x86: Use {push,pop}{l,q}_cfi in more places

... plus additionally introduce {push,pop}f{l,q}_cfi. All in the
hope that the code becomes better readable this way (it gets
quite a bit smaller in any case).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
LKML-Reference: <4C7FBDA40200007800013FAF@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 98 insertions, 196 deletions

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index d9b950ee5590..9fb188d7bc76 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -115,8 +115,7 @@
 
  /* unfortunately push/pop can't be no-op */
 .macro PUSH_GS
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
 .endm
 .macro POP_GS pop=0
 	addl $(4 + \pop), %esp
@@ -140,14 +139,12 @@
 #else	/* CONFIG_X86_32_LAZY_GS */
 
 .macro PUSH_GS
-	pushl %gs
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %gs
 	/*CFI_REL_OFFSET gs, 0*/
 .endm
 
 .macro POP_GS pop=0
-98:	popl %gs
-	CFI_ADJUST_CFA_OFFSET -4
+98:	popl_cfi %gs
 	/*CFI_RESTORE gs*/
   .if \pop <> 0
 	add $\pop, %esp
@@ -195,35 +192,25 @@
 .macro SAVE_ALL
 	cld
 	PUSH_GS
-	pushl %fs
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %fs
 	/*CFI_REL_OFFSET fs, 0;*/
-	pushl %es
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %es
 	/*CFI_REL_OFFSET es, 0;*/
-	pushl %ds
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ds
 	/*CFI_REL_OFFSET ds, 0;*/
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	CFI_REL_OFFSET eax, 0
-	pushl %ebp
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ebp
 	CFI_REL_OFFSET ebp, 0
-	pushl %edi
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %edi
 	CFI_REL_OFFSET edi, 0
-	pushl %esi
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %esi
 	CFI_REL_OFFSET esi, 0
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %edx
 	CFI_REL_OFFSET edx, 0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ecx
 	CFI_REL_OFFSET ecx, 0
-	pushl %ebx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ebx
 	CFI_REL_OFFSET ebx, 0
 	movl $(__USER_DS), %edx
 	movl %edx, %ds
@@ -234,39 +221,29 @@
 .endm
 
 .macro RESTORE_INT_REGS
-	popl %ebx
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %ebx
 	CFI_RESTORE ebx
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %ecx
 	CFI_RESTORE ecx
-	popl %edx
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %edx
 	CFI_RESTORE edx
-	popl %esi
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %esi
 	CFI_RESTORE esi
-	popl %edi
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %edi
 	CFI_RESTORE edi
-	popl %ebp
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %ebp
 	CFI_RESTORE ebp
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %eax
 	CFI_RESTORE eax
 .endm
 
 .macro RESTORE_REGS pop=0
 	RESTORE_INT_REGS
-1:	popl %ds
-	CFI_ADJUST_CFA_OFFSET -4
+1:	popl_cfi %ds
 	/*CFI_RESTORE ds;*/
-2:	popl %es
-	CFI_ADJUST_CFA_OFFSET -4
+2:	popl_cfi %es
 	/*CFI_RESTORE es;*/
-3:	popl %fs
-	CFI_ADJUST_CFA_OFFSET -4
+3:	popl_cfi %fs
 	/*CFI_RESTORE fs;*/
 	POP_GS \pop
 .pushsection .fixup, "ax"
@@ -320,16 +297,12 @@
 
 ENTRY(ret_from_fork)
 	CFI_STARTPROC
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	call schedule_tail
 	GET_THREAD_INFO(%ebp)
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
-	pushl $0x0202			# Reset kernel eflags
-	CFI_ADJUST_CFA_OFFSET 4
-	popfl
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %eax
+	pushl_cfi $0x0202		# Reset kernel eflags
+	popfl_cfi
 	jmp syscall_exit
 	CFI_ENDPROC
 END(ret_from_fork)
@@ -409,29 +382,23 @@ sysenter_past_esp:
 	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
 	 * we immediately enable interrupts at that point anyway.
 	 */
-	pushl $(__USER_DS)
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $(__USER_DS)
 	/*CFI_REL_OFFSET ss, 0*/
-	pushl %ebp
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ebp
 	CFI_REL_OFFSET esp, 0
-	pushfl
+	pushfl_cfi
 	orl $X86_EFLAGS_IF, (%esp)
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $(__USER_CS)
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $(__USER_CS)
 	/*CFI_REL_OFFSET cs, 0*/
 	/*
 	 * Push current_thread_info()->sysenter_return to the stack.
 	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
 	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
 	 */
-	pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
 	CFI_REL_OFFSET eip, 0
 
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	SAVE_ALL
 	ENABLE_INTERRUPTS(CLBR_NONE)
 
@@ -486,8 +453,7 @@ sysenter_audit:
 	movl %eax,%edx			/* 2nd arg: syscall number */
 	movl $AUDIT_ARCH_I386,%eax	/* 1st arg: audit arch */
 	call audit_syscall_entry
-	pushl %ebx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ebx
 	movl PT_EAX(%esp),%eax		/* reload syscall number */
 	jmp sysenter_do_call
 
@@ -529,8 +495,7 @@ ENDPROC(ia32_sysenter_target)
 	# system call handler stub
 ENTRY(system_call)
 	RING0_INT_FRAME			# can't unwind into user space anyway
-	pushl %eax			# save orig_eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax			# save orig_eax
 	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 					# system call tracing in operation / emulation
@@ -566,7 +531,6 @@ restore_all_notrace:
 	je ldt_ss			# returning to user-space with LDT SS
 restore_nocheck:
 	RESTORE_REGS 4			# skip orig_eax/error_code
-	CFI_ADJUST_CFA_OFFSET -4
 irq_return:
 	INTERRUPT_RETURN
 .section .fixup,"ax"
@@ -619,10 +583,8 @@ ldt_ss:
 	shr $16, %edx
 	mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
 	mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
-	pushl $__ESPFIX_SS
-	CFI_ADJUST_CFA_OFFSET 4
-	push %eax			/* new kernel esp */
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $__ESPFIX_SS
+	pushl_cfi %eax			/* new kernel esp */
 	/* Disable interrupts, but do not irqtrace this section: we
 	 * will soon execute iret and the tracer was already set to
 	 * the irqstate after the iret */
@@ -666,11 +628,9 @@ work_notifysig:				# deal with pending signals and
 
 	ALIGN
 work_notifysig_v86:
-	pushl %ecx			# save ti_flags for do_notify_resume
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ecx			# save ti_flags for do_notify_resume
 	call save_v86_state		# %eax contains pt_regs pointer
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %ecx
 	movl %eax, %esp
 #else
 	movl %esp, %eax
@@ -803,10 +763,8 @@ ENDPROC(ptregs_clone)
 	mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
 	shl $16, %eax
 	addl %esp, %eax			/* the adjusted stack pointer */
-	pushl $__KERNEL_DS
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $__KERNEL_DS
+	pushl_cfi %eax
 	lss (%esp), %esp		/* switch to the normal stack segment */
 	CFI_ADJUST_CFA_OFFSET -8
 .endm
@@ -843,8 +801,7 @@ vector=FIRST_EXTERNAL_VECTOR
       .if vector <> FIRST_EXTERNAL_VECTOR
 	CFI_ADJUST_CFA_OFFSET -4
       .endif
-1:	pushl $(~vector+0x80)	/* Note: always in signed byte range */
-	CFI_ADJUST_CFA_OFFSET 4
+1:	pushl_cfi $(~vector+0x80)	/* Note: always in signed byte range */
       .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
 	jmp 2f
       .endif
@@ -884,8 +841,7 @@ ENDPROC(common_interrupt)
 #define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
 	RING0_INT_FRAME;		\
-	pushl $~(nr);			\
-	CFI_ADJUST_CFA_OFFSET 4;	\
+	pushl_cfi $~(nr);		\
 	SAVE_ALL;			\
 	TRACE_IRQS_OFF			\
 	movl %esp,%eax;			\
@@ -901,21 +857,18 @@ ENDPROC(name)
 
 ENTRY(coprocessor_error)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_coprocessor_error
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi $do_coprocessor_error
 	jmp error_code
 	CFI_ENDPROC
 END(coprocessor_error)
 
 ENTRY(simd_coprocessor_error)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
 #ifdef CONFIG_X86_INVD_BUG
 	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
-661:	pushl $do_general_protection
+661:	pushl_cfi $do_general_protection
 662:
 .section .altinstructions,"a"
 	.balign 4
@@ -930,19 +883,16 @@ ENTRY(simd_coprocessor_error)
 664:
 .previous
 #else
-	pushl $do_simd_coprocessor_error
+	pushl_cfi $do_simd_coprocessor_error
 #endif
-	CFI_ADJUST_CFA_OFFSET 4
 	jmp error_code
 	CFI_ENDPROC
 END(simd_coprocessor_error)
 
 ENTRY(device_not_available)
 	RING0_INT_FRAME
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_device_not_available
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $-1			# mark this as an int
+	pushl_cfi $do_device_not_available
 	jmp error_code
 	CFI_ENDPROC
 END(device_not_available)
@@ -964,82 +914,68 @@ END(native_irq_enable_sysexit)
 
 ENTRY(overflow)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_overflow
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi $do_overflow
 	jmp error_code
 	CFI_ENDPROC
 END(overflow)
 
 ENTRY(bounds)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_bounds
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi $do_bounds
 	jmp error_code
 	CFI_ENDPROC
 END(bounds)
 
 ENTRY(invalid_op)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_invalid_op
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi $do_invalid_op
 	jmp error_code
 	CFI_ENDPROC
 END(invalid_op)
 
 ENTRY(coprocessor_segment_overrun)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_coprocessor_segment_overrun
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi $do_coprocessor_segment_overrun
 	jmp error_code
 	CFI_ENDPROC
 END(coprocessor_segment_overrun)
 
 ENTRY(invalid_TSS)
 	RING0_EC_FRAME
-	pushl $do_invalid_TSS
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $do_invalid_TSS
 	jmp error_code
 	CFI_ENDPROC
 END(invalid_TSS)
 
 ENTRY(segment_not_present)
 	RING0_EC_FRAME
-	pushl $do_segment_not_present
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $do_segment_not_present
 	jmp error_code
 	CFI_ENDPROC
 END(segment_not_present)
 
 ENTRY(stack_segment)
 	RING0_EC_FRAME
-	pushl $do_stack_segment
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $do_stack_segment
 	jmp error_code
 	CFI_ENDPROC
 END(stack_segment)
 
 ENTRY(alignment_check)
 	RING0_EC_FRAME
-	pushl $do_alignment_check
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $do_alignment_check
 	jmp error_code
 	CFI_ENDPROC
 END(alignment_check)
 
 ENTRY(divide_error)
 	RING0_INT_FRAME
-	pushl $0			# no error code
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_divide_error
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0			# no error code
+	pushl_cfi $do_divide_error
 	jmp error_code
 	CFI_ENDPROC
 END(divide_error)
@@ -1047,10 +983,8 @@ END(divide_error)
 #ifdef CONFIG_X86_MCE
 ENTRY(machine_check)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl machine_check_vector
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi machine_check_vector
 	jmp error_code
 	CFI_ENDPROC
 END(machine_check)
@@ -1058,10 +992,8 @@ END(machine_check)
 
 ENTRY(spurious_interrupt_bug)
 	RING0_INT_FRAME
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $do_spurious_interrupt_bug
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
+	pushl_cfi $do_spurious_interrupt_bug
 	jmp error_code
 	CFI_ENDPROC
 END(spurious_interrupt_bug)
@@ -1092,8 +1024,7 @@ ENTRY(xen_sysenter_target)
 
 ENTRY(xen_hypervisor_callback)
 	CFI_STARTPROC
-	pushl $0
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $0
 	SAVE_ALL
 	TRACE_IRQS_OFF
 
@@ -1129,23 +1060,20 @@ ENDPROC(xen_hypervisor_callback)
 # We distinguish between categories by maintaining a status value in EAX.
 ENTRY(xen_failsafe_callback)
 	CFI_STARTPROC
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	movl $1,%eax
 1:	mov 4(%esp),%ds
 2:	mov 8(%esp),%es
 3:	mov 12(%esp),%fs
 4:	mov 16(%esp),%gs
 	testl %eax,%eax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %eax
 	lea 16(%esp),%esp
 	CFI_ADJUST_CFA_OFFSET -16
 	jz 5f
 	addl $16,%esp
 	jmp iret_exc		# EAX != 0 => Category 2 (Bad IRET)
-5:	pushl $0		# EAX == 0 => Category 1 (Bad segment)
-	CFI_ADJUST_CFA_OFFSET 4
+5:	pushl_cfi $0		# EAX == 0 => Category 1 (Bad segment)
 	SAVE_ALL
 	jmp ret_from_exception
 	CFI_ENDPROC
@@ -1295,40 +1223,29 @@ syscall_table_size=(.-sys_call_table)
 
 ENTRY(page_fault)
 	RING0_EC_FRAME
-	pushl $do_page_fault
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $do_page_fault
 	ALIGN
 error_code:
 	/* the function address is in %gs's slot on the stack */
-	pushl %fs
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %fs
 	/*CFI_REL_OFFSET fs, 0*/
-	pushl %es
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %es
 	/*CFI_REL_OFFSET es, 0*/
-	pushl %ds
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ds
 	/*CFI_REL_OFFSET ds, 0*/
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	CFI_REL_OFFSET eax, 0
-	pushl %ebp
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ebp
 	CFI_REL_OFFSET ebp, 0
-	pushl %edi
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %edi
 	CFI_REL_OFFSET edi, 0
-	pushl %esi
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %esi
 	CFI_REL_OFFSET esi, 0
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %edx
 	CFI_REL_OFFSET edx, 0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ecx
 	CFI_REL_OFFSET ecx, 0
-	pushl %ebx
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ebx
 	CFI_REL_OFFSET ebx, 0
 	cld
 	movl $(__KERNEL_PERCPU), %ecx
@@ -1370,12 +1287,9 @@ END(page_fault)
 	movl TSS_sysenter_sp0 + \offset(%esp), %esp
 	CFI_DEF_CFA esp, 0
 	CFI_UNDEFINED eip
-	pushfl
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $__KERNEL_CS
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl $sysenter_past_esp
-	CFI_ADJUST_CFA_OFFSET 4
+	pushfl_cfi
+	pushl_cfi $__KERNEL_CS
+	pushl_cfi $sysenter_past_esp
 	CFI_REL_OFFSET eip, 0
 .endm
 
@@ -1385,8 +1299,7 @@ ENTRY(debug)
 	jne debug_stack_correct
 	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
 debug_stack_correct:
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $-1			# mark this as an int
 	SAVE_ALL
 	TRACE_IRQS_OFF
 	xorl %edx,%edx			# error code 0
@@ -1406,32 +1319,27 @@ END(debug)
  */
 ENTRY(nmi)
 	RING0_INT_FRAME
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	movl %ss, %eax
 	cmpw $__ESPFIX_SS, %ax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %eax
 	je nmi_espfix_stack
 	cmpl $ia32_sysenter_target,(%esp)
 	je nmi_stack_fixup
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	movl %esp,%eax
 	/* Do not access memory above the end of our stack page,
 	 * it might not exist.
 	 */
 	andl $(THREAD_SIZE-1),%eax
 	cmpl $(THREAD_SIZE-20),%eax
-	popl %eax
-	CFI_ADJUST_CFA_OFFSET -4
+	popl_cfi %eax
 	jae nmi_stack_correct
 	cmpl $ia32_sysenter_target,12(%esp)
 	je nmi_debug_stack_check
 nmi_stack_correct:
 	/* We have a RING0_INT_FRAME here */
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	SAVE_ALL
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
@@ -1460,18 +1368,14 @@ nmi_espfix_stack:
 	 *
 	 * create the pointer to lss back
 	 */
-	pushl %ss
-	CFI_ADJUST_CFA_OFFSET 4
-	pushl %esp
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %ss
+	pushl_cfi %esp
 	addl $4, (%esp)
 	/* copy the iret frame of 12 bytes */
 	.rept 3
-	pushl 16(%esp)
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi 16(%esp)
 	.endr
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi %eax
 	SAVE_ALL
 	FIXUP_ESPFIX_STACK		# %eax == %esp
 	xorl %edx,%edx			# zero error code
@@ -1485,8 +1389,7 @@ END(nmi)
 
 ENTRY(int3)
 	RING0_INT_FRAME
-	pushl $-1			# mark this as an int
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $-1			# mark this as an int
 	SAVE_ALL
 	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
@@ -1498,8 +1401,7 @@ END(int3)
 
 ENTRY(general_protection)
 	RING0_EC_FRAME
-	pushl $do_general_protection
-	CFI_ADJUST_CFA_OFFSET 4
+	pushl_cfi $do_general_protection
 	jmp error_code
 	CFI_ENDPROC
 END(general_protection)