Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

16 files changed, 19 insertions, 19 deletions

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 12fec72fec5f..1553d56cf4e0 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -82,7 +82,7 @@ config SH_NO_BSS_INIT
 	help
 	  If running in painfully slow environments, such as an RTL
 	  simulation or from remote memory via SHdebug, where the memory
-	  can already be gauranteed to ber zeroed on boot, say Y.
+	  can already be guaranteed to ber zeroed on boot, say Y.
 
 	  For all other cases, say N. If this option seems perplexing, or
 	  you aren't sure, say N.
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 78cf2ab89d7a..f63d323f411f 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -51,7 +51,7 @@
  */
 #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
 
-/* Return the hardware event's bit positon within the EMR/ESR */
+/* Return the hardware event's bit position within the EMR/ESR */
 #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
 
 /*
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index fd4ff25f23b2..30ae2e4283f0 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -936,7 +936,7 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd)
 		return;
 	}
 
-	/* read MAC address frome EEPROM */
+	/* read MAC address from EEPROM */
 	for (i = 0; i < sizeof(pd->mac_addr); i++) {
 		pd->mac_addr[i] = mac_read(a, 0x10 + i);
 		msleep(10);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 4983a4d20355..5ede38c330d3 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -61,7 +61,7 @@
   #define SH7751_PCICONF3_BIST7      0x80000000  /* Bist Supported */
   #define SH7751_PCICONF3_BIST6      0x40000000  /* Bist Executing */
   #define SH7751_PCICONF3_BIST3_0    0x0F000000  /* Bist Passed */
-  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Funtion device */
+  #define SH7751_PCICONF3_HD7        0x00800000  /* Single Function device */
   #define SH7751_PCICONF3_HD6_0      0x007F0000  /* Configuration Layout */
   #define SH7751_PCICONF3_LAT        0x0000FF00  /* Latency Timer */
   #define SH7751_PCICONF3_CLS        0x000000FF  /* Cache Line Size */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index a09c77dd09db..194231cb5a70 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -84,7 +84,7 @@ int __devinit register_pci_controller(struct pci_channel *hose)
 	hose_tail = &hose->next;
 
 	/*
-	 * Do not panic here but later - this might hapen before console init.
+	 * Do not panic here but later - this might happen before console init.
 	 */
 	if (!hose->io_map_base) {
 		printk(KERN_WARNING
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index c4e0b3d472b9..822d6084195b 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -186,7 +186,7 @@ typedef struct page *pgtable_t;
 /*
  * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
  * happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * alignment to avoid traps. The kmalloc alignment is guaranteed by
  * virtue of L1_CACHE_BYTES, requiring this to only be special cased
  * for slab caches.
  */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index b799fe71114c..0bce3d81569e 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -167,7 +167,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x)
 #endif
 
 /*
- * Mask of bits that are to be preserved accross pgprot changes.
+ * Mask of bits that are to be preserved across pgprot changes.
  */
 #define _PAGE_CHG_MASK \
 	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index c48a9c3420da..95adc500cabc 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -9,7 +9,7 @@
  * struct.
  *
  * The same note as with the movli.l/movco.l pair applies here, as long
- * as the load is gauranteed to be inlined, nothing else will hook in to
+ * as the load is guaranteed to be inlined, nothing else will hook in to
  * r0 and we get the return value for free.
  *
  * NOTE: Due to the fact we require r0 encoding, care should be taken to
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index 5d9d4d5154be..6ce944e33e59 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -24,7 +24,7 @@
 #define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
 #define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
 #define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extension Pin Polarity control */
 #define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
 #define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
 #define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
@@ -89,7 +89,7 @@
 #define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
 #define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
 #define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
-#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extension Pin Polarity control */
 #define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
 #define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
 #define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
index 0a800157b826..e04f75eaa153 100644
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ b/arch/sh/include/mach-common/mach/r2d.h
@@ -18,18 +18,18 @@
 #define PA_DISPCTL	0xa4000008	/* Display Timing control */
 #define PA_SDMPOW	0xa400000a	/* SD Power control */
 #define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
-#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
+#define PA_PCICD	0xa400000e	/* PCI Extension detect control */
 #define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
 
 #define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
 #define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
 #define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
-#define PA_R2D1_EXTRST		0xa4000028	/* Extention Reset control */
+#define PA_R2D1_EXTRST		0xa4000028	/* Extension Reset control */
 #define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
 
 #define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
 #define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
-#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extention Reset control */
+#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extension Reset control */
 #define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
 #define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
 
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index dd0e0f211359..8f63a264a842 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -67,7 +67,7 @@ int __init __deprecated cpg_clk_init(void)
 }
 
 /*
- * Placeholder for compatability, until the lazy CPUs do this
+ * Placeholder for compatibility, until the lazy CPUs do this
  * on their own.
  */
 int __init __weak arch_clk_init(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 1656b8c91faf..beba32beb6d9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -648,7 +648,7 @@ static void __init sh7786_usb_setup(void)
 	 * The following settings are necessary
 	 * for using the USB modules.
 	 *
-	 * see "USB Inital Settings" for detail
+	 * see "USB Initial Settings" for detail
 	 */
 	__raw_writel(USBINITVAL1, USBINITREG1);
 	__raw_writel(USBINITVAL2, USBINITREG2);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 64ea0b165399..91971103b62b 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -183,7 +183,7 @@ asmlinkage void do_softirq(void)
 		);
 
 		/*
-		 * Shouldnt happen, we returned above if in_interrupt():
+		 * Shouldn't happen, we returned above if in_interrupt():
 		 */
 		WARN_ON_ONCE(softirq_count());
 	}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 4f267160c515..58bff45d1156 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -150,7 +150,7 @@ void __init check_for_initrd(void)
 	}
 
 	/*
-	 * If we got this far inspite of the boot loader's best efforts
+	 * If we got this far in spite of the boot loader's best efforts
 	 * to the contrary, assume we actually have a valid initrd and
 	 * fix up the root dev.
 	 */
diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S
index 2a62816d2ddd..49aeabeba2c2 100644
--- a/arch/sh/lib64/copy_user_memcpy.S
+++ b/arch/sh/lib64/copy_user_memcpy.S
@@ -27,7 +27,7 @@
 ! 2.: When there are two or three bytes in the last word of an 11-or-more
 !     bytes memory chunk to b copied, the rest of the word can be read
 !     without side effects.
-!     This could be easily changed by increasing the minumum size of
+!     This could be easily changed by increasing the minimum size of
 !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
 !     however, this would cost a few extra cyles on average.
 !     For SHmedia, the assumption is that any quadword can be read in its
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
index dd300c372ce1..5d682e0ee24f 100644
--- a/arch/sh/lib64/memcpy.S
+++ b/arch/sh/lib64/memcpy.S
@@ -29,7 +29,7 @@
 ! 2.: When there are two or three bytes in the last word of an 11-or-more
 !     bytes memory chunk to b copied, the rest of the word can be read
 !     without side effects.
-!     This could be easily changed by increasing the minumum size of
+!     This could be easily changed by increasing the minimum size of
 !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
 !     however, this would cost a few extra cyles on average.
 !     For SHmedia, the assumption is that any quadword can be read in its