arch/tile: core support for Tilera 32-bit chips.

This change is the core kernel support for TILEPro and TILE64 chips.
No driver support (except the console driver) is included yet.

This includes the relevant Linux headers in asm/; the low-level
low-level "Tile architecture" headers in arch/, which are
shared with the hypervisor, etc., and are build-system agnostic;
and the relevant hypervisor headers in hv/.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 128 insertions, 0 deletions

diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
new file mode 100644
index 000000000000..b0c15da2d5d5
--- /dev/null
+++ b/arch/tile/include/asm/pci.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PCI_H
+#define _ASM_TILE_PCI_H
+
+#include <asm/pci-bridge.h>
+
+/*
+ * The hypervisor maps the entirety of CPA-space as bus addresses, so
+ * bus addresses are physical addresses.  The networking and block
+ * device layers use this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     1
+
+struct pci_controller *pci_bus_to_hose(int bus);
+unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
+int __init tile_pci_init(void);
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
+
+int __devinit _tile_cfg_read(struct pci_controller *hose,
+				    int bus,
+				    int slot,
+				    int function,
+				    int offset,
+				    int size,
+				    u32 *val);
+int __devinit _tile_cfg_write(struct pci_controller *hose,
+				     int bus,
+				     int slot,
+				     int function,
+				     int offset,
+				     int size,
+				     u32 val);
+
+/*
+ * These are used to to config reads and writes in the early stages of
+ * setup before the driver infrastructure has been set up enough to be
+ * able to do config reads and writes.
+ */
+#define early_cfg_read(where, size, value) \
+	_tile_cfg_read(controller, \
+		       current_bus, \
+		       pci_slot, \
+		       pci_fn, \
+		       where, \
+		       size, \
+		       value)
+
+#define early_cfg_write(where, size, value) \
+	_tile_cfg_write(controller, \
+		       current_bus, \
+		       pci_slot, \
+		       pci_fn, \
+		       where, \
+		       size, \
+		       value)
+
+
+
+#define PCICFG_BYTE	1
+#define PCICFG_WORD	2
+#define PCICFG_DWORD	4
+
+#define	TILE_NUM_PCIE	2
+
+#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
+
+/*
+ * This decides whether to display the domain number in /proc.
+ */
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1;
+}
+
+/*
+ * I/O space is currently not supported.
+ */
+
+#define TILE_PCIE_LOWER_IO		0x0
+#define TILE_PCIE_UPPER_IO		0x10000
+#define TILE_PCIE_PCIE_IO_SIZE		0x0000FFFF
+
+#define _PAGE_NO_CACHE		0
+#define _PAGE_GUARDED		0
+
+
+#define pcibios_assign_all_busses()    pci_assign_all_buses
+extern int pci_assign_all_buses;
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+#define PCIBIOS_MIN_MEM		0
+#define PCIBIOS_MIN_IO		TILE_PCIE_LOWER_IO
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+extern int blade_pci;
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
+
+#endif /* _ASM_TILE_PCI_H */