REGS+0x24);
+
+	outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+	outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+
+	outl(1, GAPSPCI_REGS+0x14);
+	outl(1, GAPSPCI_REGS+0x34);
+
+	/* Setting Broadband Adapter */
+	outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+	outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+	outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+	outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+	outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+	outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+	outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+
+	return 0;
+}
+
+/* Haven't done anything here as yet */
+char * __devinit pcibios_setup(char *str)
+{
+	return str;
+}