summaryrefslogtreecommitdiffstats
path: root/arch/sh
diff options
context:
space:
mode:
authorRich Felker <dalias@libc.org>2016-01-23 01:45:41 +0100
committerRich Felker <dalias@libc.org>2016-03-17 20:46:11 +0100
commit7480e0aabd5f9e6c3e3b72ed206e89284e90f11f (patch)
treeafcdb346dbec13ea4be79f062e9f849caedceaae /arch/sh
parentsh: remove arch-specific localtimer and use generic one (diff)
downloadlinux-7480e0aabd5f9e6c3e3b72ed206e89284e90f11f.tar.xz
linux-7480e0aabd5f9e6c3e3b72ed206e89284e90f11f.zip
sh: add device tree support and generic board using device tree
Add a new pseudo-board, within the existing SH boards/machine-vectors framework, which does not represent any actual hardware but instead requires all hardware to be described by the device tree blob provided by the boot loader. Changes made are thus non-invasive and do not risk breaking support for legacy boards. New hardware, including the open-hardware J2 and associated SoC devices, will use device free from the outset. Legacy SH boards can transition to device tree once all their hardware has device tree bindings, driver support for device tree, and a dts file for the board. It is intented that, once all boards are supported in the new framework, the existing machine-vectors framework should be removed and the new device tree setup code integrated directly. Signed-off-by: Rich Felker <dalias@libc.org>
Diffstat (limited to 'arch/sh')
-rw-r--r--arch/sh/boards/Kconfig15
-rw-r--r--arch/sh/boards/Makefile2
-rw-r--r--arch/sh/boards/of-generic.c113
-rw-r--r--arch/sh/kernel/head_32.S13
-rw-r--r--arch/sh/kernel/setup.c27
5 files changed, 170 insertions, 0 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 89963d13f930..5e52d5362292 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -6,6 +6,21 @@ config SOLUTION_ENGINE
config SH_ALPHA_BOARD
bool
+config SH_DEVICE_TREE
+ bool "Board Described by Device Tree"
+ select OF
+ select OF_EARLY_FLATTREE
+ select CLKSRC_OF
+ select GENERIC_CALIBRATE_DELAY
+ help
+ Select Board Described by Device Tree to build a kernel that
+ does not hard-code any board-specific knowledge but instead uses
+ a device tree blob provided by the boot-loader. You must enable
+ drivers for any hardware you want to use separately. At this
+ time, only boards based on the open-hardware J-Core processors
+ have sufficient driver coverage to use this option; do not
+ select it if you are using original SuperH hardware.
+
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 975a0f64ff20..cea300362035 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -15,3 +15,5 @@ obj-$(CONFIG_SH_TITAN) += board-titan.o
obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o
obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o
obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o
+
+obj-$(CONFIG_SH_DEVICE_TREE) += of-generic.o
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
new file mode 100644
index 000000000000..71d890932151
--- /dev/null
+++ b/arch/sh/boards/of-generic.c
@@ -0,0 +1,113 @@
+/*
+ * SH generic board support, using device tree
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/of_iommu.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+
+static void noop(void)
+{
+}
+
+static int noopi(void)
+{
+ return 0;
+}
+
+static void __init sh_of_mem_reserve(void)
+{
+ early_init_fdt_reserve_self();
+ early_init_fdt_scan_reserved_mem();
+}
+
+static void __init sh_of_time_init(void)
+{
+ pr_info("SH generic board support: scanning for clocksource devices\n");
+ clocksource_probe();
+}
+
+static void __init sh_of_setup(char **cmdline_p)
+{
+ unflatten_device_tree();
+
+ board_time_init = sh_of_time_init;
+
+ sh_mv.mv_name = of_flat_dt_get_machine_name();
+ if (!sh_mv.mv_name)
+ sh_mv.mv_name = "Unknown SH model";
+
+ /* FIXME: register smp ops to use dt to find cpus, use
+ * cpu enable-method, and use irq controller's ipi
+ * functions. */
+}
+
+static int sh_of_irq_demux(int irq)
+{
+ /* FIXME: eventually this should not be used at all;
+ * the interrupt controller should set_handle_irq(). */
+ return irq;
+}
+
+static void __init sh_of_init_irq(void)
+{
+ pr_info("SH generic board support: scanning for interrupt controllers\n");
+ irqchip_init();
+}
+
+static int __init sh_of_clk_init(void)
+{
+#ifdef CONFIG_COMMON_CLK
+ /* Disabled pending move to COMMON_CLK framework. */
+ pr_info("SH generic board support: scanning for clk providers\n");
+ of_clk_init(NULL);
+#endif
+ return 0;
+}
+
+static struct sh_machine_vector __initmv sh_of_generic_mv = {
+ .mv_setup = sh_of_setup,
+ .mv_name = "devicetree", /* replaced by DT root's model */
+ .mv_irq_demux = sh_of_irq_demux,
+ .mv_init_irq = sh_of_init_irq,
+ .mv_clk_init = sh_of_clk_init,
+ .mv_mode_pins = noopi,
+ .mv_mem_init = noop,
+ .mv_mem_reserve = sh_of_mem_reserve,
+};
+
+struct sh_clk_ops;
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+}
+
+void __init plat_irq_setup(void)
+{
+}
+
+static int __init sh_of_device_init(void)
+{
+ pr_info("SH generic board support: populating platform devices\n");
+ if (of_have_populated_dt()) {
+ of_iommu_init();
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+ } else {
+ pr_crit("Device tree not populated\n");
+ }
+ return 0;
+}
+arch_initcall_sync(sh_of_device_init);
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 7db248936b60..974bc152cc84 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -66,6 +66,10 @@ ENTRY(_stext)
mov #0, r0
ldc r0, r6_bank
#endif
+
+#ifdef CONFIG_OF
+ mov r4, r12 ! Store device tree blob pointer in r12
+#endif
/*
* Prefetch if possible to reduce cache miss penalty.
@@ -314,6 +318,12 @@ ENTRY(_stext)
10:
#endif
+#ifdef CONFIG_OF
+ mov.l 8f, r0 ! Make flat device tree available early.
+ jsr @r0
+ mov r12, r4
+#endif
+
! Additional CPU initialization
mov.l 6f, r0
jsr @r0
@@ -339,6 +349,9 @@ ENTRY(stack_start)
5: .long start_kernel
6: .long cpu_init
7: .long init_thread_union
+#if defined(CONFIG_OF)
+8: .long sh_fdt_init
+#endif
#ifdef CONFIG_PMB
.LPMB_ADDR: .long PMB_ADDR
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index de19cfa768f2..efb60ce720a7 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -29,6 +29,8 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -172,6 +174,7 @@ disable:
#endif
}
+#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
void calibrate_delay(void)
{
struct clk *clk = clk_get(NULL, "cpu_clk");
@@ -187,6 +190,7 @@ void calibrate_delay(void)
(loops_per_jiffy/(5000/HZ)) % 100,
loops_per_jiffy);
}
+#endif
void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn)
@@ -238,6 +242,29 @@ void __init __weak plat_early_device_setup(void)
{
}
+#ifdef CONFIG_OF
+void __ref sh_fdt_init(phys_addr_t dt_phys)
+{
+ static int done = 0;
+ void *dt_virt;
+
+ /* Avoid calling an __init function on secondary cpus. */
+ if (done) return;
+
+ dt_virt = phys_to_virt(dt_phys);
+
+ if (!dt_virt || !early_init_dt_scan(dt_virt)) {
+ pr_crit("Error: invalid device tree blob"
+ " at physical address %p\n", (void *)dt_phys);
+
+ while (true)
+ cpu_relax();
+ }
+
+ done = 1;
+}
+#endif
+
void __init setup_arch(char **cmdline_p)
{
enable_mmu();