sparc, sparc64: use arch/sparc/include

The majority of this patch was created by the following script:

***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***

The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 191 insertions, 0 deletions

diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h
new file mode 100644
index 000000000000..ecb6e81786a6
--- /dev/null
+++ b/arch/sparc/include/asm/ross.h
@@ -0,0 +1,191 @@
+/*
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ *    disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ *     to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ *                 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE   0x00200000
+#define HYPERSPARC_SBENABLE   0x00100000
+#define HYPERSPARC_WBENABLE   0x00080000
+#define HYPERSPARC_MIDMASK    0x00078000
+#define HYPERSPARC_BMODE      0x00004000
+#define HYPERSPARC_ACENABLE   0x00002000
+#define HYPERSPARC_CSIZE      0x00001000
+#define HYPERSPARC_MRFLCT     0x00000800
+#define HYPERSPARC_CMODE      0x00000400
+#define HYPERSPARC_CENABLE    0x00000100
+#define HYPERSPARC_NFAULT     0x00000002
+#define HYPERSPARC_MENABLE    0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * |                                 | FTD | ICE |
+ * -----------------------------------------------
+ *  31                                  1     0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD:  If set to one flush instructions executed during an
+ *       instruction cache hit occurs, the corresponding line
+ *       for said cache-hit is invalidated.  If FTD is zero,
+ *       an unimplemented 'flush' trap will occur when any
+ *       flush is executed by the processor.
+ *
+ * ICE:  If set to one, the instruction cache is enabled.  If
+ *       zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
+ *
+ * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
+ *
+ *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
+ *
+ * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD     0x00000002
+#define HYPERSPARC_ICCR_ICE     0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+	unsigned int icreg;
+
+	__asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+			     "mov %%g1, %0\n\t"
+			     : "=r" (icreg)
+			     : /* no inputs */
+			     : "g1", "memory");
+
+	return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+	__asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+			     ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+			     "nop\n\t"
+			     "nop\n\t"
+			     "nop\n\t"
+			     : /* no outputs */
+			     : "r" (icreg)
+			     : "g1", "memory");
+
+	return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_IWHOLE)
+			     : "memory");
+	return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+	unsigned long addr;
+
+	for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+				     : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_USER)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+	unsigned long end;
+
+	page &= PAGE_MASK;
+	end = page + PAGE_SIZE;
+	while (page < end) {
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+				     : "memory");
+		page += vac_line_size;
+	}
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */