Merge branch 'linus' into perfcounters/core

Conflicts:
	fs/exec.c
	include/linux/init_task.h

Simple context conflicts.

1 files changed, 0 insertions, 168 deletions

diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
deleted file mode 100644
index bea40339919b..000000000000
--- a/arch/sh/kernel/cf-enabler.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* $Id: cf-enabler.c,v 1.4 2004/02/22 22:44:36 kkojima Exp $
- *
- *  linux/drivers/block/cf-enabler.c
- *
- *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2000  Toshiharu Nozawa
- *  Copyright (C) 2001  A&D Co., Ltd.
- *
- *  Enable the CF configuration.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/*
- * You can connect Compact Flash directly to the bus of SuperH.
- * This is the enabler for that.
- *
- * SIM: How generic is this really? It looks pretty board, or at
- * least SH sub-type, specific to me.
- * I know it doesn't work on the Overdrive!
- */
-
-/*
- * 0xB8000000 : Attribute
- * 0xB8001000 : Common Memory
- * 0xBA000000 : I/O
- */
-#if defined(CONFIG_CPU_SH4)
-/* SH4 can't access PCMCIA interface through P2 area.
- * we must remap it with appropriate attribute bit of the page set.
- * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
-
-#if defined(CONFIG_CF_AREA6)
-#define slot_no 0
-#else
-#define slot_no 1
-#endif
-
-/* use this pointer to access to directly connected compact flash io area*/
-void *cf_io_base;
-
-static int __init allocate_cf_area(void)
-{
-	pgprot_t prot;
-	unsigned long paddrbase, psize;
-
-	/* open I/O area window */
-	paddrbase = virt_to_phys((void*)CONFIG_CF_BASE_ADDR);
-	psize = PAGE_SIZE;
-	prot = PAGE_KERNEL_PCC(slot_no, _PAGE_PCC_IO16);
-	cf_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
-	if (!cf_io_base) {
-		printk("allocate_cf_area : can't open CF I/O window!\n");
-		return -ENOMEM;
-	}
-/*	printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n",
-		paddrbase, psize, prot.pgprot, cf_io_base);*/
-
-	/* XXX : do we need attribute and common-memory area also? */
-
-	return 0;
-}
-#endif
-
-static int __init cf_init_default(void)
-{
-/* You must have enabled the card, and set the level interrupt
- * before reaching this point. Possibly in boot ROM or boot loader.
- */
-#if defined(CONFIG_CPU_SH4)
-	allocate_cf_area();
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <mach-se/mach/se.h>
-#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <mach-se/mach/se7722.h>
-#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <mach-se/mach/se7721.h>
-#endif
-
-/*
- * SolutionEngine Seriese
- *
- * about MS770xSE
- * 0xB8400000 : Common Memory
- * 0xB8500000 : Attribute
- * 0xB8600000 : I/O
- *
- * about MS7722SE
- * 0xB0400000 : Common Memory
- * 0xB0500000 : Attribute
- * 0xB0600000 : I/O
- */
-
-#if defined(CONFIG_SH_SOLUTION_ENGINE) || \
-    defined(CONFIG_SH_7722_SOLUTION_ENGINE) || \
-    defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-static int __init cf_init_se(void)
-{
-	if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
-		return 0;	/* Not detected */
-
-	if ((ctrl_inw(MRSHPC_CSR) & 0x0080) == 0) {
-		ctrl_outw(0x0674, MRSHPC_CPWCR); /* Card Vcc is 3.3v? */
-	} else {
-		ctrl_outw(0x0678, MRSHPC_CPWCR); /* Card Vcc is 5V */
-	}
-
-	/*
-	 *  PC-Card window open
-	 *  flag == COMMON/ATTRIBUTE/IO
-	 */
-	/* common window open */
-	ctrl_outw(0x8a84, MRSHPC_MW0CR1);
-	if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
-		/* common mode & bus width 16bit SWAP = 1*/
-		ctrl_outw(0x0b00, MRSHPC_MW0CR2);
-	else
-		/* common mode & bus width 16bit SWAP = 0*/
-		ctrl_outw(0x0300, MRSHPC_MW0CR2);
-
-	/* attribute window open */
-	ctrl_outw(0x8a85, MRSHPC_MW1CR1);
-	if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
-		/* attribute mode & bus width 16bit SWAP = 1*/
-		ctrl_outw(0x0a00, MRSHPC_MW1CR2);
-	else
-		/* attribute mode & bus width 16bit SWAP = 0*/
-		ctrl_outw(0x0200, MRSHPC_MW1CR2);
-
-	/* I/O window open */
-	ctrl_outw(0x8a86, MRSHPC_IOWCR1);
-	ctrl_outw(0x0008, MRSHPC_CDCR);	 /* I/O card mode */
-	if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
-		ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
-	else
-		ctrl_outw(0x0200, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0*/
-
-	ctrl_outw(0x2000, MRSHPC_ICR);
-	ctrl_outb(0x00, PA_MRSHPC_MW2 + 0x206);
-	ctrl_outb(0x42, PA_MRSHPC_MW2 + 0x200);
-	return 0;
-}
-#else
-static int __init cf_init_se(void)
-{
-	return -1;
-}
-#endif
-
-static int __init cf_init(void)
-{
-	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
-		return cf_init_se();
-
-	return cf_init_default();
-}
-
-__initcall (cf_init);