Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

54 files changed, 1843 insertions, 5050 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index febaf180621b..0f15af41bd80 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -22,7 +22,7 @@ KASAN_SANITIZE_dumpstack_$(BITS).o := n
 
 CFLAGS_irq.o := -I$(src)/../include/asm/trace
 
-obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
+obj-y			:= process_$(BITS).o signal.o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time.o ioport.o ldt.o dumpstack.o nmi.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o jump_label.o
@@ -31,9 +31,6 @@ obj-y			+= probe_roms.o
 obj-$(CONFIG_X86_32)	+= i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= mcount_64.o
-obj-y			+= syscall_$(BITS).o vsyscall_gtod.o
-obj-$(CONFIG_IA32_EMULATION)	+= syscall_32.o
-obj-$(CONFIG_X86_VSYSCALL_EMULATION)	+= vsyscall_64.o vsyscall_emu_64.o
 obj-$(CONFIG_X86_ESPFIX64)	+= espfix_64.o
 obj-$(CONFIG_SYSFS)	+= ksysfs.o
 obj-y			+= bootflag.o e820.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index dbe76a14c3c9..e49ee24da85e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -31,12 +31,12 @@
 #include <linux/module.h>
 #include <linux/dmi.h>
 #include <linux/irq.h>
-#include <linux/irqdomain.h>
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 
+#include <asm/irqdomain.h>
 #include <asm/pci_x86.h>
 #include <asm/pgtable.h>
 #include <asm/io_apic.h>
@@ -400,57 +400,13 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
 	return 0;
 }
 
-static int mp_register_gsi(struct device *dev, u32 gsi, int trigger,
-			   int polarity)
-{
-	int irq, node;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-
-	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
-	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
-	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
-	if (mp_set_gsi_attr(gsi, trigger, polarity, node)) {
-		pr_warn("Failed to set pin attr for GSI%d\n", gsi);
-		return -1;
-	}
-
-	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC);
-	if (irq < 0)
-		return irq;
-
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (enable_update_mptable && acpi_gbl_FADT.sci_interrupt != gsi)
-		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
-
-	return irq;
-}
-
-static void mp_unregister_gsi(u32 gsi)
-{
-	int irq;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return;
-
-	irq = mp_map_gsi_to_irq(gsi, 0);
-	if (irq > 0)
-		mp_unmap_irq(irq);
-}
-
-static struct irq_domain_ops acpi_irqdomain_ops = {
-	.map = mp_irqdomain_map,
-	.unmap = mp_irqdomain_unmap,
-};
-
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
 	struct acpi_madt_io_apic *ioapic = NULL;
 	struct ioapic_domain_cfg cfg = {
 		.type = IOAPIC_DOMAIN_DYNAMIC,
-		.ops = &acpi_irqdomain_ops,
+		.ops = &mp_ioapic_irqdomain_ops,
 	};
 
 	ioapic = (struct acpi_madt_io_apic *)header;
@@ -652,7 +608,7 @@ static int acpi_register_gsi_pic(struct device *dev, u32 gsi,
 	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
 	 */
 	if (trigger == ACPI_LEVEL_SENSITIVE)
-		eisa_set_level_irq(gsi);
+		elcr_set_level_irq(gsi);
 #endif
 
 	return gsi;
@@ -663,10 +619,21 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 				    int trigger, int polarity)
 {
 	int irq = gsi;
-
 #ifdef CONFIG_X86_IO_APIC
+	int node;
+	struct irq_alloc_info info;
+
+	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
+	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
+	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
+	ioapic_set_alloc_attr(&info, node, trigger, polarity);
+
 	mutex_lock(&acpi_ioapic_lock);
-	irq = mp_register_gsi(dev, gsi, trigger, polarity);
+	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (irq >= 0 && enable_update_mptable &&
+	    acpi_gbl_FADT.sci_interrupt != gsi)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
 	mutex_unlock(&acpi_ioapic_lock);
 #endif
 
@@ -676,8 +643,12 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 static void acpi_unregister_gsi_ioapic(u32 gsi)
 {
 #ifdef CONFIG_X86_IO_APIC
+	int irq;
+
 	mutex_lock(&acpi_ioapic_lock);
-	mp_unregister_gsi(gsi);
+	irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+	if (irq > 0)
+		mp_unmap_irq(irq);
 	mutex_unlock(&acpi_ioapic_lock);
 #endif
 }
@@ -786,7 +757,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 	u64 addr;
 	struct ioapic_domain_cfg cfg = {
 		.type = IOAPIC_DOMAIN_DYNAMIC,
-		.ops = &acpi_irqdomain_ops,
+		.ops = &mp_ioapic_irqdomain_ops,
 	};
 
 	ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr);
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index ae693b51ed8e..8c35df468104 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -62,7 +62,7 @@ ENTRY(do_suspend_lowlevel)
 	pushfq
 	popq	pt_regs_flags(%rax)
 
-	movq	$resume_point, saved_rip(%rip)
+	movq	$.Lresume_point, saved_rip(%rip)
 
 	movq	%rsp, saved_rsp
 	movq	%rbp, saved_rbp
@@ -75,10 +75,10 @@ ENTRY(do_suspend_lowlevel)
 	xorl	%eax, %eax
 	call	x86_acpi_enter_sleep_state
 	/* in case something went wrong, restore the machine status and go on */
-	jmp	resume_point
+	jmp	.Lresume_point
 
 	.align 4
-resume_point:
+.Lresume_point:
 	/* We don't restore %rax, it must be 0 anyway */
 	movq	$saved_context, %rax
 	movq	saved_context_cr4(%rax), %rbx
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 7fe097235376..c42827eb86cf 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -231,6 +231,15 @@ void __init arch_init_ideal_nops(void)
 #endif
 		}
 		break;
+
+	case X86_VENDOR_AMD:
+		if (boot_cpu_data.x86 > 0xf) {
+			ideal_nops = p6_nops;
+			return;
+		}
+
+		/* fall through */
+
 	default:
 #ifdef CONFIG_X86_64
 		ideal_nops = k8_nops;
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 6a7c23ff21d3..ede92c3364d3 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -171,10 +171,6 @@ static int __init apbt_clockevent_register(void)
 
 static void apbt_setup_irq(struct apbt_dev *adev)
 {
-	/* timer0 irq has been setup early */
-	if (adev->irq == 0)
-		return;
-
 	irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
 	irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
 }
diff --git a/arch/x86/kernel/apic/htirq.c b/arch/x86/kernel/apic/htirq.c
index 816f36e979ad..ae50d3454d78 100644
--- a/arch/x86/kernel/apic/htirq.c
+++ b/arch/x86/kernel/apic/htirq.c
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
  *	Moved from arch/x86/kernel/apic/io_apic.c.
+ * Jiang Liu <jiang.liu@linux.intel.com>
+ *	Add support of hierarchical irqdomain
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,78 +16,112 @@
 #include <linux/device.h>
 #include <linux/pci.h>
 #include <linux/htirq.h>
+#include <asm/irqdomain.h>
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
 #include <asm/hypertransport.h>
 
+static struct irq_domain *htirq_domain;
+
 /*
  * Hypertransport interrupt support
  */
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	struct ht_irq_msg msg;
-
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
 static int
 ht_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	unsigned int dest;
+	struct irq_data *parent = data->parent_data;
 	int ret;
 
-	ret = apic_set_affinity(data, mask, &dest);
-	if (ret)
-		return ret;
-
-	target_ht_irq(data->irq, dest, cfg->vector);
-	return IRQ_SET_MASK_OK_NOCOPY;
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	if (ret >= 0) {
+		struct ht_irq_msg msg;
+		struct irq_cfg *cfg = irqd_cfg(data);
+
+		fetch_ht_irq_msg(data->irq, &msg);
+		msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK |
+				    HT_IRQ_LOW_DEST_ID_MASK);
+		msg.address_lo |= HT_IRQ_LOW_VECTOR(cfg->vector) |
+				  HT_IRQ_LOW_DEST_ID(cfg->dest_apicid);
+		msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+		msg.address_hi |= HT_IRQ_HIGH_DEST_ID(cfg->dest_apicid);
+		write_ht_irq_msg(data->irq, &msg);
+	}
+
+	return ret;
 }
 
 static struct irq_chip ht_irq_chip = {
 	.name			= "PCI-HT",
 	.irq_mask		= mask_ht_irq,
 	.irq_unmask		= unmask_ht_irq,
-	.irq_ack		= apic_ack_edge,
+	.irq_ack		= irq_chip_ack_parent,
 	.irq_set_affinity	= ht_set_affinity,
-	.irq_retrigger		= apic_retrigger_irq,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+static int htirq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+			      unsigned int nr_irqs, void *arg)
 {
-	struct irq_cfg *cfg;
-	struct ht_irq_msg msg;
-	unsigned dest;
-	int err;
+	struct ht_irq_cfg *ht_cfg;
+	struct irq_alloc_info *info = arg;
+	struct pci_dev *dev;
+	irq_hw_number_t hwirq;
+	int ret;
 
-	if (disable_apic)
-		return -ENXIO;
+	if (nr_irqs > 1 || !info)
+		return -EINVAL;
 
-	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, apic->target_cpus());
-	if (err)
-		return err;
+	dev = info->ht_dev;
+	hwirq = (info->ht_idx & 0xFF) |
+		PCI_DEVID(dev->bus->number, dev->devfn) << 8 |
+		(pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 24;
+	if (irq_find_mapping(domain, hwirq) > 0)
+		return -EEXIST;
 
-	err = apic->cpu_mask_to_apicid_and(cfg->domain,
-					   apic->target_cpus(), &dest);
-	if (err)
-		return err;
+	ht_cfg = kmalloc(sizeof(*ht_cfg), GFP_KERNEL);
+	if (!ht_cfg)
+		return -ENOMEM;
 
-	msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info);
+	if (ret < 0) {
+		kfree(ht_cfg);
+		return ret;
+	}
+
+	/* Initialize msg to a value that will never match the first write. */
+	ht_cfg->msg.address_lo = 0xffffffff;
+	ht_cfg->msg.address_hi = 0xffffffff;
+	ht_cfg->dev = info->ht_dev;
+	ht_cfg->update = info->ht_update;
+	ht_cfg->pos = info->ht_pos;
+	ht_cfg->idx = 0x10 + (info->ht_idx * 2);
+	irq_domain_set_info(domain, virq, hwirq, &ht_irq_chip, ht_cfg,
+			    handle_edge_irq, ht_cfg, "edge");
+
+	return 0;
+}
+
+static void htirq_domain_free(struct irq_domain *domain, unsigned int virq,
+			      unsigned int nr_irqs)
+{
+	struct irq_data *irq_data = irq_domain_get_irq_data(domain, virq);
+
+	BUG_ON(nr_irqs != 1);
+	kfree(irq_data->chip_data);
+	irq_domain_free_irqs_top(domain, virq, nr_irqs);
+}
 
+static void htirq_domain_activate(struct irq_domain *domain,
+				  struct irq_data *irq_data)
+{
+	struct ht_irq_msg msg;
+	struct irq_cfg *cfg = irqd_cfg(irq_data);
+
+	msg.address_hi = HT_IRQ_HIGH_DEST_ID(cfg->dest_apicid);
 	msg.address_lo =
 		HT_IRQ_LOW_BASE |
-		HT_IRQ_LOW_DEST_ID(dest) |
+		HT_IRQ_LOW_DEST_ID(cfg->dest_apicid) |
 		HT_IRQ_LOW_VECTOR(cfg->vector) |
 		((apic->irq_dest_mode == 0) ?
 			HT_IRQ_LOW_DM_PHYSICAL :
@@ -95,13 +131,56 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 			HT_IRQ_LOW_MT_FIXED :
 			HT_IRQ_LOW_MT_ARBITRATED) |
 		HT_IRQ_LOW_IRQ_MASKED;
+	write_ht_irq_msg(irq_data->irq, &msg);
+}
 
-	write_ht_irq_msg(irq, &msg);
+static void htirq_domain_deactivate(struct irq_domain *domain,
+				    struct irq_data *irq_data)
+{
+	struct ht_irq_msg msg;
 
-	irq_set_chip_and_handler_name(irq, &ht_irq_chip,
-				      handle_edge_irq, "edge");
+	memset(&msg, 0, sizeof(msg));
+	write_ht_irq_msg(irq_data->irq, &msg);
+}
 
-	dev_dbg(&dev->dev, "irq %d for HT\n", irq);
+static const struct irq_domain_ops htirq_domain_ops = {
+	.alloc		= htirq_domain_alloc,
+	.free		= htirq_domain_free,
+	.activate	= htirq_domain_activate,
+	.deactivate	= htirq_domain_deactivate,
+};
 
-	return 0;
+void arch_init_htirq_domain(struct irq_domain *parent)
+{
+	if (disable_apic)
+		return;
+
+	htirq_domain = irq_domain_add_tree(NULL, &htirq_domain_ops, NULL);
+	if (!htirq_domain)
+		pr_warn("failed to initialize irqdomain for HTIRQ.\n");
+	else
+		htirq_domain->parent = parent;
+}
+
+int arch_setup_ht_irq(int idx, int pos, struct pci_dev *dev,
+		      ht_irq_update_t *update)
+{
+	struct irq_alloc_info info;
+
+	if (!htirq_domain)
+		return -ENOSYS;
+
+	init_irq_alloc_info(&info, NULL);
+	info.ht_idx = idx;
+	info.ht_pos = pos;
+	info.ht_dev = dev;
+	info.ht_update = update;
+
+	return irq_domain_alloc_irqs(htirq_domain, 1, dev_to_node(&dev->dev),
+				     &info);
+}
+
+void arch_teardown_ht_irq(unsigned int irq)
+{
+	irq_domain_free_irqs(irq, 1);
 }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f4dc2462a1ac..845dc0df2002 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -18,6 +18,16 @@
  *					and Rolf G. Tews
  *					for testing these extensively
  *	Paul Diefenbaugh	:	Added full ACPI support
+ *
+ * Historical information which is worth to be preserved:
+ *
+ * - SiS APIC rmw bug:
+ *
+ *	We used to have a workaround for a bug in SiS chips which
+ *	required to rewrite the index register for a read-modify-write
+ *	operation as the chip lost the index information which was
+ *	setup for the read already. We cache the data now, so that
+ *	workaround has been removed.
  */
 
 #include <linux/mm.h>
@@ -31,13 +41,13 @@
 #include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/syscore_ops.h>
-#include <linux/irqdomain.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>	/* time_after() */
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 
+#include <asm/irqdomain.h>
 #include <asm/idle.h>
 #include <asm/io.h>
 #include <asm/smp.h>
@@ -63,27 +73,31 @@
 #define	for_each_ioapic_pin(idx, pin)	\
 	for_each_ioapic((idx))		\
 		for_each_pin((idx), (pin))
-
 #define for_each_irq_pin(entry, head) \
 	list_for_each_entry(entry, &head, list)
 
-/*
- *      Is the SiS APIC rmw bug present ?
- *      -1 = don't know, 0 = no, 1 = yes
- */
-int sis_apic_bug = -1;
-
 static DEFINE_RAW_SPINLOCK(ioapic_lock);
 static DEFINE_MUTEX(ioapic_mutex);
 static unsigned int ioapic_dynirq_base;
 static int ioapic_initialized;
 
-struct mp_pin_info {
+struct irq_pin_list {
+	struct list_head list;
+	int apic, pin;
+};
+
+struct mp_chip_data {
+	struct list_head irq_2_pin;
+	struct IO_APIC_route_entry entry;
 	int trigger;
 	int polarity;
-	int node;
-	int set;
 	u32 count;
+	bool isa_irq;
+};
+
+struct mp_ioapic_gsi {
+	u32 gsi_base;
+	u32 gsi_end;
 };
 
 static struct ioapic {
@@ -101,7 +115,6 @@ static struct ioapic {
 	struct mp_ioapic_gsi  gsi_config;
 	struct ioapic_domain_cfg irqdomain_cfg;
 	struct irq_domain *irqdomain;
-	struct mp_pin_info *pin_info;
 	struct resource *iomem_res;
 } ioapics[MAX_IO_APICS];
 
@@ -117,7 +130,7 @@ unsigned int mpc_ioapic_addr(int ioapic_idx)
 	return ioapics[ioapic_idx].mp_config.apicaddr;
 }
 
-struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx)
+static inline struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx)
 {
 	return &ioapics[ioapic_idx].gsi_config;
 }
@@ -129,11 +142,16 @@ static inline int mp_ioapic_pin_count(int ioapic)
 	return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1;
 }
 
-u32 mp_pin_to_gsi(int ioapic, int pin)
+static inline u32 mp_pin_to_gsi(int ioapic, int pin)
 {
 	return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin;
 }
 
+static inline bool mp_is_legacy_irq(int irq)
+{
+	return irq >= 0 && irq < nr_legacy_irqs();
+}
+
 /*
  * Initialize all legacy IRQs and all pins on the first IOAPIC
  * if we have legacy interrupt controller. Kernel boot option "pirq="
@@ -144,12 +162,7 @@ static inline int mp_init_irq_at_boot(int ioapic, int irq)
 	if (!nr_legacy_irqs())
 		return 0;
 
-	return ioapic == 0 || (irq >= 0 && irq < nr_legacy_irqs());
-}
-
-static inline struct mp_pin_info *mp_pin_info(int ioapic_idx, int pin)
-{
-	return ioapics[ioapic_idx].pin_info + pin;
+	return ioapic == 0 || mp_is_legacy_irq(irq);
 }
 
 static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic)
@@ -216,16 +229,6 @@ void mp_save_irq(struct mpc_intsrc *m)
 		panic("Max # of irq sources exceeded!!\n");
 }
 
-struct irq_pin_list {
-	struct list_head list;
-	int apic, pin;
-};
-
-static struct irq_pin_list *alloc_irq_pin_list(int node)
-{
-	return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node);
-}
-
 static void alloc_ioapic_saved_registers(int idx)
 {
 	size_t size;
@@ -247,8 +250,7 @@ static void free_ioapic_saved_registers(int idx)
 
 int __init arch_early_ioapic_init(void)
 {
-	struct irq_cfg *cfg;
-	int i, node = cpu_to_node(0);
+	int i;
 
 	if (!nr_legacy_irqs())
 		io_apic_irqs = ~0UL;
@@ -256,16 +258,6 @@ int __init arch_early_ioapic_init(void)
 	for_each_ioapic(i)
 		alloc_ioapic_saved_registers(i);
 
-	/*
-	 * For legacy IRQ's, start with assigning irq0 to irq15 to
-	 * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's.
-	 */
-	for (i = 0; i < nr_legacy_irqs(); i++) {
-		cfg = alloc_irq_and_cfg_at(i, node);
-		cfg->vector = IRQ0_VECTOR + i;
-		cpumask_setall(cfg->domain);
-	}
-
 	return 0;
 }
 
@@ -283,7 +275,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 		+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
 }
 
-void io_apic_eoi(unsigned int apic, unsigned int vector)
+static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 	writel(vector, &io_apic->eoi);
@@ -296,7 +288,8 @@ unsigned int native_io_apic_read(unsigned int apic, unsigned int reg)
 	return readl(&io_apic->data);
 }
 
-void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+static void io_apic_write(unsigned int apic, unsigned int reg,
+			  unsigned int value)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 
@@ -304,21 +297,6 @@ void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int valu
 	writel(value, &io_apic->data);
 }
 
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- *
- * Older SiS APIC requires we rewrite the index register
- */
-void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-
-	if (sis_apic_bug)
-		writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
 union entry_union {
 	struct { u32 w1, w2; };
 	struct IO_APIC_route_entry entry;
@@ -378,7 +356,7 @@ static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 static void ioapic_mask_entry(int apic, int pin)
 {
 	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
+	union entry_union eu = { .entry.mask = IOAPIC_MASKED };
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
@@ -391,16 +369,17 @@ static void ioapic_mask_entry(int apic, int pin)
  * shared ISA-space IRQs, so we have to support them. We are super
  * fast in the common case, and fast for shared ISA-space IRQs.
  */
-static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int __add_pin_to_irq_node(struct mp_chip_data *data,
+				 int node, int apic, int pin)
 {
 	struct irq_pin_list *entry;
 
 	/* don't allow duplicates */
-	for_each_irq_pin(entry, cfg->irq_2_pin)
+	for_each_irq_pin(entry, data->irq_2_pin)
 		if (entry->apic == apic && entry->pin == pin)
 			return 0;
 
-	entry = alloc_irq_pin_list(node);
+	entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node);
 	if (!entry) {
 		pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
 		       node, apic, pin);
@@ -408,16 +387,16 @@ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pi
 	}
 	entry->apic = apic;
 	entry->pin = pin;
+	list_add_tail(&entry->list, &data->irq_2_pin);
 
-	list_add_tail(&entry->list, &cfg->irq_2_pin);
 	return 0;
 }
 
-static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin)
+static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin)
 {
 	struct irq_pin_list *tmp, *entry;
 
-	list_for_each_entry_safe(entry, tmp, &cfg->irq_2_pin, list)
+	list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list)
 		if (entry->apic == apic && entry->pin == pin) {
 			list_del(&entry->list);
 			kfree(entry);
@@ -425,22 +404,23 @@ static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin)
 		}
 }
 
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static void add_pin_to_irq_node(struct mp_chip_data *data,
+				int node, int apic, int pin)
 {
-	if (__add_pin_to_irq_node(cfg, node, apic, pin))
+	if (__add_pin_to_irq_node(data, node, apic, pin))
 		panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
 }
 
 /*
  * Reroute an IRQ to a different pin.
  */
-static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
+static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node,
 					   int oldapic, int oldpin,
 					   int newapic, int newpin)
 {
 	struct irq_pin_list *entry;
 
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
+	for_each_irq_pin(entry, data->irq_2_pin) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
@@ -450,32 +430,26 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 	}
 
 	/* old apic/pin didn't exist, so just add new ones */
-	add_pin_to_irq_node(cfg, node, newapic, newpin);
-}
-
-static void __io_apic_modify_irq(struct irq_pin_list *entry,
-				 int mask_and, int mask_or,
-				 void (*final)(struct irq_pin_list *entry))
-{
-	unsigned int reg, pin;
-
-	pin = entry->pin;
-	reg = io_apic_read(entry->apic, 0x10 + pin * 2);
-	reg &= mask_and;
-	reg |= mask_or;
-	io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
-	if (final)
-		final(entry);
+	add_pin_to_irq_node(data, node, newapic, newpin);
 }
 
-static void io_apic_modify_irq(struct irq_cfg *cfg,
+static void io_apic_modify_irq(struct mp_chip_data *data,
 			       int mask_and, int mask_or,
 			       void (*final)(struct irq_pin_list *entry))
 {
+	union entry_union eu;
 	struct irq_pin_list *entry;
 
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		__io_apic_modify_irq(entry, mask_and, mask_or, final);
+	eu.entry = data->entry;
+	eu.w1 &= mask_and;
+	eu.w1 |= mask_or;
+	data->entry = eu.entry;
+
+	for_each_irq_pin(entry, data->irq_2_pin) {
+		io_apic_write(entry->apic, 0x10 + 2 * entry->pin, eu.w1);
+		if (final)
+			final(entry);
+	}
 }
 
 static void io_apic_sync(struct irq_pin_list *entry)
@@ -490,39 +464,31 @@ static void io_apic_sync(struct irq_pin_list *entry)
 	readl(&io_apic->data);
 }
 
-static void mask_ioapic(struct irq_cfg *cfg)
+static void mask_ioapic_irq(struct irq_data *irq_data)
 {
+	struct mp_chip_data *data = irq_data->chip_data;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
+	io_apic_modify_irq(data, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-static void mask_ioapic_irq(struct irq_data *data)
+static void __unmask_ioapic(struct mp_chip_data *data)
 {
-	mask_ioapic(irqd_cfg(data));
+	io_apic_modify_irq(data, ~IO_APIC_REDIR_MASKED, 0, NULL);
 }
 
-static void __unmask_ioapic(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
-}
-
-static void unmask_ioapic(struct irq_cfg *cfg)
+static void unmask_ioapic_irq(struct irq_data *irq_data)
 {
+	struct mp_chip_data *data = irq_data->chip_data;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_ioapic(cfg);
+	__unmask_ioapic(data);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-static void unmask_ioapic_irq(struct irq_data *data)
-{
-	unmask_ioapic(irqd_cfg(data));
-}
-
 /*
  * IO-APIC versions below 0x20 don't support EOI register.
  * For the record, here is the information about various versions:
@@ -539,7 +505,7 @@ static void unmask_ioapic_irq(struct irq_data *data)
  * Otherwise, we simulate the EOI message manually by changing the trigger
  * mode to edge and then back to level, with RTE being masked during this.
  */
-void native_eoi_ioapic_pin(int apic, int pin, int vector)
+static void __eoi_ioapic_pin(int apic, int pin, int vector)
 {
 	if (mpc_ioapic_ver(apic) >= 0x20) {
 		io_apic_eoi(apic, vector);
@@ -551,7 +517,7 @@ void native_eoi_ioapic_pin(int apic, int pin, int vector)
 		/*
 		 * Mask the entry and change the trigger mode to edge.
 		 */
-		entry1.mask = 1;
+		entry1.mask = IOAPIC_MASKED;
 		entry1.trigger = IOAPIC_EDGE;
 
 		__ioapic_write_entry(apic, pin, entry1);
@@ -563,15 +529,14 @@ void native_eoi_ioapic_pin(int apic, int pin, int vector)
 	}
 }
 
-void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+void eoi_ioapic_pin(int vector, struct mp_chip_data *data)
 {
-	struct irq_pin_list *entry;
 	unsigned long flags;
+	struct irq_pin_list *entry;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
-					       cfg->vector);
+	for_each_irq_pin(entry, data->irq_2_pin)
+		__eoi_ioapic_pin(entry->apic, entry->pin, vector);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -588,8 +553,8 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 	 * Make sure the entry is masked and re-read the contents to check
 	 * if it is a level triggered pin and if the remote-IRR is set.
 	 */
-	if (!entry.mask) {
-		entry.mask = 1;
+	if (entry.mask == IOAPIC_UNMASKED) {
+		entry.mask = IOAPIC_MASKED;
 		ioapic_write_entry(apic, pin, entry);
 		entry = ioapic_read_entry(apic, pin);
 	}
@@ -602,13 +567,12 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 		 * doesn't clear the remote-IRR if the trigger mode is not
 		 * set to level.
 		 */
-		if (!entry.trigger) {
+		if (entry.trigger == IOAPIC_EDGE) {
 			entry.trigger = IOAPIC_LEVEL;
 			ioapic_write_entry(apic, pin, entry);
 		}
-
 		raw_spin_lock_irqsave(&ioapic_lock, flags);
-		x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector);
+		__eoi_ioapic_pin(apic, pin, entry.vector);
 		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
 
@@ -706,8 +670,8 @@ void mask_ioapic_entries(void)
 			struct IO_APIC_route_entry entry;
 
 			entry = ioapics[apic].saved_registers[pin];
-			if (!entry.mask) {
-				entry.mask = 1;
+			if (entry.mask == IOAPIC_UNMASKED) {
+				entry.mask = IOAPIC_MASKED;
 				ioapic_write_entry(apic, pin, entry);
 			}
 		}
@@ -809,11 +773,11 @@ static int EISA_ELCR(unsigned int irq)
 
 #endif
 
-/* ISA interrupts are always polarity zero edge triggered,
+/* ISA interrupts are always active high edge triggered,
  * when listed as conforming in the MP table. */
 
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
+#define default_ISA_trigger(idx)	(IOAPIC_EDGE)
+#define default_ISA_polarity(idx)	(IOAPIC_POL_HIGH)
 
 /* EISA interrupts are always polarity zero and can be edge or level
  * trigger depending on the ELCR value.  If an interrupt is listed as
@@ -823,53 +787,55 @@ static int EISA_ELCR(unsigned int irq)
 #define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
 #define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
-/* PCI interrupts are always polarity one level triggered,
+/* PCI interrupts are always active low level triggered,
  * when listed as conforming in the MP table. */
 
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
+#define default_PCI_trigger(idx)	(IOAPIC_LEVEL)
+#define default_PCI_polarity(idx)	(IOAPIC_POL_LOW)
 
 static int irq_polarity(int idx)
 {
 	int bus = mp_irqs[idx].srcbus;
-	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].irqflag & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-			if (test_bit(bus, mp_bus_not_pci))
-				polarity = default_ISA_polarity(idx);
-			else
-				polarity = default_PCI_polarity(idx);
-			break;
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			pr_warn("broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			pr_warn("broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
+	switch (mp_irqs[idx].irqflag & 0x03) {
+	case 0:
+		/* conforms to spec, ie. bus-type dependent polarity */
+		if (test_bit(bus, mp_bus_not_pci))
+			return default_ISA_polarity(idx);
+		else
+			return default_PCI_polarity(idx);
+	case 1:
+		return IOAPIC_POL_HIGH;
+	case 2:
+		pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");
+	case 3:
+	default: /* Pointless default required due to do gcc stupidity */
+		return IOAPIC_POL_LOW;
+	}
+}
+
+#ifdef CONFIG_EISA
+static int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+	switch (mp_bus_id_to_type[bus]) {
+	case MP_BUS_PCI:
+	case MP_BUS_ISA:
+		return trigger;
+	case MP_BUS_EISA:
+		return default_EISA_trigger(idx);
 	}
-	return polarity;
+	pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);
+	return IOAPIC_LEVEL;
 }
+#else
+static inline int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+	return trigger;
+}
+#endif
 
 static int irq_trigger(int idx)
 {
@@ -879,153 +845,227 @@ static int irq_trigger(int idx)
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].irqflag>>2) & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent */
-			if (test_bit(bus, mp_bus_not_pci))
-				trigger = default_ISA_trigger(idx);
-			else
-				trigger = default_PCI_trigger(idx);
-#ifdef CONFIG_EISA
-			switch (mp_bus_id_to_type[bus]) {
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					trigger = default_EISA_trigger(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				default:
-				{
-					pr_warn("broken BIOS!!\n");
-					trigger = 1;
-					break;
-				}
-			}
+	switch ((mp_irqs[idx].irqflag >> 2) & 0x03) {
+	case 0:
+		/* conforms to spec, ie. bus-type dependent trigger mode */
+		if (test_bit(bus, mp_bus_not_pci))
+			trigger = default_ISA_trigger(idx);
+		else
+			trigger = default_PCI_trigger(idx);
+		/* Take EISA into account */
+		return eisa_irq_trigger(idx, bus, trigger);
+	case 1:
+		return IOAPIC_EDGE;
+	case 2:
+		pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");
+	case 3:
+	default: /* Pointless default required due to do gcc stupidity */
+		return IOAPIC_LEVEL;
+	}
+}
+
+void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node,
+			   int trigger, int polarity)
+{
+	init_irq_alloc_info(info, NULL);
+	info->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+	info->ioapic_node = node;
+	info->ioapic_trigger = trigger;
+	info->ioapic_polarity = polarity;
+	info->ioapic_valid = 1;
+}
+
+#ifndef CONFIG_ACPI
+int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
 #endif
-			break;
-		case 1: /* edge */
-		{
-			trigger = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			pr_warn("broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-		case 3: /* level */
-		{
-			trigger = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			pr_warn("broken BIOS!!\n");
-			trigger = 0;
-			break;
+
+static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst,
+				   struct irq_alloc_info *src,
+				   u32 gsi, int ioapic_idx, int pin)
+{
+	int trigger, polarity;
+
+	copy_irq_alloc_info(dst, src);
+	dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+	dst->ioapic_id = mpc_ioapic_id(ioapic_idx);
+	dst->ioapic_pin = pin;
+	dst->ioapic_valid = 1;
+	if (src && src->ioapic_valid) {
+		dst->ioapic_node = src->ioapic_node;
+		dst->ioapic_trigger = src->ioapic_trigger;
+		dst->ioapic_polarity = src->ioapic_polarity;
+	} else {
+		dst->ioapic_node = NUMA_NO_NODE;
+		if (acpi_get_override_irq(gsi, &trigger, &polarity) >= 0) {
+			dst->ioapic_trigger = trigger;
+			dst->ioapic_polarity = polarity;
+		} else {
+			/*
+			 * PCI interrupts are always active low level
+			 * triggered.
+			 */
+			dst->ioapic_trigger = IOAPIC_LEVEL;
+			dst->ioapic_polarity = IOAPIC_POL_LOW;
 		}
 	}
-	return trigger;
 }
 
-static int alloc_irq_from_domain(struct irq_domain *domain, u32 gsi, int pin)
+static int ioapic_alloc_attr_node(struct irq_alloc_info *info)
+{
+	return (info && info->ioapic_valid) ? info->ioapic_node : NUMA_NO_NODE;
+}
+
+static void mp_register_handler(unsigned int irq, unsigned long trigger)
+{
+	irq_flow_handler_t hdl;
+	bool fasteoi;
+
+	if (trigger) {
+		irq_set_status_flags(irq, IRQ_LEVEL);
+		fasteoi = true;
+	} else {
+		irq_clear_status_flags(irq, IRQ_LEVEL);
+		fasteoi = false;
+	}
+
+	hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
+	__irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge");
+}
+
+static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info)
 {
+	struct mp_chip_data *data = irq_get_chip_data(irq);
+
+	/*
+	 * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger
+	 * and polarity attirbutes. So allow the first user to reprogram the
+	 * pin with real trigger and polarity attributes.
+	 */
+	if (irq < nr_legacy_irqs() && data->count == 1) {
+		if (info->ioapic_trigger != data->trigger)
+			mp_register_handler(irq, data->trigger);
+		data->entry.trigger = data->trigger = info->ioapic_trigger;
+		data->entry.polarity = data->polarity = info->ioapic_polarity;
+	}
+
+	return data->trigger == info->ioapic_trigger &&
+	       data->polarity == info->ioapic_polarity;
+}
+
+static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
+				 struct irq_alloc_info *info)
+{
+	bool legacy = false;
 	int irq = -1;
-	int ioapic = (int)(long)domain->host_data;
 	int type = ioapics[ioapic].irqdomain_cfg.type;
 
 	switch (type) {
 	case IOAPIC_DOMAIN_LEGACY:
 		/*
-		 * Dynamically allocate IRQ number for non-ISA IRQs in the first 16
-		 * GSIs on some weird platforms.
+		 * Dynamically allocate IRQ number for non-ISA IRQs in the first
+		 * 16 GSIs on some weird platforms.
 		 */
-		if (gsi < nr_legacy_irqs())
-			irq = irq_create_mapping(domain, pin);
-		else if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0)
+		if (!ioapic_initialized || gsi >= nr_legacy_irqs())
 			irq = gsi;
+		legacy = mp_is_legacy_irq(irq);
 		break;
 	case IOAPIC_DOMAIN_STRICT:
-		if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0)
-			irq = gsi;
+		irq = gsi;
 		break;
 	case IOAPIC_DOMAIN_DYNAMIC:
-		irq = irq_create_mapping(domain, pin);
 		break;
 	default:
 		WARN(1, "ioapic: unknown irqdomain type %d\n", type);
-		break;
+		return -1;
+	}
+
+	return __irq_domain_alloc_irqs(domain, irq, 1,
+				       ioapic_alloc_attr_node(info),
+				       info, legacy);
+}
+
+/*
+ * Need special handling for ISA IRQs because there may be multiple IOAPIC pins
+ * sharing the same ISA IRQ number and irqdomain only supports 1:1 mapping
+ * between IOAPIC pin and IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are
+ * used for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H).
+ * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are available, and
+ * some BIOSes may use MP Interrupt Source records to override IRQ numbers for
+ * PIRQs instead of reprogramming the interrupt routing logic. Thus there may be
+ * multiple pins sharing the same legacy IRQ number when ACPI is disabled.
+ */
+static int alloc_isa_irq_from_domain(struct irq_domain *domain,
+				     int irq, int ioapic, int pin,
+				     struct irq_alloc_info *info)
+{
+	struct mp_chip_data *data;
+	struct irq_data *irq_data = irq_get_irq_data(irq);
+	int node = ioapic_alloc_attr_node(info);
+
+	/*
+	 * Legacy ISA IRQ has already been allocated, just add pin to
+	 * the pin list assoicated with this IRQ and program the IOAPIC
+	 * entry. The IOAPIC entry
+	 */
+	if (irq_data && irq_data->parent_data) {
+		if (!mp_check_pin_attr(irq, info))
+			return -EBUSY;
+		if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic,
+					  info->ioapic_pin))
+			return -ENOMEM;
+	} else {
+		irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true);
+		if (irq >= 0) {
+			irq_data = irq_domain_get_irq_data(domain, irq);
+			data = irq_data->chip_data;
+			data->isa_irq = true;
+		}
 	}
 
-	return irq > 0 ? irq : -1;
+	return irq;
 }
 
 static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
-			     unsigned int flags)
+			     unsigned int flags, struct irq_alloc_info *info)
 {
 	int irq;
+	bool legacy = false;
+	struct irq_alloc_info tmp;
+	struct mp_chip_data *data;
 	struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
-	struct mp_pin_info *info = mp_pin_info(ioapic, pin);
 
 	if (!domain)
-		return -1;
+		return -ENOSYS;
 
-	mutex_lock(&ioapic_mutex);
-
-	/*
-	 * Don't use irqdomain to manage ISA IRQs because there may be
-	 * multiple IOAPIC pins sharing the same ISA IRQ number and
-	 * irqdomain only supports 1:1 mapping between IOAPIC pin and
-	 * IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are used
-	 * for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H).
-	 * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are
-	 * available, and some BIOSes may use MP Interrupt Source records
-	 * to override IRQ numbers for PIRQs instead of reprogramming
-	 * the interrupt routing logic. Thus there may be multiple pins
-	 * sharing the same legacy IRQ number when ACPI is disabled.
-	 */
 	if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) {
 		irq = mp_irqs[idx].srcbusirq;
-		if (flags & IOAPIC_MAP_ALLOC) {
-			if (info->count == 0 &&
-			    mp_irqdomain_map(domain, irq, pin) != 0)
-				irq = -1;
+		legacy = mp_is_legacy_irq(irq);
+	}
 
-			/* special handling for timer IRQ0 */
+	mutex_lock(&ioapic_mutex);
+	if (!(flags & IOAPIC_MAP_ALLOC)) {
+		if (!legacy) {
+			irq = irq_find_mapping(domain, pin);
 			if (irq == 0)
-				info->count++;
+				irq = -ENOENT;
 		}
 	} else {
-		irq = irq_find_mapping(domain, pin);
-		if (irq <= 0 && (flags & IOAPIC_MAP_ALLOC))
-			irq = alloc_irq_from_domain(domain, gsi, pin);
-	}
-
-	if (flags & IOAPIC_MAP_ALLOC) {
-		/* special handling for legacy IRQs */
-		if (irq < nr_legacy_irqs() && info->count == 1 &&
-		    mp_irqdomain_map(domain, irq, pin) != 0)
-			irq = -1;
-
-		if (irq > 0)
-			info->count++;
-		else if (info->count == 0)
-			info->set = 0;
+		ioapic_copy_alloc_attr(&tmp, info, gsi, ioapic, pin);
+		if (legacy)
+			irq = alloc_isa_irq_from_domain(domain, irq,
+							ioapic, pin, &tmp);
+		else if ((irq = irq_find_mapping(domain, pin)) == 0)
+			irq = alloc_irq_from_domain(domain, ioapic, gsi, &tmp);
+		else if (!mp_check_pin_attr(irq, &tmp))
+			irq = -EBUSY;
+		if (irq >= 0) {
+			data = irq_get_chip_data(irq);
+			data->count++;
+		}
 	}
-
 	mutex_unlock(&ioapic_mutex);
 
-	return irq > 0 ? irq : -1;
+	return irq;
 }
 
 static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags)
@@ -1058,10 +1098,10 @@ static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags)
 	}
 #endif
 
-	return  mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags);
+	return  mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL);
 }
 
-int mp_map_gsi_to_irq(u32 gsi, unsigned int flags)
+int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info)
 {
 	int ioapic, pin, idx;
 
@@ -1074,31 +1114,24 @@ int mp_map_gsi_to_irq(u32 gsi, unsigned int flags)
 	if ((flags & IOAPIC_MAP_CHECK) && idx < 0)
 		return -1;
 
-	return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags);
+	return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info);
 }
 
 void mp_unmap_irq(int irq)
 {
-	struct irq_data *data = irq_get_irq_data(irq);
-	struct mp_pin_info *info;
-	int ioapic, pin;
+	struct irq_data *irq_data = irq_get_irq_data(irq);
+	struct mp_chip_data *data;
 
-	if (!data || !data->domain)
+	if (!irq_data || !irq_data->domain)
 		return;
 
-	ioapic = (int)(long)data->domain->host_data;
-	pin = (int)data->hwirq;
-	info = mp_pin_info(ioapic, pin);
+	data = irq_data->chip_data;
+	if (!data || data->isa_irq)
+		return;
 
 	mutex_lock(&ioapic_mutex);
-	if (--info->count == 0) {
-		info->set = 0;
-		if (irq < nr_legacy_irqs() &&
-		    ioapics[ioapic].irqdomain_cfg.type == IOAPIC_DOMAIN_LEGACY)
-			mp_irqdomain_unmap(data->domain, irq);
-		else
-			irq_dispose_mapping(irq);
-	}
+	if (--data->count == 0)
+		irq_domain_free_irqs(irq, 1);
 	mutex_unlock(&ioapic_mutex);
 }
 
@@ -1165,7 +1198,7 @@ out:
 }
 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 
-static struct irq_chip ioapic_chip;
+static struct irq_chip ioapic_chip, ioapic_ir_chip;
 
 #ifdef CONFIG_X86_32
 static inline int IO_APIC_irq_trigger(int irq)
@@ -1189,96 +1222,6 @@ static inline int IO_APIC_irq_trigger(int irq)
 }
 #endif
 
-static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
-				 unsigned long trigger)
-{
-	struct irq_chip *chip = &ioapic_chip;
-	irq_flow_handler_t hdl;
-	bool fasteoi;
-
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL) {
-		irq_set_status_flags(irq, IRQ_LEVEL);
-		fasteoi = true;
-	} else {
-		irq_clear_status_flags(irq, IRQ_LEVEL);
-		fasteoi = false;
-	}
-
-	if (setup_remapped_irq(irq, cfg, chip))
-		fasteoi = trigger != 0;
-
-	hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
-	irq_set_chip_and_handler_name(irq, chip, hdl,
-				      fasteoi ? "fasteoi" : "edge");
-}
-
-int native_setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
-			      unsigned int destination, int vector,
-			      struct io_apic_irq_attr *attr)
-{
-	memset(entry, 0, sizeof(*entry));
-
-	entry->delivery_mode = apic->irq_delivery_mode;
-	entry->dest_mode     = apic->irq_dest_mode;
-	entry->dest	     = destination;
-	entry->vector	     = vector;
-	entry->mask	     = 0;			/* enable IRQ */
-	entry->trigger	     = attr->trigger;
-	entry->polarity	     = attr->polarity;
-
-	/*
-	 * Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (attr->trigger)
-		entry->mask = 1;
-
-	return 0;
-}
-
-static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
-				struct io_apic_irq_attr *attr)
-{
-	struct IO_APIC_route_entry entry;
-	unsigned int dest;
-
-	if (!IO_APIC_IRQ(irq))
-		return;
-
-	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
-		return;
-
-	if (apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus(),
-					 &dest)) {
-		pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n",
-			mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
-		clear_irq_vector(irq, cfg);
-
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG
-		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
-		    "IRQ %d Mode:%i Active:%i Dest:%d)\n",
-		    attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin,
-		    cfg->vector, irq, attr->trigger, attr->polarity, dest);
-
-	if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) {
-		pr_warn("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
-			mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
-		clear_irq_vector(irq, cfg);
-
-		return;
-	}
-
-	ioapic_register_intr(irq, cfg, attr->trigger);
-	if (irq < nr_legacy_irqs())
-		legacy_pic->mask(irq);
-
-	ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry);
-}
-
 static void __init setup_IO_APIC_irqs(void)
 {
 	unsigned int ioapic, pin;
@@ -1298,106 +1241,41 @@ static void __init setup_IO_APIC_irqs(void)
 	}
 }
 
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
-					unsigned int pin, int vector)
-{
-	struct IO_APIC_route_entry entry;
-	unsigned int dest;
-
-	memset(&entry, 0, sizeof(entry));
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	if (unlikely(apic->cpu_mask_to_apicid_and(apic->target_cpus(),
-						  apic->target_cpus(), &dest)))
-		dest = BAD_APICID;
-
-	entry.dest_mode = apic->irq_dest_mode;
-	entry.mask = 0;			/* don't mask IRQ for edge */
-	entry.dest = dest;
-	entry.delivery_mode = apic->irq_delivery_mode;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we may have a 8259A-master in AEOI mode ...
-	 */
-	irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
-				      "edge");
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	ioapic_write_entry(ioapic_idx, pin, entry);
-}
-
-void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
+void ioapic_zap_locks(void)
 {
-	int i;
-
-	pr_debug(" NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:\n");
-
-	for (i = 0; i <= nr_entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		pr_debug(" %02x %02X  ", i, entry.dest);
-		pr_cont("%1d    %1d    %1d   %1d   %1d    "
-			"%1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector);
-	}
+	raw_spin_lock_init(&ioapic_lock);
 }
 
-void intel_ir_io_apic_print_entries(unsigned int apic,
-				    unsigned int nr_entries)
+static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
 {
 	int i;
+	char buf[256];
+	struct IO_APIC_route_entry entry;
+	struct IR_IO_APIC_route_entry *ir_entry = (void *)&entry;
 
-	pr_debug(" NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:\n");
-
+	printk(KERN_DEBUG "IOAPIC %d:\n", apic);
 	for (i = 0; i <= nr_entries; i++) {
-		struct IR_IO_APIC_route_entry *ir_entry;
-		struct IO_APIC_route_entry entry;
-
 		entry = ioapic_read_entry(apic, i);
-
-		ir_entry = (struct IR_IO_APIC_route_entry *)&entry;
-
-		pr_debug(" %02x %04X ", i, ir_entry->index);
-		pr_cont("%1d   %1d    %1d    %1d   %1d   "
-			"%1d    %1d     %X    %02X\n",
-			ir_entry->format,
-			ir_entry->mask,
-			ir_entry->trigger,
-			ir_entry->irr,
-			ir_entry->polarity,
-			ir_entry->delivery_status,
-			ir_entry->index2,
-			ir_entry->zero,
-			ir_entry->vector);
+		snprintf(buf, sizeof(buf),
+			 " pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)",
+			 i,
+			 entry.mask == IOAPIC_MASKED ? "disabled" : "enabled ",
+			 entry.trigger == IOAPIC_LEVEL ? "level" : "edge ",
+			 entry.polarity == IOAPIC_POL_LOW ? "low " : "high",
+			 entry.vector, entry.irr, entry.delivery_status);
+		if (ir_entry->format)
+			printk(KERN_DEBUG "%s, remapped, I(%04X),  Z(%X)\n",
+			       buf, (ir_entry->index << 15) | ir_entry->index,
+			       ir_entry->zero);
+		else
+			printk(KERN_DEBUG "%s, %s, D(%02X), M(%1d)\n",
+			       buf,
+			       entry.dest_mode == IOAPIC_DEST_MODE_LOGICAL ?
+			       "logical " : "physical",
+			       entry.dest, entry.delivery_mode);
 	}
 }
 
-void ioapic_zap_locks(void)
-{
-	raw_spin_lock_init(&ioapic_lock);
-}
-
 static void __init print_IO_APIC(int ioapic_idx)
 {
 	union IO_APIC_reg_00 reg_00;
@@ -1451,16 +1329,13 @@ static void __init print_IO_APIC(int ioapic_idx)
 	}
 
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	x86_io_apic_ops.print_entries(ioapic_idx, reg_01.bits.entries);
+	io_apic_print_entries(ioapic_idx, reg_01.bits.entries);
 }
 
 void __init print_IO_APICs(void)
 {
 	int ioapic_idx;
-	struct irq_cfg *cfg;
 	unsigned int irq;
-	struct irq_chip *chip;
 
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for_each_ioapic(ioapic_idx)
@@ -1480,18 +1355,20 @@ void __init print_IO_APICs(void)
 	printk(KERN_DEBUG "IRQ to pin mappings:\n");
 	for_each_active_irq(irq) {
 		struct irq_pin_list *entry;
+		struct irq_chip *chip;
+		struct mp_chip_data *data;
 
 		chip = irq_get_chip(irq);
-		if (chip != &ioapic_chip)
+		if (chip != &ioapic_chip && chip != &ioapic_ir_chip)
 			continue;
-
-		cfg = irq_cfg(irq);
-		if (!cfg)
+		data = irq_get_chip_data(irq);
+		if (!data)
 			continue;
-		if (list_empty(&cfg->irq_2_pin))
+		if (list_empty(&data->irq_2_pin))
 			continue;
+
 		printk(KERN_DEBUG "IRQ%d ", irq);
-		for_each_irq_pin(entry, cfg->irq_2_pin)
+		for_each_irq_pin(entry, data->irq_2_pin)
 			pr_cont("-> %d:%d", entry->apic, entry->pin);
 		pr_cont("\n");
 	}
@@ -1564,15 +1441,12 @@ void native_disable_io_apic(void)
 		struct IO_APIC_route_entry entry;
 
 		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest            = read_apic_id();
+		entry.mask		= IOAPIC_UNMASKED;
+		entry.trigger		= IOAPIC_EDGE;
+		entry.polarity		= IOAPIC_POL_HIGH;
+		entry.dest_mode		= IOAPIC_DEST_MODE_PHYSICAL;
+		entry.delivery_mode	= dest_ExtINT;
+		entry.dest		= read_apic_id();
 
 		/*
 		 * Add it to the IO-APIC irq-routing table:
@@ -1582,7 +1456,6 @@ void native_disable_io_apic(void)
 
 	if (cpu_has_apic || apic_from_smp_config())
 		disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-
 }
 
 /*
@@ -1792,7 +1665,6 @@ static int __init timer_irq_works(void)
  * This is not complete - we should be able to fake
  * an edge even if it isn't on the 8259A...
  */
-
 static unsigned int startup_ioapic_irq(struct irq_data *data)
 {
 	int was_pending = 0, irq = data->irq;
@@ -1804,74 +1676,22 @@ static unsigned int startup_ioapic_irq(struct irq_data *data)
 		if (legacy_pic->irq_pending(irq))
 			was_pending = 1;
 	}
-	__unmask_ioapic(irqd_cfg(data));
+	__unmask_ioapic(data->chip_data);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return was_pending;
 }
 
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
-	int apic, pin;
-	struct irq_pin_list *entry;
-	u8 vector = cfg->vector;
-
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
-		unsigned int reg;
-
-		apic = entry->apic;
-		pin = entry->pin;
-
-		io_apic_write(apic, 0x11 + pin*2, dest);
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
-		reg |= vector;
-		io_apic_modify(apic, 0x10 + pin*2, reg);
-	}
-}
-
-int native_ioapic_set_affinity(struct irq_data *data,
-			       const struct cpumask *mask,
-			       bool force)
-{
-	unsigned int dest, irq = data->irq;
-	unsigned long flags;
-	int ret;
-
-	if (!config_enabled(CONFIG_SMP))
-		return -EPERM;
-
-	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	ret = apic_set_affinity(data, mask, &dest);
-	if (!ret) {
-		/* Only the high 8 bits are valid. */
-		dest = SET_APIC_LOGICAL_ID(dest);
-		__target_IO_APIC_irq(irq, dest, irqd_cfg(data));
-		ret = IRQ_SET_MASK_OK_NOCOPY;
-	}
-	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-	return ret;
-}
-
 atomic_t irq_mis_count;
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
+static bool io_apic_level_ack_pending(struct mp_chip_data *data)
 {
 	struct irq_pin_list *entry;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
+	for_each_irq_pin(entry, data->irq_2_pin) {
 		unsigned int reg;
 		int pin;
 
@@ -1888,18 +1708,17 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	return false;
 }
 
-static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+static inline bool ioapic_irqd_mask(struct irq_data *data)
 {
 	/* If we are moving the irq we need to mask it */
 	if (unlikely(irqd_is_setaffinity_pending(data))) {
-		mask_ioapic(cfg);
+		mask_ioapic_irq(data);
 		return true;
 	}
 	return false;
 }
 
-static inline void ioapic_irqd_unmask(struct irq_data *data,
-				      struct irq_cfg *cfg, bool masked)
+static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
 {
 	if (unlikely(masked)) {
 		/* Only migrate the irq if the ack has been received.
@@ -1928,31 +1747,30 @@ static inline void ioapic_irqd_unmask(struct irq_data *data,
 		 * accurate and is causing problems then it is a hardware bug
 		 * and you can go talk to the chipset vendor about it.
 		 */
-		if (!io_apic_level_ack_pending(cfg))
+		if (!io_apic_level_ack_pending(data->chip_data))
 			irq_move_masked_irq(data);
-		unmask_ioapic(cfg);
+		unmask_ioapic_irq(data);
 	}
 }
 #else
-static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+static inline bool ioapic_irqd_mask(struct irq_data *data)
 {
 	return false;
 }
-static inline void ioapic_irqd_unmask(struct irq_data *data,
-				      struct irq_cfg *cfg, bool masked)
+static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
 {
 }
 #endif
 
-static void ack_ioapic_level(struct irq_data *data)
+static void ioapic_ack_level(struct irq_data *irq_data)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	int i, irq = data->irq;
+	struct irq_cfg *cfg = irqd_cfg(irq_data);
 	unsigned long v;
 	bool masked;
+	int i;
 
 	irq_complete_move(cfg);
-	masked = ioapic_irqd_mask(data, cfg);
+	masked = ioapic_irqd_mask(irq_data);
 
 	/*
 	 * It appears there is an erratum which affects at least version 0x11
@@ -2004,11 +1822,49 @@ static void ack_ioapic_level(struct irq_data *data)
 	 */
 	if (!(v & (1 << (i & 0x1f)))) {
 		atomic_inc(&irq_mis_count);
+		eoi_ioapic_pin(cfg->vector, irq_data->chip_data);
+	}
+
+	ioapic_irqd_unmask(irq_data, masked);
+}
+
+static void ioapic_ir_ack_level(struct irq_data *irq_data)
+{
+	struct mp_chip_data *data = irq_data->chip_data;
+
+	/*
+	 * Intr-remapping uses pin number as the virtual vector
+	 * in the RTE. Actual vector is programmed in
+	 * intr-remapping table entry. Hence for the io-apic
+	 * EOI we use the pin number.
+	 */
+	ack_APIC_irq();
+	eoi_ioapic_pin(data->entry.vector, data);
+}
 
-		eoi_ioapic_irq(irq, cfg);
+static int ioapic_set_affinity(struct irq_data *irq_data,
+			       const struct cpumask *mask, bool force)
+{
+	struct irq_data *parent = irq_data->parent_data;
+	struct mp_chip_data *data = irq_data->chip_data;
+	struct irq_pin_list *entry;
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	int ret;
+
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
+	if (ret >= 0 && ret != IRQ_SET_MASK_OK_DONE) {
+		cfg = irqd_cfg(irq_data);
+		data->entry.dest = cfg->dest_apicid;
+		data->entry.vector = cfg->vector;
+		for_each_irq_pin(entry, data->irq_2_pin)
+			__ioapic_write_entry(entry->apic, entry->pin,
+					     data->entry);
 	}
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	ioapic_irqd_unmask(data, cfg, masked);
+	return ret;
 }
 
 static struct irq_chip ioapic_chip __read_mostly = {
@@ -2016,10 +1872,20 @@ static struct irq_chip ioapic_chip __read_mostly = {
 	.irq_startup		= startup_ioapic_irq,
 	.irq_mask		= mask_ioapic_irq,
 	.irq_unmask		= unmask_ioapic_irq,
-	.irq_ack		= apic_ack_edge,
-	.irq_eoi		= ack_ioapic_level,
-	.irq_set_affinity	= native_ioapic_set_affinity,
-	.irq_retrigger		= apic_retrigger_irq,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_eoi		= ioapic_ack_level,
+	.irq_set_affinity	= ioapic_set_affinity,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
+};
+
+static struct irq_chip ioapic_ir_chip __read_mostly = {
+	.name			= "IR-IO-APIC",
+	.irq_startup		= startup_ioapic_irq,
+	.irq_mask		= mask_ioapic_irq,
+	.irq_unmask		= unmask_ioapic_irq,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_eoi		= ioapic_ir_ack_level,
+	.irq_set_affinity	= ioapic_set_affinity,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -2113,12 +1979,12 @@ static inline void __init unlock_ExtINT_logic(void)
 
 	memset(&entry1, 0, sizeof(entry1));
 
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
+	entry1.dest_mode = IOAPIC_DEST_MODE_PHYSICAL;
+	entry1.mask = IOAPIC_UNMASKED;
 	entry1.dest = hard_smp_processor_id();
 	entry1.delivery_mode = dest_ExtINT;
 	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
+	entry1.trigger = IOAPIC_EDGE;
 	entry1.vector = 0;
 
 	ioapic_write_entry(apic, pin, entry1);
@@ -2152,6 +2018,25 @@ static int __init disable_timer_pin_setup(char *arg)
 }
 early_param("disable_timer_pin_1", disable_timer_pin_setup);
 
+static int mp_alloc_timer_irq(int ioapic, int pin)
+{
+	int irq = -1;
+	struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
+
+	if (domain) {
+		struct irq_alloc_info info;
+
+		ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 0, 0);
+		info.ioapic_id = mpc_ioapic_id(ioapic);
+		info.ioapic_pin = pin;
+		mutex_lock(&ioapic_mutex);
+		irq = alloc_isa_irq_from_domain(domain, 0, ioapic, pin, &info);
+		mutex_unlock(&ioapic_mutex);
+	}
+
+	return irq;
+}
+
 /*
  * This code may look a bit paranoid, but it's supposed to cooperate with
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
@@ -2162,7 +2047,9 @@ early_param("disable_timer_pin_1", disable_timer_pin_setup);
  */
 static inline void __init check_timer(void)
 {
-	struct irq_cfg *cfg = irq_cfg(0);
+	struct irq_data *irq_data = irq_get_irq_data(0);
+	struct mp_chip_data *data = irq_data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(irq_data);
 	int node = cpu_to_node(0);
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
@@ -2174,7 +2061,6 @@ static inline void __init check_timer(void)
 	 * get/set the timer IRQ vector:
 	 */
 	legacy_pic->mask(0);
-	assign_irq_vector(0, cfg, apic->target_cpus());
 
 	/*
 	 * As IRQ0 is to be enabled in the 8259A, the virtual
@@ -2215,23 +2101,21 @@ static inline void __init check_timer(void)
 	}
 
 	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
+		/* Ok, does IRQ0 through the IOAPIC work? */
 		if (no_pin1) {
-			add_pin_to_irq_node(cfg, node, apic1, pin1);
-			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+			mp_alloc_timer_irq(apic1, pin1);
 		} else {
-			/* for edge trigger, setup_ioapic_irq already
-			 * leave it unmasked.
+			/*
+			 * for edge trigger, it's already unmasked,
 			 * so only need to unmask if it is level-trigger
 			 * do we really have level trigger timer?
 			 */
 			int idx;
 			idx = find_irq_entry(apic1, pin1, mp_INT);
 			if (idx != -1 && irq_trigger(idx))
-				unmask_ioapic(cfg);
+				unmask_ioapic_irq(irq_get_chip_data(0));
 		}
+		irq_domain_activate_irq(irq_data);
 		if (timer_irq_works()) {
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
@@ -2251,8 +2135,8 @@ static inline void __init check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
-		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+		replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
+		irq_domain_activate_irq(irq_data);
 		legacy_pic->unmask(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2329,36 +2213,35 @@ out:
 
 static int mp_irqdomain_create(int ioapic)
 {
-	size_t size;
+	struct irq_alloc_info info;
+	struct irq_domain *parent;
 	int hwirqs = mp_ioapic_pin_count(ioapic);
 	struct ioapic *ip = &ioapics[ioapic];
 	struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg;
 	struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic);
 
-	size = sizeof(struct mp_pin_info) * mp_ioapic_pin_count(ioapic);
-	ip->pin_info = kzalloc(size, GFP_KERNEL);
-	if (!ip->pin_info)
-		return -ENOMEM;
-
 	if (cfg->type == IOAPIC_DOMAIN_INVALID)
 		return 0;
 
+	init_irq_alloc_info(&info, NULL);
+	info.type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+	info.ioapic_id = mpc_ioapic_id(ioapic);
+	parent = irq_remapping_get_ir_irq_domain(&info);
+	if (!parent)
+		parent = x86_vector_domain;
+
 	ip->irqdomain = irq_domain_add_linear(cfg->dev, hwirqs, cfg->ops,
 					      (void *)(long)ioapic);
-	if(!ip->irqdomain) {
-		kfree(ip->pin_info);
-		ip->pin_info = NULL;
+	if (!ip->irqdomain)
 		return -ENOMEM;
-	}
+
+	ip->irqdomain->parent = parent;
 
 	if (cfg->type == IOAPIC_DOMAIN_LEGACY ||
 	    cfg->type == IOAPIC_DOMAIN_STRICT)
 		ioapic_dynirq_base = max(ioapic_dynirq_base,
 					 gsi_cfg->gsi_end + 1);
 
-	if (gsi_cfg->gsi_base == 0)
-		irq_set_default_host(ip->irqdomain);
-
 	return 0;
 }
 
@@ -2368,8 +2251,6 @@ static void ioapic_destroy_irqdomain(int idx)
 		irq_domain_remove(ioapics[idx].irqdomain);
 		ioapics[idx].irqdomain = NULL;
 	}
-	kfree(ioapics[idx].pin_info);
-	ioapics[idx].pin_info = NULL;
 }
 
 void __init setup_IO_APIC(void)
@@ -2399,20 +2280,6 @@ void __init setup_IO_APIC(void)
 	ioapic_initialized = 1;
 }
 
-/*
- *      Called after all the initialization is done. If we didn't find any
- *      APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
-	if (sis_apic_bug == -1)
-		sis_apic_bug = 0;
-	return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
 static void resume_ioapic_id(int ioapic_idx)
 {
 	unsigned long flags;
@@ -2451,20 +2318,6 @@ static int __init ioapic_init_ops(void)
 
 device_initcall(ioapic_init_ops);
 
-static int
-io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
-{
-	struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node);
-	int ret;
-
-	if (!cfg)
-		return -EINVAL;
-	ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin);
-	if (!ret)
-		setup_ioapic_irq(irq, cfg, attr);
-	return ret;
-}
-
 static int io_apic_get_redir_entries(int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
@@ -2692,7 +2545,7 @@ void __init setup_ioapic_dest(void)
 		else
 			mask = apic->target_cpus();
 
-		x86_io_apic_ops.set_affinity(idata, mask, false);
+		irq_set_affinity(irq, mask);
 	}
 
 }
@@ -2737,7 +2590,7 @@ static struct resource * __init ioapic_setup_resources(void)
 	return res;
 }
 
-void __init native_io_apic_init_mappings(void)
+void __init io_apic_init_mappings(void)
 {
 	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
 	struct resource *ioapic_res;
@@ -2962,7 +2815,6 @@ int mp_unregister_ioapic(u32 gsi_base)
 {
 	int ioapic, pin;
 	int found = 0;
-	struct mp_pin_info *pin_info;
 
 	for_each_ioapic(ioapic)
 		if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) {
@@ -2975,11 +2827,17 @@ int mp_unregister_ioapic(u32 gsi_base)
 	}
 
 	for_each_pin(ioapic, pin) {
-		pin_info = mp_pin_info(ioapic, pin);
-		if (pin_info->count) {
-			pr_warn("pin%d on IOAPIC%d is still in use.\n",
-				pin, ioapic);
-			return -EBUSY;
+		u32 gsi = mp_pin_to_gsi(ioapic, pin);
+		int irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+		struct mp_chip_data *data;
+
+		if (irq >= 0) {
+			data = irq_get_chip_data(irq);
+			if (data && data->count) {
+				pr_warn("pin%d on IOAPIC%d is still in use.\n",
+					pin, ioapic);
+				return -EBUSY;
+			}
 		}
 	}
 
@@ -3006,108 +2864,141 @@ int mp_ioapic_registered(u32 gsi_base)
 	return 0;
 }
 
-static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
-					int ioapic, int ioapic_pin,
-					int trigger, int polarity)
+static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data,
+				  struct irq_alloc_info *info)
 {
-	irq_attr->ioapic	= ioapic;
-	irq_attr->ioapic_pin	= ioapic_pin;
-	irq_attr->trigger	= trigger;
-	irq_attr->polarity	= polarity;
+	if (info && info->ioapic_valid) {
+		data->trigger = info->ioapic_trigger;
+		data->polarity = info->ioapic_polarity;
+	} else if (acpi_get_override_irq(gsi, &data->trigger,
+					 &data->polarity) < 0) {
+		/* PCI interrupts are always active low level triggered. */
+		data->trigger = IOAPIC_LEVEL;
+		data->polarity = IOAPIC_POL_LOW;
+	}
 }
 
-int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
-		     irq_hw_number_t hwirq)
+static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data,
+			   struct IO_APIC_route_entry *entry)
 {
-	int ioapic = (int)(long)domain->host_data;
-	struct mp_pin_info *info = mp_pin_info(ioapic, hwirq);
-	struct io_apic_irq_attr attr;
+	memset(entry, 0, sizeof(*entry));
+	entry->delivery_mode = apic->irq_delivery_mode;
+	entry->dest_mode     = apic->irq_dest_mode;
+	entry->dest	     = cfg->dest_apicid;
+	entry->vector	     = cfg->vector;
+	entry->trigger	     = data->trigger;
+	entry->polarity	     = data->polarity;
+	/*
+	 * Mask level triggered irqs. Edge triggered irqs are masked
+	 * by the irq core code in case they fire.
+	 */
+	if (data->trigger == IOAPIC_LEVEL)
+		entry->mask = IOAPIC_MASKED;
+	else
+		entry->mask = IOAPIC_UNMASKED;
+}
 
-	/* Get default attribute if not set by caller yet */
-	if (!info->set) {
-		u32 gsi = mp_pin_to_gsi(ioapic, hwirq);
+int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
+		       unsigned int nr_irqs, void *arg)
+{
+	int ret, ioapic, pin;
+	struct irq_cfg *cfg;
+	struct irq_data *irq_data;
+	struct mp_chip_data *data;
+	struct irq_alloc_info *info = arg;
 
-		if (acpi_get_override_irq(gsi, &info->trigger,
-					  &info->polarity) < 0) {
-			/*
-			 * PCI interrupts are always polarity one level
-			 * triggered.
-			 */
-			info->trigger = 1;
-			info->polarity = 1;
-		}
-		info->node = NUMA_NO_NODE;
+	if (!info || nr_irqs > 1)
+		return -EINVAL;
+	irq_data = irq_domain_get_irq_data(domain, virq);
+	if (!irq_data)
+		return -EINVAL;
 
-		/*
-		 * setup_IO_APIC_irqs() programs all legacy IRQs with default
-		 * trigger and polarity attributes. Don't set the flag for that
-		 * case so the first legacy IRQ user could reprogram the pin
-		 * with real trigger and polarity attributes.
-		 */
-		if (virq >= nr_legacy_irqs() || info->count)
-			info->set = 1;
-	}
-	set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger,
-			     info->polarity);
+	ioapic = mp_irqdomain_ioapic_idx(domain);
+	pin = info->ioapic_pin;
+	if (irq_find_mapping(domain, (irq_hw_number_t)pin) > 0)
+		return -EEXIST;
 
-	return io_apic_setup_irq_pin(virq, info->node, &attr);
-}
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq)
-{
-	struct irq_data *data = irq_get_irq_data(virq);
-	struct irq_cfg *cfg = irq_cfg(virq);
-	int ioapic = (int)(long)domain->host_data;
-	int pin = (int)data->hwirq;
+	info->ioapic_entry = &data->entry;
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info);
+	if (ret < 0) {
+		kfree(data);
+		return ret;
+	}
+
+	INIT_LIST_HEAD(&data->irq_2_pin);
+	irq_data->hwirq = info->ioapic_pin;
+	irq_data->chip = (domain->parent == x86_vector_domain) ?
+			  &ioapic_chip : &ioapic_ir_chip;
+	irq_data->chip_data = data;
+	mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info);
+
+	cfg = irqd_cfg(irq_data);
+	add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+	if (info->ioapic_entry)
+		mp_setup_entry(cfg, data, info->ioapic_entry);
+	mp_register_handler(virq, data->trigger);
+	if (virq < nr_legacy_irqs())
+		legacy_pic->mask(virq);
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG
+		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
+		    ioapic, mpc_ioapic_id(ioapic), pin, cfg->vector,
+		    virq, data->trigger, data->polarity, cfg->dest_apicid);
 
-	ioapic_mask_entry(ioapic, pin);
-	__remove_pin_from_irq(cfg, ioapic, pin);
-	WARN_ON(!list_empty(&cfg->irq_2_pin));
-	arch_teardown_hwirq(virq);
+	return 0;
 }
 
-int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node)
+void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
+		       unsigned int nr_irqs)
 {
-	int ret = 0;
-	int ioapic, pin;
-	struct mp_pin_info *info;
+	struct irq_data *irq_data;
+	struct mp_chip_data *data;
 
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return -ENODEV;
-
-	pin = mp_find_ioapic_pin(ioapic, gsi);
-	info = mp_pin_info(ioapic, pin);
-	trigger = trigger ? 1 : 0;
-	polarity = polarity ? 1 : 0;
-
-	mutex_lock(&ioapic_mutex);
-	if (!info->set) {
-		info->trigger = trigger;
-		info->polarity = polarity;
-		info->node = node;
-		info->set = 1;
-	} else if (info->trigger != trigger || info->polarity != polarity) {
-		ret = -EBUSY;
+	BUG_ON(nr_irqs != 1);
+	irq_data = irq_domain_get_irq_data(domain, virq);
+	if (irq_data && irq_data->chip_data) {
+		data = irq_data->chip_data;
+		__remove_pin_from_irq(data, mp_irqdomain_ioapic_idx(domain),
+				      (int)irq_data->hwirq);
+		WARN_ON(!list_empty(&data->irq_2_pin));
+		kfree(irq_data->chip_data);
 	}
-	mutex_unlock(&ioapic_mutex);
-
-	return ret;
+	irq_domain_free_irqs_top(domain, virq, nr_irqs);
 }
 
-/* Enable IOAPIC early just for system timer */
-void __init pre_init_apic_IRQ0(void)
+void mp_irqdomain_activate(struct irq_domain *domain,
+			   struct irq_data *irq_data)
 {
-	struct io_apic_irq_attr attr = { 0, 0, 0, 0 };
+	unsigned long flags;
+	struct irq_pin_list *entry;
+	struct mp_chip_data *data = irq_data->chip_data;
 
-	printk(KERN_INFO "Early APIC setup for system timer0\n");
-#ifndef CONFIG_SMP
-	physid_set_mask_of_physid(boot_cpu_physical_apicid,
-					 &phys_cpu_present_map);
-#endif
-	setup_local_APIC();
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
+	for_each_irq_pin(entry, data->irq_2_pin)
+		__ioapic_write_entry(entry->apic, entry->pin, data->entry);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+}
 
-	io_apic_setup_irq_pin(0, 0, &attr);
-	irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
-				      "edge");
+void mp_irqdomain_deactivate(struct irq_domain *domain,
+			     struct irq_data *irq_data)
+{
+	/* It won't be called for IRQ with multiple IOAPIC pins associated */
+	ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain),
+			  (int)irq_data->hwirq);
+}
+
+int mp_irqdomain_ioapic_idx(struct irq_domain *domain)
+{
+	return (int)(long)domain->host_data;
 }
+
+const struct irq_domain_ops mp_ioapic_irqdomain_ops = {
+	.alloc		= mp_irqdomain_alloc,
+	.free		= mp_irqdomain_free,
+	.activate	= mp_irqdomain_activate,
+	.deactivate	= mp_irqdomain_deactivate,
+};
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index d6ba2d660dc5..1a9d735e09c6 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
  *	Moved from arch/x86/kernel/apic/io_apic.c.
+ * Jiang Liu <jiang.liu@linux.intel.com>
+ *	Convert to hierarchical irqdomain
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,22 +16,23 @@
 #include <linux/dmar.h>
 #include <linux/hpet.h>
 #include <linux/msi.h>
+#include <asm/irqdomain.h>
 #include <asm/msidef.h>
 #include <asm/hpet.h>
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
 #include <asm/irq_remapping.h>
 
-void native_compose_msi_msg(struct pci_dev *pdev,
-			    unsigned int irq, unsigned int dest,
-			    struct msi_msg *msg, u8 hpet_id)
+static struct irq_domain *msi_default_domain;
+
+static void irq_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
 {
-	struct irq_cfg *cfg = irq_cfg(irq);
+	struct irq_cfg *cfg = irqd_cfg(data);
 
 	msg->address_hi = MSI_ADDR_BASE_HI;
 
 	if (x2apic_enabled())
-		msg->address_hi |= MSI_ADDR_EXT_DEST_ID(dest);
+		msg->address_hi |= MSI_ADDR_EXT_DEST_ID(cfg->dest_apicid);
 
 	msg->address_lo =
 		MSI_ADDR_BASE_LO |
@@ -39,7 +42,7 @@ void native_compose_msi_msg(struct pci_dev *pdev,
 		((apic->irq_delivery_mode != dest_LowestPrio) ?
 			MSI_ADDR_REDIRECTION_CPU :
 			MSI_ADDR_REDIRECTION_LOWPRI) |
-		MSI_ADDR_DEST_ID(dest);
+		MSI_ADDR_DEST_ID(cfg->dest_apicid);
 
 	msg->data =
 		MSI_DATA_TRIGGER_EDGE |
@@ -50,180 +53,201 @@ void native_compose_msi_msg(struct pci_dev *pdev,
 		MSI_DATA_VECTOR(cfg->vector);
 }
 
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
-			   struct msi_msg *msg, u8 hpet_id)
+/*
+ * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
+ * which implement the MSI or MSI-X Capability Structure.
+ */
+static struct irq_chip pci_msi_controller = {
+	.name			= "PCI-MSI",
+	.irq_unmask		= pci_msi_unmask_irq,
+	.irq_mask		= pci_msi_mask_irq,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_compose_msi_msg	= irq_msi_compose_msg,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
+};
+
+int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
-	struct irq_cfg *cfg;
-	int err;
-	unsigned dest;
+	struct irq_domain *domain;
+	struct irq_alloc_info info;
 
-	if (disable_apic)
-		return -ENXIO;
+	init_irq_alloc_info(&info, NULL);
+	info.type = X86_IRQ_ALLOC_TYPE_MSI;
+	info.msi_dev = dev;
 
-	cfg = irq_cfg(irq);
-	err = assign_irq_vector(irq, cfg, apic->target_cpus());
-	if (err)
-		return err;
+	domain = irq_remapping_get_irq_domain(&info);
+	if (domain == NULL)
+		domain = msi_default_domain;
+	if (domain == NULL)
+		return -ENOSYS;
 
-	err = apic->cpu_mask_to_apicid_and(cfg->domain,
-					   apic->target_cpus(), &dest);
-	if (err)
-		return err;
+	return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
+}
 
-	x86_msi.compose_msi_msg(pdev, irq, dest, msg, hpet_id);
+void native_teardown_msi_irq(unsigned int irq)
+{
+	irq_domain_free_irqs(irq, 1);
+}
 
-	return 0;
+static irq_hw_number_t pci_msi_get_hwirq(struct msi_domain_info *info,
+					 msi_alloc_info_t *arg)
+{
+	return arg->msi_hwirq;
 }
 
-static int
-msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
+static int pci_msi_prepare(struct irq_domain *domain, struct device *dev,
+			   int nvec, msi_alloc_info_t *arg)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	struct msi_msg msg;
-	unsigned int dest;
-	int ret;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct msi_desc *desc = first_pci_msi_entry(pdev);
+
+	init_irq_alloc_info(arg, NULL);
+	arg->msi_dev = pdev;
+	if (desc->msi_attrib.is_msix) {
+		arg->type = X86_IRQ_ALLOC_TYPE_MSIX;
+	} else {
+		arg->type = X86_IRQ_ALLOC_TYPE_MSI;
+		arg->flags |= X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
+	}
 
-	ret = apic_set_affinity(data, mask, &dest);
-	if (ret)
-		return ret;
+	return 0;
+}
 
-	__get_cached_msi_msg(data->msi_desc, &msg);
+static void pci_msi_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
+{
+	arg->msi_hwirq = pci_msi_domain_calc_hwirq(arg->msi_dev, desc);
+}
+
+static struct msi_domain_ops pci_msi_domain_ops = {
+	.get_hwirq	= pci_msi_get_hwirq,
+	.msi_prepare	= pci_msi_prepare,
+	.set_desc	= pci_msi_set_desc,
+};
 
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+static struct msi_domain_info pci_msi_domain_info = {
+	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+			  MSI_FLAG_PCI_MSIX,
+	.ops		= &pci_msi_domain_ops,
+	.chip		= &pci_msi_controller,
+	.handler	= handle_edge_irq,
+	.handler_name	= "edge",
+};
 
-	__pci_write_msi_msg(data->msi_desc, &msg);
+void arch_init_msi_domain(struct irq_domain *parent)
+{
+	if (disable_apic)
+		return;
 
-	return IRQ_SET_MASK_OK_NOCOPY;
+	msi_default_domain = pci_msi_create_irq_domain(NULL,
+					&pci_msi_domain_info, parent);
+	if (!msi_default_domain)
+		pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n");
 }
 
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
- */
-static struct irq_chip msi_chip = {
-	.name			= "PCI-MSI",
+#ifdef CONFIG_IRQ_REMAP
+static struct irq_chip pci_msi_ir_controller = {
+	.name			= "IR-PCI-MSI",
 	.irq_unmask		= pci_msi_unmask_irq,
 	.irq_mask		= pci_msi_mask_irq,
-	.irq_ack		= apic_ack_edge,
-	.irq_set_affinity	= msi_set_affinity,
-	.irq_retrigger		= apic_retrigger_irq,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_set_vcpu_affinity	= irq_chip_set_vcpu_affinity_parent,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
-int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
-		  unsigned int irq_base, unsigned int irq_offset)
-{
-	struct irq_chip *chip = &msi_chip;
-	struct msi_msg msg;
-	unsigned int irq = irq_base + irq_offset;
-	int ret;
-
-	ret = msi_compose_msg(dev, irq, &msg, -1);
-	if (ret < 0)
-		return ret;
-
-	irq_set_msi_desc_off(irq_base, irq_offset, msidesc);
-
-	/*
-	 * MSI-X message is written per-IRQ, the offset is always 0.
-	 * MSI message denotes a contiguous group of IRQs, written for 0th IRQ.
-	 */
-	if (!irq_offset)
-		pci_write_msi_msg(irq, &msg);
+static struct msi_domain_info pci_msi_ir_domain_info = {
+	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+			  MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
+	.ops		= &pci_msi_domain_ops,
+	.chip		= &pci_msi_ir_controller,
+	.handler	= handle_edge_irq,
+	.handler_name	= "edge",
+};
 
-	setup_remapped_irq(irq, irq_cfg(irq), chip);
+struct irq_domain *arch_create_msi_irq_domain(struct irq_domain *parent)
+{
+	return pci_msi_create_irq_domain(NULL, &pci_msi_ir_domain_info, parent);
+}
+#endif
 
-	irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
+#ifdef CONFIG_DMAR_TABLE
+static void dmar_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	dmar_msi_write(data->irq, msg);
+}
 
-	dev_dbg(&dev->dev, "irq %d for MSI/MSI-X\n", irq);
+static struct irq_chip dmar_msi_controller = {
+	.name			= "DMAR-MSI",
+	.irq_unmask		= dmar_msi_unmask,
+	.irq_mask		= dmar_msi_mask,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_set_affinity	= msi_domain_set_affinity,
+	.irq_retrigger		= irq_chip_retrigger_hierarchy,
+	.irq_compose_msi_msg	= irq_msi_compose_msg,
+	.irq_write_msi_msg	= dmar_msi_write_msg,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
+};
 
-	return 0;
+static irq_hw_number_t dmar_msi_get_hwirq(struct msi_domain_info *info,
+					  msi_alloc_info_t *arg)
+{
+	return arg->dmar_id;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int dmar_msi_init(struct irq_domain *domain,
+			 struct msi_domain_info *info, unsigned int virq,
+			 irq_hw_number_t hwirq, msi_alloc_info_t *arg)
 {
-	struct msi_desc *msidesc;
-	unsigned int irq;
-	int node, ret;
+	irq_domain_set_info(domain, virq, arg->dmar_id, info->chip, NULL,
+			    handle_edge_irq, arg->dmar_data, "edge");
 
-	/* Multiple MSI vectors only supported with interrupt remapping */
-	if (type == PCI_CAP_ID_MSI && nvec > 1)
-		return 1;
+	return 0;
+}
 
-	node = dev_to_node(&dev->dev);
+static struct msi_domain_ops dmar_msi_domain_ops = {
+	.get_hwirq	= dmar_msi_get_hwirq,
+	.msi_init	= dmar_msi_init,
+};
 
-	list_for_each_entry(msidesc, &dev->msi_list, list) {
-		irq = irq_alloc_hwirq(node);
-		if (!irq)
-			return -ENOSPC;
+static struct msi_domain_info dmar_msi_domain_info = {
+	.ops		= &dmar_msi_domain_ops,
+	.chip		= &dmar_msi_controller,
+};
 
-		ret = setup_msi_irq(dev, msidesc, irq, 0);
-		if (ret < 0) {
-			irq_free_hwirq(irq);
-			return ret;
-		}
+static struct irq_domain *dmar_get_irq_domain(void)
+{
+	static struct irq_domain *dmar_domain;
+	static DEFINE_MUTEX(dmar_lock);
 
-	}
-	return 0;
-}
+	mutex_lock(&dmar_lock);
+	if (dmar_domain == NULL)
+		dmar_domain = msi_create_irq_domain(NULL, &dmar_msi_domain_info,
+						    x86_vector_domain);
+	mutex_unlock(&dmar_lock);
 
-void native_teardown_msi_irq(unsigned int irq)
-{
-	irq_free_hwirq(irq);
+	return dmar_domain;
 }
 
-#ifdef CONFIG_DMAR_TABLE
-static int
-dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
-		      bool force)
+int dmar_alloc_hwirq(int id, int node, void *arg)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	unsigned int dest, irq = data->irq;
-	struct msi_msg msg;
-	int ret;
-
-	ret = apic_set_affinity(data, mask, &dest);
-	if (ret)
-		return ret;
+	struct irq_domain *domain = dmar_get_irq_domain();
+	struct irq_alloc_info info;
 
-	dmar_msi_read(irq, &msg);
+	if (!domain)
+		return -1;
 
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-	msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
+	init_irq_alloc_info(&info, NULL);
+	info.type = X86_IRQ_ALLOC_TYPE_DMAR;
+	info.dmar_id = id;
+	info.dmar_data = arg;
 
-	dmar_msi_write(irq, &msg);
-
-	return IRQ_SET_MASK_OK_NOCOPY;
+	return irq_domain_alloc_irqs(domain, 1, node, &info);
 }
 
-static struct irq_chip dmar_msi_type = {
-	.name			= "DMAR_MSI",
-	.irq_unmask		= dmar_msi_unmask,
-	.irq_mask		= dmar_msi_mask,
-	.irq_ack		= apic_ack_edge,
-	.irq_set_affinity	= dmar_msi_set_affinity,
-	.irq_retrigger		= apic_retrigger_irq,
-	.flags			= IRQCHIP_SKIP_SET_WAKE,
-};
-
-int arch_setup_dmar_msi(unsigned int irq)
+void dmar_free_hwirq(int irq)
 {
-	int ret;
-	struct msi_msg msg;
-
-	ret = msi_compose_msg(NULL, irq, &msg, -1);
-	if (ret < 0)
-		return ret;
-	dmar_msi_write(irq, &msg);
-	irq_set_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq,
-				      "edge");
-	return 0;
+	irq_domain_free_irqs(irq, 1);
 }
 #endif
 
@@ -231,56 +255,103 @@ int arch_setup_dmar_msi(unsigned int irq)
  * MSI message composition
  */
 #ifdef CONFIG_HPET_TIMER
+static inline int hpet_dev_id(struct irq_domain *domain)
+{
+	struct msi_domain_info *info = msi_get_domain_info(domain);
+
+	return (int)(long)info->data;
+}
 
-static int hpet_msi_set_affinity(struct irq_data *data,
-				 const struct cpumask *mask, bool force)
+static void hpet_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	struct msi_msg msg;
-	unsigned int dest;
-	int ret;
+	hpet_msi_write(data->handler_data, msg);
+}
 
-	ret = apic_set_affinity(data, mask, &dest);
-	if (ret)
-		return ret;
+static struct irq_chip hpet_msi_controller = {
+	.name = "HPET-MSI",
+	.irq_unmask = hpet_msi_unmask,
+	.irq_mask = hpet_msi_mask,
+	.irq_ack = irq_chip_ack_parent,
+	.irq_set_affinity = msi_domain_set_affinity,
+	.irq_retrigger = irq_chip_retrigger_hierarchy,
+	.irq_compose_msi_msg = irq_msi_compose_msg,
+	.irq_write_msi_msg = hpet_msi_write_msg,
+	.flags = IRQCHIP_SKIP_SET_WAKE,
+};
 
-	hpet_msi_read(data->handler_data, &msg);
+static irq_hw_number_t hpet_msi_get_hwirq(struct msi_domain_info *info,
+					  msi_alloc_info_t *arg)
+{
+	return arg->hpet_index;
+}
 
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+static int hpet_msi_init(struct irq_domain *domain,
+			 struct msi_domain_info *info, unsigned int virq,
+			 irq_hw_number_t hwirq, msi_alloc_info_t *arg)
+{
+	irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
+	irq_domain_set_info(domain, virq, arg->hpet_index, info->chip, NULL,
+			    handle_edge_irq, arg->hpet_data, "edge");
 
-	hpet_msi_write(data->handler_data, &msg);
+	return 0;
+}
 
-	return IRQ_SET_MASK_OK_NOCOPY;
+static void hpet_msi_free(struct irq_domain *domain,
+			  struct msi_domain_info *info, unsigned int virq)
+{
+	irq_clear_status_flags(virq, IRQ_MOVE_PCNTXT);
 }
 
-static struct irq_chip hpet_msi_type = {
-	.name = "HPET_MSI",
-	.irq_unmask = hpet_msi_unmask,
-	.irq_mask = hpet_msi_mask,
-	.irq_ack = apic_ack_edge,
-	.irq_set_affinity = hpet_msi_set_affinity,
-	.irq_retrigger = apic_retrigger_irq,
-	.flags = IRQCHIP_SKIP_SET_WAKE,
+static struct msi_domain_ops hpet_msi_domain_ops = {
+	.get_hwirq	= hpet_msi_get_hwirq,
+	.msi_init	= hpet_msi_init,
+	.msi_free	= hpet_msi_free,
+};
+
+static struct msi_domain_info hpet_msi_domain_info = {
+	.ops		= &hpet_msi_domain_ops,
+	.chip		= &hpet_msi_controller,
 };
 
-int default_setup_hpet_msi(unsigned int irq, unsigned int id)
+struct irq_domain *hpet_create_irq_domain(int hpet_id)
 {
-	struct irq_chip *chip = &hpet_msi_type;
-	struct msi_msg msg;
-	int ret;
+	struct irq_domain *parent;
+	struct irq_alloc_info info;
+	struct msi_domain_info *domain_info;
+
+	if (x86_vector_domain == NULL)
+		return NULL;
+
+	domain_info = kzalloc(sizeof(*domain_info), GFP_KERNEL);
+	if (!domain_info)
+		return NULL;
+
+	*domain_info = hpet_msi_domain_info;
+	domain_info->data = (void *)(long)hpet_id;
+
+	init_irq_alloc_info(&info, NULL);
+	info.type = X86_IRQ_ALLOC_TYPE_HPET;
+	info.hpet_id = hpet_id;
+	parent = irq_remapping_get_ir_irq_domain(&info);
+	if (parent == NULL)
+		parent = x86_vector_domain;
+	else
+		hpet_msi_controller.name = "IR-HPET-MSI";
+
+	return msi_create_irq_domain(NULL, domain_info, parent);
+}
 
-	ret = msi_compose_msg(NULL, irq, &msg, id);
-	if (ret < 0)
-		return ret;
+int hpet_assign_irq(struct irq_domain *domain, struct hpet_dev *dev,
+		    int dev_num)
+{
+	struct irq_alloc_info info;
 
-	hpet_msi_write(irq_get_handler_data(irq), &msg);
-	irq_set_status_flags(irq, IRQ_MOVE_PCNTXT);
-	setup_remapped_irq(irq, irq_cfg(irq), chip);
+	init_irq_alloc_info(&info, NULL);
+	info.type = X86_IRQ_ALLOC_TYPE_HPET;
+	info.hpet_data = dev;
+	info.hpet_id = hpet_dev_id(domain);
+	info.hpet_index = dev_num;
 
-	irq_set_chip_and_handler_name(irq, chip, handle_edge_irq, "edge");
-	return 0;
+	return irq_domain_alloc_irqs(domain, 1, NUMA_NO_NODE, &info);
 }
 #endif
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 6cedd7914581..28eba2d38b15 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo
  *	Moved from arch/x86/kernel/apic/io_apic.c.
+ * Jiang Liu <jiang.liu@linux.intel.com>
+ *	Enable support of hierarchical irqdomains
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,15 +13,28 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/compiler.h>
-#include <linux/irqdomain.h>
 #include <linux/slab.h>
+#include <asm/irqdomain.h>
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
 #include <asm/i8259.h>
 #include <asm/desc.h>
 #include <asm/irq_remapping.h>
 
+struct apic_chip_data {
+	struct irq_cfg		cfg;
+	cpumask_var_t		domain;
+	cpumask_var_t		old_domain;
+	u8			move_in_progress : 1;
+};
+
+struct irq_domain *x86_vector_domain;
 static DEFINE_RAW_SPINLOCK(vector_lock);
+static cpumask_var_t vector_cpumask;
+static struct irq_chip lapic_controller;
+#ifdef	CONFIG_X86_IO_APIC
+static struct apic_chip_data *legacy_irq_data[NR_IRQS_LEGACY];
+#endif
 
 void lock_vector_lock(void)
 {
@@ -34,71 +49,59 @@ void unlock_vector_lock(void)
 	raw_spin_unlock(&vector_lock);
 }
 
-struct irq_cfg *irq_cfg(unsigned int irq)
+static struct apic_chip_data *apic_chip_data(struct irq_data *irq_data)
 {
-	return irq_get_chip_data(irq);
+	if (!irq_data)
+		return NULL;
+
+	while (irq_data->parent_data)
+		irq_data = irq_data->parent_data;
+
+	return irq_data->chip_data;
 }
 
 struct irq_cfg *irqd_cfg(struct irq_data *irq_data)
 {
-	return irq_data->chip_data;
+	struct apic_chip_data *data = apic_chip_data(irq_data);
+
+	return data ? &data->cfg : NULL;
 }
 
-static struct irq_cfg *alloc_irq_cfg(unsigned int irq, int node)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
-	struct irq_cfg *cfg;
+	return irqd_cfg(irq_get_irq_data(irq));
+}
 
-	cfg = kzalloc_node(sizeof(*cfg), GFP_KERNEL, node);
-	if (!cfg)
+static struct apic_chip_data *alloc_apic_chip_data(int node)
+{
+	struct apic_chip_data *data;
+
+	data = kzalloc_node(sizeof(*data), GFP_KERNEL, node);
+	if (!data)
 		return NULL;
-	if (!zalloc_cpumask_var_node(&cfg->domain, GFP_KERNEL, node))
-		goto out_cfg;
-	if (!zalloc_cpumask_var_node(&cfg->old_domain, GFP_KERNEL, node))
+	if (!zalloc_cpumask_var_node(&data->domain, GFP_KERNEL, node))
+		goto out_data;
+	if (!zalloc_cpumask_var_node(&data->old_domain, GFP_KERNEL, node))
 		goto out_domain;
-#ifdef	CONFIG_X86_IO_APIC
-	INIT_LIST_HEAD(&cfg->irq_2_pin);
-#endif
-	return cfg;
+	return data;
 out_domain:
-	free_cpumask_var(cfg->domain);
-out_cfg:
-	kfree(cfg);
+	free_cpumask_var(data->domain);
+out_data:
+	kfree(data);
 	return NULL;
 }
 
-struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node)
+static void free_apic_chip_data(struct apic_chip_data *data)
 {
-	int res = irq_alloc_desc_at(at, node);
-	struct irq_cfg *cfg;
-
-	if (res < 0) {
-		if (res != -EEXIST)
-			return NULL;
-		cfg = irq_cfg(at);
-		if (cfg)
-			return cfg;
+	if (data) {
+		free_cpumask_var(data->domain);
+		free_cpumask_var(data->old_domain);
+		kfree(data);
 	}
-
-	cfg = alloc_irq_cfg(at, node);
-	if (cfg)
-		irq_set_chip_data(at, cfg);
-	else
-		irq_free_desc(at);
-	return cfg;
-}
-
-static void free_irq_cfg(unsigned int at, struct irq_cfg *cfg)
-{
-	if (!cfg)
-		return;
-	irq_set_chip_data(at, NULL);
-	free_cpumask_var(cfg->domain);
-	free_cpumask_var(cfg->old_domain);
-	kfree(cfg);
 }
 
-static int
-__assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+static int __assign_irq_vector(int irq, struct apic_chip_data *d,
+			       const struct cpumask *mask)
 {
 	/*
 	 * NOTE! The local APIC isn't very good at handling
@@ -114,36 +117,33 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 	static int current_vector = FIRST_EXTERNAL_VECTOR + VECTOR_OFFSET_START;
 	static int current_offset = VECTOR_OFFSET_START % 16;
 	int cpu, err;
-	cpumask_var_t tmp_mask;
 
-	if (cfg->move_in_progress)
+	if (d->move_in_progress)
 		return -EBUSY;
 
-	if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
-		return -ENOMEM;
-
 	/* Only try and allocate irqs on cpus that are present */
 	err = -ENOSPC;
-	cpumask_clear(cfg->old_domain);
+	cpumask_clear(d->old_domain);
 	cpu = cpumask_first_and(mask, cpu_online_mask);
 	while (cpu < nr_cpu_ids) {
 		int new_cpu, vector, offset;
 
-		apic->vector_allocation_domain(cpu, tmp_mask, mask);
+		apic->vector_allocation_domain(cpu, vector_cpumask, mask);
 
-		if (cpumask_subset(tmp_mask, cfg->domain)) {
+		if (cpumask_subset(vector_cpumask, d->domain)) {
 			err = 0;
-			if (cpumask_equal(tmp_mask, cfg->domain))
+			if (cpumask_equal(vector_cpumask, d->domain))
 				break;
 			/*
 			 * New cpumask using the vector is a proper subset of
 			 * the current in use mask. So cleanup the vector
 			 * allocation for the members that are not used anymore.
 			 */
-			cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask);
-			cfg->move_in_progress =
-			   cpumask_intersects(cfg->old_domain, cpu_online_mask);
-			cpumask_and(cfg->domain, cfg->domain, tmp_mask);
+			cpumask_andnot(d->old_domain, d->domain,
+				       vector_cpumask);
+			d->move_in_progress =
+			   cpumask_intersects(d->old_domain, cpu_online_mask);
+			cpumask_and(d->domain, d->domain, vector_cpumask);
 			break;
 		}
 
@@ -157,16 +157,18 @@ next:
 		}
 
 		if (unlikely(current_vector == vector)) {
-			cpumask_or(cfg->old_domain, cfg->old_domain, tmp_mask);
-			cpumask_andnot(tmp_mask, mask, cfg->old_domain);
-			cpu = cpumask_first_and(tmp_mask, cpu_online_mask);
+			cpumask_or(d->old_domain, d->old_domain,
+				   vector_cpumask);
+			cpumask_andnot(vector_cpumask, mask, d->old_domain);
+			cpu = cpumask_first_and(vector_cpumask,
+						cpu_online_mask);
 			continue;
 		}
 
 		if (test_bit(vector, used_vectors))
 			goto next;
 
-		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask) {
+		for_each_cpu_and(new_cpu, vector_cpumask, cpu_online_mask) {
 			if (per_cpu(vector_irq, new_cpu)[vector] >
 			    VECTOR_UNDEFINED)
 				goto next;
@@ -174,55 +176,73 @@ next:
 		/* Found one! */
 		current_vector = vector;
 		current_offset = offset;
-		if (cfg->vector) {
-			cpumask_copy(cfg->old_domain, cfg->domain);
-			cfg->move_in_progress =
-			   cpumask_intersects(cfg->old_domain, cpu_online_mask);
+		if (d->cfg.vector) {
+			cpumask_copy(d->old_domain, d->domain);
+			d->move_in_progress =
+			   cpumask_intersects(d->old_domain, cpu_online_mask);
 		}
-		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
+		for_each_cpu_and(new_cpu, vector_cpumask, cpu_online_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;
-		cfg->vector = vector;
-		cpumask_copy(cfg->domain, tmp_mask);
+		d->cfg.vector = vector;
+		cpumask_copy(d->domain, vector_cpumask);
 		err = 0;
 		break;
 	}
-	free_cpumask_var(tmp_mask);
+
+	if (!err) {
+		/* cache destination APIC IDs into cfg->dest_apicid */
+		err = apic->cpu_mask_to_apicid_and(mask, d->domain,
+						   &d->cfg.dest_apicid);
+	}
 
 	return err;
 }
 
-int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+static int assign_irq_vector(int irq, struct apic_chip_data *data,
+			     const struct cpumask *mask)
 {
 	int err;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&vector_lock, flags);
-	err = __assign_irq_vector(irq, cfg, mask);
+	err = __assign_irq_vector(irq, data, mask);
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
 	return err;
 }
 
-void clear_irq_vector(int irq, struct irq_cfg *cfg)
+static int assign_irq_vector_policy(int irq, int node,
+				    struct apic_chip_data *data,
+				    struct irq_alloc_info *info)
+{
+	if (info && info->mask)
+		return assign_irq_vector(irq, data, info->mask);
+	if (node != NUMA_NO_NODE &&
+	    assign_irq_vector(irq, data, cpumask_of_node(node)) == 0)
+		return 0;
+	return assign_irq_vector(irq, data, apic->target_cpus());
+}
+
+static void clear_irq_vector(int irq, struct apic_chip_data *data)
 {
 	int cpu, vector;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&vector_lock, flags);
-	BUG_ON(!cfg->vector);
+	BUG_ON(!data->cfg.vector);
 
-	vector = cfg->vector;
-	for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
+	vector = data->cfg.vector;
+	for_each_cpu_and(cpu, data->domain, cpu_online_mask)
 		per_cpu(vector_irq, cpu)[vector] = VECTOR_UNDEFINED;
 
-	cfg->vector = 0;
-	cpumask_clear(cfg->domain);
+	data->cfg.vector = 0;
+	cpumask_clear(data->domain);
 
-	if (likely(!cfg->move_in_progress)) {
+	if (likely(!data->move_in_progress)) {
 		raw_spin_unlock_irqrestore(&vector_lock, flags);
 		return;
 	}
 
-	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
+	for_each_cpu_and(cpu, data->old_domain, cpu_online_mask) {
 		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
 		     vector++) {
 			if (per_cpu(vector_irq, cpu)[vector] != irq)
@@ -231,10 +251,95 @@ void clear_irq_vector(int irq, struct irq_cfg *cfg)
 			break;
 		}
 	}
-	cfg->move_in_progress = 0;
+	data->move_in_progress = 0;
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
 }
 
+void init_irq_alloc_info(struct irq_alloc_info *info,
+			 const struct cpumask *mask)
+{
+	memset(info, 0, sizeof(*info));
+	info->mask = mask;
+}
+
+void copy_irq_alloc_info(struct irq_alloc_info *dst, struct irq_alloc_info *src)
+{
+	if (src)
+		*dst = *src;
+	else
+		memset(dst, 0, sizeof(*dst));
+}
+
+static void x86_vector_free_irqs(struct irq_domain *domain,
+				 unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *irq_data;
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(x86_vector_domain, virq + i);
+		if (irq_data && irq_data->chip_data) {
+			clear_irq_vector(virq + i, irq_data->chip_data);
+			free_apic_chip_data(irq_data->chip_data);
+#ifdef	CONFIG_X86_IO_APIC
+			if (virq + i < nr_legacy_irqs())
+				legacy_irq_data[virq + i] = NULL;
+#endif
+			irq_domain_reset_irq_data(irq_data);
+		}
+	}
+}
+
+static int x86_vector_alloc_irqs(struct irq_domain *domain, unsigned int virq,
+				 unsigned int nr_irqs, void *arg)
+{
+	struct irq_alloc_info *info = arg;
+	struct apic_chip_data *data;
+	struct irq_data *irq_data;
+	int i, err;
+
+	if (disable_apic)
+		return -ENXIO;
+
+	/* Currently vector allocator can't guarantee contiguous allocations */
+	if ((info->flags & X86_IRQ_ALLOC_CONTIGUOUS_VECTORS) && nr_irqs > 1)
+		return -ENOSYS;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_data = irq_domain_get_irq_data(domain, virq + i);
+		BUG_ON(!irq_data);
+#ifdef	CONFIG_X86_IO_APIC
+		if (virq + i < nr_legacy_irqs() && legacy_irq_data[virq + i])
+			data = legacy_irq_data[virq + i];
+		else
+#endif
+			data = alloc_apic_chip_data(irq_data->node);
+		if (!data) {
+			err = -ENOMEM;
+			goto error;
+		}
+
+		irq_data->chip = &lapic_controller;
+		irq_data->chip_data = data;
+		irq_data->hwirq = virq + i;
+		err = assign_irq_vector_policy(virq, irq_data->node, data,
+					       info);
+		if (err)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	x86_vector_free_irqs(domain, virq, i + 1);
+	return err;
+}
+
+static const struct irq_domain_ops x86_vector_domain_ops = {
+	.alloc	= x86_vector_alloc_irqs,
+	.free	= x86_vector_free_irqs,
+};
+
 int __init arch_probe_nr_irqs(void)
 {
 	int nr;
@@ -258,8 +363,43 @@ int __init arch_probe_nr_irqs(void)
 	return nr_legacy_irqs();
 }
 
+#ifdef	CONFIG_X86_IO_APIC
+static void init_legacy_irqs(void)
+{
+	int i, node = cpu_to_node(0);
+	struct apic_chip_data *data;
+
+	/*
+	 * For legacy IRQ's, start with assigning irq0 to irq15 to
+	 * ISA_IRQ_VECTOR(i) for all cpu's.
+	 */
+	for (i = 0; i < nr_legacy_irqs(); i++) {
+		data = legacy_irq_data[i] = alloc_apic_chip_data(node);
+		BUG_ON(!data);
+
+		data->cfg.vector = ISA_IRQ_VECTOR(i);
+		cpumask_setall(data->domain);
+		irq_set_chip_data(i, data);
+	}
+}
+#else
+static void init_legacy_irqs(void) { }
+#endif
+
 int __init arch_early_irq_init(void)
 {
+	init_legacy_irqs();
+
+	x86_vector_domain = irq_domain_add_tree(NULL, &x86_vector_domain_ops,
+						NULL);
+	BUG_ON(x86_vector_domain == NULL);
+	irq_set_default_host(x86_vector_domain);
+
+	arch_init_msi_domain(x86_vector_domain);
+	arch_init_htirq_domain(x86_vector_domain);
+
+	BUG_ON(!alloc_cpumask_var(&vector_cpumask, GFP_KERNEL));
+
 	return arch_early_ioapic_init();
 }
 
@@ -267,7 +407,7 @@ static void __setup_vector_irq(int cpu)
 {
 	/* Initialize vector_irq on a new cpu */
 	int irq, vector;
-	struct irq_cfg *cfg;
+	struct apic_chip_data *data;
 
 	/*
 	 * vector_lock will make sure that we don't run into irq vector
@@ -277,13 +417,13 @@ static void __setup_vector_irq(int cpu)
 	raw_spin_lock(&vector_lock);
 	/* Mark the inuse vectors */
 	for_each_active_irq(irq) {
-		cfg = irq_cfg(irq);
-		if (!cfg)
+		data = apic_chip_data(irq_get_irq_data(irq));
+		if (!data)
 			continue;
 
-		if (!cpumask_test_cpu(cpu, cfg->domain))
+		if (!cpumask_test_cpu(cpu, data->domain))
 			continue;
-		vector = cfg->vector;
+		vector = data->cfg.vector;
 		per_cpu(vector_irq, cpu)[vector] = irq;
 	}
 	/* Mark the free vectors */
@@ -292,8 +432,8 @@ static void __setup_vector_irq(int cpu)
 		if (irq <= VECTOR_UNDEFINED)
 			continue;
 
-		cfg = irq_cfg(irq);
-		if (!cpumask_test_cpu(cpu, cfg->domain))
+		data = apic_chip_data(irq_get_irq_data(irq));
+		if (!cpumask_test_cpu(cpu, data->domain))
 			per_cpu(vector_irq, cpu)[vector] = VECTOR_UNDEFINED;
 	}
 	raw_spin_unlock(&vector_lock);
@@ -314,20 +454,20 @@ void setup_vector_irq(int cpu)
 	 * legacy vector to irq mapping:
 	 */
 	for (irq = 0; irq < nr_legacy_irqs(); irq++)
-		per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
+		per_cpu(vector_irq, cpu)[ISA_IRQ_VECTOR(irq)] = irq;
 
 	__setup_vector_irq(cpu);
 }
 
-int apic_retrigger_irq(struct irq_data *data)
+static int apic_retrigger_irq(struct irq_data *irq_data)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
+	struct apic_chip_data *data = apic_chip_data(irq_data);
 	unsigned long flags;
 	int cpu;
 
 	raw_spin_lock_irqsave(&vector_lock, flags);
-	cpu = cpumask_first_and(cfg->domain, cpu_online_mask);
-	apic->send_IPI_mask(cpumask_of(cpu), cfg->vector);
+	cpu = cpumask_first_and(data->domain, cpu_online_mask);
+	apic->send_IPI_mask(cpumask_of(cpu), data->cfg.vector);
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
@@ -340,73 +480,76 @@ void apic_ack_edge(struct irq_data *data)
 	ack_APIC_irq();
 }
 
-/*
- * Either sets data->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that in dest_id, or returns -1 and
- * leaves data->affinity untouched.
- */
-int apic_set_affinity(struct irq_data *data, const struct cpumask *mask,
-		      unsigned int *dest_id)
+static int apic_set_affinity(struct irq_data *irq_data,
+			     const struct cpumask *dest, bool force)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	unsigned int irq = data->irq;
-	int err;
+	struct apic_chip_data *data = irq_data->chip_data;
+	int err, irq = irq_data->irq;
 
 	if (!config_enabled(CONFIG_SMP))
 		return -EPERM;
 
-	if (!cpumask_intersects(mask, cpu_online_mask))
+	if (!cpumask_intersects(dest, cpu_online_mask))
 		return -EINVAL;
 
-	err = assign_irq_vector(irq, cfg, mask);
-	if (err)
-		return err;
-
-	err = apic->cpu_mask_to_apicid_and(mask, cfg->domain, dest_id);
+	err = assign_irq_vector(irq, data, dest);
 	if (err) {
-		if (assign_irq_vector(irq, cfg, data->affinity))
+		struct irq_data *top = irq_get_irq_data(irq);
+
+		if (assign_irq_vector(irq, data, top->affinity))
 			pr_err("Failed to recover vector for irq %d\n", irq);
 		return err;
 	}
 
-	cpumask_copy(data->affinity, mask);
-
-	return 0;
+	return IRQ_SET_MASK_OK;
 }
 
+static struct irq_chip lapic_controller = {
+	.irq_ack		= apic_ack_edge,
+	.irq_set_affinity	= apic_set_affinity,
+	.irq_retrigger		= apic_retrigger_irq,
+};
+
 #ifdef CONFIG_SMP
-void send_cleanup_vector(struct irq_cfg *cfg)
+static void __send_cleanup_vector(struct apic_chip_data *data)
 {
 	cpumask_var_t cleanup_mask;
 
 	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
 		unsigned int i;
 
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+		for_each_cpu_and(i, data->old_domain, cpu_online_mask)
 			apic->send_IPI_mask(cpumask_of(i),
 					    IRQ_MOVE_CLEANUP_VECTOR);
 	} else {
-		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+		cpumask_and(cleanup_mask, data->old_domain, cpu_online_mask);
 		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
 		free_cpumask_var(cleanup_mask);
 	}
-	cfg->move_in_progress = 0;
+	data->move_in_progress = 0;
+}
+
+void send_cleanup_vector(struct irq_cfg *cfg)
+{
+	struct apic_chip_data *data;
+
+	data = container_of(cfg, struct apic_chip_data, cfg);
+	if (data->move_in_progress)
+		__send_cleanup_vector(data);
 }
 
 asmlinkage __visible void smp_irq_move_cleanup_interrupt(void)
 {
 	unsigned vector, me;
 
-	ack_APIC_irq();
-	irq_enter();
-	exit_idle();
+	entering_ack_irq();
 
 	me = smp_processor_id();
 	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
 		int irq;
 		unsigned int irr;
 		struct irq_desc *desc;
-		struct irq_cfg *cfg;
+		struct apic_chip_data *data;
 
 		irq = __this_cpu_read(vector_irq[vector]);
 
@@ -417,8 +560,8 @@ asmlinkage __visible void smp_irq_move_cleanup_interrupt(void)
 		if (!desc)
 			continue;
 
-		cfg = irq_cfg(irq);
-		if (!cfg)
+		data = apic_chip_data(&desc->irq_data);
+		if (!data)
 			continue;
 
 		raw_spin_lock(&desc->lock);
@@ -427,10 +570,11 @@ asmlinkage __visible void smp_irq_move_cleanup_interrupt(void)
 		 * Check if the irq migration is in progress. If so, we
 		 * haven't received the cleanup request yet for this irq.
 		 */
-		if (cfg->move_in_progress)
+		if (data->move_in_progress)
 			goto unlock;
 
-		if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
+		if (vector == data->cfg.vector &&
+		    cpumask_test_cpu(me, data->domain))
 			goto unlock;
 
 		irr = apic_read(APIC_IRR + (vector / 32 * 0x10));
@@ -450,20 +594,21 @@ unlock:
 		raw_spin_unlock(&desc->lock);
 	}
 
-	irq_exit();
+	exiting_irq();
 }
 
 static void __irq_complete_move(struct irq_cfg *cfg, unsigned vector)
 {
 	unsigned me;
+	struct apic_chip_data *data;
 
-	if (likely(!cfg->move_in_progress))
+	data = container_of(cfg, struct apic_chip_data, cfg);
+	if (likely(!data->move_in_progress))
 		return;
 
 	me = smp_processor_id();
-
-	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
-		send_cleanup_vector(cfg);
+	if (vector == data->cfg.vector && cpumask_test_cpu(me, data->domain))
+		__send_cleanup_vector(data);
 }
 
 void irq_complete_move(struct irq_cfg *cfg)
@@ -475,46 +620,11 @@ void irq_force_complete_move(int irq)
 {
 	struct irq_cfg *cfg = irq_cfg(irq);
 
-	if (!cfg)
-		return;
-
-	__irq_complete_move(cfg, cfg->vector);
+	if (cfg)
+		__irq_complete_move(cfg, cfg->vector);
 }
 #endif
 
-/*
- * Dynamic irq allocate and deallocation. Should be replaced by irq domains!
- */
-int arch_setup_hwirq(unsigned int irq, int node)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	int ret;
-
-	cfg = alloc_irq_cfg(irq, node);
-	if (!cfg)
-		return -ENOMEM;
-
-	raw_spin_lock_irqsave(&vector_lock, flags);
-	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
-	raw_spin_unlock_irqrestore(&vector_lock, flags);
-
-	if (!ret)
-		irq_set_chip_data(irq, cfg);
-	else
-		free_irq_cfg(irq, cfg);
-	return ret;
-}
-
-void arch_teardown_hwirq(unsigned int irq)
-{
-	struct irq_cfg *cfg = irq_cfg(irq);
-
-	free_remapped_irq(irq);
-	clear_irq_vector(irq, cfg);
-	free_irq_cfg(irq, cfg);
-}
-
 static void __init print_APIC_field(int base)
 {
 	int i;
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 6fae733e9194..3ffd925655e0 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -21,11 +21,13 @@ early_param("x2apic_phys", set_x2apic_phys_mode);
 
 static bool x2apic_fadt_phys(void)
 {
+#ifdef CONFIG_ACPI
 	if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
 		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
 		printk(KERN_DEBUG "System requires x2apic physical mode\n");
 		return true;
 	}
+#endif
 	return false;
 }
 
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index b27f6ec90caa..8e3d22a1af94 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -68,7 +68,9 @@ void common(void) {
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
+#ifdef CONFIG_X86_32
 	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
+#endif
 	OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
 	OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2);
 #endif
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index dcaab87da629..d8f42f902a0f 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -66,7 +66,7 @@ int main(void)
 	DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1);
 	DEFINE(NR_syscalls, sizeof(syscalls_64));
 
-	DEFINE(__NR_ia32_syscall_max, sizeof(syscalls_ia32) - 1);
+	DEFINE(__NR_syscall_compat_max, sizeof(syscalls_ia32) - 1);
 	DEFINE(IA32_NR_syscalls, sizeof(syscalls_ia32));
 
 	return 0;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 56cae1964a81..dd3a4baffe50 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -295,7 +295,7 @@ static int nearby_node(int apicid)
  *     Assumption: Number of cores in each internal node is the same.
  * (2) AMD processors supporting compute units
  */
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 static void amd_get_topology(struct cpuinfo_x86 *c)
 {
 	u32 cores_per_cu = 1;
@@ -348,7 +348,7 @@ static void amd_get_topology(struct cpuinfo_x86 *c)
  */
 static void amd_detect_cmp(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 	unsigned bits;
 	int cpu = smp_processor_id();
 
@@ -433,7 +433,7 @@ static void srat_detect_node(struct cpuinfo_x86 *c)
 
 static void early_init_amd_mc(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 	unsigned bits, ecx;
 
 	/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b28e5262a0a5..9fc5e3d9d9c8 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -491,7 +491,7 @@ static void cpu_detect_tlb(struct cpuinfo_x86 *c)
 
 void detect_ht(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 	u32 eax, ebx, ecx, edx;
 	int index_msb, core_bits;
 	static bool printed;
@@ -827,7 +827,7 @@ static void generic_identify(struct cpuinfo_x86 *c)
 	if (c->cpuid_level >= 0x00000001) {
 		c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
 #ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_HT
+# ifdef CONFIG_SMP
 		c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
 # else
 		c->apicid = c->initial_apicid;
@@ -1009,7 +1009,7 @@ void enable_sep_cpu(void)
 	      (unsigned long)tss + offsetofend(struct tss_struct, SYSENTER_stack),
 	      0);
 
-	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)ia32_sysenter_target, 0);
+	wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long)entry_SYSENTER_32, 0);
 
 out:
 	put_cpu();
@@ -1138,10 +1138,6 @@ static __init int setup_disablecpuid(char *arg)
 }
 __setup("clearcpuid=", setup_disablecpuid);
 
-DEFINE_PER_CPU(unsigned long, kernel_stack) =
-	(unsigned long)&init_thread_union + THREAD_SIZE;
-EXPORT_PER_CPU_SYMBOL(kernel_stack);
-
 #ifdef CONFIG_X86_64
 struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
 struct desc_ptr debug_idt_descr = { NR_VECTORS * 16 - 1,
@@ -1189,10 +1185,10 @@ void syscall_init(void)
 	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
 	 */
 	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
-	wrmsrl(MSR_LSTAR, system_call);
+	wrmsrl(MSR_LSTAR, entry_SYSCALL_64);
 
 #ifdef CONFIG_IA32_EMULATION
-	wrmsrl(MSR_CSTAR, ia32_cstar_target);
+	wrmsrl(MSR_CSTAR, entry_SYSCALL_compat);
 	/*
 	 * This only works on Intel CPUs.
 	 * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
@@ -1201,7 +1197,7 @@ void syscall_init(void)
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
 	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
-	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target);
+	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
 	wrmsrl(MSR_CSTAR, ignore_sysret);
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index edcb0e28c336..be4febc58b94 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -654,7 +654,7 @@ unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c)
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
 	unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
 	unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb;
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 	unsigned int cpu = c->cpu_index;
 #endif
 
@@ -773,19 +773,19 @@ unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c)
 
 	if (new_l2) {
 		l2 = new_l2;
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 		per_cpu(cpu_llc_id, cpu) = l2_id;
 #endif
 	}
 
 	if (new_l3) {
 		l3 = new_l3;
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 		per_cpu(cpu_llc_id, cpu) = l3_id;
 #endif
 	}
 
-#ifdef CONFIG_X86_HT
+#ifdef CONFIG_SMP
 	/*
 	 * If cpu_llc_id is not yet set, this means cpuid_level < 4 which in
 	 * turns means that the only possibility is SMT (as indicated in
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 95cf78d44ab4..df919ff103c3 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1053,6 +1053,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	char *msg = "Unknown";
 	u64 recover_paddr = ~0ull;
 	int flags = MF_ACTION_REQUIRED;
+	int lmce = 0;
 
 	prev_state = ist_enter(regs);
 
@@ -1080,11 +1081,20 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 		kill_it = 1;
 
 	/*
-	 * Go through all the banks in exclusion of the other CPUs.
-	 * This way we don't report duplicated events on shared banks
-	 * because the first one to see it will clear it.
+	 * Check if this MCE is signaled to only this logical processor
 	 */
-	order = mce_start(&no_way_out);
+	if (m.mcgstatus & MCG_STATUS_LMCES)
+		lmce = 1;
+	else {
+		/*
+		 * Go through all the banks in exclusion of the other CPUs.
+		 * This way we don't report duplicated events on shared banks
+		 * because the first one to see it will clear it.
+		 * If this is a Local MCE, then no need to perform rendezvous.
+		 */
+		order = mce_start(&no_way_out);
+	}
+
 	for (i = 0; i < cfg->banks; i++) {
 		__clear_bit(i, toclear);
 		if (!test_bit(i, valid_banks))
@@ -1161,8 +1171,18 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	 * Do most of the synchronization with other CPUs.
 	 * When there's any problem use only local no_way_out state.
 	 */
-	if (mce_end(order) < 0)
-		no_way_out = worst >= MCE_PANIC_SEVERITY;
+	if (!lmce) {
+		if (mce_end(order) < 0)
+			no_way_out = worst >= MCE_PANIC_SEVERITY;
+	} else {
+		/*
+		 * Local MCE skipped calling mce_reign()
+		 * If we found a fatal error, we need to panic here.
+		 */
+		 if (worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3)
+			mce_panic("Machine check from unknown source",
+				NULL, NULL);
+	}
 
 	/*
 	 * At insane "tolerant" levels we take no action. Otherwise
@@ -1643,10 +1663,16 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 		mce_intel_feature_init(c);
 		mce_adjust_timer = cmci_intel_adjust_timer;
 		break;
-	case X86_VENDOR_AMD:
+
+	case X86_VENDOR_AMD: {
+		u32 ebx = cpuid_ebx(0x80000007);
+
 		mce_amd_feature_init(c);
-		mce_flags.overflow_recov = cpuid_ebx(0x80000007) & 0x1;
+		mce_flags.overflow_recov = !!(ebx & BIT(0));
+		mce_flags.succor	 = !!(ebx & BIT(1));
 		break;
+		}
+
 	default:
 		break;
 	}
@@ -1982,6 +2008,7 @@ void mce_disable_bank(int bank)
 /*
  * mce=off Disables machine check
  * mce=no_cmci Disables CMCI
+ * mce=no_lmce Disables LMCE
  * mce=dont_log_ce Clears corrected events silently, no log created for CEs.
  * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared.
  * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above)
@@ -2005,6 +2032,8 @@ static int __init mcheck_enable(char *str)
 		cfg->disabled = true;
 	else if (!strcmp(str, "no_cmci"))
 		cfg->cmci_disabled = true;
+	else if (!strcmp(str, "no_lmce"))
+		cfg->lmce_disabled = true;
 	else if (!strcmp(str, "dont_log_ce"))
 		cfg->dont_log_ce = true;
 	else if (!strcmp(str, "ignore_ce"))
@@ -2014,11 +2043,8 @@ static int __init mcheck_enable(char *str)
 	else if (!strcmp(str, "bios_cmci_threshold"))
 		cfg->bios_cmci_threshold = true;
 	else if (isdigit(str[0])) {
-		get_option(&str, &(cfg->tolerant));
-		if (*str == ',') {
-			++str;
+		if (get_option(&str, &cfg->tolerant) == 2)
 			get_option(&str, &(cfg->monarch_timeout));
-		}
 	} else {
 		pr_info("mce argument %s ignored. Please use /sys\n", str);
 		return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 55ad9b37cae8..e99b15077e94 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -1,19 +1,13 @@
 /*
- *  (c) 2005-2012 Advanced Micro Devices, Inc.
+ *  (c) 2005-2015 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
  *
  *  Written by Jacob Shin - AMD, Inc.
- *
  *  Maintained by: Borislav Petkov <bp@alien8.de>
  *
- *  April 2006
- *     - added support for AMD Family 0x10 processors
- *  May 2012
- *     - major scrubbing
- *
- *  All MC4_MISCi registers are shared between multi-cores
+ *  All MC4_MISCi registers are shared between cores on a node.
  */
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
@@ -32,6 +26,7 @@
 #include <asm/idle.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
+#include <asm/trace/irq_vectors.h>
 
 #define NR_BLOCKS         9
 #define THRESHOLD_MAX     0xFFF
@@ -47,6 +42,13 @@
 #define MASK_BLKPTR_LO    0xFF000000
 #define MCG_XBLK_ADDR     0xC0000400
 
+/* Deferred error settings */
+#define MSR_CU_DEF_ERR		0xC0000410
+#define MASK_DEF_LVTOFF		0x000000F0
+#define MASK_DEF_INT_TYPE	0x00000006
+#define DEF_LVT_OFF		0x2
+#define DEF_INT_TYPE_APIC	0x2
+
 static const char * const th_names[] = {
 	"load_store",
 	"insn_fetch",
@@ -60,6 +62,13 @@ static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
 static DEFINE_PER_CPU(unsigned char, bank_map);	/* see which banks are on */
 
 static void amd_threshold_interrupt(void);
+static void amd_deferred_error_interrupt(void);
+
+static void default_deferred_error_interrupt(void)
+{
+	pr_err("Unexpected deferred interrupt at vector %x\n", DEFERRED_ERROR_VECTOR);
+}
+void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
 
 /*
  * CPU Initialization
@@ -196,7 +205,7 @@ static void mce_threshold_block_init(struct threshold_block *b, int offset)
 	threshold_restart_bank(&tr);
 };
 
-static int setup_APIC_mce(int reserved, int new)
+static int setup_APIC_mce_threshold(int reserved, int new)
 {
 	if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR,
 					      APIC_EILVT_MSG_FIX, 0))
@@ -205,6 +214,39 @@ static int setup_APIC_mce(int reserved, int new)
 	return reserved;
 }
 
+static int setup_APIC_deferred_error(int reserved, int new)
+{
+	if (reserved < 0 && !setup_APIC_eilvt(new, DEFERRED_ERROR_VECTOR,
+					      APIC_EILVT_MSG_FIX, 0))
+		return new;
+
+	return reserved;
+}
+
+static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
+{
+	u32 low = 0, high = 0;
+	int def_offset = -1, def_new;
+
+	if (rdmsr_safe(MSR_CU_DEF_ERR, &low, &high))
+		return;
+
+	def_new = (low & MASK_DEF_LVTOFF) >> 4;
+	if (!(low & MASK_DEF_LVTOFF)) {
+		pr_err(FW_BUG "Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.\n");
+		def_new = DEF_LVT_OFF;
+		low = (low & ~MASK_DEF_LVTOFF) | (DEF_LVT_OFF << 4);
+	}
+
+	def_offset = setup_APIC_deferred_error(def_offset, def_new);
+	if ((def_offset == def_new) &&
+	    (deferred_error_int_vector != amd_deferred_error_interrupt))
+		deferred_error_int_vector = amd_deferred_error_interrupt;
+
+	low = (low & ~MASK_DEF_INT_TYPE) | DEF_INT_TYPE_APIC;
+	wrmsr(MSR_CU_DEF_ERR, low, high);
+}
+
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
@@ -252,7 +294,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 
 			b.interrupt_enable = 1;
 			new	= (high & MASK_LVTOFF_HI) >> 20;
-			offset  = setup_APIC_mce(offset, new);
+			offset  = setup_APIC_mce_threshold(offset, new);
 
 			if ((offset == new) &&
 			    (mce_threshold_vector != amd_threshold_interrupt))
@@ -262,6 +304,73 @@ init:
 			mce_threshold_block_init(&b, offset);
 		}
 	}
+
+	if (mce_flags.succor)
+		deferred_error_interrupt_enable(c);
+}
+
+static void __log_error(unsigned int bank, bool threshold_err, u64 misc)
+{
+	struct mce m;
+	u64 status;
+
+	rdmsrl(MSR_IA32_MCx_STATUS(bank), status);
+	if (!(status & MCI_STATUS_VAL))
+		return;
+
+	mce_setup(&m);
+
+	m.status = status;
+	m.bank = bank;
+
+	if (threshold_err)
+		m.misc = misc;
+
+	if (m.status & MCI_STATUS_ADDRV)
+		rdmsrl(MSR_IA32_MCx_ADDR(bank), m.addr);
+
+	mce_log(&m);
+	wrmsrl(MSR_IA32_MCx_STATUS(bank), 0);
+}
+
+static inline void __smp_deferred_error_interrupt(void)
+{
+	inc_irq_stat(irq_deferred_error_count);
+	deferred_error_int_vector();
+}
+
+asmlinkage __visible void smp_deferred_error_interrupt(void)
+{
+	entering_irq();
+	__smp_deferred_error_interrupt();
+	exiting_ack_irq();
+}
+
+asmlinkage __visible void smp_trace_deferred_error_interrupt(void)
+{
+	entering_irq();
+	trace_deferred_error_apic_entry(DEFERRED_ERROR_VECTOR);
+	__smp_deferred_error_interrupt();
+	trace_deferred_error_apic_exit(DEFERRED_ERROR_VECTOR);
+	exiting_ack_irq();
+}
+
+/* APIC interrupt handler for deferred errors */
+static void amd_deferred_error_interrupt(void)
+{
+	u64 status;
+	unsigned int bank;
+
+	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+		rdmsrl(MSR_IA32_MCx_STATUS(bank), status);
+
+		if (!(status & MCI_STATUS_VAL) ||
+		    !(status & MCI_STATUS_DEFERRED))
+			continue;
+
+		__log_error(bank, false, 0);
+		break;
+	}
 }
 
 /*
@@ -273,12 +382,12 @@ init:
  * the interrupt goes off when error_count reaches threshold_limit.
  * the handler will simply log mcelog w/ software defined bank number.
  */
+
 static void amd_threshold_interrupt(void)
 {
 	u32 low = 0, high = 0, address = 0;
 	int cpu = smp_processor_id();
 	unsigned int bank, block;
-	struct mce m;
 
 	/* assume first bank caused it */
 	for (bank = 0; bank < mca_cfg.banks; ++bank) {
@@ -321,15 +430,7 @@ static void amd_threshold_interrupt(void)
 	return;
 
 log:
-	mce_setup(&m);
-	rdmsrl(MSR_IA32_MCx_STATUS(bank), m.status);
-	if (!(m.status & MCI_STATUS_VAL))
-		return;
-	m.misc = ((u64)high << 32) | low;
-	m.bank = bank;
-	mce_log(&m);
-
-	wrmsrl(MSR_IA32_MCx_STATUS(bank), 0);
+	__log_error(bank, true, ((u64)high << 32) | low);
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index b4a41cf030ed..844f56c5616d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -91,6 +91,36 @@ static int cmci_supported(int *banks)
 	return !!(cap & MCG_CMCI_P);
 }
 
+static bool lmce_supported(void)
+{
+	u64 tmp;
+
+	if (mca_cfg.lmce_disabled)
+		return false;
+
+	rdmsrl(MSR_IA32_MCG_CAP, tmp);
+
+	/*
+	 * LMCE depends on recovery support in the processor. Hence both
+	 * MCG_SER_P and MCG_LMCE_P should be present in MCG_CAP.
+	 */
+	if ((tmp & (MCG_SER_P | MCG_LMCE_P)) !=
+		   (MCG_SER_P | MCG_LMCE_P))
+		return false;
+
+	/*
+	 * BIOS should indicate support for LMCE by setting bit 20 in
+	 * IA32_FEATURE_CONTROL without which touching MCG_EXT_CTL will
+	 * generate a #GP fault.
+	 */
+	rdmsrl(MSR_IA32_FEATURE_CONTROL, tmp);
+	if ((tmp & (FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_LMCE)) ==
+		   (FEATURE_CONTROL_LOCKED | FEATURE_CONTROL_LMCE))
+		return true;
+
+	return false;
+}
+
 bool mce_intel_cmci_poll(void)
 {
 	if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE)
@@ -405,8 +435,22 @@ static void intel_init_cmci(void)
 	cmci_recheck();
 }
 
+void intel_init_lmce(void)
+{
+	u64 val;
+
+	if (!lmce_supported())
+		return;
+
+	rdmsrl(MSR_IA32_MCG_EXT_CTL, val);
+
+	if (!(val & MCG_EXT_CTL_LMCE_EN))
+		wrmsrl(MSR_IA32_MCG_EXT_CTL, val | MCG_EXT_CTL_LMCE_EN);
+}
+
 void mce_intel_feature_init(struct cpuinfo_x86 *c)
 {
 	intel_init_thermal(c);
 	intel_init_cmci();
+	intel_init_lmce();
 }
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 939155ffdece..aad4bd84b475 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -39,14 +39,12 @@ void hyperv_vector_handler(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	irq_enter();
-	exit_idle();
-
+	entering_irq();
 	inc_irq_stat(irq_hv_callback_count);
 	if (vmbus_handler)
 		vmbus_handler();
 
-	irq_exit();
+	exiting_irq();
 	set_irq_regs(old_regs);
 }
 
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 5f90b85ff22e..70d7c93f4550 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -98,7 +98,8 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,
 			continue;
 		base = range_state[i].base_pfn;
 		if (base < (1<<(20-PAGE_SHIFT)) && mtrr_state.have_fixed &&
-		    (mtrr_state.enabled & 1)) {
+		    (mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) &&
+		    (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) {
 			/* Var MTRR contains UC entry below 1M? Skip it: */
 			printk(BIOS_BUG_MSG, i);
 			if (base + size <= (1<<(20-PAGE_SHIFT)))
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 7d74f7b3c6ba..3b533cf37c74 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -102,59 +102,76 @@ static int check_type_overlap(u8 *prev, u8 *curr)
 	return 0;
 }
 
-/*
- * Error/Semi-error returns:
- * 0xFF - when MTRR is not enabled
- * *repeat == 1 implies [start:end] spanned across MTRR range and type returned
- *		corresponds only to [start:*partial_end].
- *		Caller has to lookup again for [*partial_end:end].
+/**
+ * mtrr_type_lookup_fixed - look up memory type in MTRR fixed entries
+ *
+ * Return the MTRR fixed memory type of 'start'.
+ *
+ * MTRR fixed entries are divided into the following ways:
+ *  0x00000 - 0x7FFFF : This range is divided into eight 64KB sub-ranges
+ *  0x80000 - 0xBFFFF : This range is divided into sixteen 16KB sub-ranges
+ *  0xC0000 - 0xFFFFF : This range is divided into sixty-four 4KB sub-ranges
+ *
+ * Return Values:
+ * MTRR_TYPE_(type)  - Matched memory type
+ * MTRR_TYPE_INVALID - Unmatched
+ */
+static u8 mtrr_type_lookup_fixed(u64 start, u64 end)
+{
+	int idx;
+
+	if (start >= 0x100000)
+		return MTRR_TYPE_INVALID;
+
+	/* 0x0 - 0x7FFFF */
+	if (start < 0x80000) {
+		idx = 0;
+		idx += (start >> 16);
+		return mtrr_state.fixed_ranges[idx];
+	/* 0x80000 - 0xBFFFF */
+	} else if (start < 0xC0000) {
+		idx = 1 * 8;
+		idx += ((start - 0x80000) >> 14);
+		return mtrr_state.fixed_ranges[idx];
+	}
+
+	/* 0xC0000 - 0xFFFFF */
+	idx = 3 * 8;
+	idx += ((start - 0xC0000) >> 12);
+	return mtrr_state.fixed_ranges[idx];
+}
+
+/**
+ * mtrr_type_lookup_variable - look up memory type in MTRR variable entries
+ *
+ * Return Value:
+ * MTRR_TYPE_(type) - Matched memory type or default memory type (unmatched)
+ *
+ * Output Arguments:
+ * repeat - Set to 1 when [start:end] spanned across MTRR range and type
+ *	    returned corresponds only to [start:*partial_end].  Caller has
+ *	    to lookup again for [*partial_end:end].
+ *
+ * uniform - Set to 1 when an MTRR covers the region uniformly, i.e. the
+ *	     region is fully covered by a single MTRR entry or the default
+ *	     type.
  */
-static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
+static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
+				    int *repeat, u8 *uniform)
 {
 	int i;
 	u64 base, mask;
 	u8 prev_match, curr_match;
 
 	*repeat = 0;
-	if (!mtrr_state_set)
-		return 0xFF;
-
-	if (!mtrr_state.enabled)
-		return 0xFF;
+	*uniform = 1;
 
-	/* Make end inclusive end, instead of exclusive */
+	/* Make end inclusive instead of exclusive */
 	end--;
 
-	/* Look in fixed ranges. Just return the type as per start */
-	if (mtrr_state.have_fixed && (start < 0x100000)) {
-		int idx;
-
-		if (start < 0x80000) {
-			idx = 0;
-			idx += (start >> 16);
-			return mtrr_state.fixed_ranges[idx];
-		} else if (start < 0xC0000) {
-			idx = 1 * 8;
-			idx += ((start - 0x80000) >> 14);
-			return mtrr_state.fixed_ranges[idx];
-		} else if (start < 0x1000000) {
-			idx = 3 * 8;
-			idx += ((start - 0xC0000) >> 12);
-			return mtrr_state.fixed_ranges[idx];
-		}
-	}
-
-	/*
-	 * Look in variable ranges
-	 * Look of multiple ranges matching this address and pick type
-	 * as per MTRR precedence
-	 */
-	if (!(mtrr_state.enabled & 2))
-		return mtrr_state.def_type;
-
-	prev_match = 0xFF;
+	prev_match = MTRR_TYPE_INVALID;
 	for (i = 0; i < num_var_ranges; ++i) {
-		unsigned short start_state, end_state;
+		unsigned short start_state, end_state, inclusive;
 
 		if (!(mtrr_state.var_ranges[i].mask_lo & (1 << 11)))
 			continue;
@@ -166,20 +183,29 @@ static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
 
 		start_state = ((start & mask) == (base & mask));
 		end_state = ((end & mask) == (base & mask));
+		inclusive = ((start < base) && (end > base));
 
-		if (start_state != end_state) {
+		if ((start_state != end_state) || inclusive) {
 			/*
 			 * We have start:end spanning across an MTRR.
-			 * We split the region into
-			 * either
-			 * (start:mtrr_end) (mtrr_end:end)
-			 * or
-			 * (start:mtrr_start) (mtrr_start:end)
+			 * We split the region into either
+			 *
+			 * - start_state:1
+			 * (start:mtrr_end)(mtrr_end:end)
+			 * - end_state:1
+			 * (start:mtrr_start)(mtrr_start:end)
+			 * - inclusive:1
+			 * (start:mtrr_start)(mtrr_start:mtrr_end)(mtrr_end:end)
+			 *
 			 * depending on kind of overlap.
-			 * Return the type for first region and a pointer to
-			 * the start of second region so that caller will
-			 * lookup again on the second region.
-			 * Note: This way we handle multiple overlaps as well.
+			 *
+			 * Return the type of the first region and a pointer
+			 * to the start of next region so that caller will be
+			 * advised to lookup again after having adjusted start
+			 * and end.
+			 *
+			 * Note: This way we handle overlaps with multiple
+			 * entries and the default type properly.
 			 */
 			if (start_state)
 				*partial_end = base + get_mtrr_size(mask);
@@ -193,59 +219,94 @@ static u8 __mtrr_type_lookup(u64 start, u64 end, u64 *partial_end, int *repeat)
 
 			end = *partial_end - 1; /* end is inclusive */
 			*repeat = 1;
+			*uniform = 0;
 		}
 
 		if ((start & mask) != (base & mask))
 			continue;
 
 		curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
-		if (prev_match == 0xFF) {
+		if (prev_match == MTRR_TYPE_INVALID) {
 			prev_match = curr_match;
 			continue;
 		}
 
+		*uniform = 0;
 		if (check_type_overlap(&prev_match, &curr_match))
 			return curr_match;
 	}
 
-	if (mtrr_tom2) {
-		if (start >= (1ULL<<32) && (end < mtrr_tom2))
-			return MTRR_TYPE_WRBACK;
-	}
-
-	if (prev_match != 0xFF)
+	if (prev_match != MTRR_TYPE_INVALID)
 		return prev_match;
 
 	return mtrr_state.def_type;
 }
 
-/*
- * Returns the effective MTRR type for the region
- * Error return:
- * 0xFF - when MTRR is not enabled
+/**
+ * mtrr_type_lookup - look up memory type in MTRR
+ *
+ * Return Values:
+ * MTRR_TYPE_(type)  - The effective MTRR type for the region
+ * MTRR_TYPE_INVALID - MTRR is disabled
+ *
+ * Output Argument:
+ * uniform - Set to 1 when an MTRR covers the region uniformly, i.e. the
+ *	     region is fully covered by a single MTRR entry or the default
+ *	     type.
  */
-u8 mtrr_type_lookup(u64 start, u64 end)
+u8 mtrr_type_lookup(u64 start, u64 end, u8 *uniform)
 {
-	u8 type, prev_type;
+	u8 type, prev_type, is_uniform = 1, dummy;
 	int repeat;
 	u64 partial_end;
 
-	type = __mtrr_type_lookup(start, end, &partial_end, &repeat);
+	if (!mtrr_state_set)
+		return MTRR_TYPE_INVALID;
+
+	if (!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED))
+		return MTRR_TYPE_INVALID;
+
+	/*
+	 * Look up the fixed ranges first, which take priority over
+	 * the variable ranges.
+	 */
+	if ((start < 0x100000) &&
+	    (mtrr_state.have_fixed) &&
+	    (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) {
+		is_uniform = 0;
+		type = mtrr_type_lookup_fixed(start, end);
+		goto out;
+	}
+
+	/*
+	 * Look up the variable ranges.  Look of multiple ranges matching
+	 * this address and pick type as per MTRR precedence.
+	 */
+	type = mtrr_type_lookup_variable(start, end, &partial_end,
+					 &repeat, &is_uniform);
 
 	/*
 	 * Common path is with repeat = 0.
 	 * However, we can have cases where [start:end] spans across some
-	 * MTRR range. Do repeated lookups for that case here.
+	 * MTRR ranges and/or the default type.  Do repeated lookups for
+	 * that case here.
 	 */
 	while (repeat) {
 		prev_type = type;
 		start = partial_end;
-		type = __mtrr_type_lookup(start, end, &partial_end, &repeat);
+		is_uniform = 0;
+		type = mtrr_type_lookup_variable(start, end, &partial_end,
+						 &repeat, &dummy);
 
 		if (check_type_overlap(&prev_type, &type))
-			return type;
+			goto out;
 	}
 
+	if (mtrr_tom2 && (start >= (1ULL<<32)) && (end < mtrr_tom2))
+		type = MTRR_TYPE_WRBACK;
+
+out:
+	*uniform = is_uniform;
 	return type;
 }
 
@@ -347,7 +408,9 @@ static void __init print_mtrr_state(void)
 		 mtrr_attrib_to_str(mtrr_state.def_type));
 	if (mtrr_state.have_fixed) {
 		pr_debug("MTRR fixed ranges %sabled:\n",
-			 mtrr_state.enabled & 1 ? "en" : "dis");
+			((mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) &&
+			 (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) ?
+			 "en" : "dis");
 		print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0);
 		for (i = 0; i < 2; ++i)
 			print_fixed(0x80000 + i * 0x20000, 0x04000,
@@ -360,7 +423,7 @@ static void __init print_mtrr_state(void)
 		print_fixed_last();
 	}
 	pr_debug("MTRR variable ranges %sabled:\n",
-		 mtrr_state.enabled & 2 ? "en" : "dis");
+		 mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED ? "en" : "dis");
 	high_width = (__ffs64(size_or_mask) - (32 - PAGE_SHIFT) + 3) / 4;
 
 	for (i = 0; i < num_var_ranges; ++i) {
@@ -382,7 +445,7 @@ static void __init print_mtrr_state(void)
 }
 
 /* Grab all of the MTRR state for this CPU into *state */
-void __init get_mtrr_state(void)
+bool __init get_mtrr_state(void)
 {
 	struct mtrr_var_range *vrs;
 	unsigned long flags;
@@ -426,6 +489,8 @@ void __init get_mtrr_state(void)
 
 	post_set();
 	local_irq_restore(flags);
+
+	return !!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED);
 }
 
 /* Some BIOS's are messed up and don't set all MTRRs the same! */
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index ea5f363a1948..e7ed0d8ebacb 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -59,6 +59,12 @@
 #define MTRR_TO_PHYS_WC_OFFSET 1000
 
 u32 num_var_ranges;
+static bool __mtrr_enabled;
+
+static bool mtrr_enabled(void)
+{
+	return __mtrr_enabled;
+}
 
 unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
@@ -286,7 +292,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 	int i, replace, error;
 	mtrr_type ltype;
 
-	if (!mtrr_if)
+	if (!mtrr_enabled())
 		return -ENXIO;
 
 	error = mtrr_if->validate_add_page(base, size, type);
@@ -435,6 +441,8 @@ static int mtrr_check(unsigned long base, unsigned long size)
 int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
 	     bool increment)
 {
+	if (!mtrr_enabled())
+		return -ENODEV;
 	if (mtrr_check(base, size))
 		return -EINVAL;
 	return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
@@ -463,8 +471,8 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 	unsigned long lbase, lsize;
 	int error = -EINVAL;
 
-	if (!mtrr_if)
-		return -ENXIO;
+	if (!mtrr_enabled())
+		return -ENODEV;
 
 	max = num_var_ranges;
 	/* No CPU hotplug when we change MTRR entries */
@@ -523,6 +531,8 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
  */
 int mtrr_del(int reg, unsigned long base, unsigned long size)
 {
+	if (!mtrr_enabled())
+		return -ENODEV;
 	if (mtrr_check(base, size))
 		return -EINVAL;
 	return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
@@ -538,6 +548,9 @@ EXPORT_SYMBOL(mtrr_del);
  * attempts to add a WC MTRR covering size bytes starting at base and
  * logs an error if this fails.
  *
+ * The called should provide a power of two size on an equivalent
+ * power of two boundary.
+ *
  * Drivers must store the return value to pass to mtrr_del_wc_if_needed,
  * but drivers should not try to interpret that return value.
  */
@@ -545,7 +558,7 @@ int arch_phys_wc_add(unsigned long base, unsigned long size)
 {
 	int ret;
 
-	if (pat_enabled)
+	if (pat_enabled() || !mtrr_enabled())
 		return 0;  /* Success!  (We don't need to do anything.) */
 
 	ret = mtrr_add(base, size, MTRR_TYPE_WRCOMB, true);
@@ -577,7 +590,7 @@ void arch_phys_wc_del(int handle)
 EXPORT_SYMBOL(arch_phys_wc_del);
 
 /*
- * phys_wc_to_mtrr_index - translates arch_phys_wc_add's return value
+ * arch_phys_wc_index - translates arch_phys_wc_add's return value
  * @handle: Return value from arch_phys_wc_add
  *
  * This will turn the return value from arch_phys_wc_add into an mtrr
@@ -587,14 +600,14 @@ EXPORT_SYMBOL(arch_phys_wc_del);
  * in printk line.  Alas there is an illegitimate use in some ancient
  * drm ioctls.
  */
-int phys_wc_to_mtrr_index(int handle)
+int arch_phys_wc_index(int handle)
 {
 	if (handle < MTRR_TO_PHYS_WC_OFFSET)
 		return -1;
 	else
 		return handle - MTRR_TO_PHYS_WC_OFFSET;
 }
-EXPORT_SYMBOL_GPL(phys_wc_to_mtrr_index);
+EXPORT_SYMBOL_GPL(arch_phys_wc_index);
 
 /*
  * HACK ALERT!
@@ -734,10 +747,12 @@ void __init mtrr_bp_init(void)
 	}
 
 	if (mtrr_if) {
+		__mtrr_enabled = true;
 		set_num_var_ranges();
 		init_table();
 		if (use_intel()) {
-			get_mtrr_state();
+			/* BIOS may override */
+			__mtrr_enabled = get_mtrr_state();
 
 			if (mtrr_cleanup(phys_addr)) {
 				changed_by_mtrr_cleanup = 1;
@@ -745,10 +760,16 @@ void __init mtrr_bp_init(void)
 			}
 		}
 	}
+
+	if (!mtrr_enabled())
+		pr_info("MTRR: Disabled\n");
 }
 
 void mtrr_ap_init(void)
 {
+	if (!mtrr_enabled())
+		return;
+
 	if (!use_intel() || mtrr_aps_delayed_init)
 		return;
 	/*
@@ -774,6 +795,9 @@ void mtrr_save_state(void)
 {
 	int first_cpu;
 
+	if (!mtrr_enabled())
+		return;
+
 	get_online_cpus();
 	first_cpu = cpumask_first(cpu_online_mask);
 	smp_call_function_single(first_cpu, mtrr_save_fixed_ranges, NULL, 1);
@@ -782,6 +806,8 @@ void mtrr_save_state(void)
 
 void set_mtrr_aps_delayed_init(void)
 {
+	if (!mtrr_enabled())
+		return;
 	if (!use_intel())
 		return;
 
@@ -793,7 +819,7 @@ void set_mtrr_aps_delayed_init(void)
  */
 void mtrr_aps_init(void)
 {
-	if (!use_intel())
+	if (!use_intel() || !mtrr_enabled())
 		return;
 
 	/*
@@ -810,7 +836,7 @@ void mtrr_aps_init(void)
 
 void mtrr_bp_restore(void)
 {
-	if (!use_intel())
+	if (!use_intel() || !mtrr_enabled())
 		return;
 
 	mtrr_if->set_all();
@@ -818,7 +844,7 @@ void mtrr_bp_restore(void)
 
 static int __init mtrr_init_finialize(void)
 {
-	if (!mtrr_if)
+	if (!mtrr_enabled())
 		return 0;
 
 	if (use_intel()) {
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index df5e41f31a27..951884dcc433 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -51,7 +51,7 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
 
 void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
-void get_mtrr_state(void);
+bool get_mtrr_state(void);
 
 extern void set_mtrr_ops(const struct mtrr_ops *ops);
 
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index c76d3e37c6e1..e068d6683dba 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -22,6 +22,7 @@
 #include <linux/elfcore.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/vmalloc.h>
 
 #include <asm/processor.h>
 #include <asm/hardirq.h>
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 6367a780cc8c..5ee771859b6f 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -4,7 +4,6 @@
 #include <linux/bootmem.h>
 #include <linux/export.h>
 #include <linux/io.h>
-#include <linux/irqdomain.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/of.h>
@@ -17,6 +16,7 @@
 #include <linux/of_pci.h>
 #include <linux/initrd.h>
 
+#include <asm/irqdomain.h>
 #include <asm/hpet.h>
 #include <asm/apic.h>
 #include <asm/pci_x86.h>
@@ -196,38 +196,31 @@ static struct of_ioapic_type of_ioapic_type[] =
 	},
 };
 
-static int ioapic_xlate(struct irq_domain *domain,
-			struct device_node *controller,
-			const u32 *intspec, u32 intsize,
-			irq_hw_number_t *out_hwirq, u32 *out_type)
+static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
+			      unsigned int nr_irqs, void *arg)
 {
+	struct of_phandle_args *irq_data = (void *)arg;
 	struct of_ioapic_type *it;
-	u32 line, idx, gsi;
+	struct irq_alloc_info tmp;
 
-	if (WARN_ON(intsize < 2))
+	if (WARN_ON(irq_data->args_count < 2))
 		return -EINVAL;
-
-	line = intspec[0];
-
-	if (intspec[1] >= ARRAY_SIZE(of_ioapic_type))
+	if (irq_data->args[1] >= ARRAY_SIZE(of_ioapic_type))
 		return -EINVAL;
 
-	it = &of_ioapic_type[intspec[1]];
+	it = &of_ioapic_type[irq_data->args[1]];
+	ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->trigger, it->polarity);
+	tmp.ioapic_id = mpc_ioapic_id(mp_irqdomain_ioapic_idx(domain));
+	tmp.ioapic_pin = irq_data->args[0];
 
-	idx = (u32)(long)domain->host_data;
-	gsi = mp_pin_to_gsi(idx, line);
-	if (mp_set_gsi_attr(gsi, it->trigger, it->polarity, cpu_to_node(0)))
-		return -EBUSY;
-
-	*out_hwirq = line;
-	*out_type = it->out_type;
-	return 0;
+	return mp_irqdomain_alloc(domain, virq, nr_irqs, &tmp);
 }
 
-const struct irq_domain_ops ioapic_irq_domain_ops = {
-	.map = mp_irqdomain_map,
-	.unmap = mp_irqdomain_unmap,
-	.xlate = ioapic_xlate,
+static const struct irq_domain_ops ioapic_irq_domain_ops = {
+	.alloc		= dt_irqdomain_alloc,
+	.free		= mp_irqdomain_free,
+	.activate	= mp_irqdomain_activate,
+	.deactivate	= mp_irqdomain_deactivate,
 };
 
 static void __init dtb_add_ioapic(struct device_node *dn)
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index fe9f0b79a18b..5cb9a4d6f623 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -627,8 +627,12 @@ static struct chipset early_qrk[] __initdata = {
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
 	  QFLAG_APPLY_ONCE, intel_graphics_stolen },
 	/*
-	 * HPET on current version of Baytrail platform has accuracy
-	 * problems, disable it for now:
+	 * HPET on the current version of the Baytrail platform has accuracy
+	 * problems: it will halt in deep idle state - so we disable it.
+	 *
+	 * More details can be found in section 18.10.1.3 of the datasheet:
+	 *
+	 *    http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf
 	 */
 	{ PCI_VENDOR_ID_INTEL, 0x0f00,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
deleted file mode 100644
index 1c309763e321..000000000000
--- a/arch/x86/kernel/entry_32.S
+++ /dev/null
@@ -1,1401 +0,0 @@
-/*
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- * I changed all the .align's to 4 (16 byte alignment), as that's faster
- * on a 486.
- *
- * Stack layout in 'syscall_exit':
- * 	ptrace needs to have all regs on the stack.
- *	if the order here is changed, it needs to be
- *	updated in fork.c:copy_process, signal.c:do_signal,
- *	ptrace.c and ptrace.h
- *
- *	 0(%esp) - %ebx
- *	 4(%esp) - %ecx
- *	 8(%esp) - %edx
- *       C(%esp) - %esi
- *	10(%esp) - %edi
- *	14(%esp) - %ebp
- *	18(%esp) - %eax
- *	1C(%esp) - %ds
- *	20(%esp) - %es
- *	24(%esp) - %fs
- *	28(%esp) - %gs		saved iff !CONFIG_X86_32_LAZY_GS
- *	2C(%esp) - orig_eax
- *	30(%esp) - %eip
- *	34(%esp) - %cs
- *	38(%esp) - %eflags
- *	3C(%esp) - %oldesp
- *	40(%esp) - %oldss
- *
- * "current" is in register %ebx during any slow entries.
- */
-
-#include <linux/linkage.h>
-#include <linux/err.h>
-#include <asm/thread_info.h>
-#include <asm/irqflags.h>
-#include <asm/errno.h>
-#include <asm/segment.h>
-#include <asm/smp.h>
-#include <asm/page_types.h>
-#include <asm/percpu.h>
-#include <asm/dwarf2.h>
-#include <asm/processor-flags.h>
-#include <asm/ftrace.h>
-#include <asm/irq_vectors.h>
-#include <asm/cpufeature.h>
-#include <asm/alternative-asm.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE	   0x40000000
-
-#ifndef CONFIG_AUDITSYSCALL
-#define sysenter_audit	syscall_trace_entry
-#define sysexit_audit	syscall_exit_work
-#endif
-
-	.section .entry.text, "ax"
-
-/*
- * We use macros for low-level operations which need to be overridden
- * for paravirtualization.  The following will never clobber any registers:
- *   INTERRUPT_RETURN (aka. "iret")
- *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
- *
- * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
- * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
- * Allowing a register to be clobbered can shrink the paravirt replacement
- * enough to patch inline, increasing performance.
- */
-
-#ifdef CONFIG_PREEMPT
-#define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
-#else
-#define preempt_stop(clobbers)
-#define resume_kernel		restore_all
-#endif
-
-.macro TRACE_IRQS_IRET
-#ifdef CONFIG_TRACE_IRQFLAGS
-	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)     # interrupts off?
-	jz 1f
-	TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * User gs save/restore
- *
- * %gs is used for userland TLS and kernel only uses it for stack
- * canary which is required to be at %gs:20 by gcc.  Read the comment
- * at the top of stackprotector.h for more info.
- *
- * Local labels 98 and 99 are used.
- */
-#ifdef CONFIG_X86_32_LAZY_GS
-
- /* unfortunately push/pop can't be no-op */
-.macro PUSH_GS
-	pushl_cfi $0
-.endm
-.macro POP_GS pop=0
-	addl $(4 + \pop), %esp
-	CFI_ADJUST_CFA_OFFSET -(4 + \pop)
-.endm
-.macro POP_GS_EX
-.endm
-
- /* all the rest are no-op */
-.macro PTGS_TO_GS
-.endm
-.macro PTGS_TO_GS_EX
-.endm
-.macro GS_TO_REG reg
-.endm
-.macro REG_TO_PTGS reg
-.endm
-.macro SET_KERNEL_GS reg
-.endm
-
-#else	/* CONFIG_X86_32_LAZY_GS */
-
-.macro PUSH_GS
-	pushl_cfi %gs
-	/*CFI_REL_OFFSET gs, 0*/
-.endm
-
-.macro POP_GS pop=0
-98:	popl_cfi %gs
-	/*CFI_RESTORE gs*/
-  .if \pop <> 0
-	add $\pop, %esp
-	CFI_ADJUST_CFA_OFFSET -\pop
-  .endif
-.endm
-.macro POP_GS_EX
-.pushsection .fixup, "ax"
-99:	movl $0, (%esp)
-	jmp 98b
-.popsection
-	_ASM_EXTABLE(98b,99b)
-.endm
-
-.macro PTGS_TO_GS
-98:	mov PT_GS(%esp), %gs
-.endm
-.macro PTGS_TO_GS_EX
-.pushsection .fixup, "ax"
-99:	movl $0, PT_GS(%esp)
-	jmp 98b
-.popsection
-	_ASM_EXTABLE(98b,99b)
-.endm
-
-.macro GS_TO_REG reg
-	movl %gs, \reg
-	/*CFI_REGISTER gs, \reg*/
-.endm
-.macro REG_TO_PTGS reg
-	movl \reg, PT_GS(%esp)
-	/*CFI_REL_OFFSET gs, PT_GS*/
-.endm
-.macro SET_KERNEL_GS reg
-	movl $(__KERNEL_STACK_CANARY), \reg
-	movl \reg, %gs
-.endm
-
-#endif	/* CONFIG_X86_32_LAZY_GS */
-
-.macro SAVE_ALL
-	cld
-	PUSH_GS
-	pushl_cfi %fs
-	/*CFI_REL_OFFSET fs, 0;*/
-	pushl_cfi %es
-	/*CFI_REL_OFFSET es, 0;*/
-	pushl_cfi %ds
-	/*CFI_REL_OFFSET ds, 0;*/
-	pushl_cfi %eax
-	CFI_REL_OFFSET eax, 0
-	pushl_cfi %ebp
-	CFI_REL_OFFSET ebp, 0
-	pushl_cfi %edi
-	CFI_REL_OFFSET edi, 0
-	pushl_cfi %esi
-	CFI_REL_OFFSET esi, 0
-	pushl_cfi %edx
-	CFI_REL_OFFSET edx, 0
-	pushl_cfi %ecx
-	CFI_REL_OFFSET ecx, 0
-	pushl_cfi %ebx
-	CFI_REL_OFFSET ebx, 0
-	movl $(__USER_DS), %edx
-	movl %edx, %ds
-	movl %edx, %es
-	movl $(__KERNEL_PERCPU), %edx
-	movl %edx, %fs
-	SET_KERNEL_GS %edx
-.endm
-
-.macro RESTORE_INT_REGS
-	popl_cfi %ebx
-	CFI_RESTORE ebx
-	popl_cfi %ecx
-	CFI_RESTORE ecx
-	popl_cfi %edx
-	CFI_RESTORE edx
-	popl_cfi %esi
-	CFI_RESTORE esi
-	popl_cfi %edi
-	CFI_RESTORE edi
-	popl_cfi %ebp
-	CFI_RESTORE ebp
-	popl_cfi %eax
-	CFI_RESTORE eax
-.endm
-
-.macro RESTORE_REGS pop=0
-	RESTORE_INT_REGS
-1:	popl_cfi %ds
-	/*CFI_RESTORE ds;*/
-2:	popl_cfi %es
-	/*CFI_RESTORE es;*/
-3:	popl_cfi %fs
-	/*CFI_RESTORE fs;*/
-	POP_GS \pop
-.pushsection .fixup, "ax"
-4:	movl $0, (%esp)
-	jmp 1b
-5:	movl $0, (%esp)
-	jmp 2b
-6:	movl $0, (%esp)
-	jmp 3b
-.popsection
-	_ASM_EXTABLE(1b,4b)
-	_ASM_EXTABLE(2b,5b)
-	_ASM_EXTABLE(3b,6b)
-	POP_GS_EX
-.endm
-
-.macro RING0_INT_FRAME
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, 3*4
-	/*CFI_OFFSET cs, -2*4;*/
-	CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_EC_FRAME
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, 4*4
-	/*CFI_OFFSET cs, -2*4;*/
-	CFI_OFFSET eip, -3*4
-.endm
-
-.macro RING0_PTREGS_FRAME
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, PT_OLDESP-PT_EBX
-	/*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/
-	CFI_OFFSET eip, PT_EIP-PT_OLDESP
-	/*CFI_OFFSET es, PT_ES-PT_OLDESP;*/
-	/*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/
-	CFI_OFFSET eax, PT_EAX-PT_OLDESP
-	CFI_OFFSET ebp, PT_EBP-PT_OLDESP
-	CFI_OFFSET edi, PT_EDI-PT_OLDESP
-	CFI_OFFSET esi, PT_ESI-PT_OLDESP
-	CFI_OFFSET edx, PT_EDX-PT_OLDESP
-	CFI_OFFSET ecx, PT_ECX-PT_OLDESP
-	CFI_OFFSET ebx, PT_EBX-PT_OLDESP
-.endm
-
-ENTRY(ret_from_fork)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	call schedule_tail
-	GET_THREAD_INFO(%ebp)
-	popl_cfi %eax
-	pushl_cfi $0x0202		# Reset kernel eflags
-	popfl_cfi
-	jmp syscall_exit
-	CFI_ENDPROC
-END(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	call schedule_tail
-	GET_THREAD_INFO(%ebp)
-	popl_cfi %eax
-	pushl_cfi $0x0202		# Reset kernel eflags
-	popfl_cfi
-	movl PT_EBP(%esp),%eax
-	call *PT_EBX(%esp)
-	movl $0,PT_EAX(%esp)
-	jmp syscall_exit
-	CFI_ENDPROC
-ENDPROC(ret_from_kernel_thread)
-
-/*
- * Return to user mode is not as complex as all this looks,
- * but we want the default path for a system call return to
- * go as quickly as possible which is why some of this is
- * less clear than it otherwise should be.
- */
-
-	# userspace resumption stub bypassing syscall exit tracing
-	ALIGN
-	RING0_PTREGS_FRAME
-ret_from_exception:
-	preempt_stop(CLBR_ANY)
-ret_from_intr:
-	GET_THREAD_INFO(%ebp)
-#ifdef CONFIG_VM86
-	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
-	movb PT_CS(%esp), %al
-	andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
-#else
-	/*
-	 * We can be coming here from child spawned by kernel_thread().
-	 */
-	movl PT_CS(%esp), %eax
-	andl $SEGMENT_RPL_MASK, %eax
-#endif
-	cmpl $USER_RPL, %eax
-	jb resume_kernel		# not returning to v8086 or userspace
-
-ENTRY(resume_userspace)
-	LOCKDEP_SYS_EXIT
- 	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done on
-					# int/exception return?
-	jne work_pending
-	jmp restore_all
-END(ret_from_exception)
-
-#ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
-	DISABLE_INTERRUPTS(CLBR_ANY)
-need_resched:
-	cmpl $0,PER_CPU_VAR(__preempt_count)
-	jnz restore_all
-	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
-	jz restore_all
-	call preempt_schedule_irq
-	jmp need_resched
-END(resume_kernel)
-#endif
-	CFI_ENDPROC
-
-/* SYSENTER_RETURN points to after the "sysenter" instruction in
-   the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
-
-	# sysenter call handler stub
-ENTRY(ia32_sysenter_target)
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA esp, 0
-	CFI_REGISTER esp, ebp
-	movl TSS_sysenter_sp0(%esp),%esp
-sysenter_past_esp:
-	/*
-	 * Interrupts are disabled here, but we can't trace it until
-	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
-	 * we immediately enable interrupts at that point anyway.
-	 */
-	pushl_cfi $__USER_DS
-	/*CFI_REL_OFFSET ss, 0*/
-	pushl_cfi %ebp
-	CFI_REL_OFFSET esp, 0
-	pushfl_cfi
-	orl $X86_EFLAGS_IF, (%esp)
-	pushl_cfi $__USER_CS
-	/*CFI_REL_OFFSET cs, 0*/
-	/*
-	 * Push current_thread_info()->sysenter_return to the stack.
-	 * A tiny bit of offset fixup is necessary: TI_sysenter_return
-	 * is relative to thread_info, which is at the bottom of the
-	 * kernel stack page.  4*4 means the 4 words pushed above;
-	 * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack;
-	 * and THREAD_SIZE takes us to the bottom.
-	 */
-	pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp)
-	CFI_REL_OFFSET eip, 0
-
-	pushl_cfi %eax
-	SAVE_ALL
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-/*
- * Load the potential sixth argument from user stack.
- * Careful about security.
- */
-	cmpl $__PAGE_OFFSET-3,%ebp
-	jae syscall_fault
-	ASM_STAC
-1:	movl (%ebp),%ebp
-	ASM_CLAC
-	movl %ebp,PT_EBP(%esp)
-	_ASM_EXTABLE(1b,syscall_fault)
-
-	GET_THREAD_INFO(%ebp)
-
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz sysenter_audit
-sysenter_do_call:
-	cmpl $(NR_syscalls), %eax
-	jae sysenter_badsys
-	call *sys_call_table(,%eax,4)
-sysenter_after_call:
-	movl %eax,PT_EAX(%esp)
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $_TIF_ALLWORK_MASK, %ecx
-	jnz sysexit_audit
-sysenter_exit:
-/* if something modifies registers it must also disable sysexit */
-	movl PT_EIP(%esp), %edx
-	movl PT_OLDESP(%esp), %ecx
-	xorl %ebp,%ebp
-	TRACE_IRQS_ON
-1:	mov  PT_FS(%esp), %fs
-	PTGS_TO_GS
-	ENABLE_INTERRUPTS_SYSEXIT
-
-#ifdef CONFIG_AUDITSYSCALL
-sysenter_audit:
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-	jnz syscall_trace_entry
-	/* movl PT_EAX(%esp), %eax	already set, syscall number: 1st arg to audit */
-	movl PT_EBX(%esp), %edx		/* ebx/a0: 2nd arg to audit */
-	/* movl PT_ECX(%esp), %ecx	already set, a1: 3nd arg to audit */
-	pushl_cfi PT_ESI(%esp)		/* a3: 5th arg */
-	pushl_cfi PT_EDX+4(%esp)	/* a2: 4th arg */
-	call __audit_syscall_entry
-	popl_cfi %ecx /* get that remapped edx off the stack */
-	popl_cfi %ecx /* get that remapped esi off the stack */
-	movl PT_EAX(%esp),%eax		/* reload syscall number */
-	jmp sysenter_do_call
-
-sysexit_audit:
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
-	jnz syscall_exit_work
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)
-	movl %eax,%edx		/* second arg, syscall return value */
-	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
-	setbe %al		/* 1 if so, 0 if not */
-	movzbl %al,%eax		/* zero-extend that */
-	call __audit_syscall_exit
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx
-	jnz syscall_exit_work
-	movl PT_EAX(%esp),%eax	/* reload syscall return value */
-	jmp sysenter_exit
-#endif
-
-	CFI_ENDPROC
-.pushsection .fixup,"ax"
-2:	movl $0,PT_FS(%esp)
-	jmp 1b
-.popsection
-	_ASM_EXTABLE(1b,2b)
-	PTGS_TO_GS_EX
-ENDPROC(ia32_sysenter_target)
-
-	# system call handler stub
-ENTRY(system_call)
-	RING0_INT_FRAME			# can't unwind into user space anyway
-	ASM_CLAC
-	pushl_cfi %eax			# save orig_eax
-	SAVE_ALL
-	GET_THREAD_INFO(%ebp)
-					# system call tracing in operation / emulation
-	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
-	jnz syscall_trace_entry
-	cmpl $(NR_syscalls), %eax
-	jae syscall_badsys
-syscall_call:
-	call *sys_call_table(,%eax,4)
-syscall_after_call:
-	movl %eax,PT_EAX(%esp)		# store the return value
-syscall_exit:
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	testl $_TIF_ALLWORK_MASK, %ecx	# current->work
-	jnz syscall_exit_work
-
-restore_all:
-	TRACE_IRQS_IRET
-restore_all_notrace:
-#ifdef CONFIG_X86_ESPFIX32
-	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS, SS and CS
-	# Warning: PT_OLDSS(%esp) contains the wrong/random values if we
-	# are returning to the kernel.
-	# See comments in process.c:copy_thread() for details.
-	movb PT_OLDSS(%esp), %ah
-	movb PT_CS(%esp), %al
-	andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
-	cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
-	CFI_REMEMBER_STATE
-	je ldt_ss			# returning to user-space with LDT SS
-#endif
-restore_nocheck:
-	RESTORE_REGS 4			# skip orig_eax/error_code
-irq_return:
-	INTERRUPT_RETURN
-.section .fixup,"ax"
-ENTRY(iret_exc)
-	pushl $0			# no error code
-	pushl $do_iret_error
-	jmp error_code
-.previous
-	_ASM_EXTABLE(irq_return,iret_exc)
-
-#ifdef CONFIG_X86_ESPFIX32
-	CFI_RESTORE_STATE
-ldt_ss:
-#ifdef CONFIG_PARAVIRT
-	/*
-	 * The kernel can't run on a non-flat stack if paravirt mode
-	 * is active.  Rather than try to fixup the high bits of
-	 * ESP, bypass this code entirely.  This may break DOSemu
-	 * and/or Wine support in a paravirt VM, although the option
-	 * is still available to implement the setting of the high
-	 * 16-bits in the INTERRUPT_RETURN paravirt-op.
-	 */
-	cmpl $0, pv_info+PARAVIRT_enabled
-	jne restore_nocheck
-#endif
-
-/*
- * Setup and switch to ESPFIX stack
- *
- * We're returning to userspace with a 16 bit stack. The CPU will not
- * restore the high word of ESP for us on executing iret... This is an
- * "official" bug of all the x86-compatible CPUs, which we can work
- * around to make dosemu and wine happy. We do this by preloading the
- * high word of ESP with the high word of the userspace ESP while
- * compensating for the offset by changing to the ESPFIX segment with
- * a base address that matches for the difference.
- */
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
-	mov %esp, %edx			/* load kernel esp */
-	mov PT_OLDESP(%esp), %eax	/* load userspace esp */
-	mov %dx, %ax			/* eax: new kernel esp */
-	sub %eax, %edx			/* offset (low word is 0) */
-	shr $16, %edx
-	mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
-	mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
-	pushl_cfi $__ESPFIX_SS
-	pushl_cfi %eax			/* new kernel esp */
-	/* Disable interrupts, but do not irqtrace this section: we
-	 * will soon execute iret and the tracer was already set to
-	 * the irqstate after the iret */
-	DISABLE_INTERRUPTS(CLBR_EAX)
-	lss (%esp), %esp		/* switch to espfix segment */
-	CFI_ADJUST_CFA_OFFSET -8
-	jmp restore_nocheck
-#endif
-	CFI_ENDPROC
-ENDPROC(system_call)
-
-	# perform work that needs to be done immediately before resumption
-	ALIGN
-	RING0_PTREGS_FRAME		# can't unwind into user space anyway
-work_pending:
-	testb $_TIF_NEED_RESCHED, %cl
-	jz work_notifysig
-work_resched:
-	call schedule
-	LOCKDEP_SYS_EXIT
-	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
-					# setting need_resched or sigpending
-					# between sampling and the iret
-	TRACE_IRQS_OFF
-	movl TI_flags(%ebp), %ecx
-	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
-					# than syscall tracing?
-	jz restore_all
-	testb $_TIF_NEED_RESCHED, %cl
-	jnz work_resched
-
-work_notifysig:				# deal with pending signals and
-					# notify-resume requests
-#ifdef CONFIG_VM86
-	testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
-	movl %esp, %eax
-	jnz work_notifysig_v86		# returning to kernel-space or
-					# vm86-space
-1:
-#else
-	movl %esp, %eax
-#endif
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	movb PT_CS(%esp), %bl
-	andb $SEGMENT_RPL_MASK, %bl
-	cmpb $USER_RPL, %bl
-	jb resume_kernel
-	xorl %edx, %edx
-	call do_notify_resume
-	jmp resume_userspace
-
-#ifdef CONFIG_VM86
-	ALIGN
-work_notifysig_v86:
-	pushl_cfi %ecx			# save ti_flags for do_notify_resume
-	call save_v86_state		# %eax contains pt_regs pointer
-	popl_cfi %ecx
-	movl %eax, %esp
-	jmp 1b
-#endif
-END(work_pending)
-
-	# perform syscall exit tracing
-	ALIGN
-syscall_trace_entry:
-	movl $-ENOSYS,PT_EAX(%esp)
-	movl %esp, %eax
-	call syscall_trace_enter
-	/* What it returned is what we'll actually use.  */
-	cmpl $(NR_syscalls), %eax
-	jnae syscall_call
-	jmp syscall_exit
-END(syscall_trace_entry)
-
-	# perform syscall exit tracing
-	ALIGN
-syscall_exit_work:
-	testl $_TIF_WORK_SYSCALL_EXIT, %ecx
-	jz work_pending
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call
-					# schedule() instead
-	movl %esp, %eax
-	call syscall_trace_leave
-	jmp resume_userspace
-END(syscall_exit_work)
-	CFI_ENDPROC
-
-	RING0_INT_FRAME			# can't unwind into user space anyway
-syscall_fault:
-	ASM_CLAC
-	GET_THREAD_INFO(%ebp)
-	movl $-EFAULT,PT_EAX(%esp)
-	jmp resume_userspace
-END(syscall_fault)
-
-syscall_badsys:
-	movl $-ENOSYS,%eax
-	jmp syscall_after_call
-END(syscall_badsys)
-
-sysenter_badsys:
-	movl $-ENOSYS,%eax
-	jmp sysenter_after_call
-END(sysenter_badsys)
-	CFI_ENDPROC
-
-.macro FIXUP_ESPFIX_STACK
-/*
- * Switch back for ESPFIX stack to the normal zerobased stack
- *
- * We can't call C functions using the ESPFIX stack. This code reads
- * the high word of the segment base from the GDT and swiches to the
- * normal stack and adjusts ESP with the matching offset.
- */
-#ifdef CONFIG_X86_ESPFIX32
-	/* fixup the stack */
-	mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
-	mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
-	shl $16, %eax
-	addl %esp, %eax			/* the adjusted stack pointer */
-	pushl_cfi $__KERNEL_DS
-	pushl_cfi %eax
-	lss (%esp), %esp		/* switch to the normal stack segment */
-	CFI_ADJUST_CFA_OFFSET -8
-#endif
-.endm
-.macro UNWIND_ESPFIX_STACK
-#ifdef CONFIG_X86_ESPFIX32
-	movl %ss, %eax
-	/* see if on espfix stack */
-	cmpw $__ESPFIX_SS, %ax
-	jne 27f
-	movl $__KERNEL_DS, %eax
-	movl %eax, %ds
-	movl %eax, %es
-	/* switch to normal stack */
-	FIXUP_ESPFIX_STACK
-27:
-#endif
-.endm
-
-/*
- * Build the entry stubs with some assembler magic.
- * We pack 1 stub into every 8-byte block.
- */
-	.align 8
-ENTRY(irq_entries_start)
-	RING0_INT_FRAME
-    vector=FIRST_EXTERNAL_VECTOR
-    .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
-	pushl_cfi $(~vector+0x80)	/* Note: always in signed byte range */
-    vector=vector+1
-	jmp	common_interrupt
-	CFI_ADJUST_CFA_OFFSET -4
-	.align	8
-    .endr
-END(irq_entries_start)
-
-/*
- * the CPU automatically disables interrupts when executing an IRQ vector,
- * so IRQ-flags tracing has to follow that:
- */
-	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
-	ASM_CLAC
-	addl $-0x80,(%esp)	/* Adjust vector into the [-256,-1] range */
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	movl %esp,%eax
-	call do_IRQ
-	jmp ret_from_intr
-ENDPROC(common_interrupt)
-	CFI_ENDPROC
-
-#define BUILD_INTERRUPT3(name, nr, fn)	\
-ENTRY(name)				\
-	RING0_INT_FRAME;		\
-	ASM_CLAC;			\
-	pushl_cfi $~(nr);		\
-	SAVE_ALL;			\
-	TRACE_IRQS_OFF			\
-	movl %esp,%eax;			\
-	call fn;			\
-	jmp ret_from_intr;		\
-	CFI_ENDPROC;			\
-ENDPROC(name)
-
-
-#ifdef CONFIG_TRACING
-#define TRACE_BUILD_INTERRUPT(name, nr)		\
-	BUILD_INTERRUPT3(trace_##name, nr, smp_trace_##name)
-#else
-#define TRACE_BUILD_INTERRUPT(name, nr)
-#endif
-
-#define BUILD_INTERRUPT(name, nr) \
-	BUILD_INTERRUPT3(name, nr, smp_##name); \
-	TRACE_BUILD_INTERRUPT(name, nr)
-
-/* The include is where all of the SMP etc. interrupts come from */
-#include <asm/entry_arch.h>
-
-ENTRY(coprocessor_error)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_coprocessor_error
-	jmp error_code
-	CFI_ENDPROC
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-#ifdef CONFIG_X86_INVD_BUG
-	/* AMD 486 bug: invd from userspace calls exception 19 instead of #GP */
-	ALTERNATIVE "pushl_cfi $do_general_protection",	\
-		    "pushl $do_simd_coprocessor_error", \
-		    X86_FEATURE_XMM
-#else
-	pushl_cfi $do_simd_coprocessor_error
-#endif
-	jmp error_code
-	CFI_ENDPROC
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $-1			# mark this as an int
-	pushl_cfi $do_device_not_available
-	jmp error_code
-	CFI_ENDPROC
-END(device_not_available)
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_iret)
-	iret
-	_ASM_EXTABLE(native_iret, iret_exc)
-END(native_iret)
-
-ENTRY(native_irq_enable_sysexit)
-	sti
-	sysexit
-END(native_irq_enable_sysexit)
-#endif
-
-ENTRY(overflow)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_overflow
-	jmp error_code
-	CFI_ENDPROC
-END(overflow)
-
-ENTRY(bounds)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_bounds
-	jmp error_code
-	CFI_ENDPROC
-END(bounds)
-
-ENTRY(invalid_op)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_invalid_op
-	jmp error_code
-	CFI_ENDPROC
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_coprocessor_segment_overrun
-	jmp error_code
-	CFI_ENDPROC
-END(coprocessor_segment_overrun)
-
-ENTRY(invalid_TSS)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_invalid_TSS
-	jmp error_code
-	CFI_ENDPROC
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_segment_not_present
-	jmp error_code
-	CFI_ENDPROC
-END(segment_not_present)
-
-ENTRY(stack_segment)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_stack_segment
-	jmp error_code
-	CFI_ENDPROC
-END(stack_segment)
-
-ENTRY(alignment_check)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_alignment_check
-	jmp error_code
-	CFI_ENDPROC
-END(alignment_check)
-
-ENTRY(divide_error)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0			# no error code
-	pushl_cfi $do_divide_error
-	jmp error_code
-	CFI_ENDPROC
-END(divide_error)
-
-#ifdef CONFIG_X86_MCE
-ENTRY(machine_check)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi machine_check_vector
-	jmp error_code
-	CFI_ENDPROC
-END(machine_check)
-#endif
-
-ENTRY(spurious_interrupt_bug)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $0
-	pushl_cfi $do_spurious_interrupt_bug
-	jmp error_code
-	CFI_ENDPROC
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_XEN
-/* Xen doesn't set %esp to be precisely what the normal sysenter
-   entrypoint expects, so fix it up before using the normal path. */
-ENTRY(xen_sysenter_target)
-	RING0_INT_FRAME
-	addl $5*4, %esp		/* remove xen-provided frame */
-	CFI_ADJUST_CFA_OFFSET -5*4
-	jmp sysenter_past_esp
-	CFI_ENDPROC
-
-ENTRY(xen_hypervisor_callback)
-	CFI_STARTPROC
-	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	TRACE_IRQS_OFF
-
-	/* Check to see if we got the event in the critical
-	   region in xen_iret_direct, after we've reenabled
-	   events and checked for pending events.  This simulates
-	   iret instruction's behaviour where it delivers a
-	   pending interrupt when enabling interrupts. */
-	movl PT_EIP(%esp),%eax
-	cmpl $xen_iret_start_crit,%eax
-	jb   1f
-	cmpl $xen_iret_end_crit,%eax
-	jae  1f
-
-	jmp  xen_iret_crit_fixup
-
-ENTRY(xen_do_upcall)
-1:	mov %esp, %eax
-	call xen_evtchn_do_upcall
-#ifndef CONFIG_PREEMPT
-	call xen_maybe_preempt_hcall
-#endif
-	jmp  ret_from_intr
-	CFI_ENDPROC
-ENDPROC(xen_hypervisor_callback)
-
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-#  1. Fault while reloading DS, ES, FS or GS
-#  2. Fault while executing IRET
-# Category 1 we fix up by reattempting the load, and zeroing the segment
-# register if the load fails.
-# Category 2 we fix up by jumping to do_iret_error. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by maintaining a status value in EAX.
-ENTRY(xen_failsafe_callback)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	movl $1,%eax
-1:	mov 4(%esp),%ds
-2:	mov 8(%esp),%es
-3:	mov 12(%esp),%fs
-4:	mov 16(%esp),%gs
-	/* EAX == 0 => Category 1 (Bad segment)
-	   EAX != 0 => Category 2 (Bad IRET) */
-	testl %eax,%eax
-	popl_cfi %eax
-	lea 16(%esp),%esp
-	CFI_ADJUST_CFA_OFFSET -16
-	jz 5f
-	jmp iret_exc
-5:	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
-	SAVE_ALL
-	jmp ret_from_exception
-	CFI_ENDPROC
-
-.section .fixup,"ax"
-6:	xorl %eax,%eax
-	movl %eax,4(%esp)
-	jmp 1b
-7:	xorl %eax,%eax
-	movl %eax,8(%esp)
-	jmp 2b
-8:	xorl %eax,%eax
-	movl %eax,12(%esp)
-	jmp 3b
-9:	xorl %eax,%eax
-	movl %eax,16(%esp)
-	jmp 4b
-.previous
-	_ASM_EXTABLE(1b,6b)
-	_ASM_EXTABLE(2b,7b)
-	_ASM_EXTABLE(3b,8b)
-	_ASM_EXTABLE(4b,9b)
-ENDPROC(xen_failsafe_callback)
-
-BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
-		xen_evtchn_do_upcall)
-
-#endif	/* CONFIG_XEN */
-
-#if IS_ENABLED(CONFIG_HYPERV)
-
-BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
-	hyperv_vector_handler)
-
-#endif /* CONFIG_HYPERV */
-
-#ifdef CONFIG_FUNCTION_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-ENTRY(mcount)
-	ret
-END(mcount)
-
-ENTRY(ftrace_caller)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	pushl $0	/* Pass NULL as regs pointer */
-	movl 4*4(%esp), %eax
-	movl 0x4(%ebp), %edx
-	movl function_trace_op, %ecx
-	subl $MCOUNT_INSN_SIZE, %eax
-
-.globl ftrace_call
-ftrace_call:
-	call ftrace_stub
-
-	addl $4,%esp	/* skip NULL pointer */
-	popl %edx
-	popl %ecx
-	popl %eax
-ftrace_ret:
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-.globl ftrace_graph_call
-ftrace_graph_call:
-	jmp ftrace_stub
-#endif
-
-.globl ftrace_stub
-ftrace_stub:
-	ret
-END(ftrace_caller)
-
-ENTRY(ftrace_regs_caller)
-	pushf	/* push flags before compare (in cs location) */
-
-	/*
-	 * i386 does not save SS and ESP when coming from kernel.
-	 * Instead, to get sp, &regs->sp is used (see ptrace.h).
-	 * Unfortunately, that means eflags must be at the same location
-	 * as the current return ip is. We move the return ip into the
-	 * ip location, and move flags into the return ip location.
-	 */
-	pushl 4(%esp)	/* save return ip into ip slot */
-
-	pushl $0	/* Load 0 into orig_ax */
-	pushl %gs
-	pushl %fs
-	pushl %es
-	pushl %ds
-	pushl %eax
-	pushl %ebp
-	pushl %edi
-	pushl %esi
-	pushl %edx
-	pushl %ecx
-	pushl %ebx
-
-	movl 13*4(%esp), %eax	/* Get the saved flags */
-	movl %eax, 14*4(%esp)	/* Move saved flags into regs->flags location */
-				/* clobbering return ip */
-	movl $__KERNEL_CS,13*4(%esp)
-
-	movl 12*4(%esp), %eax	/* Load ip (1st parameter) */
-	subl $MCOUNT_INSN_SIZE, %eax	/* Adjust ip */
-	movl 0x4(%ebp), %edx	/* Load parent ip (2nd parameter) */
-	movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
-	pushl %esp		/* Save pt_regs as 4th parameter */
-
-GLOBAL(ftrace_regs_call)
-	call ftrace_stub
-
-	addl $4, %esp		/* Skip pt_regs */
-	movl 14*4(%esp), %eax	/* Move flags back into cs */
-	movl %eax, 13*4(%esp)	/* Needed to keep addl from modifying flags */
-	movl 12*4(%esp), %eax	/* Get return ip from regs->ip */
-	movl %eax, 14*4(%esp)	/* Put return ip back for ret */
-
-	popl %ebx
-	popl %ecx
-	popl %edx
-	popl %esi
-	popl %edi
-	popl %ebp
-	popl %eax
-	popl %ds
-	popl %es
-	popl %fs
-	popl %gs
-	addl $8, %esp		/* Skip orig_ax and ip */
-	popf			/* Pop flags at end (no addl to corrupt flags) */
-	jmp ftrace_ret
-
-	popf
-	jmp  ftrace_stub
-#else /* ! CONFIG_DYNAMIC_FTRACE */
-
-ENTRY(mcount)
-	cmpl $__PAGE_OFFSET, %esp
-	jb ftrace_stub		/* Paging not enabled yet? */
-
-	cmpl $ftrace_stub, ftrace_trace_function
-	jnz trace
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	cmpl $ftrace_stub, ftrace_graph_return
-	jnz ftrace_graph_caller
-
-	cmpl $ftrace_graph_entry_stub, ftrace_graph_entry
-	jnz ftrace_graph_caller
-#endif
-.globl ftrace_stub
-ftrace_stub:
-	ret
-
-	/* taken from glibc */
-trace:
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	movl 0x4(%ebp), %edx
-	subl $MCOUNT_INSN_SIZE, %eax
-
-	call *ftrace_trace_function
-
-	popl %edx
-	popl %ecx
-	popl %eax
-	jmp ftrace_stub
-END(mcount)
-#endif /* CONFIG_DYNAMIC_FTRACE */
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
-	pushl %eax
-	pushl %ecx
-	pushl %edx
-	movl 0xc(%esp), %eax
-	lea 0x4(%ebp), %edx
-	movl (%ebp), %ecx
-	subl $MCOUNT_INSN_SIZE, %eax
-	call prepare_ftrace_return
-	popl %edx
-	popl %ecx
-	popl %eax
-	ret
-END(ftrace_graph_caller)
-
-.globl return_to_handler
-return_to_handler:
-	pushl %eax
-	pushl %edx
-	movl %ebp, %eax
-	call ftrace_return_to_handler
-	movl %eax, %ecx
-	popl %edx
-	popl %eax
-	jmp *%ecx
-#endif
-
-#ifdef CONFIG_TRACING
-ENTRY(trace_page_fault)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $trace_do_page_fault
-	jmp error_code
-	CFI_ENDPROC
-END(trace_page_fault)
-#endif
-
-ENTRY(page_fault)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_page_fault
-	ALIGN
-error_code:
-	/* the function address is in %gs's slot on the stack */
-	pushl_cfi %fs
-	/*CFI_REL_OFFSET fs, 0*/
-	pushl_cfi %es
-	/*CFI_REL_OFFSET es, 0*/
-	pushl_cfi %ds
-	/*CFI_REL_OFFSET ds, 0*/
-	pushl_cfi_reg eax
-	pushl_cfi_reg ebp
-	pushl_cfi_reg edi
-	pushl_cfi_reg esi
-	pushl_cfi_reg edx
-	pushl_cfi_reg ecx
-	pushl_cfi_reg ebx
-	cld
-	movl $(__KERNEL_PERCPU), %ecx
-	movl %ecx, %fs
-	UNWIND_ESPFIX_STACK
-	GS_TO_REG %ecx
-	movl PT_GS(%esp), %edi		# get the function address
-	movl PT_ORIG_EAX(%esp), %edx	# get the error code
-	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
-	REG_TO_PTGS %ecx
-	SET_KERNEL_GS %ecx
-	movl $(__USER_DS), %ecx
-	movl %ecx, %ds
-	movl %ecx, %es
-	TRACE_IRQS_OFF
-	movl %esp,%eax			# pt_regs pointer
-	call *%edi
-	jmp ret_from_exception
-	CFI_ENDPROC
-END(page_fault)
-
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-.macro FIX_STACK offset ok label
-	cmpw $__KERNEL_CS, 4(%esp)
-	jne \ok
-\label:
-	movl TSS_sysenter_sp0 + \offset(%esp), %esp
-	CFI_DEF_CFA esp, 0
-	CFI_UNDEFINED eip
-	pushfl_cfi
-	pushl_cfi $__KERNEL_CS
-	pushl_cfi $sysenter_past_esp
-	CFI_REL_OFFSET eip, 0
-.endm
-
-ENTRY(debug)
-	RING0_INT_FRAME
-	ASM_CLAC
-	cmpl $ia32_sysenter_target,(%esp)
-	jne debug_stack_correct
-	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
-debug_stack_correct:
-	pushl_cfi $-1			# mark this as an int
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx			# error code 0
-	movl %esp,%eax			# pt_regs pointer
-	call do_debug
-	jmp ret_from_exception
-	CFI_ENDPROC
-END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got  an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-ENTRY(nmi)
-	RING0_INT_FRAME
-	ASM_CLAC
-#ifdef CONFIG_X86_ESPFIX32
-	pushl_cfi %eax
-	movl %ss, %eax
-	cmpw $__ESPFIX_SS, %ax
-	popl_cfi %eax
-	je nmi_espfix_stack
-#endif
-	cmpl $ia32_sysenter_target,(%esp)
-	je nmi_stack_fixup
-	pushl_cfi %eax
-	movl %esp,%eax
-	/* Do not access memory above the end of our stack page,
-	 * it might not exist.
-	 */
-	andl $(THREAD_SIZE-1),%eax
-	cmpl $(THREAD_SIZE-20),%eax
-	popl_cfi %eax
-	jae nmi_stack_correct
-	cmpl $ia32_sysenter_target,12(%esp)
-	je nmi_debug_stack_check
-nmi_stack_correct:
-	/* We have a RING0_INT_FRAME here */
-	pushl_cfi %eax
-	SAVE_ALL
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_nmi
-	jmp restore_all_notrace
-	CFI_ENDPROC
-
-nmi_stack_fixup:
-	RING0_INT_FRAME
-	FIX_STACK 12, nmi_stack_correct, 1
-	jmp nmi_stack_correct
-
-nmi_debug_stack_check:
-	/* We have a RING0_INT_FRAME here */
-	cmpw $__KERNEL_CS,16(%esp)
-	jne nmi_stack_correct
-	cmpl $debug,(%esp)
-	jb nmi_stack_correct
-	cmpl $debug_esp_fix_insn,(%esp)
-	ja nmi_stack_correct
-	FIX_STACK 24, nmi_stack_correct, 1
-	jmp nmi_stack_correct
-
-#ifdef CONFIG_X86_ESPFIX32
-nmi_espfix_stack:
-	/* We have a RING0_INT_FRAME here.
-	 *
-	 * create the pointer to lss back
-	 */
-	pushl_cfi %ss
-	pushl_cfi %esp
-	addl $4, (%esp)
-	/* copy the iret frame of 12 bytes */
-	.rept 3
-	pushl_cfi 16(%esp)
-	.endr
-	pushl_cfi %eax
-	SAVE_ALL
-	FIXUP_ESPFIX_STACK		# %eax == %esp
-	xorl %edx,%edx			# zero error code
-	call do_nmi
-	RESTORE_REGS
-	lss 12+4(%esp), %esp		# back to espfix stack
-	CFI_ADJUST_CFA_OFFSET -24
-	jmp irq_return
-#endif
-	CFI_ENDPROC
-END(nmi)
-
-ENTRY(int3)
-	RING0_INT_FRAME
-	ASM_CLAC
-	pushl_cfi $-1			# mark this as an int
-	SAVE_ALL
-	TRACE_IRQS_OFF
-	xorl %edx,%edx		# zero error code
-	movl %esp,%eax		# pt_regs pointer
-	call do_int3
-	jmp ret_from_exception
-	CFI_ENDPROC
-END(int3)
-
-ENTRY(general_protection)
-	RING0_EC_FRAME
-	pushl_cfi $do_general_protection
-	jmp error_code
-	CFI_ENDPROC
-END(general_protection)
-
-#ifdef CONFIG_KVM_GUEST
-ENTRY(async_page_fault)
-	RING0_EC_FRAME
-	ASM_CLAC
-	pushl_cfi $do_async_page_fault
-	jmp error_code
-	CFI_ENDPROC
-END(async_page_fault)
-#endif
-
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
deleted file mode 100644
index 02c2eff7478d..000000000000
--- a/arch/x86/kernel/entry_64.S
+++ /dev/null
@@ -1,1653 +0,0 @@
-/*
- *  linux/arch/x86_64/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002  Andi Kleen SuSE Labs
- *  Copyright (C) 2000  Pavel Machek <pavel@suse.cz>
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- *
- * Some of this is documented in Documentation/x86/entry_64.txt
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after an interrupt and after each system call.
- *
- * A note on terminology:
- * - iret frame: Architecture defined interrupt frame from SS to RIP
- * at the top of the kernel process stack.
- *
- * Some macro usage:
- * - CFI macros are used to generate dwarf2 unwind information for better
- * backtraces. They don't change any code.
- * - ENTRY/END Define functions in the symbol table.
- * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
- * - idtentry - Define exception entry points.
- */
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/msr.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/hw_irq.h>
-#include <asm/page_types.h>
-#include <asm/irqflags.h>
-#include <asm/paravirt.h>
-#include <asm/percpu.h>
-#include <asm/asm.h>
-#include <asm/context_tracking.h>
-#include <asm/smap.h>
-#include <asm/pgtable_types.h>
-#include <linux/err.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE	   0x40000000
-
-	.code64
-	.section .entry.text, "ax"
-
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
-	swapgs
-	sysretq
-ENDPROC(native_usergs_sysret64)
-#endif /* CONFIG_PARAVIRT */
-
-
-.macro TRACE_IRQS_IRETQ
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bt   $9,EFLAGS(%rsp)	/* interrupts off? */
-	jnc  1f
-	TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * When dynamic function tracer is enabled it will add a breakpoint
- * to all locations that it is about to modify, sync CPUs, update
- * all the code, sync CPUs, then remove the breakpoints. In this time
- * if lockdep is enabled, it might jump back into the debug handler
- * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
- *
- * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
- * make sure the stack pointer does not get reset back to the top
- * of the debug stack, and instead just reuses the current stack.
- */
-#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
-
-.macro TRACE_IRQS_OFF_DEBUG
-	call debug_stack_set_zero
-	TRACE_IRQS_OFF
-	call debug_stack_reset
-.endm
-
-.macro TRACE_IRQS_ON_DEBUG
-	call debug_stack_set_zero
-	TRACE_IRQS_ON
-	call debug_stack_reset
-.endm
-
-.macro TRACE_IRQS_IRETQ_DEBUG
-	bt   $9,EFLAGS(%rsp)	/* interrupts off? */
-	jnc  1f
-	TRACE_IRQS_ON_DEBUG
-1:
-.endm
-
-#else
-# define TRACE_IRQS_OFF_DEBUG		TRACE_IRQS_OFF
-# define TRACE_IRQS_ON_DEBUG		TRACE_IRQS_ON
-# define TRACE_IRQS_IRETQ_DEBUG		TRACE_IRQS_IRETQ
-#endif
-
-/*
- * empty frame
- */
-	.macro EMPTY_FRAME start=1 offset=0
-	.if \start
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA rsp,8+\offset
-	.else
-	CFI_DEF_CFA_OFFSET 8+\offset
-	.endif
-	.endm
-
-/*
- * initial frame state for interrupts (and exceptions without error code)
- */
-	.macro INTR_FRAME start=1 offset=0
-	EMPTY_FRAME \start, 5*8+\offset
-	/*CFI_REL_OFFSET ss, 4*8+\offset*/
-	CFI_REL_OFFSET rsp, 3*8+\offset
-	/*CFI_REL_OFFSET rflags, 2*8+\offset*/
-	/*CFI_REL_OFFSET cs, 1*8+\offset*/
-	CFI_REL_OFFSET rip, 0*8+\offset
-	.endm
-
-/*
- * initial frame state for exceptions with error code (and interrupts
- * with vector already pushed)
- */
-	.macro XCPT_FRAME start=1 offset=0
-	INTR_FRAME \start, 1*8+\offset
-	.endm
-
-/*
- * frame that enables passing a complete pt_regs to a C function.
- */
-	.macro DEFAULT_FRAME start=1 offset=0
-	XCPT_FRAME \start, ORIG_RAX+\offset
-	CFI_REL_OFFSET rdi, RDI+\offset
-	CFI_REL_OFFSET rsi, RSI+\offset
-	CFI_REL_OFFSET rdx, RDX+\offset
-	CFI_REL_OFFSET rcx, RCX+\offset
-	CFI_REL_OFFSET rax, RAX+\offset
-	CFI_REL_OFFSET r8, R8+\offset
-	CFI_REL_OFFSET r9, R9+\offset
-	CFI_REL_OFFSET r10, R10+\offset
-	CFI_REL_OFFSET r11, R11+\offset
-	CFI_REL_OFFSET rbx, RBX+\offset
-	CFI_REL_OFFSET rbp, RBP+\offset
-	CFI_REL_OFFSET r12, R12+\offset
-	CFI_REL_OFFSET r13, R13+\offset
-	CFI_REL_OFFSET r14, R14+\offset
-	CFI_REL_OFFSET r15, R15+\offset
-	.endm
-
-/*
- * 64bit SYSCALL instruction entry. Up to 6 arguments in registers.
- *
- * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
- *
- * Registers on entry:
- * rax  system call number
- * rcx  return address
- * r11  saved rflags (note: r11 is callee-clobbered register in C ABI)
- * rdi  arg0
- * rsi  arg1
- * rdx  arg2
- * r10  arg3 (needs to be moved to rcx to conform to C ABI)
- * r8   arg4
- * r9   arg5
- * (note: r12-r15,rbp,rbx are callee-preserved in C ABI)
- *
- * Only called from user space.
- *
- * When user can change pt_regs->foo always force IRET. That is because
- * it deals with uncanonical addresses better. SYSRET has trouble
- * with them due to bugs in both AMD and Intel CPUs.
- */
-
-ENTRY(system_call)
-	CFI_STARTPROC	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,0
-	CFI_REGISTER	rip,rcx
-	/*CFI_REGISTER	rflags,r11*/
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	SWAPGS_UNSAFE_STACK
-	/*
-	 * A hypervisor implementation might want to use a label
-	 * after the swapgs, so that it can do the swapgs
-	 * for the guest and jump here on syscall.
-	 */
-GLOBAL(system_call_after_swapgs)
-
-	movq	%rsp,PER_CPU_VAR(rsp_scratch)
-	movq	PER_CPU_VAR(kernel_stack),%rsp
-
-	/* Construct struct pt_regs on stack */
-	pushq_cfi $__USER_DS			/* pt_regs->ss */
-	pushq_cfi PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
-	/*
-	 * Re-enable interrupts.
-	 * We use 'rsp_scratch' as a scratch space, hence irq-off block above
-	 * must execute atomically in the face of possible interrupt-driven
-	 * task preemption. We must enable interrupts only after we're done
-	 * with using rsp_scratch:
-	 */
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi	%r11			/* pt_regs->flags */
-	pushq_cfi	$__USER_CS		/* pt_regs->cs */
-	pushq_cfi	%rcx			/* pt_regs->ip */
-	CFI_REL_OFFSET rip,0
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rcx			/* pt_regs->cx */
-	pushq_cfi	$-ENOSYS		/* pt_regs->ax */
-	pushq_cfi_reg	r8			/* pt_regs->r8 */
-	pushq_cfi_reg	r9			/* pt_regs->r9 */
-	pushq_cfi_reg	r10			/* pt_regs->r10 */
-	pushq_cfi_reg	r11			/* pt_regs->r11 */
-	sub	$(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 6*8
-
-	testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz tracesys
-system_call_fastpath:
-#if __SYSCALL_MASK == ~0
-	cmpq $__NR_syscall_max,%rax
-#else
-	andl $__SYSCALL_MASK,%eax
-	cmpl $__NR_syscall_max,%eax
-#endif
-	ja	1f	/* return -ENOSYS (already in pt_regs->ax) */
-	movq %r10,%rcx
-	call *sys_call_table(,%rax,8)
-	movq %rax,RAX(%rsp)
-1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
-	LOCKDEP_SYS_EXIT
-	/*
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	DISABLE_INTERRUPTS(CLBR_NONE)
-
-	/*
-	 * We must check ti flags with interrupts (or at least preemption)
-	 * off because we must *never* return to userspace without
-	 * processing exit work that is enqueued if we're preempted here.
-	 * In particular, returning to userspace with any of the one-shot
-	 * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
-	 * very bad.
-	 */
-	testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz int_ret_from_sys_call_irqs_off	/* Go to the slow path */
-
-	CFI_REMEMBER_STATE
-
-	RESTORE_C_REGS_EXCEPT_RCX_R11
-	movq	RIP(%rsp),%rcx
-	CFI_REGISTER	rip,rcx
-	movq	EFLAGS(%rsp),%r11
-	/*CFI_REGISTER	rflags,r11*/
-	movq	RSP(%rsp),%rsp
-	/*
-	 * 64bit SYSRET restores rip from rcx,
-	 * rflags from r11 (but RF and VM bits are forced to 0),
-	 * cs and ss are loaded from MSRs.
-	 * Restoration of rflags re-enables interrupts.
-	 *
-	 * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
-	 * descriptor is not reinitialized.  This means that we should
-	 * avoid SYSRET with SS == NULL, which could happen if we schedule,
-	 * exit the kernel, and re-enter using an interrupt vector.  (All
-	 * interrupt entries on x86_64 set SS to NULL.)  We prevent that
-	 * from happening by reloading SS in __switch_to.  (Actually
-	 * detecting the failure in 64-bit userspace is tricky but can be
-	 * done.)
-	 */
-	USERGS_SYSRET64
-
-	CFI_RESTORE_STATE
-
-	/* Do syscall entry tracing */
-tracesys:
-	movq %rsp, %rdi
-	movl $AUDIT_ARCH_X86_64, %esi
-	call syscall_trace_enter_phase1
-	test %rax, %rax
-	jnz tracesys_phase2		/* if needed, run the slow path */
-	RESTORE_C_REGS_EXCEPT_RAX	/* else restore clobbered regs */
-	movq ORIG_RAX(%rsp), %rax
-	jmp system_call_fastpath	/*      and return to the fast path */
-
-tracesys_phase2:
-	SAVE_EXTRA_REGS
-	movq %rsp, %rdi
-	movl $AUDIT_ARCH_X86_64, %esi
-	movq %rax,%rdx
-	call syscall_trace_enter_phase2
-
-	/*
-	 * Reload registers from stack in case ptrace changed them.
-	 * We don't reload %rax because syscall_trace_entry_phase2() returned
-	 * the value it wants us to use in the table lookup.
-	 */
-	RESTORE_C_REGS_EXCEPT_RAX
-	RESTORE_EXTRA_REGS
-#if __SYSCALL_MASK == ~0
-	cmpq $__NR_syscall_max,%rax
-#else
-	andl $__SYSCALL_MASK,%eax
-	cmpl $__NR_syscall_max,%eax
-#endif
-	ja	1f	/* return -ENOSYS (already in pt_regs->ax) */
-	movq %r10,%rcx	/* fixup for C */
-	call *sys_call_table(,%rax,8)
-	movq %rax,RAX(%rsp)
-1:
-	/* Use IRET because user could have changed pt_regs->foo */
-
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */
-	TRACE_IRQS_OFF
-	movl $_TIF_ALLWORK_MASK,%edi
-	/* edi:	mask to check */
-GLOBAL(int_with_check)
-	LOCKDEP_SYS_EXIT_IRQ
-	GET_THREAD_INFO(%rcx)
-	movl TI_flags(%rcx),%edx
-	andl %edi,%edx
-	jnz   int_careful
-	andl	$~TS_COMPAT,TI_status(%rcx)
-	jmp	syscall_return
-
-	/* Either reschedule or signal or syscall exit tracking needed. */
-	/* First do a reschedule test. */
-	/* edx:	work, edi: workmask */
-int_careful:
-	bt $TIF_NEED_RESCHED,%edx
-	jnc  int_very_careful
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi %rdi
-	SCHEDULE_USER
-	popq_cfi %rdi
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp int_with_check
-
-	/* handle signals and tracing -- both require a full pt_regs */
-int_very_careful:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	SAVE_EXTRA_REGS
-	/* Check for syscall exit trace */
-	testl $_TIF_WORK_SYSCALL_EXIT,%edx
-	jz int_signal
-	pushq_cfi %rdi
-	leaq 8(%rsp),%rdi	# &ptregs -> arg1
-	call syscall_trace_leave
-	popq_cfi %rdi
-	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
-	jmp int_restore_rest
-
-int_signal:
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz 1f
-	movq %rsp,%rdi		# &ptregs -> arg1
-	xorl %esi,%esi		# oldset -> arg2
-	call do_notify_resume
-1:	movl $_TIF_WORK_MASK,%edi
-int_restore_rest:
-	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp int_with_check
-
-syscall_return:
-	/* The IRETQ could re-enable interrupts: */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_IRETQ
-
-	/*
-	 * Try to use SYSRET instead of IRET if we're returning to
-	 * a completely clean 64-bit userspace context.
-	 */
-	movq RCX(%rsp),%rcx
-	cmpq %rcx,RIP(%rsp)		/* RCX == RIP */
-	jne opportunistic_sysret_failed
-
-	/*
-	 * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
-	 * in kernel space.  This essentially lets the user take over
-	 * the kernel, since userspace controls RSP.  It's not worth
-	 * testing for canonicalness exactly -- this check detects any
-	 * of the 17 high bits set, which is true for non-canonical
-	 * or kernel addresses.  (This will pessimize vsyscall=native.
-	 * Big deal.)
-	 *
-	 * If virtual addresses ever become wider, this will need
-	 * to be updated to remain correct on both old and new CPUs.
-	 */
-	.ifne __VIRTUAL_MASK_SHIFT - 47
-	.error "virtual address width changed -- SYSRET checks need update"
-	.endif
-	shr $__VIRTUAL_MASK_SHIFT, %rcx
-	jnz opportunistic_sysret_failed
-
-	cmpq $__USER_CS,CS(%rsp)	/* CS must match SYSRET */
-	jne opportunistic_sysret_failed
-
-	movq R11(%rsp),%r11
-	cmpq %r11,EFLAGS(%rsp)		/* R11 == RFLAGS */
-	jne opportunistic_sysret_failed
-
-	/*
-	 * SYSRET can't restore RF.  SYSRET can restore TF, but unlike IRET,
-	 * restoring TF results in a trap from userspace immediately after
-	 * SYSRET.  This would cause an infinite loop whenever #DB happens
-	 * with register state that satisfies the opportunistic SYSRET
-	 * conditions.  For example, single-stepping this user code:
-	 *
-	 *           movq $stuck_here,%rcx
-	 *           pushfq
-	 *           popq %r11
-	 *   stuck_here:
-	 *
-	 * would never get past 'stuck_here'.
-	 */
-	testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
-	jnz opportunistic_sysret_failed
-
-	/* nothing to check for RSP */
-
-	cmpq $__USER_DS,SS(%rsp)	/* SS must match SYSRET */
-	jne opportunistic_sysret_failed
-
-	/*
-	 * We win!  This label is here just for ease of understanding
-	 * perf profiles.  Nothing jumps here.
-	 */
-syscall_return_via_sysret:
-	CFI_REMEMBER_STATE
-	/* r11 is already restored (see code above) */
-	RESTORE_C_REGS_EXCEPT_R11
-	movq RSP(%rsp),%rsp
-	USERGS_SYSRET64
-	CFI_RESTORE_STATE
-
-opportunistic_sysret_failed:
-	SWAPGS
-	jmp	restore_c_regs_and_iret
-	CFI_ENDPROC
-END(system_call)
-
-
-	.macro FORK_LIKE func
-ENTRY(stub_\func)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8		/* offset 8: return address */
-	SAVE_EXTRA_REGS 8
-	jmp sys_\func
-	CFI_ENDPROC
-END(stub_\func)
-	.endm
-
-	FORK_LIKE  clone
-	FORK_LIKE  fork
-	FORK_LIKE  vfork
-
-ENTRY(stub_execve)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
-	call	sys_execve
-return_from_execve:
-	testl	%eax, %eax
-	jz	1f
-	/* exec failed, can use fast SYSRET code path in this case */
-	ret
-1:
-	/* must use IRET code path (pt_regs->cs may have changed) */
-	addq	$8, %rsp
-	CFI_ADJUST_CFA_OFFSET -8
-	ZERO_EXTRA_REGS
-	movq	%rax,RAX(%rsp)
-	jmp	int_ret_from_sys_call
-	CFI_ENDPROC
-END(stub_execve)
-/*
- * Remaining execve stubs are only 7 bytes long.
- * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
- */
-	.align	8
-GLOBAL(stub_execveat)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
-	call	sys_execveat
-	jmp	return_from_execve
-	CFI_ENDPROC
-END(stub_execveat)
-
-#ifdef CONFIG_X86_X32_ABI
-	.align	8
-GLOBAL(stub_x32_execve)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
-	call	compat_sys_execve
-	jmp	return_from_execve
-	CFI_ENDPROC
-END(stub_x32_execve)
-	.align	8
-GLOBAL(stub_x32_execveat)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
-	call	compat_sys_execveat
-	jmp	return_from_execve
-	CFI_ENDPROC
-END(stub_x32_execveat)
-#endif
-
-#ifdef CONFIG_IA32_EMULATION
-	.align	8
-GLOBAL(stub32_execve)
-	CFI_STARTPROC
-	call	compat_sys_execve
-	jmp	return_from_execve
-	CFI_ENDPROC
-END(stub32_execve)
-	.align	8
-GLOBAL(stub32_execveat)
-	CFI_STARTPROC
-	call	compat_sys_execveat
-	jmp	return_from_execve
-	CFI_ENDPROC
-END(stub32_execveat)
-#endif
-
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */
-ENTRY(stub_rt_sigreturn)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
-	/*
-	 * SAVE_EXTRA_REGS result is not normally needed:
-	 * sigreturn overwrites all pt_regs->GPREGS.
-	 * But sigreturn can fail (!), and there is no easy way to detect that.
-	 * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
-	 * we SAVE_EXTRA_REGS here.
-	 */
-	SAVE_EXTRA_REGS 8
-	call sys_rt_sigreturn
-return_from_stub:
-	addq	$8, %rsp
-	CFI_ADJUST_CFA_OFFSET -8
-	RESTORE_EXTRA_REGS
-	movq %rax,RAX(%rsp)
-	jmp int_ret_from_sys_call
-	CFI_ENDPROC
-END(stub_rt_sigreturn)
-
-#ifdef CONFIG_X86_X32_ABI
-ENTRY(stub_x32_rt_sigreturn)
-	CFI_STARTPROC
-	DEFAULT_FRAME 0, 8
-	SAVE_EXTRA_REGS 8
-	call sys32_x32_rt_sigreturn
-	jmp  return_from_stub
-	CFI_ENDPROC
-END(stub_x32_rt_sigreturn)
-#endif
-
-/*
- * A newly forked process directly context switches into this address.
- *
- * rdi: prev task we switched from
- */
-ENTRY(ret_from_fork)
-	DEFAULT_FRAME
-
-	LOCK ; btr $TIF_FORK,TI_flags(%r8)
-
-	pushq_cfi $0x0002
-	popfq_cfi				# reset kernel eflags
-
-	call schedule_tail			# rdi: 'prev' task parameter
-
-	RESTORE_EXTRA_REGS
-
-	testl $3,CS(%rsp)			# from kernel_thread?
-
-	/*
-	 * By the time we get here, we have no idea whether our pt_regs,
-	 * ti flags, and ti status came from the 64-bit SYSCALL fast path,
-	 * the slow path, or one of the ia32entry paths.
-	 * Use IRET code path to return, since it can safely handle
-	 * all of the above.
-	 */
-	jnz	int_ret_from_sys_call
-
-	/* We came from kernel_thread */
-	/* nb: we depend on RESTORE_EXTRA_REGS above */
-	movq %rbp, %rdi
-	call *%rbx
-	movl $0, RAX(%rsp)
-	RESTORE_EXTRA_REGS
-	jmp int_ret_from_sys_call
-	CFI_ENDPROC
-END(ret_from_fork)
-
-/*
- * Build the entry stubs with some assembler magic.
- * We pack 1 stub into every 8-byte block.
- */
-	.align 8
-ENTRY(irq_entries_start)
-	INTR_FRAME
-    vector=FIRST_EXTERNAL_VECTOR
-    .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
-	pushq_cfi $(~vector+0x80)	/* Note: always in signed byte range */
-    vector=vector+1
-	jmp	common_interrupt
-	CFI_ADJUST_CFA_OFFSET -8
-	.align	8
-    .endr
-	CFI_ENDPROC
-END(irq_entries_start)
-
-/*
- * Interrupt entry/exit.
- *
- * Interrupt entry points save only callee clobbered registers in fast path.
- *
- * Entry runs with interrupts off.
- */
-
-/* 0(%rsp): ~(interrupt number) */
-	.macro interrupt func
-	cld
-	/*
-	 * Since nothing in interrupt handling code touches r12...r15 members
-	 * of "struct pt_regs", and since interrupts can nest, we can save
-	 * four stack slots and simultaneously provide
-	 * an unwind-friendly stack layout by saving "truncated" pt_regs
-	 * exactly up to rbp slot, without these members.
-	 */
-	ALLOC_PT_GPREGS_ON_STACK -RBP
-	SAVE_C_REGS -RBP
-	/* this goes to 0(%rsp) for unwinder, not for saving the value: */
-	SAVE_EXTRA_REGS_RBP -RBP
-
-	leaq -RBP(%rsp),%rdi	/* arg1 for \func (pointer to pt_regs) */
-
-	testl $3, CS-RBP(%rsp)
-	je 1f
-	SWAPGS
-1:
-	/*
-	 * Save previous stack pointer, optionally switch to interrupt stack.
-	 * irq_count is used to check if a CPU is already on an interrupt stack
-	 * or not. While this is essentially redundant with preempt_count it is
-	 * a little cheaper to use a separate counter in the PDA (short of
-	 * moving irq_enter into assembly, which would be too much work)
-	 */
-	movq %rsp, %rsi
-	incl PER_CPU_VAR(irq_count)
-	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
-	CFI_DEF_CFA_REGISTER	rsi
-	pushq %rsi
-	/*
-	 * For debugger:
-	 * "CFA (Current Frame Address) is the value on stack + offset"
-	 */
-	CFI_ESCAPE	0x0f /* DW_CFA_def_cfa_expression */, 6, \
-			0x77 /* DW_OP_breg7 (rsp) */, 0, \
-			0x06 /* DW_OP_deref */, \
-			0x08 /* DW_OP_const1u */, SIZEOF_PTREGS-RBP, \
-			0x22 /* DW_OP_plus */
-	/* We entered an interrupt context - irqs are off: */
-	TRACE_IRQS_OFF
-
-	call \func
-	.endm
-
-	/*
-	 * The interrupt stubs push (~vector+0x80) onto the stack and
-	 * then jump to common_interrupt.
-	 */
-	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
-	XCPT_FRAME
-	ASM_CLAC
-	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
-	interrupt do_IRQ
-	/* 0(%rsp): old RSP */
-ret_from_intr:
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	decl PER_CPU_VAR(irq_count)
-
-	/* Restore saved previous stack */
-	popq %rsi
-	CFI_DEF_CFA rsi,SIZEOF_PTREGS-RBP /* reg/off reset after def_cfa_expr */
-	/* return code expects complete pt_regs - adjust rsp accordingly: */
-	leaq -RBP(%rsi),%rsp
-	CFI_DEF_CFA_REGISTER	rsp
-	CFI_ADJUST_CFA_OFFSET	RBP
-
-	testl $3,CS(%rsp)
-	je retint_kernel
-	/* Interrupt came from user space */
-
-	GET_THREAD_INFO(%rcx)
-	/*
-	 * %rcx: thread info. Interrupts off.
-	 */
-retint_with_reschedule:
-	movl $_TIF_WORK_MASK,%edi
-retint_check:
-	LOCKDEP_SYS_EXIT_IRQ
-	movl TI_flags(%rcx),%edx
-	andl %edi,%edx
-	CFI_REMEMBER_STATE
-	jnz  retint_careful
-
-retint_swapgs:		/* return to user-space */
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_IRETQ
-
-	SWAPGS
-	jmp	restore_c_regs_and_iret
-
-/* Returning to kernel space */
-retint_kernel:
-#ifdef CONFIG_PREEMPT
-	/* Interrupts are off */
-	/* Check if we need preemption */
-	bt	$9,EFLAGS(%rsp)	/* interrupts were off? */
-	jnc	1f
-0:	cmpl	$0,PER_CPU_VAR(__preempt_count)
-	jnz	1f
-	call	preempt_schedule_irq
-	jmp	0b
-1:
-#endif
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	TRACE_IRQS_IRETQ
-
-/*
- * At this label, code paths which return to kernel and to user,
- * which come from interrupts/exception and from syscalls, merge.
- */
-restore_c_regs_and_iret:
-	RESTORE_C_REGS
-	REMOVE_PT_GPREGS_FROM_STACK 8
-
-irq_return:
-	INTERRUPT_RETURN
-
-ENTRY(native_iret)
-	/*
-	 * Are we returning to a stack segment from the LDT?  Note: in
-	 * 64-bit mode SS:RSP on the exception stack is always valid.
-	 */
-#ifdef CONFIG_X86_ESPFIX64
-	testb $4,(SS-RIP)(%rsp)
-	jnz native_irq_return_ldt
-#endif
-
-.global native_irq_return_iret
-native_irq_return_iret:
-	/*
-	 * This may fault.  Non-paranoid faults on return to userspace are
-	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
-	 * Double-faults due to espfix64 are handled in do_double_fault.
-	 * Other faults here are fatal.
-	 */
-	iretq
-
-#ifdef CONFIG_X86_ESPFIX64
-native_irq_return_ldt:
-	pushq_cfi %rax
-	pushq_cfi %rdi
-	SWAPGS
-	movq PER_CPU_VAR(espfix_waddr),%rdi
-	movq %rax,(0*8)(%rdi)	/* RAX */
-	movq (2*8)(%rsp),%rax	/* RIP */
-	movq %rax,(1*8)(%rdi)
-	movq (3*8)(%rsp),%rax	/* CS */
-	movq %rax,(2*8)(%rdi)
-	movq (4*8)(%rsp),%rax	/* RFLAGS */
-	movq %rax,(3*8)(%rdi)
-	movq (6*8)(%rsp),%rax	/* SS */
-	movq %rax,(5*8)(%rdi)
-	movq (5*8)(%rsp),%rax	/* RSP */
-	movq %rax,(4*8)(%rdi)
-	andl $0xffff0000,%eax
-	popq_cfi %rdi
-	orq PER_CPU_VAR(espfix_stack),%rax
-	SWAPGS
-	movq %rax,%rsp
-	popq_cfi %rax
-	jmp native_irq_return_iret
-#endif
-
-	/* edi: workmask, edx: work */
-retint_careful:
-	CFI_RESTORE_STATE
-	bt    $TIF_NEED_RESCHED,%edx
-	jnc   retint_signal
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi %rdi
-	SCHEDULE_USER
-	popq_cfi %rdi
-	GET_THREAD_INFO(%rcx)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp retint_check
-
-retint_signal:
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz    retint_swapgs
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	SAVE_EXTRA_REGS
-	movq $-1,ORIG_RAX(%rsp)
-	xorl %esi,%esi		# oldset
-	movq %rsp,%rdi		# &pt_regs
-	call do_notify_resume
-	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)
-	jmp retint_with_reschedule
-
-	CFI_ENDPROC
-END(common_interrupt)
-
-/*
- * APIC interrupts.
- */
-.macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
-	INTR_FRAME
-	ASM_CLAC
-	pushq_cfi $~(\num)
-.Lcommon_\sym:
-	interrupt \do_sym
-	jmp ret_from_intr
-	CFI_ENDPROC
-END(\sym)
-.endm
-
-#ifdef CONFIG_TRACING
-#define trace(sym) trace_##sym
-#define smp_trace(sym) smp_trace_##sym
-
-.macro trace_apicinterrupt num sym
-apicinterrupt3 \num trace(\sym) smp_trace(\sym)
-.endm
-#else
-.macro trace_apicinterrupt num sym do_sym
-.endm
-#endif
-
-.macro apicinterrupt num sym do_sym
-apicinterrupt3 \num \sym \do_sym
-trace_apicinterrupt \num \sym
-.endm
-
-#ifdef CONFIG_SMP
-apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \
-	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
-apicinterrupt3 REBOOT_VECTOR \
-	reboot_interrupt smp_reboot_interrupt
-#endif
-
-#ifdef CONFIG_X86_UV
-apicinterrupt3 UV_BAU_MESSAGE \
-	uv_bau_message_intr1 uv_bau_message_interrupt
-#endif
-apicinterrupt LOCAL_TIMER_VECTOR \
-	apic_timer_interrupt smp_apic_timer_interrupt
-apicinterrupt X86_PLATFORM_IPI_VECTOR \
-	x86_platform_ipi smp_x86_platform_ipi
-
-#ifdef CONFIG_HAVE_KVM
-apicinterrupt3 POSTED_INTR_VECTOR \
-	kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
-#endif
-
-#ifdef CONFIG_X86_MCE_THRESHOLD
-apicinterrupt THRESHOLD_APIC_VECTOR \
-	threshold_interrupt smp_threshold_interrupt
-#endif
-
-#ifdef CONFIG_X86_THERMAL_VECTOR
-apicinterrupt THERMAL_APIC_VECTOR \
-	thermal_interrupt smp_thermal_interrupt
-#endif
-
-#ifdef CONFIG_SMP
-apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
-	call_function_single_interrupt smp_call_function_single_interrupt
-apicinterrupt CALL_FUNCTION_VECTOR \
-	call_function_interrupt smp_call_function_interrupt
-apicinterrupt RESCHEDULE_VECTOR \
-	reschedule_interrupt smp_reschedule_interrupt
-#endif
-
-apicinterrupt ERROR_APIC_VECTOR \
-	error_interrupt smp_error_interrupt
-apicinterrupt SPURIOUS_APIC_VECTOR \
-	spurious_interrupt smp_spurious_interrupt
-
-#ifdef CONFIG_IRQ_WORK
-apicinterrupt IRQ_WORK_VECTOR \
-	irq_work_interrupt smp_irq_work_interrupt
-#endif
-
-/*
- * Exception entry points.
- */
-#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
-
-.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
-ENTRY(\sym)
-	/* Sanity check */
-	.if \shift_ist != -1 && \paranoid == 0
-	.error "using shift_ist requires paranoid=1"
-	.endif
-
-	.if \has_error_code
-	XCPT_FRAME
-	.else
-	INTR_FRAME
-	.endif
-
-	ASM_CLAC
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-
-	.ifeq \has_error_code
-	pushq_cfi $-1			/* ORIG_RAX: no syscall to restart */
-	.endif
-
-	ALLOC_PT_GPREGS_ON_STACK
-
-	.if \paranoid
-	.if \paranoid == 1
-	CFI_REMEMBER_STATE
-	testl $3, CS(%rsp)		/* If coming from userspace, switch */
-	jnz 1f				/* stacks. */
-	.endif
-	call paranoid_entry
-	.else
-	call error_entry
-	.endif
-	/* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
-
-	DEFAULT_FRAME 0
-
-	.if \paranoid
-	.if \shift_ist != -1
-	TRACE_IRQS_OFF_DEBUG		/* reload IDT in case of recursion */
-	.else
-	TRACE_IRQS_OFF
-	.endif
-	.endif
-
-	movq %rsp,%rdi			/* pt_regs pointer */
-
-	.if \has_error_code
-	movq ORIG_RAX(%rsp),%rsi	/* get error code */
-	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
-	.else
-	xorl %esi,%esi			/* no error code */
-	.endif
-
-	.if \shift_ist != -1
-	subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
-	.endif
-
-	call \do_sym
-
-	.if \shift_ist != -1
-	addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
-	.endif
-
-	/* these procedures expect "no swapgs" flag in ebx */
-	.if \paranoid
-	jmp paranoid_exit
-	.else
-	jmp error_exit
-	.endif
-
-	.if \paranoid == 1
-	CFI_RESTORE_STATE
-	/*
-	 * Paranoid entry from userspace.  Switch stacks and treat it
-	 * as a normal entry.  This means that paranoid handlers
-	 * run in real process context if user_mode(regs).
-	 */
-1:
-	call error_entry
-
-	DEFAULT_FRAME 0
-
-	movq %rsp,%rdi			/* pt_regs pointer */
-	call sync_regs
-	movq %rax,%rsp			/* switch stack */
-
-	movq %rsp,%rdi			/* pt_regs pointer */
-
-	.if \has_error_code
-	movq ORIG_RAX(%rsp),%rsi	/* get error code */
-	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
-	.else
-	xorl %esi,%esi			/* no error code */
-	.endif
-
-	call \do_sym
-
-	jmp error_exit			/* %ebx: no swapgs flag */
-	.endif
-
-	CFI_ENDPROC
-END(\sym)
-.endm
-
-#ifdef CONFIG_TRACING
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#else
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#endif
-
-idtentry divide_error do_divide_error has_error_code=0
-idtentry overflow do_overflow has_error_code=0
-idtentry bounds do_bounds has_error_code=0
-idtentry invalid_op do_invalid_op has_error_code=0
-idtentry device_not_available do_device_not_available has_error_code=0
-idtentry double_fault do_double_fault has_error_code=1 paranoid=2
-idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
-idtentry invalid_TSS do_invalid_TSS has_error_code=1
-idtentry segment_not_present do_segment_not_present has_error_code=1
-idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0
-idtentry coprocessor_error do_coprocessor_error has_error_code=0
-idtentry alignment_check do_alignment_check has_error_code=1
-idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
-
-
-	/* Reload gs selector with exception handling */
-	/* edi:  new selector */
-ENTRY(native_load_gs_index)
-	CFI_STARTPROC
-	pushfq_cfi
-	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
-	SWAPGS
-gs_change:
-	movl %edi,%gs
-2:	mfence		/* workaround */
-	SWAPGS
-	popfq_cfi
-	ret
-	CFI_ENDPROC
-END(native_load_gs_index)
-
-	_ASM_EXTABLE(gs_change,bad_gs)
-	.section .fixup,"ax"
-	/* running with kernelgs */
-bad_gs:
-	SWAPGS			/* switch back to user gs */
-	xorl %eax,%eax
-	movl %eax,%gs
-	jmp  2b
-	.previous
-
-/* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(do_softirq_own_stack)
-	CFI_STARTPROC
-	pushq_cfi %rbp
-	CFI_REL_OFFSET rbp,0
-	mov  %rsp,%rbp
-	CFI_DEF_CFA_REGISTER rbp
-	incl PER_CPU_VAR(irq_count)
-	cmove PER_CPU_VAR(irq_stack_ptr),%rsp
-	push  %rbp			# backlink for old unwinder
-	call __do_softirq
-	leaveq
-	CFI_RESTORE		rbp
-	CFI_DEF_CFA_REGISTER	rsp
-	CFI_ADJUST_CFA_OFFSET   -8
-	decl PER_CPU_VAR(irq_count)
-	ret
-	CFI_ENDPROC
-END(do_softirq_own_stack)
-
-#ifdef CONFIG_XEN
-idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
-
-/*
- * A note on the "critical region" in our callback handler.
- * We want to avoid stacking callback handlers due to events occurring
- * during handling of the last event. To do this, we keep events disabled
- * until we've done all processing. HOWEVER, we must enable events before
- * popping the stack frame (can't be done atomically) and so it would still
- * be possible to get enough handler activations to overflow the stack.
- * Although unlikely, bugs of that kind are hard to track down, so we'd
- * like to avoid the possibility.
- * So, on entry to the handler we detect whether we interrupted an
- * existing activation in its critical region -- if so, we pop the current
- * activation and restart the handler using the previous one.
- */
-ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
-	CFI_STARTPROC
-/*
- * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
- * see the correct pointer to the pt_regs
- */
-	movq %rdi, %rsp            # we don't return, adjust the stack frame
-	CFI_ENDPROC
-	DEFAULT_FRAME
-11:	incl PER_CPU_VAR(irq_count)
-	movq %rsp,%rbp
-	CFI_DEF_CFA_REGISTER rbp
-	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
-	pushq %rbp			# backlink for old unwinder
-	call xen_evtchn_do_upcall
-	popq %rsp
-	CFI_DEF_CFA_REGISTER rsp
-	decl PER_CPU_VAR(irq_count)
-#ifndef CONFIG_PREEMPT
-	call xen_maybe_preempt_hcall
-#endif
-	jmp  error_exit
-	CFI_ENDPROC
-END(xen_do_hypervisor_callback)
-
-/*
- * Hypervisor uses this for application faults while it executes.
- * We get here for two reasons:
- *  1. Fault while reloading DS, ES, FS or GS
- *  2. Fault while executing IRET
- * Category 1 we do not need to fix up as Xen has already reloaded all segment
- * registers that could be reloaded and zeroed the others.
- * Category 2 we fix up by killing the current process. We cannot use the
- * normal Linux return path in this case because if we use the IRET hypercall
- * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
- * We distinguish between categories by comparing each saved segment register
- * with its current contents: any discrepancy means we in category 1.
- */
-ENTRY(xen_failsafe_callback)
-	INTR_FRAME 1 (6*8)
-	/*CFI_REL_OFFSET gs,GS*/
-	/*CFI_REL_OFFSET fs,FS*/
-	/*CFI_REL_OFFSET es,ES*/
-	/*CFI_REL_OFFSET ds,DS*/
-	CFI_REL_OFFSET r11,8
-	CFI_REL_OFFSET rcx,0
-	movw %ds,%cx
-	cmpw %cx,0x10(%rsp)
-	CFI_REMEMBER_STATE
-	jne 1f
-	movw %es,%cx
-	cmpw %cx,0x18(%rsp)
-	jne 1f
-	movw %fs,%cx
-	cmpw %cx,0x20(%rsp)
-	jne 1f
-	movw %gs,%cx
-	cmpw %cx,0x28(%rsp)
-	jne 1f
-	/* All segments match their saved values => Category 2 (Bad IRET). */
-	movq (%rsp),%rcx
-	CFI_RESTORE rcx
-	movq 8(%rsp),%r11
-	CFI_RESTORE r11
-	addq $0x30,%rsp
-	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq_cfi $0	/* RIP */
-	pushq_cfi %r11
-	pushq_cfi %rcx
-	jmp general_protection
-	CFI_RESTORE_STATE
-1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
-	movq (%rsp),%rcx
-	CFI_RESTORE rcx
-	movq 8(%rsp),%r11
-	CFI_RESTORE r11
-	addq $0x30,%rsp
-	CFI_ADJUST_CFA_OFFSET -0x30
-	pushq_cfi $-1 /* orig_ax = -1 => not a system call */
-	ALLOC_PT_GPREGS_ON_STACK
-	SAVE_C_REGS
-	SAVE_EXTRA_REGS
-	jmp error_exit
-	CFI_ENDPROC
-END(xen_failsafe_callback)
-
-apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
-	xen_hvm_callback_vector xen_evtchn_do_upcall
-
-#endif /* CONFIG_XEN */
-
-#if IS_ENABLED(CONFIG_HYPERV)
-apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
-	hyperv_callback_vector hyperv_vector_handler
-#endif /* CONFIG_HYPERV */
-
-idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry stack_segment do_stack_segment has_error_code=1
-#ifdef CONFIG_XEN
-idtentry xen_debug do_debug has_error_code=0
-idtentry xen_int3 do_int3 has_error_code=0
-idtentry xen_stack_segment do_stack_segment has_error_code=1
-#endif
-idtentry general_protection do_general_protection has_error_code=1
-trace_idtentry page_fault do_page_fault has_error_code=1
-#ifdef CONFIG_KVM_GUEST
-idtentry async_page_fault do_async_page_fault has_error_code=1
-#endif
-#ifdef CONFIG_X86_MCE
-idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
-#endif
-
-/*
- * Save all registers in pt_regs, and switch gs if needed.
- * Use slow, but surefire "are we in kernel?" check.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
- */
-ENTRY(paranoid_entry)
-	XCPT_FRAME 1 15*8
-	cld
-	SAVE_C_REGS 8
-	SAVE_EXTRA_REGS 8
-	movl $1,%ebx
-	movl $MSR_GS_BASE,%ecx
-	rdmsr
-	testl %edx,%edx
-	js 1f	/* negative -> in kernel */
-	SWAPGS
-	xorl %ebx,%ebx
-1:	ret
-	CFI_ENDPROC
-END(paranoid_entry)
-
-/*
- * "Paranoid" exit path from exception stack.  This is invoked
- * only on return from non-NMI IST interrupts that came
- * from kernel space.
- *
- * We may be returning to very strange contexts (e.g. very early
- * in syscall entry), so checking for preemption here would
- * be complicated.  Fortunately, we there's no good reason
- * to try to handle preemption here.
- */
-/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
-ENTRY(paranoid_exit)
-	DEFAULT_FRAME
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF_DEBUG
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz paranoid_exit_no_swapgs
-	TRACE_IRQS_IRETQ
-	SWAPGS_UNSAFE_STACK
-	jmp paranoid_exit_restore
-paranoid_exit_no_swapgs:
-	TRACE_IRQS_IRETQ_DEBUG
-paranoid_exit_restore:
-	RESTORE_EXTRA_REGS
-	RESTORE_C_REGS
-	REMOVE_PT_GPREGS_FROM_STACK 8
-	INTERRUPT_RETURN
-	CFI_ENDPROC
-END(paranoid_exit)
-
-/*
- * Save all registers in pt_regs, and switch gs if needed.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
- */
-ENTRY(error_entry)
-	XCPT_FRAME 1 15*8
-	cld
-	SAVE_C_REGS 8
-	SAVE_EXTRA_REGS 8
-	xorl %ebx,%ebx
-	testl $3,CS+8(%rsp)
-	je error_kernelspace
-error_swapgs:
-	SWAPGS
-error_sti:
-	TRACE_IRQS_OFF
-	ret
-
-	/*
-	 * There are two places in the kernel that can potentially fault with
-	 * usergs. Handle them here.  B stepping K8s sometimes report a
-	 * truncated RIP for IRET exceptions returning to compat mode. Check
-	 * for these here too.
-	 */
-error_kernelspace:
-	CFI_REL_OFFSET rcx, RCX+8
-	incl %ebx
-	leaq native_irq_return_iret(%rip),%rcx
-	cmpq %rcx,RIP+8(%rsp)
-	je error_bad_iret
-	movl %ecx,%eax	/* zero extend */
-	cmpq %rax,RIP+8(%rsp)
-	je bstep_iret
-	cmpq $gs_change,RIP+8(%rsp)
-	je error_swapgs
-	jmp error_sti
-
-bstep_iret:
-	/* Fix truncated RIP */
-	movq %rcx,RIP+8(%rsp)
-	/* fall through */
-
-error_bad_iret:
-	SWAPGS
-	mov %rsp,%rdi
-	call fixup_bad_iret
-	mov %rax,%rsp
-	decl %ebx	/* Return to usergs */
-	jmp error_sti
-	CFI_ENDPROC
-END(error_entry)
-
-
-/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
-ENTRY(error_exit)
-	DEFAULT_FRAME
-	movl %ebx,%eax
-	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)
-	testl %eax,%eax
-	jne retint_kernel
-	LOCKDEP_SYS_EXIT_IRQ
-	movl TI_flags(%rcx),%edx
-	movl $_TIF_WORK_MASK,%edi
-	andl %edi,%edx
-	jnz retint_careful
-	jmp retint_swapgs
-	CFI_ENDPROC
-END(error_exit)
-
-/* Runs on exception stack */
-ENTRY(nmi)
-	INTR_FRAME
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	/*
-	 * We allow breakpoints in NMIs. If a breakpoint occurs, then
-	 * the iretq it performs will take us out of NMI context.
-	 * This means that we can have nested NMIs where the next
-	 * NMI is using the top of the stack of the previous NMI. We
-	 * can't let it execute because the nested NMI will corrupt the
-	 * stack of the previous NMI. NMI handlers are not re-entrant
-	 * anyway.
-	 *
-	 * To handle this case we do the following:
-	 *  Check the a special location on the stack that contains
-	 *  a variable that is set when NMIs are executing.
-	 *  The interrupted task's stack is also checked to see if it
-	 *  is an NMI stack.
-	 *  If the variable is not set and the stack is not the NMI
-	 *  stack then:
-	 *    o Set the special variable on the stack
-	 *    o Copy the interrupt frame into a "saved" location on the stack
-	 *    o Copy the interrupt frame into a "copy" location on the stack
-	 *    o Continue processing the NMI
-	 *  If the variable is set or the previous stack is the NMI stack:
-	 *    o Modify the "copy" location to jump to the repeate_nmi
-	 *    o return back to the first NMI
-	 *
-	 * Now on exit of the first NMI, we first clear the stack variable
-	 * The NMI stack will tell any nested NMIs at that point that it is
-	 * nested. Then we pop the stack normally with iret, and if there was
-	 * a nested NMI that updated the copy interrupt stack frame, a
-	 * jump will be made to the repeat_nmi code that will handle the second
-	 * NMI.
-	 */
-
-	/* Use %rdx as our temp variable throughout */
-	pushq_cfi %rdx
-	CFI_REL_OFFSET rdx, 0
-
-	/*
-	 * If %cs was not the kernel segment, then the NMI triggered in user
-	 * space, which means it is definitely not nested.
-	 */
-	cmpl $__KERNEL_CS, 16(%rsp)
-	jne first_nmi
-
-	/*
-	 * Check the special variable on the stack to see if NMIs are
-	 * executing.
-	 */
-	cmpl $1, -8(%rsp)
-	je nested_nmi
-
-	/*
-	 * Now test if the previous stack was an NMI stack.
-	 * We need the double check. We check the NMI stack to satisfy the
-	 * race when the first NMI clears the variable before returning.
-	 * We check the variable because the first NMI could be in a
-	 * breakpoint routine using a breakpoint stack.
-	 */
-	lea	6*8(%rsp), %rdx
-	/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
-	cmpq	%rdx, 4*8(%rsp)
-	/* If the stack pointer is above the NMI stack, this is a normal NMI */
-	ja	first_nmi
-	subq	$EXCEPTION_STKSZ, %rdx
-	cmpq	%rdx, 4*8(%rsp)
-	/* If it is below the NMI stack, it is a normal NMI */
-	jb	first_nmi
-	/* Ah, it is within the NMI stack, treat it as nested */
-
-	CFI_REMEMBER_STATE
-
-nested_nmi:
-	/*
-	 * Do nothing if we interrupted the fixup in repeat_nmi.
-	 * It's about to repeat the NMI handler, so we are fine
-	 * with ignoring this one.
-	 */
-	movq $repeat_nmi, %rdx
-	cmpq 8(%rsp), %rdx
-	ja 1f
-	movq $end_repeat_nmi, %rdx
-	cmpq 8(%rsp), %rdx
-	ja nested_nmi_out
-
-1:
-	/* Set up the interrupted NMIs stack to jump to repeat_nmi */
-	leaq -1*8(%rsp), %rdx
-	movq %rdx, %rsp
-	CFI_ADJUST_CFA_OFFSET 1*8
-	leaq -10*8(%rsp), %rdx
-	pushq_cfi $__KERNEL_DS
-	pushq_cfi %rdx
-	pushfq_cfi
-	pushq_cfi $__KERNEL_CS
-	pushq_cfi $repeat_nmi
-
-	/* Put stack back */
-	addq $(6*8), %rsp
-	CFI_ADJUST_CFA_OFFSET -6*8
-
-nested_nmi_out:
-	popq_cfi %rdx
-	CFI_RESTORE rdx
-
-	/* No need to check faults here */
-	INTERRUPT_RETURN
-
-	CFI_RESTORE_STATE
-first_nmi:
-	/*
-	 * Because nested NMIs will use the pushed location that we
-	 * stored in rdx, we must keep that space available.
-	 * Here's what our stack frame will look like:
-	 * +-------------------------+
-	 * | original SS             |
-	 * | original Return RSP     |
-	 * | original RFLAGS         |
-	 * | original CS             |
-	 * | original RIP            |
-	 * +-------------------------+
-	 * | temp storage for rdx    |
-	 * +-------------------------+
-	 * | NMI executing variable  |
-	 * +-------------------------+
-	 * | copied SS               |
-	 * | copied Return RSP       |
-	 * | copied RFLAGS           |
-	 * | copied CS               |
-	 * | copied RIP              |
-	 * +-------------------------+
-	 * | Saved SS                |
-	 * | Saved Return RSP        |
-	 * | Saved RFLAGS            |
-	 * | Saved CS                |
-	 * | Saved RIP               |
-	 * +-------------------------+
-	 * | pt_regs                 |
-	 * +-------------------------+
-	 *
-	 * The saved stack frame is used to fix up the copied stack frame
-	 * that a nested NMI may change to make the interrupted NMI iret jump
-	 * to the repeat_nmi. The original stack frame and the temp storage
-	 * is also used by nested NMIs and can not be trusted on exit.
-	 */
-	/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
-	movq (%rsp), %rdx
-	CFI_RESTORE rdx
-
-	/* Set the NMI executing variable on the stack. */
-	pushq_cfi $1
-
-	/*
-	 * Leave room for the "copied" frame
-	 */
-	subq $(5*8), %rsp
-	CFI_ADJUST_CFA_OFFSET 5*8
-
-	/* Copy the stack frame to the Saved frame */
-	.rept 5
-	pushq_cfi 11*8(%rsp)
-	.endr
-	CFI_DEF_CFA_OFFSET 5*8
-
-	/* Everything up to here is safe from nested NMIs */
-
-	/*
-	 * If there was a nested NMI, the first NMI's iret will return
-	 * here. But NMIs are still enabled and we can take another
-	 * nested NMI. The nested NMI checks the interrupted RIP to see
-	 * if it is between repeat_nmi and end_repeat_nmi, and if so
-	 * it will just return, as we are about to repeat an NMI anyway.
-	 * This makes it safe to copy to the stack frame that a nested
-	 * NMI will update.
-	 */
-repeat_nmi:
-	/*
-	 * Update the stack variable to say we are still in NMI (the update
-	 * is benign for the non-repeat case, where 1 was pushed just above
-	 * to this very stack slot).
-	 */
-	movq $1, 10*8(%rsp)
-
-	/* Make another copy, this one may be modified by nested NMIs */
-	addq $(10*8), %rsp
-	CFI_ADJUST_CFA_OFFSET -10*8
-	.rept 5
-	pushq_cfi -6*8(%rsp)
-	.endr
-	subq $(5*8), %rsp
-	CFI_DEF_CFA_OFFSET 5*8
-end_repeat_nmi:
-
-	/*
-	 * Everything below this point can be preempted by a nested
-	 * NMI if the first NMI took an exception and reset our iret stack
-	 * so that we repeat another NMI.
-	 */
-	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
-	ALLOC_PT_GPREGS_ON_STACK
-
-	/*
-	 * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
-	 * as we should not be calling schedule in NMI context.
-	 * Even with normal interrupts enabled. An NMI should not be
-	 * setting NEED_RESCHED or anything that normal interrupts and
-	 * exceptions might do.
-	 */
-	call paranoid_entry
-	DEFAULT_FRAME 0
-
-	/*
-	 * Save off the CR2 register. If we take a page fault in the NMI then
-	 * it could corrupt the CR2 value. If the NMI preempts a page fault
-	 * handler before it was able to read the CR2 register, and then the
-	 * NMI itself takes a page fault, the page fault that was preempted
-	 * will read the information from the NMI page fault and not the
-	 * origin fault. Save it off and restore it if it changes.
-	 * Use the r12 callee-saved register.
-	 */
-	movq %cr2, %r12
-
-	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
-	movq %rsp,%rdi
-	movq $-1,%rsi
-	call do_nmi
-
-	/* Did the NMI take a page fault? Restore cr2 if it did */
-	movq %cr2, %rcx
-	cmpq %rcx, %r12
-	je 1f
-	movq %r12, %cr2
-1:
-	
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz nmi_restore
-nmi_swapgs:
-	SWAPGS_UNSAFE_STACK
-nmi_restore:
-	RESTORE_EXTRA_REGS
-	RESTORE_C_REGS
-	/* Pop the extra iret frame at once */
-	REMOVE_PT_GPREGS_FROM_STACK 6*8
-
-	/* Clear the NMI executing stack variable */
-	movq $0, 5*8(%rsp)
-	jmp irq_return
-	CFI_ENDPROC
-END(nmi)
-
-ENTRY(ignore_sysret)
-	CFI_STARTPROC
-	mov $-ENOSYS,%eax
-	sysret
-	CFI_ENDPROC
-END(ignore_sysret)
-
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 7e429c99c728..0e2d96ffd158 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -557,7 +557,7 @@ early_idt_handler_common:
 	cld
 
 	cmpl $2,(%esp)		# X86_TRAP_NMI
-	je is_nmi		# Ignore NMI
+	je .Lis_nmi		# Ignore NMI
 
 	cmpl $2,%ss:early_recursion_flag
 	je hlt_loop
@@ -610,7 +610,7 @@ ex_entry:
 	pop %ecx
 	pop %eax
 	decl %ss:early_recursion_flag
-is_nmi:
+.Lis_nmi:
 	addl $8,%esp		/* drop vector number and error code */
 	iret
 ENDPROC(early_idt_handler_common)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index df7e78057ae0..e5c27f729a38 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -346,7 +346,7 @@ early_idt_handler_common:
 	cld
 
 	cmpl $2,(%rsp)		# X86_TRAP_NMI
-	je is_nmi		# Ignore NMI
+	je .Lis_nmi		# Ignore NMI
 
 	cmpl $2,early_recursion_flag(%rip)
 	jz  1f
@@ -411,7 +411,7 @@ early_idt_handler_common:
 	popq %rcx
 	popq %rax
 	decl early_recursion_flag(%rip)
-is_nmi:
+.Lis_nmi:
 	addq $16,%rsp		# drop vector number and error code
 	INTERRUPT_RETURN
 ENDPROC(early_idt_handler_common)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 3acbff4716b0..10757d0a3fcf 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -12,6 +12,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 
+#include <asm/irqdomain.h>
 #include <asm/fixmap.h>
 #include <asm/hpet.h>
 #include <asm/time.h>
@@ -305,8 +306,6 @@ static void hpet_legacy_clockevent_register(void)
 	printk(KERN_DEBUG "hpet clockevent registered\n");
 }
 
-static int hpet_setup_msi_irq(unsigned int irq);
-
 static void hpet_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt, int timer)
 {
@@ -357,7 +356,7 @@ static void hpet_set_mode(enum clock_event_mode mode,
 			hpet_enable_legacy_int();
 		} else {
 			struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
-			hpet_setup_msi_irq(hdev->irq);
+			irq_domain_activate_irq(irq_get_irq_data(hdev->irq));
 			disable_irq(hdev->irq);
 			irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
 			enable_irq(hdev->irq);
@@ -423,6 +422,7 @@ static int hpet_legacy_next_event(unsigned long delta,
 
 static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev);
 static struct hpet_dev	*hpet_devs;
+static struct irq_domain *hpet_domain;
 
 void hpet_msi_unmask(struct irq_data *data)
 {
@@ -473,31 +473,6 @@ static int hpet_msi_next_event(unsigned long delta,
 	return hpet_next_event(delta, evt, hdev->num);
 }
 
-static int hpet_setup_msi_irq(unsigned int irq)
-{
-	if (x86_msi.setup_hpet_msi(irq, hpet_blockid)) {
-		irq_free_hwirq(irq);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int hpet_assign_irq(struct hpet_dev *dev)
-{
-	unsigned int irq = irq_alloc_hwirq(-1);
-
-	if (!irq)
-		return -EINVAL;
-
-	irq_set_handler_data(irq, dev);
-
-	if (hpet_setup_msi_irq(irq))
-		return -EINVAL;
-
-	dev->irq = irq;
-	return 0;
-}
-
 static irqreturn_t hpet_interrupt_handler(int irq, void *data)
 {
 	struct hpet_dev *dev = (struct hpet_dev *)data;
@@ -540,9 +515,6 @@ static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
 	if (!(hdev->flags & HPET_DEV_VALID))
 		return;
 
-	if (hpet_setup_msi_irq(hdev->irq))
-		return;
-
 	hdev->cpu = cpu;
 	per_cpu(cpu_hpet_dev, cpu) = hdev;
 	evt->name = hdev->name;
@@ -574,7 +546,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
 	unsigned int id;
 	unsigned int num_timers;
 	unsigned int num_timers_used = 0;
-	int i;
+	int i, irq;
 
 	if (hpet_msi_disable)
 		return;
@@ -587,6 +559,10 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
 	num_timers++; /* Value read out starts from 0 */
 	hpet_print_config();
 
+	hpet_domain = hpet_create_irq_domain(hpet_blockid);
+	if (!hpet_domain)
+		return;
+
 	hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
 	if (!hpet_devs)
 		return;
@@ -604,12 +580,14 @@ static void hpet_msi_capability_lookup(unsigned int start_timer)
 		hdev->flags = 0;
 		if (cfg & HPET_TN_PERIODIC_CAP)
 			hdev->flags |= HPET_DEV_PERI_CAP;
+		sprintf(hdev->name, "hpet%d", i);
 		hdev->num = i;
 
-		sprintf(hdev->name, "hpet%d", i);
-		if (hpet_assign_irq(hdev))
+		irq = hpet_assign_irq(hpet_domain, hdev, hdev->num);
+		if (irq <= 0)
 			continue;
 
+		hdev->irq = irq;
 		hdev->flags |= HPET_DEV_FSB_CAP;
 		hdev->flags |= HPET_DEV_VALID;
 		num_timers_used++;
@@ -709,10 +687,6 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
 }
 #else
 
-static int hpet_setup_msi_irq(unsigned int irq)
-{
-	return 0;
-}
 static void hpet_msi_capability_lookup(unsigned int start_timer)
 {
 	return;
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index e7cc5370cd2f..16cb827a5b27 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -329,8 +329,8 @@ static void init_8259A(int auto_eoi)
 	 */
 	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
 
-	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
-	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
+	/* ICW2: 8259A-1 IR0-7 mapped to ISA_IRQ_VECTOR(0) */
+	outb_pic(ISA_IRQ_VECTOR(0), PIC_MASTER_IMR);
 
 	/* 8259A-1 (the master) has a slave on IR2 */
 	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);
@@ -342,8 +342,8 @@ static void init_8259A(int auto_eoi)
 
 	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
 
-	/* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
-	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
+	/* ICW2: 8259A-2 IR0-7 mapped to ISA_IRQ_VECTOR(8) */
+	outb_pic(ISA_IRQ_VECTOR(8), PIC_SLAVE_IMR);
 	/* 8259A-2 is a slave on master's IR2 */
 	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
 	/* (slave's support for AEOI in flat mode is to be investigated) */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index e5952c225532..88b366487b0e 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -22,6 +22,12 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace/irq_vectors.h>
 
+DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+DEFINE_PER_CPU(struct pt_regs *, irq_regs);
+EXPORT_PER_CPU_SYMBOL(irq_regs);
+
 atomic_t irq_err_count;
 
 /* Function pointer for generic interrupt vector handling */
@@ -116,6 +122,12 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
 	seq_puts(p, "  Threshold APIC interrupts\n");
 #endif
+#ifdef CONFIG_X86_MCE_AMD
+	seq_printf(p, "%*s: ", prec, "DFR");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_deferred_error_count);
+	seq_puts(p, "  Deferred Error APIC interrupts\n");
+#endif
 #ifdef CONFIG_X86_MCE
 	seq_printf(p, "%*s: ", prec, "MCE");
 	for_each_online_cpu(j)
@@ -136,6 +148,18 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 #if defined(CONFIG_X86_IO_APIC)
 	seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count));
 #endif
+#ifdef CONFIG_HAVE_KVM
+	seq_printf(p, "%*s: ", prec, "PIN");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->kvm_posted_intr_ipis);
+	seq_puts(p, "  Posted-interrupt notification event\n");
+
+	seq_printf(p, "%*s: ", prec, "PIW");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ",
+			   irq_stats(j)->kvm_posted_intr_wakeup_ipis);
+	seq_puts(p, "  Posted-interrupt wakeup event\n");
+#endif
 	return 0;
 }
 
@@ -192,8 +216,7 @@ __visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 	unsigned vector = ~regs->orig_ax;
 	unsigned irq;
 
-	irq_enter();
-	exit_idle();
+	entering_irq();
 
 	irq = __this_cpu_read(vector_irq[vector]);
 
@@ -209,7 +232,7 @@ __visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 		}
 	}
 
-	irq_exit();
+	exiting_irq();
 
 	set_irq_regs(old_regs);
 	return 1;
@@ -237,6 +260,18 @@ __visible void smp_x86_platform_ipi(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_HAVE_KVM
+static void dummy_handler(void) {}
+static void (*kvm_posted_intr_wakeup_handler)(void) = dummy_handler;
+
+void kvm_set_posted_intr_wakeup_handler(void (*handler)(void))
+{
+	if (handler)
+		kvm_posted_intr_wakeup_handler = handler;
+	else
+		kvm_posted_intr_wakeup_handler = dummy_handler;
+}
+EXPORT_SYMBOL_GPL(kvm_set_posted_intr_wakeup_handler);
+
 /*
  * Handler for POSTED_INTERRUPT_VECTOR.
  */
@@ -244,16 +279,23 @@ __visible void smp_kvm_posted_intr_ipi(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	ack_APIC_irq();
-
-	irq_enter();
-
-	exit_idle();
-
+	entering_ack_irq();
 	inc_irq_stat(kvm_posted_intr_ipis);
+	exiting_irq();
+	set_irq_regs(old_regs);
+}
 
-	irq_exit();
+/*
+ * Handler for POSTED_INTERRUPT_WAKEUP_VECTOR.
+ */
+__visible void smp_kvm_posted_intr_wakeup_ipi(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
 
+	entering_ack_irq();
+	inc_irq_stat(kvm_posted_intr_wakeup_ipis);
+	kvm_posted_intr_wakeup_handler();
+	exiting_irq();
 	set_irq_regs(old_regs);
 }
 #endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index f9fd86a7fcc7..cd74f5978ab9 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -21,12 +21,6 @@
 
 #include <asm/apic.h>
 
-DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
-EXPORT_PER_CPU_SYMBOL(irq_stat);
-
-DEFINE_PER_CPU(struct pt_regs *, irq_regs);
-EXPORT_PER_CPU_SYMBOL(irq_regs);
-
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 
 int sysctl_panic_on_stackoverflow __read_mostly;
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 394e643d7830..bc4604e500a3 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -20,12 +20,6 @@
 #include <asm/idle.h>
 #include <asm/apic.h>
 
-DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
-EXPORT_PER_CPU_SYMBOL(irq_stat);
-
-DEFINE_PER_CPU(struct pt_regs *, irq_regs);
-EXPORT_PER_CPU_SYMBOL(irq_regs);
-
 int sysctl_panic_on_stackoverflow;
 
 /*
diff --git a/arch/x86/kernel/irq_work.c b/arch/x86/kernel/irq_work.c
index 15d741ddfeeb..dc5fa6a1e8d6 100644
--- a/arch/x86/kernel/irq_work.c
+++ b/arch/x86/kernel/irq_work.c
@@ -10,12 +10,6 @@
 #include <asm/apic.h>
 #include <asm/trace/irq_vectors.h>
 
-static inline void irq_work_entering_irq(void)
-{
-	irq_enter();
-	ack_APIC_irq();
-}
-
 static inline void __smp_irq_work_interrupt(void)
 {
 	inc_irq_stat(apic_irq_work_irqs);
@@ -24,14 +18,14 @@ static inline void __smp_irq_work_interrupt(void)
 
 __visible void smp_irq_work_interrupt(struct pt_regs *regs)
 {
-	irq_work_entering_irq();
+	ipi_entering_ack_irq();
 	__smp_irq_work_interrupt();
 	exiting_irq();
 }
 
 __visible void smp_trace_irq_work_interrupt(struct pt_regs *regs)
 {
-	irq_work_entering_irq();
+	ipi_entering_ack_irq();
 	trace_irq_work_entry(IRQ_WORK_VECTOR);
 	__smp_irq_work_interrupt();
 	trace_irq_work_exit(IRQ_WORK_VECTOR);
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index cd10a6437264..a3a5e158ed69 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -86,7 +86,7 @@ void __init init_IRQ(void)
 	int i;
 
 	/*
-	 * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
+	 * On cpu 0, Assign ISA_IRQ_VECTOR(irq) to IRQ 0..15.
 	 * If these IRQ's are handled by legacy interrupt-controllers like PIC,
 	 * then this configuration will likely be static after the boot. If
 	 * these IRQ's are handled by more mordern controllers like IO-APIC,
@@ -94,7 +94,7 @@ void __init init_IRQ(void)
 	 * irq's migrate etc.
 	 */
 	for (i = 0; i < nr_legacy_irqs(); i++)
-		per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
+		per_cpu(vector_irq, 0)[ISA_IRQ_VECTOR(i)] = i;
 
 	x86_init.irqs.intr_init();
 }
@@ -135,6 +135,10 @@ static void __init apic_intr_init(void)
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
 
+#ifdef CONFIG_X86_MCE_AMD
+	alloc_intr_gate(DEFERRED_ERROR_VECTOR, deferred_error_interrupt);
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* self generated IPI for local APIC timer */
 	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
@@ -144,6 +148,8 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_HAVE_KVM
 	/* IPI for KVM to deliver posted interrupt */
 	alloc_intr_gate(POSTED_INTR_VECTOR, kvm_posted_intr_ipi);
+	/* IPI for KVM to deliver interrupt to wake up tasks */
+	alloc_intr_gate(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi);
 #endif
 
 	/* IPI vectors for APIC spurious and error interrupts */
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 415480d3ea84..11546b462fa6 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -17,6 +17,7 @@
 #include <linux/ftrace.h>
 #include <linux/io.h>
 #include <linux/suspend.h>
+#include <linux/vmalloc.h>
 
 #include <asm/init.h>
 #include <asm/pgtable.h>
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 2d2a237f2c73..30ca7607cbbb 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -19,8 +19,8 @@
 #include <linux/module.h>
 #include <linux/smp.h>
 #include <linux/pci.h>
-#include <linux/irqdomain.h>
 
+#include <asm/irqdomain.h>
 #include <asm/mtrr.h>
 #include <asm/mpspec.h>
 #include <asm/pgalloc.h>
@@ -113,11 +113,6 @@ static void __init MP_bus_info(struct mpc_bus *m)
 		pr_warn("Unknown bustype %s - ignoring\n", str);
 }
 
-static struct irq_domain_ops mp_ioapic_irqdomain_ops = {
-	.map = mp_irqdomain_map,
-	.unmap = mp_irqdomain_unmap,
-};
-
 static void __init MP_ioapic_info(struct mpc_ioapic *m)
 {
 	struct ioapic_domain_cfg cfg = {
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index c614dd492f5f..58bcfb67c01f 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -154,7 +154,9 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 		ret = paravirt_patch_ident_64(insnbuf, len);
 
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
+#ifdef CONFIG_X86_32
 		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
+#endif
 		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
 		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret64))
 		/* If operation requires a jmp, then jmp */
@@ -371,7 +373,7 @@ __visible struct pv_cpu_ops pv_cpu_ops = {
 
 	.load_sp0 = native_load_sp0,
 
-#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
+#if defined(CONFIG_X86_32)
 	.irq_enable_sysexit = native_irq_enable_sysexit,
 #endif
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index a1fa86782186..8aa05583bc42 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -55,7 +55,6 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, save_fl);
 		PATCH_SITE(pv_irq_ops, irq_enable);
 		PATCH_SITE(pv_irq_ops, irq_disable);
-		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
 		PATCH_SITE(pv_cpu_ops, usergs_sysret32);
 		PATCH_SITE(pv_cpu_ops, usergs_sysret64);
 		PATCH_SITE(pv_cpu_ops, swapgs);
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index deff651835b4..c09c99ccf3e3 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -303,13 +303,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	arch_end_context_switch(next_p);
 
 	/*
-	 * Reload esp0, kernel_stack, and current_top_of_stack.  This changes
+	 * Reload esp0 and cpu_current_top_of_stack.  This changes
 	 * current_thread_info().
 	 */
 	load_sp0(tss, next);
-	this_cpu_write(kernel_stack,
-		       (unsigned long)task_stack_page(next_p) +
-		       THREAD_SIZE);
 	this_cpu_write(cpu_current_top_of_stack,
 		       (unsigned long)task_stack_page(next_p) +
 		       THREAD_SIZE);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index c50e013b57d2..843f92e4c711 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -410,9 +410,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/* Reload esp0 and ss1.  This changes current_thread_info(). */
 	load_sp0(tss, next);
 
-	this_cpu_write(kernel_stack,
-		(unsigned long)task_stack_page(next_p) + THREAD_SIZE);
-
 	/*
 	 * Now maybe reload the debug registers and handle I/O bitmaps
 	 */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index cba828892790..265a6fdea8b7 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1224,8 +1224,7 @@ void __init setup_arch(char **cmdline_p)
 	init_cpu_to_node();
 
 	init_apic_mappings();
-	if (x86_io_apic_ops.init)
-		x86_io_apic_ops.init();
+	io_apic_init_mappings();
 
 	kvm_guest_init();
 
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index be8e1bde07aa..15aaa69bbb5e 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -170,8 +170,7 @@ static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs)
 
 asmlinkage __visible void smp_reboot_interrupt(void)
 {
-	ack_APIC_irq();
-	irq_enter();
+	ipi_entering_ack_irq();
 	stop_this_cpu(NULL);
 	irq_exit();
 }
@@ -265,12 +264,6 @@ __visible void smp_reschedule_interrupt(struct pt_regs *regs)
 	 */
 }
 
-static inline void smp_entering_irq(void)
-{
-	ack_APIC_irq();
-	irq_enter();
-}
-
 __visible void smp_trace_reschedule_interrupt(struct pt_regs *regs)
 {
 	/*
@@ -279,7 +272,7 @@ __visible void smp_trace_reschedule_interrupt(struct pt_regs *regs)
 	 * scheduler_ipi(). This is OK, since those functions are allowed
 	 * to nest.
 	 */
-	smp_entering_irq();
+	ipi_entering_ack_irq();
 	trace_reschedule_entry(RESCHEDULE_VECTOR);
 	__smp_reschedule_interrupt();
 	trace_reschedule_exit(RESCHEDULE_VECTOR);
@@ -297,14 +290,14 @@ static inline void __smp_call_function_interrupt(void)
 
 __visible void smp_call_function_interrupt(struct pt_regs *regs)
 {
-	smp_entering_irq();
+	ipi_entering_ack_irq();
 	__smp_call_function_interrupt();
 	exiting_irq();
 }
 
 __visible void smp_trace_call_function_interrupt(struct pt_regs *regs)
 {
-	smp_entering_irq();
+	ipi_entering_ack_irq();
 	trace_call_function_entry(CALL_FUNCTION_VECTOR);
 	__smp_call_function_interrupt();
 	trace_call_function_exit(CALL_FUNCTION_VECTOR);
@@ -319,14 +312,14 @@ static inline void __smp_call_function_single_interrupt(void)
 
 __visible void smp_call_function_single_interrupt(struct pt_regs *regs)
 {
-	smp_entering_irq();
+	ipi_entering_ack_irq();
 	__smp_call_function_single_interrupt();
 	exiting_irq();
 }
 
 __visible void smp_trace_call_function_single_interrupt(struct pt_regs *regs)
 {
-	smp_entering_irq();
+	ipi_entering_ack_irq();
 	trace_call_function_single_entry(CALL_FUNCTION_SINGLE_VECTOR);
 	__smp_call_function_single_interrupt();
 	trace_call_function_single_exit(CALL_FUNCTION_SINGLE_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6d4bfea25874..8add66b22f33 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -515,6 +515,40 @@ void __inquire_remote_apic(int apicid)
 }
 
 /*
+ * The Multiprocessor Specification 1.4 (1997) example code suggests
+ * that there should be a 10ms delay between the BSP asserting INIT
+ * and de-asserting INIT, when starting a remote processor.
+ * But that slows boot and resume on modern processors, which include
+ * many cores and don't require that delay.
+ *
+ * Cmdline "init_cpu_udelay=" is available to over-ride this delay.
+ * Modern processor families are quirked to remove the delay entirely.
+ */
+#define UDELAY_10MS_DEFAULT 10000
+
+static unsigned int init_udelay = UDELAY_10MS_DEFAULT;
+
+static int __init cpu_init_udelay(char *str)
+{
+	get_option(&str, &init_udelay);
+
+	return 0;
+}
+early_param("cpu_init_udelay", cpu_init_udelay);
+
+static void __init smp_quirk_init_udelay(void)
+{
+	/* if cmdline changed it from default, leave it alone */
+	if (init_udelay != UDELAY_10MS_DEFAULT)
+		return;
+
+	/* if modern processor, use no delay */
+	if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) ||
+	    ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF)))
+		init_udelay = 0;
+}
+
+/*
  * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
  * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
  * won't ... remember to clear down the APIC, etc later.
@@ -556,7 +590,7 @@ wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip)
 static int
 wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 {
-	unsigned long send_status, accept_status = 0;
+	unsigned long send_status = 0, accept_status = 0;
 	int maxlvt, num_starts, j;
 
 	maxlvt = lapic_get_maxlvt();
@@ -584,7 +618,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
-	mdelay(10);
+	udelay(init_udelay);
 
 	pr_debug("Deasserting INIT\n");
 
@@ -652,6 +686,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(200);
+
 		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
 		accept_status = (apic_read(APIC_ESR) & 0xEF);
@@ -793,8 +828,6 @@ void common_cpu_up(unsigned int cpu, struct task_struct *idle)
 	clear_tsk_thread_flag(idle, TIF_FORK);
 	initial_gs = per_cpu_offset(cpu);
 #endif
-	per_cpu(kernel_stack, cpu) =
-		(unsigned long)task_stack_page(idle) + THREAD_SIZE;
 }
 
 /*
@@ -1177,6 +1210,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 		uv_system_init();
 
 	set_mtrr_aps_delayed_init();
+
+	smp_quirk_init_udelay();
 }
 
 void arch_enable_nonboot_cpus_begin(void)
diff --git a/arch/x86/kernel/syscall_32.c b/arch/x86/kernel/syscall_32.c
deleted file mode 100644
index 3777189c4a19..000000000000
--- a/arch/x86/kernel/syscall_32.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* System call table for i386. */
-
-#include <linux/linkage.h>
-#include <linux/sys.h>
-#include <linux/cache.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_IA32_EMULATION
-#define SYM(sym, compat) compat
-#else
-#define SYM(sym, compat) sym
-#define ia32_sys_call_table sys_call_table
-#define __NR_ia32_syscall_max __NR_syscall_max
-#endif
-
-#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage void SYM(sym, compat)(void) ;
-#include <asm/syscalls_32.h>
-#undef __SYSCALL_I386
-
-#define __SYSCALL_I386(nr, sym, compat) [nr] = SYM(sym, compat),
-
-typedef asmlinkage void (*sys_call_ptr_t)(void);
-
-extern asmlinkage void sys_ni_syscall(void);
-
-__visible const sys_call_ptr_t ia32_sys_call_table[__NR_ia32_syscall_max+1] = {
-	/*
-	 * Smells like a compiler bug -- it doesn't work
-	 * when the & below is removed.
-	 */
-	[0 ... __NR_ia32_syscall_max] = &sys_ni_syscall,
-#include <asm/syscalls_32.h>
-};
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
deleted file mode 100644
index 4ac730b37f0b..000000000000
--- a/arch/x86/kernel/syscall_64.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* System call table for x86-64. */
-
-#include <linux/linkage.h>
-#include <linux/sys.h>
-#include <linux/cache.h>
-#include <asm/asm-offsets.h>
-#include <asm/syscall.h>
-
-#define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
-
-#ifdef CONFIG_X86_X32_ABI
-# define __SYSCALL_X32(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
-#else
-# define __SYSCALL_X32(nr, sym, compat) /* nothing */
-#endif
-
-#define __SYSCALL_64(nr, sym, compat) extern asmlinkage void sym(void) ;
-#include <asm/syscalls_64.h>
-#undef __SYSCALL_64
-
-#define __SYSCALL_64(nr, sym, compat) [nr] = sym,
-
-extern void sys_ni_syscall(void);
-
-asmlinkage const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
-	/*
-	 * Smells like a compiler bug -- it doesn't work
-	 * when the & below is removed.
-	 */
-	[0 ... __NR_syscall_max] = &sys_ni_syscall,
-#include <asm/syscalls_64.h>
-};
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 36cb15b7b367..f5791927aa64 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -73,8 +73,7 @@ gate_desc debug_idt_table[NR_VECTORS] __page_aligned_bss;
 #else
 #include <asm/processor-flags.h>
 #include <asm/setup.h>
-
-asmlinkage int system_call(void);
+#include <asm/proto.h>
 #endif
 
 /* Must be page-aligned because the real IDT is used in a fixmap. */
@@ -769,18 +768,6 @@ dotraplinkage void
 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 {
 	conditional_sti(regs);
-#if 0
-	/* No need to warn about this any longer. */
-	pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
-#endif
-}
-
-asmlinkage __visible void __attribute__((weak)) smp_thermal_interrupt(void)
-{
-}
-
-asmlinkage __visible void __attribute__((weak)) smp_threshold_interrupt(void)
-{
 }
 
 dotraplinkage void
@@ -906,13 +893,13 @@ void __init trap_init(void)
 		set_bit(i, used_vectors);
 
 #ifdef CONFIG_IA32_EMULATION
-	set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
+	set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_compat);
 	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
 #ifdef CONFIG_X86_32
-	set_system_trap_gate(SYSCALL_VECTOR, &system_call);
-	set_bit(SYSCALL_VECTOR, used_vectors);
+	set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
+	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
deleted file mode 100644
index 2dcc6ff6fdcc..000000000000
--- a/arch/x86/kernel/vsyscall_64.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Copyright (c) 2012-2014 Andy Lutomirski <luto@amacapital.net>
- *
- * Based on the original implementation which is:
- *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
- *  Copyright 2003 Andi Kleen, SuSE Labs.
- *
- *  Parts of the original code have been moved to arch/x86/vdso/vma.c
- *
- * This file implements vsyscall emulation.  vsyscalls are a legacy ABI:
- * Userspace can request certain kernel services by calling fixed
- * addresses.  This concept is problematic:
- *
- * - It interferes with ASLR.
- * - It's awkward to write code that lives in kernel addresses but is
- *   callable by userspace at fixed addresses.
- * - The whole concept is impossible for 32-bit compat userspace.
- * - UML cannot easily virtualize a vsyscall.
- *
- * As of mid-2014, I believe that there is no new userspace code that
- * will use a vsyscall if the vDSO is present.  I hope that there will
- * soon be no new userspace code that will ever use a vsyscall.
- *
- * The code in this file emulates vsyscalls when notified of a page
- * fault to a vsyscall address.
- */
-
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/syscalls.h>
-#include <linux/ratelimit.h>
-
-#include <asm/vsyscall.h>
-#include <asm/unistd.h>
-#include <asm/fixmap.h>
-#include <asm/traps.h>
-
-#define CREATE_TRACE_POINTS
-#include "vsyscall_trace.h"
-
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
-
-static int __init vsyscall_setup(char *str)
-{
-	if (str) {
-		if (!strcmp("emulate", str))
-			vsyscall_mode = EMULATE;
-		else if (!strcmp("native", str))
-			vsyscall_mode = NATIVE;
-		else if (!strcmp("none", str))
-			vsyscall_mode = NONE;
-		else
-			return -EINVAL;
-
-		return 0;
-	}
-
-	return -EINVAL;
-}
-early_param("vsyscall", vsyscall_setup);
-
-static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
-			      const char *message)
-{
-	if (!show_unhandled_signals)
-		return;
-
-	printk_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
-			   level, current->comm, task_pid_nr(current),
-			   message, regs->ip, regs->cs,
-			   regs->sp, regs->ax, regs->si, regs->di);
-}
-
-static int addr_to_vsyscall_nr(unsigned long addr)
-{
-	int nr;
-
-	if ((addr & ~0xC00UL) != VSYSCALL_ADDR)
-		return -EINVAL;
-
-	nr = (addr & 0xC00UL) >> 10;
-	if (nr >= 3)
-		return -EINVAL;
-
-	return nr;
-}
-
-static bool write_ok_or_segv(unsigned long ptr, size_t size)
-{
-	/*
-	 * XXX: if access_ok, get_user, and put_user handled
-	 * sig_on_uaccess_error, this could go away.
-	 */
-
-	if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) {
-		siginfo_t info;
-		struct thread_struct *thread = &current->thread;
-
-		thread->error_code	= 6;  /* user fault, no page, write */
-		thread->cr2		= ptr;
-		thread->trap_nr		= X86_TRAP_PF;
-
-		memset(&info, 0, sizeof(info));
-		info.si_signo		= SIGSEGV;
-		info.si_errno		= 0;
-		info.si_code		= SEGV_MAPERR;
-		info.si_addr		= (void __user *)ptr;
-
-		force_sig_info(SIGSEGV, &info, current);
-		return false;
-	} else {
-		return true;
-	}
-}
-
-bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
-{
-	struct task_struct *tsk;
-	unsigned long caller;
-	int vsyscall_nr, syscall_nr, tmp;
-	int prev_sig_on_uaccess_error;
-	long ret;
-
-	/*
-	 * No point in checking CS -- the only way to get here is a user mode
-	 * trap to a high address, which means that we're in 64-bit user code.
-	 */
-
-	WARN_ON_ONCE(address != regs->ip);
-
-	if (vsyscall_mode == NONE) {
-		warn_bad_vsyscall(KERN_INFO, regs,
-				  "vsyscall attempted with vsyscall=none");
-		return false;
-	}
-
-	vsyscall_nr = addr_to_vsyscall_nr(address);
-
-	trace_emulate_vsyscall(vsyscall_nr);
-
-	if (vsyscall_nr < 0) {
-		warn_bad_vsyscall(KERN_WARNING, regs,
-				  "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround");
-		goto sigsegv;
-	}
-
-	if (get_user(caller, (unsigned long __user *)regs->sp) != 0) {
-		warn_bad_vsyscall(KERN_WARNING, regs,
-				  "vsyscall with bad stack (exploit attempt?)");
-		goto sigsegv;
-	}
-
-	tsk = current;
-
-	/*
-	 * Check for access_ok violations and find the syscall nr.
-	 *
-	 * NULL is a valid user pointer (in the access_ok sense) on 32-bit and
-	 * 64-bit, so we don't need to special-case it here.  For all the
-	 * vsyscalls, NULL means "don't write anything" not "write it at
-	 * address 0".
-	 */
-	switch (vsyscall_nr) {
-	case 0:
-		if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
-		    !write_ok_or_segv(regs->si, sizeof(struct timezone))) {
-			ret = -EFAULT;
-			goto check_fault;
-		}
-
-		syscall_nr = __NR_gettimeofday;
-		break;
-
-	case 1:
-		if (!write_ok_or_segv(regs->di, sizeof(time_t))) {
-			ret = -EFAULT;
-			goto check_fault;
-		}
-
-		syscall_nr = __NR_time;
-		break;
-
-	case 2:
-		if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
-		    !write_ok_or_segv(regs->si, sizeof(unsigned))) {
-			ret = -EFAULT;
-			goto check_fault;
-		}
-
-		syscall_nr = __NR_getcpu;
-		break;
-	}
-
-	/*
-	 * Handle seccomp.  regs->ip must be the original value.
-	 * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt.
-	 *
-	 * We could optimize the seccomp disabled case, but performance
-	 * here doesn't matter.
-	 */
-	regs->orig_ax = syscall_nr;
-	regs->ax = -ENOSYS;
-	tmp = secure_computing();
-	if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) {
-		warn_bad_vsyscall(KERN_DEBUG, regs,
-				  "seccomp tried to change syscall nr or ip");
-		do_exit(SIGSYS);
-	}
-	regs->orig_ax = -1;
-	if (tmp)
-		goto do_ret;  /* skip requested */
-
-	/*
-	 * With a real vsyscall, page faults cause SIGSEGV.  We want to
-	 * preserve that behavior to make writing exploits harder.
-	 */
-	prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error;
-	current_thread_info()->sig_on_uaccess_error = 1;
-
-	ret = -EFAULT;
-	switch (vsyscall_nr) {
-	case 0:
-		ret = sys_gettimeofday(
-			(struct timeval __user *)regs->di,
-			(struct timezone __user *)regs->si);
-		break;
-
-	case 1:
-		ret = sys_time((time_t __user *)regs->di);
-		break;
-
-	case 2:
-		ret = sys_getcpu((unsigned __user *)regs->di,
-				 (unsigned __user *)regs->si,
-				 NULL);
-		break;
-	}
-
-	current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
-
-check_fault:
-	if (ret == -EFAULT) {
-		/* Bad news -- userspace fed a bad pointer to a vsyscall. */
-		warn_bad_vsyscall(KERN_INFO, regs,
-				  "vsyscall fault (exploit attempt?)");
-
-		/*
-		 * If we failed to generate a signal for any reason,
-		 * generate one here.  (This should be impossible.)
-		 */
-		if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) &&
-				 !sigismember(&tsk->pending.signal, SIGSEGV)))
-			goto sigsegv;
-
-		return true;  /* Don't emulate the ret. */
-	}
-
-	regs->ax = ret;
-
-do_ret:
-	/* Emulate a ret instruction. */
-	regs->ip = caller;
-	regs->sp += 8;
-	return true;
-
-sigsegv:
-	force_sig(SIGSEGV, current);
-	return true;
-}
-
-/*
- * A pseudo VMA to allow ptrace access for the vsyscall page.  This only
- * covers the 64bit vsyscall page now. 32bit has a real VMA now and does
- * not need special handling anymore:
- */
-static const char *gate_vma_name(struct vm_area_struct *vma)
-{
-	return "[vsyscall]";
-}
-static struct vm_operations_struct gate_vma_ops = {
-	.name = gate_vma_name,
-};
-static struct vm_area_struct gate_vma = {
-	.vm_start	= VSYSCALL_ADDR,
-	.vm_end		= VSYSCALL_ADDR + PAGE_SIZE,
-	.vm_page_prot	= PAGE_READONLY_EXEC,
-	.vm_flags	= VM_READ | VM_EXEC,
-	.vm_ops		= &gate_vma_ops,
-};
-
-struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
-{
-#ifdef CONFIG_IA32_EMULATION
-	if (!mm || mm->context.ia32_compat)
-		return NULL;
-#endif
-	if (vsyscall_mode == NONE)
-		return NULL;
-	return &gate_vma;
-}
-
-int in_gate_area(struct mm_struct *mm, unsigned long addr)
-{
-	struct vm_area_struct *vma = get_gate_vma(mm);
-
-	if (!vma)
-		return 0;
-
-	return (addr >= vma->vm_start) && (addr < vma->vm_end);
-}
-
-/*
- * Use this when you have no reliable mm, typically from interrupt
- * context. It is less reliable than using a task's mm and may give
- * false positives.
- */
-int in_gate_area_no_mm(unsigned long addr)
-{
-	return vsyscall_mode != NONE && (addr & PAGE_MASK) == VSYSCALL_ADDR;
-}
-
-void __init map_vsyscall(void)
-{
-	extern char __vsyscall_page;
-	unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page);
-
-	if (vsyscall_mode != NONE)
-		__set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall,
-			     vsyscall_mode == NATIVE
-			     ? PAGE_KERNEL_VSYSCALL
-			     : PAGE_KERNEL_VVAR);
-
-	BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_PAGE) !=
-		     (unsigned long)VSYSCALL_ADDR);
-}
diff --git a/arch/x86/kernel/vsyscall_emu_64.S b/arch/x86/kernel/vsyscall_emu_64.S
deleted file mode 100644
index c9596a9af159..000000000000
--- a/arch/x86/kernel/vsyscall_emu_64.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * vsyscall_emu_64.S: Vsyscall emulation page
- *
- * Copyright (c) 2011 Andy Lutomirski
- *
- * Subject to the GNU General Public License, version 2
- */
-
-#include <linux/linkage.h>
-
-#include <asm/irq_vectors.h>
-#include <asm/page_types.h>
-#include <asm/unistd_64.h>
-
-__PAGE_ALIGNED_DATA
-	.globl __vsyscall_page
-	.balign PAGE_SIZE, 0xcc
-	.type __vsyscall_page, @object
-__vsyscall_page:
-
-	mov $__NR_gettimeofday, %rax
-	syscall
-	ret
-
-	.balign 1024, 0xcc
-	mov $__NR_time, %rax
-	syscall
-	ret
-
-	.balign 1024, 0xcc
-	mov $__NR_getcpu, %rax
-	syscall
-	ret
-
-	.balign 4096, 0xcc
-
-	.size __vsyscall_page, 4096
diff --git a/arch/x86/kernel/vsyscall_gtod.c b/arch/x86/kernel/vsyscall_gtod.c
deleted file mode 100644
index 51e330416995..000000000000
--- a/arch/x86/kernel/vsyscall_gtod.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
- *  Copyright 2003 Andi Kleen, SuSE Labs.
- *
- *  Modified for x86 32 bit architecture by
- *  Stefani Seibold <stefani@seibold.net>
- *  sponsored by Rohde & Schwarz GmbH & Co. KG Munich/Germany
- *
- *  Thanks to hpa@transmeta.com for some useful hint.
- *  Special thanks to Ingo Molnar for his early experience with
- *  a different vsyscall implementation for Linux/IA32 and for the name.
- *
- */
-
-#include <linux/timekeeper_internal.h>
-#include <asm/vgtod.h>
-#include <asm/vvar.h>
-
-DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data);
-
-void update_vsyscall_tz(void)
-{
-	vsyscall_gtod_data.tz_minuteswest = sys_tz.tz_minuteswest;
-	vsyscall_gtod_data.tz_dsttime = sys_tz.tz_dsttime;
-}
-
-void update_vsyscall(struct timekeeper *tk)
-{
-	struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data;
-
-	gtod_write_begin(vdata);
-
-	/* copy vsyscall data */
-	vdata->vclock_mode	= tk->tkr_mono.clock->archdata.vclock_mode;
-	vdata->cycle_last	= tk->tkr_mono.cycle_last;
-	vdata->mask		= tk->tkr_mono.mask;
-	vdata->mult		= tk->tkr_mono.mult;
-	vdata->shift		= tk->tkr_mono.shift;
-
-	vdata->wall_time_sec		= tk->xtime_sec;
-	vdata->wall_time_snsec		= tk->tkr_mono.xtime_nsec;
-
-	vdata->monotonic_time_sec	= tk->xtime_sec
-					+ tk->wall_to_monotonic.tv_sec;
-	vdata->monotonic_time_snsec	= tk->tkr_mono.xtime_nsec
-					+ ((u64)tk->wall_to_monotonic.tv_nsec
-						<< tk->tkr_mono.shift);
-	while (vdata->monotonic_time_snsec >=
-					(((u64)NSEC_PER_SEC) << tk->tkr_mono.shift)) {
-		vdata->monotonic_time_snsec -=
-					((u64)NSEC_PER_SEC) << tk->tkr_mono.shift;
-		vdata->monotonic_time_sec++;
-	}
-
-	vdata->wall_time_coarse_sec	= tk->xtime_sec;
-	vdata->wall_time_coarse_nsec	= (long)(tk->tkr_mono.xtime_nsec >>
-						 tk->tkr_mono.shift);
-
-	vdata->monotonic_time_coarse_sec =
-		vdata->wall_time_coarse_sec + tk->wall_to_monotonic.tv_sec;
-	vdata->monotonic_time_coarse_nsec =
-		vdata->wall_time_coarse_nsec + tk->wall_to_monotonic.tv_nsec;
-
-	while (vdata->monotonic_time_coarse_nsec >= NSEC_PER_SEC) {
-		vdata->monotonic_time_coarse_nsec -= NSEC_PER_SEC;
-		vdata->monotonic_time_coarse_sec++;
-	}
-
-	gtod_write_end(vdata);
-}
diff --git a/arch/x86/kernel/vsyscall_trace.h b/arch/x86/kernel/vsyscall_trace.h
deleted file mode 100644
index a8b2edec54fe..000000000000
--- a/arch/x86/kernel/vsyscall_trace.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM vsyscall
-
-#if !defined(__VSYSCALL_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
-#define __VSYSCALL_TRACE_H
-
-#include <linux/tracepoint.h>
-
-TRACE_EVENT(emulate_vsyscall,
-
-	    TP_PROTO(int nr),
-
-	    TP_ARGS(nr),
-
-	    TP_STRUCT__entry(__field(int, nr)),
-
-	    TP_fast_assign(
-			   __entry->nr = nr;
-			   ),
-
-	    TP_printk("nr = %d", __entry->nr)
-);
-
-#endif
-
-#undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../arch/x86/kernel
-#define TRACE_INCLUDE_FILE vsyscall_trace
-#include <trace/define_trace.h>
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b0722de53..3cee10abf01d 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -111,11 +111,9 @@ EXPORT_SYMBOL_GPL(x86_platform);
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
 	.setup_msi_irqs		= native_setup_msi_irqs,
-	.compose_msi_msg	= native_compose_msi_msg,
 	.teardown_msi_irq	= native_teardown_msi_irq,
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
-	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
 /* MSI arch specific hooks */
@@ -141,13 +139,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
-	.init			= native_io_apic_init_mappings,
 	.read			= native_io_apic_read,
-	.write			= native_io_apic_write,
-	.modify			= native_io_apic_modify,
 	.disable		= native_disable_io_apic,
-	.print_entries		= native_io_apic_print_entries,
-	.set_affinity		= native_ioapic_set_affinity,
-	.setup_entry		= native_setup_ioapic_entry,
-	.eoi_ioapic_pin		= native_eoi_ioapic_pin,
 };