Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

16 files changed, 230 insertions, 334 deletions

diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S
index f5cc9eb1d51b..082a85167a5b 100644
--- a/arch/x86/lib/atomic64_cx8_32.S
+++ b/arch/x86/lib/atomic64_cx8_32.S
@@ -13,16 +13,6 @@
 #include <asm/alternative-asm.h>
 #include <asm/dwarf2.h>
 
-.macro SAVE reg
-	pushl_cfi %\reg
-	CFI_REL_OFFSET \reg, 0
-.endm
-
-.macro RESTORE reg
-	popl_cfi %\reg
-	CFI_RESTORE \reg
-.endm
-
 .macro read64 reg
 	movl %ebx, %eax
 	movl %ecx, %edx
@@ -67,10 +57,10 @@ ENDPROC(atomic64_xchg_cx8)
 .macro addsub_return func ins insc
 ENTRY(atomic64_\func\()_return_cx8)
 	CFI_STARTPROC
-	SAVE ebp
-	SAVE ebx
-	SAVE esi
-	SAVE edi
+	pushl_cfi_reg ebp
+	pushl_cfi_reg ebx
+	pushl_cfi_reg esi
+	pushl_cfi_reg edi
 
 	movl %eax, %esi
 	movl %edx, %edi
@@ -89,10 +79,10 @@ ENTRY(atomic64_\func\()_return_cx8)
 10:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	RESTORE edi
-	RESTORE esi
-	RESTORE ebx
-	RESTORE ebp
+	popl_cfi_reg edi
+	popl_cfi_reg esi
+	popl_cfi_reg ebx
+	popl_cfi_reg ebp
 	ret
 	CFI_ENDPROC
 ENDPROC(atomic64_\func\()_return_cx8)
@@ -104,7 +94,7 @@ addsub_return sub sub sbb
 .macro incdec_return func ins insc
 ENTRY(atomic64_\func\()_return_cx8)
 	CFI_STARTPROC
-	SAVE ebx
+	pushl_cfi_reg ebx
 
 	read64 %esi
 1:
@@ -119,7 +109,7 @@ ENTRY(atomic64_\func\()_return_cx8)
 10:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	RESTORE ebx
+	popl_cfi_reg ebx
 	ret
 	CFI_ENDPROC
 ENDPROC(atomic64_\func\()_return_cx8)
@@ -130,7 +120,7 @@ incdec_return dec sub sbb
 
 ENTRY(atomic64_dec_if_positive_cx8)
 	CFI_STARTPROC
-	SAVE ebx
+	pushl_cfi_reg ebx
 
 	read64 %esi
 1:
@@ -146,18 +136,18 @@ ENTRY(atomic64_dec_if_positive_cx8)
 2:
 	movl %ebx, %eax
 	movl %ecx, %edx
-	RESTORE ebx
+	popl_cfi_reg ebx
 	ret
 	CFI_ENDPROC
 ENDPROC(atomic64_dec_if_positive_cx8)
 
 ENTRY(atomic64_add_unless_cx8)
 	CFI_STARTPROC
-	SAVE ebp
-	SAVE ebx
+	pushl_cfi_reg ebp
+	pushl_cfi_reg ebx
 /* these just push these two parameters on the stack */
-	SAVE edi
-	SAVE ecx
+	pushl_cfi_reg edi
+	pushl_cfi_reg ecx
 
 	movl %eax, %ebp
 	movl %edx, %edi
@@ -179,8 +169,8 @@ ENTRY(atomic64_add_unless_cx8)
 3:
 	addl $8, %esp
 	CFI_ADJUST_CFA_OFFSET -8
-	RESTORE ebx
-	RESTORE ebp
+	popl_cfi_reg ebx
+	popl_cfi_reg ebp
 	ret
 4:
 	cmpl %edx, 4(%esp)
@@ -192,7 +182,7 @@ ENDPROC(atomic64_add_unless_cx8)
 
 ENTRY(atomic64_inc_not_zero_cx8)
 	CFI_STARTPROC
-	SAVE ebx
+	pushl_cfi_reg ebx
 
 	read64 %esi
 1:
@@ -209,7 +199,7 @@ ENTRY(atomic64_inc_not_zero_cx8)
 
 	movl $1, %eax
 3:
-	RESTORE ebx
+	popl_cfi_reg ebx
 	ret
 	CFI_ENDPROC
 ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/x86/lib/checksum_32.S b/arch/x86/lib/checksum_32.S
index e78b8eee6615..9bc944a91274 100644
--- a/arch/x86/lib/checksum_32.S
+++ b/arch/x86/lib/checksum_32.S
@@ -51,10 +51,8 @@ unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
 	   */		
 ENTRY(csum_partial)
 	CFI_STARTPROC
-	pushl_cfi %esi
-	CFI_REL_OFFSET esi, 0
-	pushl_cfi %ebx
-	CFI_REL_OFFSET ebx, 0
+	pushl_cfi_reg esi
+	pushl_cfi_reg ebx
 	movl 20(%esp),%eax	# Function arg: unsigned int sum
 	movl 16(%esp),%ecx	# Function arg: int len
 	movl 12(%esp),%esi	# Function arg: unsigned char *buff
@@ -127,14 +125,12 @@ ENTRY(csum_partial)
 6:	addl %ecx,%eax
 	adcl $0, %eax 
 7:	
-	testl $1, 12(%esp)
+	testb $1, 12(%esp)
 	jz 8f
 	roll $8, %eax
 8:
-	popl_cfi %ebx
-	CFI_RESTORE ebx
-	popl_cfi %esi
-	CFI_RESTORE esi
+	popl_cfi_reg ebx
+	popl_cfi_reg esi
 	ret
 	CFI_ENDPROC
 ENDPROC(csum_partial)
@@ -145,10 +141,8 @@ ENDPROC(csum_partial)
 
 ENTRY(csum_partial)
 	CFI_STARTPROC
-	pushl_cfi %esi
-	CFI_REL_OFFSET esi, 0
-	pushl_cfi %ebx
-	CFI_REL_OFFSET ebx, 0
+	pushl_cfi_reg esi
+	pushl_cfi_reg ebx
 	movl 20(%esp),%eax	# Function arg: unsigned int sum
 	movl 16(%esp),%ecx	# Function arg: int len
 	movl 12(%esp),%esi	# Function arg:	const unsigned char *buf
@@ -251,14 +245,12 @@ ENTRY(csum_partial)
 	addl %ebx,%eax
 	adcl $0,%eax
 80: 
-	testl $1, 12(%esp)
+	testb $1, 12(%esp)
 	jz 90f
 	roll $8, %eax
 90: 
-	popl_cfi %ebx
-	CFI_RESTORE ebx
-	popl_cfi %esi
-	CFI_RESTORE esi
+	popl_cfi_reg ebx
+	popl_cfi_reg esi
 	ret
 	CFI_ENDPROC
 ENDPROC(csum_partial)
@@ -298,12 +290,9 @@ ENTRY(csum_partial_copy_generic)
 	CFI_STARTPROC
 	subl  $4,%esp	
 	CFI_ADJUST_CFA_OFFSET 4
-	pushl_cfi %edi
-	CFI_REL_OFFSET edi, 0
-	pushl_cfi %esi
-	CFI_REL_OFFSET esi, 0
-	pushl_cfi %ebx
-	CFI_REL_OFFSET ebx, 0
+	pushl_cfi_reg edi
+	pushl_cfi_reg esi
+	pushl_cfi_reg ebx
 	movl ARGBASE+16(%esp),%eax	# sum
 	movl ARGBASE+12(%esp),%ecx	# len
 	movl ARGBASE+4(%esp),%esi	# src
@@ -412,12 +401,9 @@ DST(	movb %cl, (%edi)	)
 
 .previous
 
-	popl_cfi %ebx
-	CFI_RESTORE ebx
-	popl_cfi %esi
-	CFI_RESTORE esi
-	popl_cfi %edi
-	CFI_RESTORE edi
+	popl_cfi_reg ebx
+	popl_cfi_reg esi
+	popl_cfi_reg edi
 	popl_cfi %ecx			# equivalent to addl $4,%esp
 	ret	
 	CFI_ENDPROC
@@ -441,12 +427,9 @@ ENDPROC(csum_partial_copy_generic)
 		
 ENTRY(csum_partial_copy_generic)
 	CFI_STARTPROC
-	pushl_cfi %ebx
-	CFI_REL_OFFSET ebx, 0
-	pushl_cfi %edi
-	CFI_REL_OFFSET edi, 0
-	pushl_cfi %esi
-	CFI_REL_OFFSET esi, 0
+	pushl_cfi_reg ebx
+	pushl_cfi_reg edi
+	pushl_cfi_reg esi
 	movl ARGBASE+4(%esp),%esi	#src
 	movl ARGBASE+8(%esp),%edi	#dst	
 	movl ARGBASE+12(%esp),%ecx	#len
@@ -506,12 +489,9 @@ DST(	movb %dl, (%edi)         )
 	jmp  7b			
 .previous				
 
-	popl_cfi %esi
-	CFI_RESTORE esi
-	popl_cfi %edi
-	CFI_RESTORE edi
-	popl_cfi %ebx
-	CFI_RESTORE ebx
+	popl_cfi_reg esi
+	popl_cfi_reg edi
+	popl_cfi_reg ebx
 	ret
 	CFI_ENDPROC
 ENDPROC(csum_partial_copy_generic)
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index f2145cfa12a6..e67e579c93bd 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -1,31 +1,35 @@
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
 /*
- * Zero a page. 	
- * rdi	page
- */			
-ENTRY(clear_page_c)
+ * Most CPUs support enhanced REP MOVSB/STOSB instructions. It is
+ * recommended to use this when possible and we do use them by default.
+ * If enhanced REP MOVSB/STOSB is not available, try to use fast string.
+ * Otherwise, use original.
+ */
+
+/*
+ * Zero a page.
+ * %rdi	- page
+ */
+ENTRY(clear_page)
 	CFI_STARTPROC
+
+	ALTERNATIVE_2 "jmp clear_page_orig", "", X86_FEATURE_REP_GOOD, \
+		      "jmp clear_page_c_e", X86_FEATURE_ERMS
+
 	movl $4096/8,%ecx
 	xorl %eax,%eax
 	rep stosq
 	ret
 	CFI_ENDPROC
-ENDPROC(clear_page_c)
+ENDPROC(clear_page)
 
-ENTRY(clear_page_c_e)
+ENTRY(clear_page_orig)
 	CFI_STARTPROC
-	movl $4096,%ecx
-	xorl %eax,%eax
-	rep stosb
-	ret
-	CFI_ENDPROC
-ENDPROC(clear_page_c_e)
 
-ENTRY(clear_page)
-	CFI_STARTPROC
 	xorl   %eax,%eax
 	movl   $4096/64,%ecx
 	.p2align 4
@@ -45,29 +49,13 @@ ENTRY(clear_page)
 	nop
 	ret
 	CFI_ENDPROC
-.Lclear_page_end:
-ENDPROC(clear_page)
-
-	/*
-	 * Some CPUs support enhanced REP MOVSB/STOSB instructions.
-	 * It is recommended to use this when possible.
-	 * If enhanced REP MOVSB/STOSB is not available, try to use fast string.
-	 * Otherwise, use original function.
-	 *
-	 */
+ENDPROC(clear_page_orig)
 
-#include <asm/cpufeature.h>
-
-	.section .altinstr_replacement,"ax"
-1:	.byte 0xeb					/* jmp <disp8> */
-	.byte (clear_page_c - clear_page) - (2f - 1b)	/* offset */
-2:	.byte 0xeb					/* jmp <disp8> */
-	.byte (clear_page_c_e - clear_page) - (3f - 2b)	/* offset */
-3:
-	.previous
-	.section .altinstructions,"a"
-	altinstruction_entry clear_page,1b,X86_FEATURE_REP_GOOD,\
-			     .Lclear_page_end-clear_page, 2b-1b
-	altinstruction_entry clear_page,2b,X86_FEATURE_ERMS,   \
-			     .Lclear_page_end-clear_page,3b-2b
-	.previous
+ENTRY(clear_page_c_e)
+	CFI_STARTPROC
+	movl $4096,%ecx
+	xorl %eax,%eax
+	rep stosb
+	ret
+	CFI_ENDPROC
+ENDPROC(clear_page_c_e)
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 176cca67212b..8239dbcbf984 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -2,23 +2,26 @@
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
+/*
+ * Some CPUs run faster using the string copy instructions (sane microcode).
+ * It is also a lot simpler. Use this when possible. But, don't use streaming
+ * copy unless the CPU indicates X86_FEATURE_REP_GOOD. Could vary the
+ * prefetch distance based on SMP/UP.
+ */
 	ALIGN
-copy_page_rep:
+ENTRY(copy_page)
 	CFI_STARTPROC
+	ALTERNATIVE "jmp copy_page_regs", "", X86_FEATURE_REP_GOOD
 	movl	$4096/8, %ecx
 	rep	movsq
 	ret
 	CFI_ENDPROC
-ENDPROC(copy_page_rep)
-
-/*
- *  Don't use streaming copy unless the CPU indicates X86_FEATURE_REP_GOOD.
- *  Could vary the prefetch distance based on SMP/UP.
-*/
+ENDPROC(copy_page)
 
-ENTRY(copy_page)
+ENTRY(copy_page_regs)
 	CFI_STARTPROC
 	subq	$2*8,	%rsp
 	CFI_ADJUST_CFA_OFFSET 2*8
@@ -90,21 +93,5 @@ ENTRY(copy_page)
 	addq	$2*8, %rsp
 	CFI_ADJUST_CFA_OFFSET -2*8
 	ret
-.Lcopy_page_end:
 	CFI_ENDPROC
-ENDPROC(copy_page)
-
-	/* Some CPUs run faster using the string copy instructions.
-	   It is also a lot simpler. Use this when possible */
-
-#include <asm/cpufeature.h>
-
-	.section .altinstr_replacement,"ax"
-1:	.byte 0xeb					/* jmp <disp8> */
-	.byte (copy_page_rep - copy_page) - (2f - 1b)	/* offset */
-2:
-	.previous
-	.section .altinstructions,"a"
-	altinstruction_entry copy_page, 1b, X86_FEATURE_REP_GOOD,	\
-		.Lcopy_page_end-copy_page, 2b-1b
-	.previous
+ENDPROC(copy_page_regs)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dee945d55594..fa997dfaef24 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -8,9 +8,6 @@
 
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
-
-#define FIX_ALIGNMENT 1
-
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
@@ -19,33 +16,7 @@
 #include <asm/asm.h>
 #include <asm/smap.h>
 
-/*
- * By placing feature2 after feature1 in altinstructions section, we logically
- * implement:
- * If CPU has feature2, jmp to alt2 is used
- * else if CPU has feature1, jmp to alt1 is used
- * else jmp to orig is used.
- */
-	.macro ALTERNATIVE_JUMP feature1,feature2,orig,alt1,alt2
-0:
-	.byte 0xe9	/* 32bit jump */
-	.long \orig-1f	/* by default jump to orig */
-1:
-	.section .altinstr_replacement,"ax"
-2:	.byte 0xe9			/* near jump with 32bit immediate */
-	.long \alt1-1b /* offset */   /* or alternatively to alt1 */
-3:	.byte 0xe9			/* near jump with 32bit immediate */
-	.long \alt2-1b /* offset */   /* or alternatively to alt2 */
-	.previous
-
-	.section .altinstructions,"a"
-	altinstruction_entry 0b,2b,\feature1,5,5
-	altinstruction_entry 0b,3b,\feature2,5,5
-	.previous
-	.endm
-
 	.macro ALIGN_DESTINATION
-#ifdef FIX_ALIGNMENT
 	/* check for bad alignment of destination */
 	movl %edi,%ecx
 	andl $7,%ecx
@@ -67,7 +38,6 @@
 
 	_ASM_EXTABLE(100b,103b)
 	_ASM_EXTABLE(101b,103b)
-#endif
 	.endm
 
 /* Standard copy_to_user with segment limit checking */
@@ -79,9 +49,11 @@ ENTRY(_copy_to_user)
 	jc bad_to_user
 	cmpq TI_addr_limit(%rax),%rcx
 	ja bad_to_user
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS,	\
-		copy_user_generic_unrolled,copy_user_generic_string,	\
-		copy_user_enhanced_fast_string
+	ALTERNATIVE_2 "jmp copy_user_generic_unrolled",		\
+		      "jmp copy_user_generic_string",		\
+		      X86_FEATURE_REP_GOOD,			\
+		      "jmp copy_user_enhanced_fast_string",	\
+		      X86_FEATURE_ERMS
 	CFI_ENDPROC
 ENDPROC(_copy_to_user)
 
@@ -94,9 +66,11 @@ ENTRY(_copy_from_user)
 	jc bad_from_user
 	cmpq TI_addr_limit(%rax),%rcx
 	ja bad_from_user
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,X86_FEATURE_ERMS,	\
-		copy_user_generic_unrolled,copy_user_generic_string,	\
-		copy_user_enhanced_fast_string
+	ALTERNATIVE_2 "jmp copy_user_generic_unrolled",		\
+		      "jmp copy_user_generic_string",		\
+		      X86_FEATURE_REP_GOOD,			\
+		      "jmp copy_user_enhanced_fast_string",	\
+		      X86_FEATURE_ERMS
 	CFI_ENDPROC
 ENDPROC(_copy_from_user)
 
diff --git a/arch/x86/lib/csum-copy_64.S b/arch/x86/lib/csum-copy_64.S
index 2419d5fefae3..9734182966f3 100644
--- a/arch/x86/lib/csum-copy_64.S
+++ b/arch/x86/lib/csum-copy_64.S
@@ -196,7 +196,7 @@ ENTRY(csum_partial_copy_generic)
 
 	/* handle last odd byte */
 .Lhandle_1:
-	testl $1, %r10d
+	testb $1, %r10b
 	jz    .Lende
 	xorl  %ebx, %ebx
 	source
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 1313ae6b478b..8f72b334aea0 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -52,6 +52,13 @@
  */
 void insn_init(struct insn *insn, const void *kaddr, int buf_len, int x86_64)
 {
+	/*
+	 * Instructions longer than MAX_INSN_SIZE (15 bytes) are invalid
+	 * even if the input buffer is long enough to hold them.
+	 */
+	if (buf_len > MAX_INSN_SIZE)
+		buf_len = MAX_INSN_SIZE;
+
 	memset(insn, 0, sizeof(*insn));
 	insn->kaddr = kaddr;
 	insn->end_kaddr = kaddr + buf_len;
@@ -164,6 +171,12 @@ found:
 				/* VEX.W overrides opnd_size */
 				insn->opnd_bytes = 8;
 		} else {
+			/*
+			 * For VEX2, fake VEX3-like byte#2.
+			 * Makes it easier to decode vex.W, vex.vvvv,
+			 * vex.L and vex.pp. Masking with 0x7f sets vex.W == 0.
+			 */
+			insn->vex_prefix.bytes[2] = b2 & 0x7f;
 			insn->vex_prefix.nbytes = 2;
 			insn->next_byte += 2;
 		}
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 89b53c9968e7..b046664f5a1c 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -1,12 +1,20 @@
 /* Copyright 2002 Andi Kleen */
 
 #include <linux/linkage.h>
-
 #include <asm/cpufeature.h>
 #include <asm/dwarf2.h>
 #include <asm/alternative-asm.h>
 
 /*
+ * We build a jump to memcpy_orig by default which gets NOPped out on
+ * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which
+ * have the enhanced REP MOVSB/STOSB feature (ERMS), change those NOPs
+ * to a jmp to memcpy_erms which does the REP; MOVSB mem copy.
+ */
+
+.weak memcpy
+
+/*
  * memcpy - Copy a memory block.
  *
  * Input:
@@ -17,15 +25,11 @@
  * Output:
  * rax original destination
  */
+ENTRY(__memcpy)
+ENTRY(memcpy)
+	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
+		      "jmp memcpy_erms", X86_FEATURE_ERMS
 
-/*
- * memcpy_c() - fast string ops (REP MOVSQ) based variant.
- *
- * This gets patched over the unrolled variant (below) via the
- * alternative instructions framework:
- */
-	.section .altinstr_replacement, "ax", @progbits
-.Lmemcpy_c:
 	movq %rdi, %rax
 	movq %rdx, %rcx
 	shrq $3, %rcx
@@ -34,29 +38,21 @@
 	movl %edx, %ecx
 	rep movsb
 	ret
-.Lmemcpy_e:
-	.previous
+ENDPROC(memcpy)
+ENDPROC(__memcpy)
 
 /*
- * memcpy_c_e() - enhanced fast string memcpy. This is faster and simpler than
- * memcpy_c. Use memcpy_c_e when possible.
- *
- * This gets patched over the unrolled variant (below) via the
- * alternative instructions framework:
+ * memcpy_erms() - enhanced fast string memcpy. This is faster and
+ * simpler than memcpy. Use memcpy_erms when possible.
  */
-	.section .altinstr_replacement, "ax", @progbits
-.Lmemcpy_c_e:
+ENTRY(memcpy_erms)
 	movq %rdi, %rax
 	movq %rdx, %rcx
 	rep movsb
 	ret
-.Lmemcpy_e_e:
-	.previous
-
-.weak memcpy
+ENDPROC(memcpy_erms)
 
-ENTRY(__memcpy)
-ENTRY(memcpy)
+ENTRY(memcpy_orig)
 	CFI_STARTPROC
 	movq %rdi, %rax
 
@@ -183,26 +179,4 @@ ENTRY(memcpy)
 .Lend:
 	retq
 	CFI_ENDPROC
-ENDPROC(memcpy)
-ENDPROC(__memcpy)
-
-	/*
-	 * Some CPUs are adding enhanced REP MOVSB/STOSB feature
-	 * If the feature is supported, memcpy_c_e() is the first choice.
-	 * If enhanced rep movsb copy is not available, use fast string copy
-	 * memcpy_c() when possible. This is faster and code is simpler than
-	 * original memcpy().
-	 * Otherwise, original memcpy() is used.
-	 * In .altinstructions section, ERMS feature is placed after REG_GOOD
-         * feature to implement the right patch order.
-	 *
-	 * Replace only beginning, memcpy is used to apply alternatives,
-	 * so it is silly to overwrite itself with nops - reboot is the
-	 * only outcome...
-	 */
-	.section .altinstructions, "a"
-	altinstruction_entry __memcpy,.Lmemcpy_c,X86_FEATURE_REP_GOOD,\
-			     .Lmemcpy_e-.Lmemcpy_c,.Lmemcpy_e-.Lmemcpy_c
-	altinstruction_entry __memcpy,.Lmemcpy_c_e,X86_FEATURE_ERMS, \
-			     .Lmemcpy_e_e-.Lmemcpy_c_e,.Lmemcpy_e_e-.Lmemcpy_c_e
-	.previous
+ENDPROC(memcpy_orig)
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 9c4b530575da..0f8a0d0331b9 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -5,7 +5,6 @@
  * This assembly file is re-written from memmove_64.c file.
  *	- Copyright 2011 Fenghua Yu <fenghua.yu@intel.com>
  */
-#define _STRING_C
 #include <linux/linkage.h>
 #include <asm/dwarf2.h>
 #include <asm/cpufeature.h>
@@ -44,6 +43,8 @@ ENTRY(__memmove)
 	jg 2f
 
 .Lmemmove_begin_forward:
+	ALTERNATIVE "", "movq %rdx, %rcx; rep movsb; retq", X86_FEATURE_ERMS
+
 	/*
 	 * movsq instruction have many startup latency
 	 * so we handle small size by general register.
@@ -207,21 +208,5 @@ ENTRY(__memmove)
 13:
 	retq
 	CFI_ENDPROC
-
-	.section .altinstr_replacement,"ax"
-.Lmemmove_begin_forward_efs:
-	/* Forward moving data. */
-	movq %rdx, %rcx
-	rep movsb
-	retq
-.Lmemmove_end_forward_efs:
-	.previous
-
-	.section .altinstructions,"a"
-	altinstruction_entry .Lmemmove_begin_forward,		\
-		.Lmemmove_begin_forward_efs,X86_FEATURE_ERMS,	\
-		.Lmemmove_end_forward-.Lmemmove_begin_forward,	\
-		.Lmemmove_end_forward_efs-.Lmemmove_begin_forward_efs
-	.previous
 ENDPROC(__memmove)
 ENDPROC(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 6f44935c6a60..93118fb23976 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -5,19 +5,30 @@
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
 
+.weak memset
+
 /*
  * ISO C memset - set a memory block to a byte value. This function uses fast
  * string to get better performance than the original function. The code is
  * simpler and shorter than the orignal function as well.
- *	
+ *
  * rdi   destination
- * rsi   value (char) 
- * rdx   count (bytes) 
- * 
+ * rsi   value (char)
+ * rdx   count (bytes)
+ *
  * rax   original destination
- */	
-	.section .altinstr_replacement, "ax", @progbits
-.Lmemset_c:
+ */
+ENTRY(memset)
+ENTRY(__memset)
+	/*
+	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
+	 * to use it when possible. If not available, use fast string instructions.
+	 *
+	 * Otherwise, use original memset function.
+	 */
+	ALTERNATIVE_2 "jmp memset_orig", "", X86_FEATURE_REP_GOOD, \
+		      "jmp memset_erms", X86_FEATURE_ERMS
+
 	movq %rdi,%r9
 	movq %rdx,%rcx
 	andl $7,%edx
@@ -31,8 +42,8 @@
 	rep stosb
 	movq %r9,%rax
 	ret
-.Lmemset_e:
-	.previous
+ENDPROC(memset)
+ENDPROC(__memset)
 
 /*
  * ISO C memset - set a memory block to a byte value. This function uses
@@ -45,21 +56,16 @@
  *
  * rax   original destination
  */
-	.section .altinstr_replacement, "ax", @progbits
-.Lmemset_c_e:
+ENTRY(memset_erms)
 	movq %rdi,%r9
 	movb %sil,%al
 	movq %rdx,%rcx
 	rep stosb
 	movq %r9,%rax
 	ret
-.Lmemset_e_e:
-	.previous
-
-.weak memset
+ENDPROC(memset_erms)
 
-ENTRY(memset)
-ENTRY(__memset)
+ENTRY(memset_orig)
 	CFI_STARTPROC
 	movq %rdi,%r10
 
@@ -134,23 +140,4 @@ ENTRY(__memset)
 	jmp .Lafter_bad_alignment
 .Lfinal:
 	CFI_ENDPROC
-ENDPROC(memset)
-ENDPROC(__memset)
-
-	/* Some CPUs support enhanced REP MOVSB/STOSB feature.
-	 * It is recommended to use this when possible.
-	 *
-	 * If enhanced REP MOVSB/STOSB feature is not available, use fast string
-	 * instructions.
-	 *
-	 * Otherwise, use original memset function.
-	 *
-	 * In .altinstructions section, ERMS feature is placed after REG_GOOD
-         * feature to implement the right patch order.
-	 */
-	.section .altinstructions,"a"
-	altinstruction_entry __memset,.Lmemset_c,X86_FEATURE_REP_GOOD,\
-			     .Lfinal-__memset,.Lmemset_e-.Lmemset_c
-	altinstruction_entry __memset,.Lmemset_c_e,X86_FEATURE_ERMS, \
-			     .Lfinal-__memset,.Lmemset_e_e-.Lmemset_c_e
-	.previous
+ENDPROC(memset_orig)
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index f6d13eefad10..3ca5218fbece 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -14,8 +14,8 @@
 .macro op_safe_regs op
 ENTRY(\op\()_safe_regs)
 	CFI_STARTPROC
-	pushq_cfi %rbx
-	pushq_cfi %rbp
+	pushq_cfi_reg rbx
+	pushq_cfi_reg rbp
 	movq	%rdi, %r10	/* Save pointer */
 	xorl	%r11d, %r11d	/* Return value */
 	movl    (%rdi), %eax
@@ -35,8 +35,8 @@ ENTRY(\op\()_safe_regs)
 	movl    %ebp, 20(%r10)
 	movl    %esi, 24(%r10)
 	movl    %edi, 28(%r10)
-	popq_cfi %rbp
-	popq_cfi %rbx
+	popq_cfi_reg rbp
+	popq_cfi_reg rbx
 	ret
 3:
 	CFI_RESTORE_STATE
@@ -53,10 +53,10 @@ ENDPROC(\op\()_safe_regs)
 .macro op_safe_regs op
 ENTRY(\op\()_safe_regs)
 	CFI_STARTPROC
-	pushl_cfi %ebx
-	pushl_cfi %ebp
-	pushl_cfi %esi
-	pushl_cfi %edi
+	pushl_cfi_reg ebx
+	pushl_cfi_reg ebp
+	pushl_cfi_reg esi
+	pushl_cfi_reg edi
 	pushl_cfi $0              /* Return value */
 	pushl_cfi %eax
 	movl    4(%eax), %ecx
@@ -80,10 +80,10 @@ ENTRY(\op\()_safe_regs)
 	movl    %esi, 24(%eax)
 	movl    %edi, 28(%eax)
 	popl_cfi %eax
-	popl_cfi %edi
-	popl_cfi %esi
-	popl_cfi %ebp
-	popl_cfi %ebx
+	popl_cfi_reg edi
+	popl_cfi_reg esi
+	popl_cfi_reg ebp
+	popl_cfi_reg ebx
 	ret
 3:
 	CFI_RESTORE_STATE
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 5dff5f042468..2322abe4da3b 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -34,10 +34,10 @@
  */
 
 #define save_common_regs \
-	pushl_cfi %ecx; CFI_REL_OFFSET ecx, 0
+	pushl_cfi_reg ecx
 
 #define restore_common_regs \
-	popl_cfi %ecx; CFI_RESTORE ecx
+	popl_cfi_reg ecx
 
 	/* Avoid uglifying the argument copying x86-64 needs to do. */
 	.macro movq src, dst
@@ -64,22 +64,22 @@
  */
 
 #define save_common_regs \
-	pushq_cfi %rdi; CFI_REL_OFFSET rdi, 0; \
-	pushq_cfi %rsi; CFI_REL_OFFSET rsi, 0; \
-	pushq_cfi %rcx; CFI_REL_OFFSET rcx, 0; \
-	pushq_cfi %r8;  CFI_REL_OFFSET r8,  0; \
-	pushq_cfi %r9;  CFI_REL_OFFSET r9,  0; \
-	pushq_cfi %r10; CFI_REL_OFFSET r10, 0; \
-	pushq_cfi %r11; CFI_REL_OFFSET r11, 0
+	pushq_cfi_reg rdi; \
+	pushq_cfi_reg rsi; \
+	pushq_cfi_reg rcx; \
+	pushq_cfi_reg r8;  \
+	pushq_cfi_reg r9;  \
+	pushq_cfi_reg r10; \
+	pushq_cfi_reg r11
 
 #define restore_common_regs \
-	popq_cfi %r11; CFI_RESTORE r11; \
-	popq_cfi %r10; CFI_RESTORE r10; \
-	popq_cfi %r9;  CFI_RESTORE r9; \
-	popq_cfi %r8;  CFI_RESTORE r8; \
-	popq_cfi %rcx; CFI_RESTORE rcx; \
-	popq_cfi %rsi; CFI_RESTORE rsi; \
-	popq_cfi %rdi; CFI_RESTORE rdi
+	popq_cfi_reg r11; \
+	popq_cfi_reg r10; \
+	popq_cfi_reg r9; \
+	popq_cfi_reg r8; \
+	popq_cfi_reg rcx; \
+	popq_cfi_reg rsi; \
+	popq_cfi_reg rdi
 
 #endif
 
@@ -87,12 +87,10 @@
 ENTRY(call_rwsem_down_read_failed)
 	CFI_STARTPROC
 	save_common_regs
-	__ASM_SIZE(push,_cfi) %__ASM_REG(dx)
-	CFI_REL_OFFSET __ASM_REG(dx), 0
+	__ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_down_read_failed
-	__ASM_SIZE(pop,_cfi) %__ASM_REG(dx)
-	CFI_RESTORE __ASM_REG(dx)
+	__ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
 	restore_common_regs
 	ret
 	CFI_ENDPROC
@@ -124,12 +122,10 @@ ENDPROC(call_rwsem_wake)
 ENTRY(call_rwsem_downgrade_wake)
 	CFI_STARTPROC
 	save_common_regs
-	__ASM_SIZE(push,_cfi) %__ASM_REG(dx)
-	CFI_REL_OFFSET __ASM_REG(dx), 0
+	__ASM_SIZE(push,_cfi_reg) __ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_downgrade_wake
-	__ASM_SIZE(pop,_cfi) %__ASM_REG(dx)
-	CFI_RESTORE __ASM_REG(dx)
+	__ASM_SIZE(pop,_cfi_reg) __ASM_REG(dx)
 	restore_common_regs
 	ret
 	CFI_ENDPROC
diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/lib/thunk_32.S
index e28cdaf5ac2c..5eb715087b80 100644
--- a/arch/x86/lib/thunk_32.S
+++ b/arch/x86/lib/thunk_32.S
@@ -13,12 +13,9 @@
 	.globl \name
 \name:
 	CFI_STARTPROC
-	pushl_cfi %eax
-	CFI_REL_OFFSET eax, 0
-	pushl_cfi %ecx
-	CFI_REL_OFFSET ecx, 0
-	pushl_cfi %edx
-	CFI_REL_OFFSET edx, 0
+	pushl_cfi_reg eax
+	pushl_cfi_reg ecx
+	pushl_cfi_reg edx
 
 	.if \put_ret_addr_in_eax
 	/* Place EIP in the arg1 */
@@ -26,12 +23,9 @@
 	.endif
 
 	call \func
-	popl_cfi %edx
-	CFI_RESTORE edx
-	popl_cfi %ecx
-	CFI_RESTORE ecx
-	popl_cfi %eax
-	CFI_RESTORE eax
+	popl_cfi_reg edx
+	popl_cfi_reg ecx
+	popl_cfi_reg eax
 	ret
 	CFI_ENDPROC
 	_ASM_NOKPROBE(\name)
diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S
index b30b5ebd614a..f89ba4e93025 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/lib/thunk_64.S
@@ -17,9 +17,18 @@
 	CFI_STARTPROC
 
 	/* this one pushes 9 elems, the next one would be %rIP */
-	SAVE_ARGS
+	pushq_cfi_reg rdi
+	pushq_cfi_reg rsi
+	pushq_cfi_reg rdx
+	pushq_cfi_reg rcx
+	pushq_cfi_reg rax
+	pushq_cfi_reg r8
+	pushq_cfi_reg r9
+	pushq_cfi_reg r10
+	pushq_cfi_reg r11
 
 	.if \put_ret_addr_in_rdi
+	/* 9*8(%rsp) is return addr on stack */
 	movq_cfi_restore 9*8, rdi
 	.endif
 
@@ -45,11 +54,22 @@
 #endif
 #endif
 
-	/* SAVE_ARGS below is used only for the .cfi directives it contains. */
+#if defined(CONFIG_TRACE_IRQFLAGS) \
+ || defined(CONFIG_DEBUG_LOCK_ALLOC) \
+ || defined(CONFIG_PREEMPT)
 	CFI_STARTPROC
-	SAVE_ARGS
+	CFI_ADJUST_CFA_OFFSET 9*8
 restore:
-	RESTORE_ARGS
+	popq_cfi_reg r11
+	popq_cfi_reg r10
+	popq_cfi_reg r9
+	popq_cfi_reg r8
+	popq_cfi_reg rax
+	popq_cfi_reg rcx
+	popq_cfi_reg rdx
+	popq_cfi_reg rsi
+	popq_cfi_reg rdi
 	ret
 	CFI_ENDPROC
 	_ASM_NOKPROBE(restore)
+#endif
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index c905e89e19fe..1f33b3d1fd68 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -69,21 +69,20 @@ EXPORT_SYMBOL(copy_in_user);
  * it is not necessary to optimize tail handling.
  */
 __visible unsigned long
-copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest)
+copy_user_handle_tail(char *to, char *from, unsigned len)
 {
-	char c;
-	unsigned zero_len;
-
 	for (; len; --len, to++) {
+		char c;
+
 		if (__get_user_nocheck(c, from++, sizeof(char)))
 			break;
 		if (__put_user_nocheck(c, to, sizeof(char)))
 			break;
 	}
-
-	for (c = 0, zero_len = len; zerorest && zero_len; --zero_len)
-		if (__put_user_nocheck(c, to++, sizeof(char)))
-			break;
 	clac();
+
+	/* If the destination is a kernel buffer, we always clear the end */
+	if ((unsigned long)to >= TASK_SIZE_MAX)
+		memset(to, 0, len);
 	return len;
 }
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index 1a2be7c6895d..816488c0b97e 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -273,6 +273,9 @@ dd: ESC
 de: ESC
 df: ESC
 # 0xe0 - 0xef
+# Note: "forced64" is Intel CPU behavior: they ignore 0x66 prefix
+# in 64-bit mode. AMD CPUs accept 0x66 prefix, it causes RIP truncation
+# to 16 bits. In 32-bit mode, 0x66 is accepted by both Intel and AMD.
 e0: LOOPNE/LOOPNZ Jb (f64)
 e1: LOOPE/LOOPZ Jb (f64)
 e2: LOOP Jb (f64)
@@ -281,6 +284,10 @@ e4: IN AL,Ib
 e5: IN eAX,Ib
 e6: OUT Ib,AL
 e7: OUT Ib,eAX
+# With 0x66 prefix in 64-bit mode, for AMD CPUs immediate offset
+# in "near" jumps and calls is 16-bit. For CALL,
+# push of return address is 16-bit wide, RSP is decremented by 2
+# but is not truncated to 16 bits, unlike RIP.
 e8: CALL Jz (f64)
 e9: JMP-near Jz (f64)
 ea: JMP-far Ap (i64)
@@ -456,6 +463,7 @@ AVXcode: 1
 7e: movd/q Ey,Pd | vmovd/q Ey,Vy (66),(v1) | vmovq Vq,Wq (F3),(v1)
 7f: movq Qq,Pq | vmovdqa Wx,Vx (66) | vmovdqu Wx,Vx (F3)
 # 0x0f 0x80-0x8f
+# Note: "forced64" is Intel CPU behavior (see comment about CALL insn).
 80: JO Jz (f64)
 81: JNO Jz (f64)
 82: JB/JC/JNAE Jz (f64)
@@ -842,6 +850,7 @@ EndTable
 GrpTable: Grp5
 0: INC Ev
 1: DEC Ev
+# Note: "forced64" is Intel CPU behavior (see comment about CALL insn).
 2: CALLN Ev (f64)
 3: CALLF Ep
 4: JMPN Ev (f64)